[MacPorts] #55727: Error: Failed to configure source-highlight

[MacPorts]

#55727: Error: Failed to configure source-highlight
-------------------------------+-------------------
  Reporter:  hlcstudy          |      Owner:
      Type:  defect            |     Status:  new
  Priority:  Normal            |  Milestone:
 Component:  ports             |    Version:  2.4.2
Resolution:                    |   Keywords:
      Port:  source-highlight  |
-------------------------------+-------------------

Old description:

> Hi Guys
>
> '''Specifications:'''
> MacOS High Sierra - Version 10.13.2
> CPU 2.4 i5
> 8BG Memory
>
> I download the High Sierra Macports and xcode-select version 2349
> installed and lience accepted. I ran the following command:
>
> to update my outdated ports;
> {{{
> sudo port upgrade outdated
> All was looking good when I got this error:
> Error: Failed to configure source-highlight, consult
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8/config.log
> Error: Failed to configure source-highlight: configure failure: command
> execution failed
> Error: See
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/main.log for details.
> Error: Problem while installing source-highlight
> Error: Follow https://guide.macports.org/#project.tickets to report a
> bug.
> --
> }}}
> I ran the python commands
> {{{
> Selecting 'python27' for 'python' succeeded. 'python27' is now active.
> KathrynusonsMBP:~ kevinferguson$ sudo port select --set python2 python27
> Selecting 'python27' for 'python2' succeeded. 'python27' is now active.
> }}}
> I then researched the above source highlights in tickets section:  It
> mentioned I should do a clean and install again.
> {{{
> sudo port clean source-highlight
> sudo port install source-highlight
> }}}
> After running the install command I received the error again below
> --
> {{{
> Error: Failed to configure source-highlight, consult
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8/config.log
> Error: Failed to configure source-highlight: configure failure: command
> execution failed
> Error: See
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/main.log for details.
> Error: Follow https://guide.macports.org/#project.tickets to report a
> bug.
> Error: Processing of port source-highlight failed
> }}}
> So I have logged a bug as per the error message.
>
> Here copy of log file can't see the attach button.
> --
> {{{
> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main boost 1.65.1_1 exists in the ports tree
> :debug:main boost 1.65.1_1 +no_single+no_static+python27 is the latest
> installed
> :debug:main boost 1.65.1_1 +no_single+no_static+python27 is active
> :debug:main Merging existing variants '+no_single+no_static+python27'
> into variants
> :debug:main new fully merged portvariants: no_static + no_single +
> python27 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/boost
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:main Sourcing PortGroup active_variants 1.1 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/active_variants-1.1.tcl
> :debug:main Sourcing PortGroup compilers 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compilers-1.0.tcl
> :debug:main Sourcing PortGroup mpi 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/mpi-1.0.tcl
> :debug:main compiler clang 900.0.39.2 not blacklisted because it doesn't
> match {clang < 421}
> :debug:main Unmatched blacklisted compiler: *gcc-4.0
> :debug:main Unmatched blacklisted compiler: gcc-3.3
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant python27 provides python27
> :debug:main Executing variant no_static provides no_static
> :debug:main Executing variant no_single provides no_single
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! boost 1.65.1_1 >= boost 1.65.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.11_0 exists in the ports tree
> :debug:main zlib 1.2.11_0  is the latest installed
> :debug:main zlib 1.2.11_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Sourcing PortGroup xcodeversion 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! zlib 1.2.11_0 >= zlib 1.2.11_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.2.5_0 exists in the ports tree
> :debug:main expat 2.2.5_0  is the latest installed
> :debug:main expat 2.2.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! expat 2.2.5_0 >= expat 2.2.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main bzip2 1.0.6_0 exists in the ports tree
> :debug:main bzip2 1.0.6_0  is the latest installed
> :debug:main bzip2 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.15_0 exists in the ports tree
> :debug:main libiconv 1.15_0  is the latest installed
> :debug:main libiconv 1.15_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! libiconv 1.15_0 >= libiconv 1.15_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main icu 58.2_2 exists in the ports tree
> :debug:main icu 58.2_2  is the latest installed
> :debug:main icu 58.2_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! icu 58.2_2 >= icu 58.2_2
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main python27 2.7.14_0 exists in the ports tree
> :debug:main python27 2.7.14_0  is the latest installed
> :debug:main python27 2.7.14_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Sourcing PortGroup select 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! python27 2.7.14_0 >= python27 2.7.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main db48 4.8.30_4 exists in the ports tree
> :debug:main db48 4.8.30_4  is the latest installed
> :debug:main db48 4.8.30_4  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db48
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! db48 4.8.30_4 >= db48 4.8.30_4
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main gettext 0.19.8.1_0 exists in the ports tree
> :debug:main gettext 0.19.8.1_0  is the latest installed
> :debug:main gettext 0.19.8.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Sourcing PortGroup compiler_blacklist_versions 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main compiler clang 900.0.39.2 not blacklisted because it doesn't
> match {clang < 211.10.1}
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! gettext 0.19.8.1_0 >= gettext 0.19.8.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 6.0-20171125_0 exists in the ports tree
> :debug:main ncurses 6.0-20171125_0  is the latest installed
> :debug:main ncurses 6.0-20171125_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! ncurses 6.0-20171125_0 >= ncurses
> 6.0-20171125_0
> :debug:main epoch: in tree: 20090923 installed: 20090923
