[MacPorts] #61906: gcc48: error: non-local symbol required in directive

Thu Dec 24 20:22:09 UTC 2020

#61906: gcc48: error: non-local symbol required in directive
---------------------+--------------------
  Reporter:  dbl001  |      Owner:  (none)
      Type:  defect  |     Status:  new
  Priority:  Normal  |  Milestone:
 Component:  ports   |    Version:  2.6.4
Resolution:          |   Keywords:
      Port:  gcc48   |
---------------------+--------------------

Comment (by dbl001):

 Comments:
 {{{
 $ sudo port uninstall gcc48
 $ sudo port install openblas
 --->  Computing dependencies for OpenBLAS
 --->  Fetching archive for OpenBLAS
 --->  Attempting to fetch
 OpenBLAS-0.3.13_0+gcc10+lapack.darwin_15.x86_64.tbz2 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/OpenBLAS
 --->  Attempting to fetch
 OpenBLAS-0.3.13_0+gcc10+lapack.darwin_15.x86_64.tbz2.rmd160 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/OpenBLAS
 --->  Installing OpenBLAS @0.3.13_0+gcc10+lapack
 --->  Activating OpenBLAS @0.3.13_0+gcc10+lapack
 --->  Cleaning OpenBLAS
 --->  Scanning binaries for linking errors
 --->  No broken files found.
 --->  No broken ports found.
 --->  Some of the ports you installed have notes:
   OpenBLAS has the following notes:
     This version is built based on a base architecture for convenience,
     which may not be optimized for your system. To build a version
     customized for your machine, use the +native variant
 r$ port -v installed | grep gcc
   gcc5 @5.5.0_6 (active) platform='darwin 15' archs='x86_64'
 date='2020-12-24T08:53:40-0800'
   gcc9 @9.3.0_3 platform='darwin 15' archs='x86_64'
 date='2020-11-01T05:38:24-0800'
   gcc9 @9.3.0_4 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:38:21-0800'
   gcc10 @10.2.0_2 platform='darwin 15' archs='x86_64'
 date='2020-11-01T05:40:05-0800'
   gcc10 @10.2.0_3 platform='darwin 15' archs='x86_64'
 date='2020-11-17T10:26:25-0800'
   gcc10 @10.2.0_4 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:40:14-0800'
   gcc_select @0.1_8 platform='darwin 15' archs='noarch'
 date='2020-04-25T08:18:19-0700'
   gcc_select @0.1_9 (active) platform='darwin 15' archs='noarch'
 date='2020-11-01T12:42:14-0800'
   julia @1.5.2_0+gcc10 platform='darwin 15' archs='x86_64'
 date='2020-09-30T02:14:34-0700'
   julia @1.5.3_0+gcc10 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-24T10:28:21-0800'
   libgcc @3.0_0 (active) platform='darwin 15' archs='x86_64'
 date='2020-05-04T08:43:04-0700'
   libgcc6 @6.5.0_4 (active) platform='darwin 15' archs='x86_64'
 date='2020-04-25T08:18:33-0700'
   libgcc7 @7.5.0_0 (active) platform='darwin 15' archs='x86_64'
 date='2020-04-25T08:18:31-0700'
   libgcc8 @8.4.0_1 (active) platform='darwin 15' archs='x86_64'
 date='2020-09-02T09:49:32-0700'
   libgcc9 @9.3.0_2 platform='darwin 15' archs='x86_64'
 date='2020-09-02T09:44:42-0700'
   libgcc9 @9.3.0_3 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:37:34-0800'
   libgcc10 @10.2.0_1 platform='darwin 15' archs='x86_64'
 date='2020-09-01T10:33:06-0700'
   libgcc10 @10.2.0_2 platform='darwin 15' archs='x86_64'
 date='2020-11-17T10:25:39-0800'
   libgcc10 @10.2.0_3 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:37:30-0800'
   mpich-default @3.3.2_0+gcc10 (active) platform='darwin 15'
 archs='x86_64' date='2020-05-15T15:51:27-0700'
   OpenBLAS @0.3.13_0+gcc10+lapack (active) platform='darwin 15'
 archs='x86_64' date='2020-12-24T11:59:16-0800'
   openmpi-default @4.0.1_1+gcc9 (active) platform='darwin 15'
 archs='x86_64' date='2020-04-28T13:08:22-0700'
   qrupdate @1.1.2_6+accelerate+gcc10 (active) platform='darwin 15'
 archs='x86_64' date='2020-05-15T13:44:30-0700'
 (base) MacBook-Pro:~ davidlaxer$ sudo port selfupdate
 --->  Updating MacPorts base sources using rsync
 MacPorts base version 2.6.4 installed,
 MacPorts base version 2.6.4 downloaded.
 --->  Updating the ports tree
 --->  MacPorts base is already the latest version

 The ports tree has been updated. To upgrade your installed ports, you
 should run
   port upgrade outdated
 (base) MacBook-Pro:~ davidlaxer$ sudo port upgrade outdated
 --->  Computing dependencies for zstd
 --->  Fetching archive for zstd
 --->  Attempting to fetch zstd-1.4.8_0.darwin_15.x86_64.tbz2 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/zstd
 --->  Attempting to fetch zstd-1.4.8_0.darwin_15.x86_64.tbz2 from
 https://kmq.jp.packages.macports.org/zstd
 --->  Attempting to fetch zstd-1.4.8_0.darwin_15.x86_64.tbz2.rmd160 from
 https://kmq.jp.packages.macports.org/zstd
 --->  Installing zstd @1.4.8_0
 --->  Cleaning zstd
 --->  Computing dependencies for zstd
 --->  Deactivating zstd @1.4.7_0
 --->  Cleaning zstd
 --->  Activating zstd @1.4.8_0
 --->  Cleaning zstd
 --->  Computing dependencies for python38
 --->  Fetching archive for python38
 --->  Attempting to fetch
 python38-3.8.7_0+universal.darwin_15.i386-x86_64.tbz2 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/python38
 --->  Attempting to fetch
 python38-3.8.7_0+universal.darwin_15.i386-x86_64.tbz2 from
 https://kmq.jp.packages.macports.org/python38
 --->  Attempting to fetch
 python38-3.8.7_0+universal.darwin_15.i386-x86_64.tbz2 from
 https://lil.fr.packages.macports.org/python38
 --->  Fetching distfiles for python38
 --->  Attempting to fetch Python-3.8.7.tar.xz from
 https://www.python.org/ftp/python/3.8.7/
 --->  Verifying checksums for python38
 --->  Extracting python38
 --->  Applying patches to python38
 --->  Configuring python38
 --->  Building python38
 --->  Staging python38 into destroot
 --->  Installing python38 @3.8.7_0+universal
 --->  Cleaning python38
 --->  Computing dependencies for python38
 --->  Deactivating python38 @3.8.6_0+universal
 --->  Cleaning python38
 --->  Activating python38 @3.8.7_0+universal
 --->  Cleaning python38
 --->  Computing dependencies for opencv
 --->  Fetching archive for opencv
 --->  Attempting to fetch opencv-3.4.13_0.darwin_15.x86_64.tbz2 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/opencv
 --->  Attempting to fetch opencv-3.4.13_0.darwin_15.x86_64.tbz2.rmd160
 from https://ywg.ca.packages.macports.org/mirror/macports/packages/opencv
 --->  Installing opencv @3.4.13_0
 --->  Cleaning opencv
 --->  Computing dependencies for opencv
 --->  Deactivating opencv @3.4.12_0