> :debug:main libedit 20170329-3.1_2 exists in the ports tree
> :debug:main libedit 20170329-3.1_2  is the latest installed
> :debug:main libedit 20170329-3.1_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! libedit 20170329-3.1_2 >= libedit
> 20170329-3.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libffi 3.2.1_0 exists in the ports tree
> :debug:main libffi 3.2.1_0  is the latest installed
> :debug:main libffi 3.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! libffi 3.2.1_0 >= libffi 3.2.1_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.2n_0 exists in the ports tree
> :debug:main openssl 1.0.2n_0  is the latest installed
> :debug:main openssl 1.0.2n_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Sourcing PortGroup muniversal 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! openssl 1.0.2n_0 >= openssl 1.0.2n_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main sqlite3 3.21.0_0 exists in the ports tree
> :debug:main sqlite3 3.21.0_0  is the latest installed
> :debug:main sqlite3 3.21.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! sqlite3 3.21.0_0 >= sqlite3 3.21.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python_select 0.3_7 exists in the ports tree
> :debug:main python_select 0.3_7  is the latest installed
> :debug:main python_select 0.3_7  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Sourcing PortGroup select 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! python_select 0.3_7 >= python_select
> 0.3_7
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python2_select 0.0_2 exists in the ports tree
> :debug:main python2_select 0.0_2  is the latest installed
> :debug:main python2_select 0.0_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python2_select
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main Sourcing PortGroup select 1.0 from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! python2_select 0.0_2 >= python2_select
> 0.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ctags 5.8_2 exists in the ports tree
> :debug:main ctags 5.8_2  is the latest installed
> :debug:main ctags 5.8_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ctags
> :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Finished running callback
> portconfigure::add_automatic_compiler_dependencies
> :debug:main Running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main Finished running callback
> portbuild::add_automatic_buildsystem_dependencies
> :debug:main No need to upgrade! ctags 5.8_2 >= ctags 5.8_2
> :msg:main --->  Computing dependencies for source-highlight:info:main
> .:debug:main source-highlight has no conflicts
> :debug:main Searching for dependency: boost
> :debug:main Found Dependency: receipt exists for boost
> :debug:main Searching for dependency: ctags
> :debug:main Found Dependency: receipt exists for ctags
> :debug:main Executing org.macports.main (source-highlight)
> :debug:main dropping privileges: euid changed to 505, egid changed to
> 502.
> :debug:archivefetch archivefetch phase started at Sat Jan 20 15:32:06 GMT
> 2018
> :msg:archivefetch --->  Fetching archive for source-highlight
> :debug:archivefetch Executing org.macports.archivefetch (source-
> highlight)
> :debug:archivefetch euid/egid changed to: 0/0
> :debug:archivefetch chowned /opt/local/var/macports/incoming to macports
> :debug:archivefetch euid/egid changed to: 505/502
> :info:archivefetch --->  source-highlight-3.1.8_2.darwin_17.x86_64.tbz2
> doesn't seem to exist in /opt/local/var/macports/incoming/verified
> :msg:archivefetch --->  Attempting to fetch source-
> highlight-3.1.8_2.darwin_17.x86_64.tbz2 from
> https://packages.macports.org/source-highlight
> :debug:archivefetch Fetching archive failed: The requested URL returned
> error: 404 Not Found
> :msg:archivefetch --->  Attempting to fetch source-
> highlight-3.1.8_2.darwin_17.x86_64.tbz2 from
> http://mse.uk.packages.macports.org/sites/packages.macports.org/source-
> highlight
> :debug:archivefetch Fetching archive failed: The requested URL returned
> error: 404 Not Found
> :msg:archivefetch --->  Attempting to fetch source-
> highlight-3.1.8_2.darwin_17.x86_64.tbz2 from
> http://lil.fr.packages.macports.org/source-highlight
> :debug:archivefetch Fetching archive failed: The requested URL returned
> error: 404 Not Found
> :debug:archivefetch Privilege de-escalation not attempted as not running
> as root.
> :debug:fetch fetch phase started at Sat Jan 20 15:32:06 GMT 2018
> :notice:fetch --->  Fetching distfiles for source-highlight
> :debug:fetch Executing org.macports.fetch (source-highlight)
> :debug:fetch Privilege de-escalation not attempted as not running as
> root.
> :debug:checksum checksum phase started at Sat Jan 20 15:32:06 GMT 2018
> :notice:checksum --->  Verifying checksums for source-highlight
> :debug:checksum Executing org.macports.checksum (source-highlight)
> :info:checksum --->  Checksumming source-highlight-3.1.8.tar.gz
> :debug:checksum Calculated (rmd160) is
> a6e0ad1713deb2056984a97adc7dfd0e6610809f
> :debug:checksum Correct (rmd160) checksum for source-
> highlight-3.1.8.tar.gz
> :debug:checksum Calculated (sha256) is
> 01336a7ea1d1ccc374201f7b81ffa94d0aecb33afc7d6903ebf9fbf33a55ada3
> :debug:checksum Correct (sha256) checksum for source-
> highlight-3.1.8.tar.gz
> :debug:checksum Privilege de-escalation not attempted as not running as
> root.
> :debug:extract extract phase started at Sat Jan 20 15:32:06 GMT 2018
> :notice:extract --->  Extracting source-highlight
> :debug:extract Executing org.macports.extract (source-highlight)
> :info:extract --->  Extracting source-highlight-3.1.8.tar.gz
> :debug:extract setting option extract.args to
> '/opt/local/var/macports/distfiles/source-highlight/source-
> highlight-3.1.8.tar.gz'
> :debug:extract Environment:
> :debug:extract CC_PRINT_OPTIONS='YES'
> :debug:extract
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/.CC_PRINT_OPTIONS'
> :debug:extract CPATH='/opt/local/include'
> :debug:extract LIBRARY_PATH='/opt/local/lib'
> :debug:extract MACOSX_DEPLOYMENT_TARGET='10.13'
> :info:extract Executing:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles
> /source-highlight/source-highlight-3.1.8.tar.gz' | /usr/bin/tar -xf -
> :debug:extract system:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles
> /source-highlight/source-highlight-3.1.8.tar.gz' | /usr/bin/tar -xf -
> :debug:extract euid/egid changed to: 0/0
> :debug:extract chowned
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work to macports
> :debug:extract euid/egid changed to: 505/502
> :debug:extract Privilege de-escalation not attempted as not running as
> root.
> :debug:patch patch phase started at Sat Jan 20 15:32:07 GMT 2018
> :debug:patch Executing org.macports.patch (source-highlight)
> :debug:patch Privilege de-escalation not attempted as not running as
> root.
> :debug:configure configure phase started at Sat Jan 20 15:32:07 GMT 2018
> :notice:configure --->  Configuring source-highlight
> :debug:configure Preferred compilers: clang macports-clang-4.0
> :debug:configure Using compiler 'Xcode Clang'
> :debug:configure Executing org.macports.configure (source-highlight)
> :debug:configure Environment:
> :debug:configure CC='/usr/bin/clang'
> :debug:configure CC_PRINT_OPTIONS='YES'
> :debug:configure
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/.CC_PRINT_OPTIONS'
> :debug:configure CFLAGS='-pipe -Os -arch x86_64'
> :debug:configure CPATH='/opt/local/include'
> :debug:configure CPPFLAGS='-I/opt/local/include'
> :debug:configure CXX='/usr/bin/clang++'
> :debug:configure CXXFLAGS='-pipe -Os -stdlib=libc++ -arch x86_64'
> :debug:configure F77FLAGS='-m64'
> :debug:configure F90FLAGS='-pipe -Os -m64'
> :debug:configure FCFLAGS='-pipe -Os -m64'
> :debug:configure FFLAGS='-pipe -Os'
> :debug:configure INSTALL='/usr/bin/install -c'
> :debug:configure LDFLAGS='-L/opt/local/lib
> -Wl,-headerpad_max_install_names -arch x86_64'
> :debug:configure LIBRARY_PATH='/opt/local/lib'
> :debug:configure MACOSX_DEPLOYMENT_TARGET='10.13'
> :debug:configure OBJC='/usr/bin/clang'
> :debug:configure OBJCFLAGS='-pipe -Os -arch x86_64'
> :debug:configure OBJCXX='/usr/bin/clang++'
> :debug:configure OBJCXXFLAGS='-pipe -Os -stdlib=libc++ -arch x86_64'
> :info:configure Executing:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8" && ./configure --prefix=/opt/local
> --infodir=/opt/local/share/info --mandir=/opt/local/share/man --with-
> boost=/opt/local --with-boost-regex=boost_regex-mt
> :debug:configure system:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8" && ./configure --prefix=/opt/local
> --infodir=/opt/local/share/info --mandir=/opt/local/share/man --with-
> boost=/opt/local --with-boost-regex=boost_regex-mt
> :info:configure checking for a BSD-compatible install... /usr/bin/install
> -c
> :info:configure checking whether build environment is sane... yes
> :info:configure
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8/build-aux/missing: Unknown `--is-
> lightweight' option
> :info:configure Try
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8/build-aux/missing --help' for more
> information
> :info:configure configure: WARNING: 'missing' script is too old or
> missing
> :info:configure checking for a thread-safe mkdir -p... build-aux/install-
> sh -c -d
> :info:configure checking for gawk... gawk
> :info:configure checking whether make sets $(MAKE)... yes
> :info:configure checking whether make supports nested variables... yes
> :info:configure checking for gcc... /usr/bin/clang
> :info:configure checking whether the C compiler works... yes
> :info:configure checking for C compiler default output file name... a.out
> :info:configure checking for suffix of executables...
> :info:configure checking whether we are cross compiling... no
> :info:configure checking for suffix of object files... o
> :info:configure checking whether we are using the GNU C compiler... yes
> :info:configure checking whether /usr/bin/clang accepts -g... yes
> :info:configure checking for /usr/bin/clang option to accept ISO C89...
> none needed
> :info:configure checking whether /usr/bin/clang understands -c and -o
> together... yes
> :info:configure checking for style of include used by make... GNU
> :info:configure checking dependency style of /usr/bin/clang... gcc3
> :info:configure checking how to run the C preprocessor... /usr/bin/clang
> -E
> :info:configure checking for grep that handles long lines and -e...
> /usr/bin/grep
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for Minix Amsterdam compiler... no
> :info:configure checking for ar... ar
> :info:configure checking for ranlib... ranlib
> :info:configure checking build system type... x86_64-apple-darwin17.3.0
> :info:configure checking host system type... x86_64-apple-darwin17.3.0
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/stat.h... yes
> :info:configure checking for stdlib.h... yes
> :info:configure checking for string.h... yes
> :info:configure checking for memory.h... yes
> :info:configure checking for strings.h... yes
> :info:configure checking for inttypes.h... yes
> :info:configure checking for stdint.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking minix/config.h usability... no
> :info:configure checking minix/config.h presence... no
> :info:configure checking for minix/config.h... no
> :info:configure checking whether it is safe to define __EXTENSIONS__...
> yes
> :info:configure checking for size_t... yes
> :info:configure checking libintl.h usability... yes
> :info:configure checking libintl.h presence... yes
> :info:configure checking for libintl.h... yes
> :info:configure checking stddef.h usability... yes
> :info:configure checking stddef.h presence... yes
> :info:configure checking for stddef.h... yes
> :info:configure checking for strftime... yes
> :info:configure checking whether we are using the GNU C++ compiler... yes
> :info:configure checking whether /usr/bin/clang++ accepts -g... yes
> :info:configure checking dependency style of /usr/bin/clang++... gcc3
> :info:configure checking for gawk... (cached) gawk
> :info:configure checking how to print strings... printf
> :info:configure checking for a sed that does not truncate output...
> /usr/bin/sed
> :info:configure checking for fgrep... /usr/bin/grep -F
> :info:configure checking for ld used by /usr/bin/clang...
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> :info:configure checking if the linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> is GNU ld... no
> :info:configure checking for BSD- or MS-compatible name lister (nm)...
> /usr/bin/nm -B
> :info:configure checking the name lister (/usr/bin/nm -B) interface...
> BSD nm
> :info:configure checking whether ln -s works... yes
> :info:configure checking the maximum length of command line arguments...
> 196608
> :info:configure checking whether the shell understands some XSI
> constructs... yes
> :info:configure checking whether the shell understands "+="... yes
> :info:configure checking how to convert x86_64-apple-darwin17.3.0 file
> names to x86_64-apple-darwin17.3.0 format... func_convert_file_noop
> :info:configure checking how to convert x86_64-apple-darwin17.3.0 file
> names to toolchain format... func_convert_file_noop
> :info:configure checking for
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> option to reload object files... -r
> :info:configure checking for objdump... objdump
> :info:configure checking how to recognize dependent libraries... pass_all
> :info:configure checking for dlltool... no
> :info:configure checking how to associate runtime and link libraries...
> printf %s\n
> :info:configure checking for archiver @FILE support... no
> :info:configure checking for strip... strip
> :info:configure checking for ranlib... (cached) ranlib
> :info:configure checking command to parse /usr/bin/nm -B output from
> /usr/bin/clang object... ok
> :info:configure checking for sysroot... no
> :info:configure checking for mt... no
> :info:configure checking if : is a manifest tool... no
> :info:configure checking for dsymutil... dsymutil
> :info:configure checking for nmedit... nmedit
> :info:configure checking for lipo... lipo
> :info:configure checking for otool... otool
> :info:configure checking for otool64... no
> :info:configure checking for -single_module linker flag... yes
> :info:configure checking for -exported_symbols_list linker flag... yes
> :info:configure checking for -force_load linker flag... yes
> :info:configure checking for dlfcn.h... yes
> :info:configure checking for objdir... .libs
> :info:configure checking if /usr/bin/clang supports -fno-rtti -fno-
> exceptions... yes
> :info:configure checking for /usr/bin/clang option to produce PIC...
> -fno-common -DPIC
> :info:configure checking if /usr/bin/clang PIC flag -fno-common -DPIC
> works... yes
> :info:configure checking if /usr/bin/clang static flag -static works...
> no
> :info:configure checking if /usr/bin/clang supports -c -o file.o... yes
> :info:configure checking if /usr/bin/clang supports -c -o file.o...
> (cached) yes
> :info:configure checking whether the /usr/bin/clang linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin17.3.0
> dyld
> :info:configure checking how to hardcode library paths into programs...
> immediate
> :info:configure checking whether stripping libraries is possible... yes
> :info:configure checking if libtool supports shared libraries... yes
> :info:configure checking whether to build shared libraries... yes
> :info:configure checking whether to build static libraries... yes
> :info:configure checking how to run the C++ preprocessor...
> /usr/bin/clang++ -E
> :info:configure checking for ld used by /usr/bin/clang++...
> /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
> :info:configure checking if the linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> is GNU ld... no
> :info:configure checking whether the /usr/bin/clang++ linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking for /usr/bin/clang++ option to produce PIC...
> -fno-common -DPIC
> :info:configure checking if /usr/bin/clang++ PIC flag -fno-common -DPIC
> works... yes
> :info:configure checking if /usr/bin/clang++ static flag -static works...
> no
> :info:configure checking if /usr/bin/clang++ supports -c -o file.o... yes
> :info:configure checking if /usr/bin/clang++ supports -c -o file.o...
> (cached) yes
> :info:configure checking whether the /usr/bin/clang++ linker
> (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
> supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin17.3.0
> dyld
> :info:configure checking how to hardcode library paths into programs...
> immediate
> :info:configure checking whether the compiler implements namespaces...
> yes
> :info:configure checking whether the compiler supports Standard Template
> Library... yes
> :info:configure checking whether the compiler has stringstream... yes
> :info:configure checking whether the compiler has ios_base... yes
> :info:configure checking for boostlib >= 1.33.1... yes
> :info:configure checking whether the Boost::Regex library is available...
> yes
> :info:configure checking for main in -lboost_regex-mt... yes
> :info:configure checking for bison... bison -y
> :info:configure checking for flex... flex
> :info:configure checking lex output file root... configure: error: cannot
> find output from flex; giving up
> :info:configure Command failed:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8" && ./configure --prefix=/opt/local
> --infodir=/opt/local/share/info --mandir=/opt/local/share/man --with-
> boost=/opt/local --with-boost-regex=boost_regex-mt
> :info:configure Exit code: 1
> :error:configure Failed to configure source-highlight, consult
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/work/source-highlight-3.1.8/config.log
> :error:configure Failed to configure source-highlight: configure failure:
> command execution failed
> :debug:configure Error code: NONE
> :debug:configure Backtrace: configure failure: command execution failed
> :debug:configure     while executing
> :debug:configure "$procedure $targetname"
> :error:configure See
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_release_tarballs_ports_textproc_source-highlight/source-
> highlight/main.log for details.
> }}}

New description:

 Hi Guys

 '''Specifications:'''
 MacOS High Sierra - Version 10.13.2
 CPU 2.4 i5
 8BG Memory

 I download the High Sierra Macports and xcode-select version 2349
 installed and lience accepted. I ran the following command:

 to update my outdated ports;
 {{{
 sudo port upgrade outdated
 }}}
 All was looking good when I got this error:
 {{{
 Error: Failed to configure source-highlight, consult
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8/config.log
 Error: Failed to configure source-highlight: configure failure: command
 execution failed
 Error: See
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/main.log for details.
 Error: Problem while installing source-highlight
 Error: Follow https://guide.macports.org/#project.tickets to report a bug.
 --
 }}}
 I ran the python commands
 {{{
 Selecting 'python27' for 'python' succeeded. 'python27' is now active.
 KathrynusonsMBP:~ kevinferguson$ sudo port select --set python2 python27
 Selecting 'python27' for 'python2' succeeded. 'python27' is now active.
 }}}
 I then researched the above source highlights in tickets section:  It
 mentioned I should do a clean and install again.
 {{{
 sudo port clean source-highlight
 sudo port install source-highlight
 }}}
 After running the install command I received the error again below
 --
 {{{
 Error: Failed to configure source-highlight, consult
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8/config.log
 Error: Failed to configure source-highlight: configure failure: command
 execution failed
 Error: See
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/main.log for details.
 Error: Follow https://guide.macports.org/#project.tickets to report a bug.
 Error: Processing of port source-highlight failed
 }}}
 So I have logged a bug as per the error message.

 Here copy of log file can't see the attach button.
 --
 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main boost 1.65.1_1 exists in the ports tree
 :debug:main boost 1.65.1_1 +no_single+no_static+python27 is the latest
 installed
 :debug:main boost 1.65.1_1 +no_single+no_static+python27 is active
 :debug:main Merging existing variants '+no_single+no_static+python27' into
 variants
 :debug:main new fully merged portvariants: no_static + no_single +
 python27 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/boost
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Sourcing PortGroup compiler_blacklist_versions 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
 :debug:main Sourcing PortGroup active_variants 1.1 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/active_variants-1.1.tcl
 :debug:main Sourcing PortGroup compilers 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compilers-1.0.tcl
 :debug:main Sourcing PortGroup mpi 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/mpi-1.0.tcl
 :debug:main compiler clang 900.0.39.2 not blacklisted because it doesn't
 match {clang < 421}
 :debug:main Unmatched blacklisted compiler: *gcc-4.0
 :debug:main Unmatched blacklisted compiler: gcc-3.3
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant python27 provides python27
 :debug:main Executing variant no_static provides no_static
 :debug:main Executing variant no_single provides no_single
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! boost 1.65.1_1 >= boost 1.65.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.11_0 exists in the ports tree
 :debug:main zlib 1.2.11_0  is the latest installed
 :debug:main zlib 1.2.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Sourcing PortGroup xcodeversion 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! zlib 1.2.11_0 >= zlib 1.2.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.2.5_0 exists in the ports tree
 :debug:main expat 2.2.5_0  is the latest installed
 :debug:main expat 2.2.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! expat 2.2.5_0 >= expat 2.2.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.15_0 exists in the ports tree
 :debug:main libiconv 1.15_0  is the latest installed
 :debug:main libiconv 1.15_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libiconv 1.15_0 >= libiconv 1.15_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main icu 58.2_2 exists in the ports tree
 :debug:main icu 58.2_2  is the latest installed
 :debug:main icu 58.2_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! icu 58.2_2 >= icu 58.2_2
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main python27 2.7.14_0 exists in the ports tree
 :debug:main python27 2.7.14_0  is the latest installed
 :debug:main python27 2.7.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Sourcing PortGroup select 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! python27 2.7.14_0 >= python27 2.7.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db48 4.8.30_4 exists in the ports tree
 :debug:main db48 4.8.30_4  is the latest installed
 :debug:main db48 4.8.30_4  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db48
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! db48 4.8.30_4 >= db48 4.8.30_4
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main gettext 0.19.8.1_0 exists in the ports tree
 :debug:main gettext 0.19.8.1_0  is the latest installed
 :debug:main gettext 0.19.8.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Sourcing PortGroup compiler_blacklist_versions 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main compiler clang 900.0.39.2 not blacklisted because it doesn't
 match {clang < 211.10.1}
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! gettext 0.19.8.1_0 >= gettext 0.19.8.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 6.0-20171125_0 exists in the ports tree
 :debug:main ncurses 6.0-20171125_0  is the latest installed
 :debug:main ncurses 6.0-20171125_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! ncurses 6.0-20171125_0 >= ncurses
 6.0-20171125_0
 :debug:main epoch: in tree: 20090923 installed: 20090923
 :debug:main libedit 20170329-3.1_2 exists in the ports tree
 :debug:main libedit 20170329-3.1_2  is the latest installed
 :debug:main libedit 20170329-3.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libedit 20170329-3.1_2 >= libedit
 20170329-3.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libffi 3.2.1_0 exists in the ports tree
 :debug:main libffi 3.2.1_0  is the latest installed
 :debug:main libffi 3.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libffi 3.2.1_0 >= libffi 3.2.1_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.2n_0 exists in the ports tree
 :debug:main openssl 1.0.2n_0  is the latest installed
 :debug:main openssl 1.0.2n_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! openssl 1.0.2n_0 >= openssl 1.0.2n_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.21.0_0 exists in the ports tree
 :debug:main sqlite3 3.21.0_0  is the latest installed
 :debug:main sqlite3 3.21.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! sqlite3 3.21.0_0 >= sqlite3 3.21.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_7 exists in the ports tree
 :debug:main python_select 0.3_7  is the latest installed
 :debug:main python_select 0.3_7  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Sourcing PortGroup select 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! python_select 0.3_7 >= python_select 0.3_7
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python2_select 0.0_2 exists in the ports tree
 :debug:main python2_select 0.0_2  is the latest installed
 :debug:main python2_select 0.0_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python2_select
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main Sourcing PortGroup select 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! python2_select 0.0_2 >= python2_select
 0.0_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ctags 5.8_2 exists in the ports tree
 :debug:main ctags 5.8_2  is the latest installed
 :debug:main ctags 5.8_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ctags
 :debug:main OS darwin/17.3.0 (Mac OS X 10.13) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! ctags 5.8_2 >= ctags 5.8_2
 :msg:main --->  Computing dependencies for source-highlight:info:main
 .:debug:main source-highlight has no conflicts
 :debug:main Searching for dependency: boost
 :debug:main Found Dependency: receipt exists for boost
 :debug:main Searching for dependency: ctags
 :debug:main Found Dependency: receipt exists for ctags
 :debug:main Executing org.macports.main (source-highlight)
 :debug:main dropping privileges: euid changed to 505, egid changed to 502.
 :debug:archivefetch archivefetch phase started at Sat Jan 20 15:32:06 GMT
 2018
 :msg:archivefetch --->  Fetching archive for source-highlight
 :debug:archivefetch Executing org.macports.archivefetch (source-highlight)
 :debug:archivefetch euid/egid changed to: 0/0
 :debug:archivefetch chowned /opt/local/var/macports/incoming to macports
 :debug:archivefetch euid/egid changed to: 505/502
 :info:archivefetch --->  source-highlight-3.1.8_2.darwin_17.x86_64.tbz2
 doesn't seem to exist in /opt/local/var/macports/incoming/verified
 :msg:archivefetch --->  Attempting to fetch source-
 highlight-3.1.8_2.darwin_17.x86_64.tbz2 from https://packages.macports.org
 /source-highlight
 :debug:archivefetch Fetching archive failed: The requested URL returned
 error: 404 Not Found
 :msg:archivefetch --->  Attempting to fetch source-
 highlight-3.1.8_2.darwin_17.x86_64.tbz2 from
 http://mse.uk.packages.macports.org/sites/packages.macports.org/source-
 highlight
 :debug:archivefetch Fetching archive failed: The requested URL returned
 error: 404 Not Found
 :msg:archivefetch --->  Attempting to fetch source-
 highlight-3.1.8_2.darwin_17.x86_64.tbz2 from
 http://lil.fr.packages.macports.org/source-highlight
 :debug:archivefetch Fetching archive failed: The requested URL returned
 error: 404 Not Found
 :debug:archivefetch Privilege de-escalation not attempted as not running
 as root.
 :debug:fetch fetch phase started at Sat Jan 20 15:32:06 GMT 2018
 :notice:fetch --->  Fetching distfiles for source-highlight
 :debug:fetch Executing org.macports.fetch (source-highlight)
 :debug:fetch Privilege de-escalation not attempted as not running as root.
 :debug:checksum checksum phase started at Sat Jan 20 15:32:06 GMT 2018
 :notice:checksum --->  Verifying checksums for source-highlight
 :debug:checksum Executing org.macports.checksum (source-highlight)
 :info:checksum --->  Checksumming source-highlight-3.1.8.tar.gz
 :debug:checksum Calculated (rmd160) is
 a6e0ad1713deb2056984a97adc7dfd0e6610809f
 :debug:checksum Correct (rmd160) checksum for source-
 highlight-3.1.8.tar.gz
 :debug:checksum Calculated (sha256) is
 01336a7ea1d1ccc374201f7b81ffa94d0aecb33afc7d6903ebf9fbf33a55ada3
 :debug:checksum Correct (sha256) checksum for source-
 highlight-3.1.8.tar.gz
 :debug:checksum Privilege de-escalation not attempted as not running as
 root.
 :debug:extract extract phase started at Sat Jan 20 15:32:06 GMT 2018
 :notice:extract --->  Extracting source-highlight
 :debug:extract Executing org.macports.extract (source-highlight)
 :info:extract --->  Extracting source-highlight-3.1.8.tar.gz
 :debug:extract setting option extract.args to
 '/opt/local/var/macports/distfiles/source-highlight/source-
 highlight-3.1.8.tar.gz'
 :debug:extract Environment:
 :debug:extract CC_PRINT_OPTIONS='YES'
 :debug:extract
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/.CC_PRINT_OPTIONS'
 :debug:extract CPATH='/opt/local/include'
 :debug:extract LIBRARY_PATH='/opt/local/lib'
 :debug:extract MACOSX_DEPLOYMENT_TARGET='10.13'
 :info:extract Executing:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles
 /source-highlight/source-highlight-3.1.8.tar.gz' | /usr/bin/tar -xf -
 :debug:extract system:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles
 /source-highlight/source-highlight-3.1.8.tar.gz' | /usr/bin/tar -xf -
 :debug:extract euid/egid changed to: 0/0
 :debug:extract chowned
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work to macports
 :debug:extract euid/egid changed to: 505/502
 :debug:extract Privilege de-escalation not attempted as not running as
 root.
 :debug:patch patch phase started at Sat Jan 20 15:32:07 GMT 2018
 :debug:patch Executing org.macports.patch (source-highlight)
 :debug:patch Privilege de-escalation not attempted as not running as root.
 :debug:configure configure phase started at Sat Jan 20 15:32:07 GMT 2018
 :notice:configure --->  Configuring source-highlight
 :debug:configure Preferred compilers: clang macports-clang-4.0
 :debug:configure Using compiler 'Xcode Clang'
 :debug:configure Executing org.macports.configure (source-highlight)
 :debug:configure Environment:
 :debug:configure CC='/usr/bin/clang'
 :debug:configure CC_PRINT_OPTIONS='YES'
 :debug:configure
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/.CC_PRINT_OPTIONS'
 :debug:configure CFLAGS='-pipe -Os -arch x86_64'
 :debug:configure CPATH='/opt/local/include'
 :debug:configure CPPFLAGS='-I/opt/local/include'
 :debug:configure CXX='/usr/bin/clang++'
 :debug:configure CXXFLAGS='-pipe -Os -stdlib=libc++ -arch x86_64'
 :debug:configure F77FLAGS='-m64'
 :debug:configure F90FLAGS='-pipe -Os -m64'
 :debug:configure FCFLAGS='-pipe -Os -m64'
 :debug:configure FFLAGS='-pipe -Os'
 :debug:configure INSTALL='/usr/bin/install -c'
 :debug:configure LDFLAGS='-L/opt/local/lib
 -Wl,-headerpad_max_install_names -arch x86_64'
 :debug:configure LIBRARY_PATH='/opt/local/lib'
 :debug:configure MACOSX_DEPLOYMENT_TARGET='10.13'
 :debug:configure OBJC='/usr/bin/clang'
 :debug:configure OBJCFLAGS='-pipe -Os -arch x86_64'
 :debug:configure OBJCXX='/usr/bin/clang++'
 :debug:configure OBJCXXFLAGS='-pipe -Os -stdlib=libc++ -arch x86_64'
 :info:configure Executing:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8" && ./configure --prefix=/opt/local
 --infodir=/opt/local/share/info --mandir=/opt/local/share/man --with-
 boost=/opt/local --with-boost-regex=boost_regex-mt
 :debug:configure system:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8" && ./configure --prefix=/opt/local
 --infodir=/opt/local/share/info --mandir=/opt/local/share/man --with-
 boost=/opt/local --with-boost-regex=boost_regex-mt
 :info:configure checking for a BSD-compatible install... /usr/bin/install
 -c
 :info:configure checking whether build environment is sane... yes
 :info:configure
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8/build-aux/missing: Unknown `--is-
 lightweight' option
 :info:configure Try
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8/build-aux/missing --help' for more
 information
 :info:configure configure: WARNING: 'missing' script is too old or missing
 :info:configure checking for a thread-safe mkdir -p... build-aux/install-
 sh -c -d
 :info:configure checking for gawk... gawk
 :info:configure checking whether make sets $(MAKE)... yes
 :info:configure checking whether make supports nested variables... yes
 :info:configure checking for gcc... /usr/bin/clang
 :info:configure checking whether the C compiler works... yes
 :info:configure checking for C compiler default output file name... a.out
 :info:configure checking for suffix of executables...
 :info:configure checking whether we are cross compiling... no
 :info:configure checking for suffix of object files... o
 :info:configure checking whether we are using the GNU C compiler... yes
 :info:configure checking whether /usr/bin/clang accepts -g... yes
 :info:configure checking for /usr/bin/clang option to accept ISO C89...
 none needed
 :info:configure checking whether /usr/bin/clang understands -c and -o
 together... yes
 :info:configure checking for style of include used by make... GNU
 :info:configure checking dependency style of /usr/bin/clang... gcc3
 :info:configure checking how to run the C preprocessor... /usr/bin/clang
 -E
 :info:configure checking for grep that handles long lines and -e...
 /usr/bin/grep
 :info:configure checking for egrep... /usr/bin/grep -E
 :info:configure checking for Minix Amsterdam compiler... no
 :info:configure checking for ar... ar
 :info:configure checking for ranlib... ranlib
 :info:configure checking build system type... x86_64-apple-darwin17.3.0
 :info:configure checking host system type... x86_64-apple-darwin17.3.0
 :info:configure checking for ANSI C header files... yes
 :info:configure checking for sys/types.h... yes
 :info:configure checking for sys/stat.h... yes
 :info:configure checking for stdlib.h... yes
 :info:configure checking for string.h... yes
 :info:configure checking for memory.h... yes
 :info:configure checking for strings.h... yes
 :info:configure checking for inttypes.h... yes
 :info:configure checking for stdint.h... yes
 :info:configure checking for unistd.h... yes
 :info:configure checking minix/config.h usability... no
 :info:configure checking minix/config.h presence... no
 :info:configure checking for minix/config.h... no
 :info:configure checking whether it is safe to define __EXTENSIONS__...
 yes
 :info:configure checking for size_t... yes
 :info:configure checking libintl.h usability... yes
 :info:configure checking libintl.h presence... yes
 :info:configure checking for libintl.h... yes
 :info:configure checking stddef.h usability... yes
 :info:configure checking stddef.h presence... yes
 :info:configure checking for stddef.h... yes
 :info:configure checking for strftime... yes
 :info:configure checking whether we are using the GNU C++ compiler... yes
 :info:configure checking whether /usr/bin/clang++ accepts -g... yes
 :info:configure checking dependency style of /usr/bin/clang++... gcc3
 :info:configure checking for gawk... (cached) gawk
 :info:configure checking how to print strings... printf
 :info:configure checking for a sed that does not truncate output...
 /usr/bin/sed
 :info:configure checking for fgrep... /usr/bin/grep -F
 :info:configure checking for ld used by /usr/bin/clang...
 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
 :info:configure checking if the linker
 (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
 is GNU ld... no
 :info:configure checking for BSD- or MS-compatible name lister (nm)...
 /usr/bin/nm -B
 :info:configure checking the name lister (/usr/bin/nm -B) interface... BSD
 nm
 :info:configure checking whether ln -s works... yes
 :info:configure checking the maximum length of command line arguments...
 196608
 :info:configure checking whether the shell understands some XSI
 constructs... yes
 :info:configure checking whether the shell understands "+="... yes
 :info:configure checking how to convert x86_64-apple-darwin17.3.0 file
 names to x86_64-apple-darwin17.3.0 format... func_convert_file_noop
 :info:configure checking how to convert x86_64-apple-darwin17.3.0 file
 names to toolchain format... func_convert_file_noop
 :info:configure checking for
 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
 option to reload object files... -r
 :info:configure checking for objdump... objdump
 :info:configure checking how to recognize dependent libraries... pass_all
 :info:configure checking for dlltool... no
 :info:configure checking how to associate runtime and link libraries...
 printf %s\n
 :info:configure checking for archiver @FILE support... no
 :info:configure checking for strip... strip
 :info:configure checking for ranlib... (cached) ranlib
 :info:configure checking command to parse /usr/bin/nm -B output from
 /usr/bin/clang object... ok
 :info:configure checking for sysroot... no
 :info:configure checking for mt... no
 :info:configure checking if : is a manifest tool... no
 :info:configure checking for dsymutil... dsymutil
 :info:configure checking for nmedit... nmedit
 :info:configure checking for lipo... lipo
 :info:configure checking for otool... otool
 :info:configure checking for otool64... no
 :info:configure checking for -single_module linker flag... yes
 :info:configure checking for -exported_symbols_list linker flag... yes
 :info:configure checking for -force_load linker flag... yes
 :info:configure checking for dlfcn.h... yes
 :info:configure checking for objdir... .libs
 :info:configure checking if /usr/bin/clang supports -fno-rtti -fno-
 exceptions... yes
 :info:configure checking for /usr/bin/clang option to produce PIC... -fno-
 common -DPIC
 :info:configure checking if /usr/bin/clang PIC flag -fno-common -DPIC
 works... yes
 :info:configure checking if /usr/bin/clang static flag -static works... no
 :info:configure checking if /usr/bin/clang supports -c -o file.o... yes
 :info:configure checking if /usr/bin/clang supports -c -o file.o...
 (cached) yes
 :info:configure checking whether the /usr/bin/clang linker
 (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
 supports shared libraries... yes
 :info:configure checking dynamic linker characteristics... darwin17.3.0
 dyld
 :info:configure checking how to hardcode library paths into programs...
 immediate
 :info:configure checking whether stripping libraries is possible... yes
 :info:configure checking if libtool supports shared libraries... yes
 :info:configure checking whether to build shared libraries... yes
 :info:configure checking whether to build static libraries... yes
 :info:configure checking how to run the C++ preprocessor...
 /usr/bin/clang++ -E
 :info:configure checking for ld used by /usr/bin/clang++...
 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
 :info:configure checking if the linker
 (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
 is GNU ld... no
 :info:configure checking whether the /usr/bin/clang++ linker
 (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
 supports shared libraries... yes
 :info:configure checking for /usr/bin/clang++ option to produce PIC...
 -fno-common -DPIC
 :info:configure checking if /usr/bin/clang++ PIC flag -fno-common -DPIC
 works... yes
 :info:configure checking if /usr/bin/clang++ static flag -static works...
 no
 :info:configure checking if /usr/bin/clang++ supports -c -o file.o... yes
 :info:configure checking if /usr/bin/clang++ supports -c -o file.o...
 (cached) yes
 :info:configure checking whether the /usr/bin/clang++ linker
 (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld)
 supports shared libraries... yes
 :info:configure checking dynamic linker characteristics... darwin17.3.0
 dyld
 :info:configure checking how to hardcode library paths into programs...
 immediate
 :info:configure checking whether the compiler implements namespaces... yes
 :info:configure checking whether the compiler supports Standard Template
 Library... yes
 :info:configure checking whether the compiler has stringstream... yes
 :info:configure checking whether the compiler has ios_base... yes
 :info:configure checking for boostlib >= 1.33.1... yes
 :info:configure checking whether the Boost::Regex library is available...
 yes
 :info:configure checking for main in -lboost_regex-mt... yes
 :info:configure checking for bison... bison -y
 :info:configure checking for flex... flex
 :info:configure checking lex output file root... configure: error: cannot
 find output from flex; giving up
 :info:configure Command failed:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8" && ./configure --prefix=/opt/local
 --infodir=/opt/local/share/info --mandir=/opt/local/share/man --with-
 boost=/opt/local --with-boost-regex=boost_regex-mt
 :info:configure Exit code: 1
 :error:configure Failed to configure source-highlight, consult
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/work/source-highlight-3.1.8/config.log
 :error:configure Failed to configure source-highlight: configure failure:
 command execution failed
 :debug:configure Error code: NONE
 :debug:configure Backtrace: configure failure: command execution failed
 :debug:configure     while executing
 :debug:configure "$procedure $targetname"
 :error:configure See
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_tarballs_ports_textproc_source-highlight/source-
 highlight/main.log for details.
 }}}

--

Comment (by ryandesign):

 Please also attach the config.log file mentioned in the error message.

--
Ticket URL: <https://trac.macports.org/ticket/55727#comment:6>
MacPorts <https://www.macports.org/>
Ports system for macOS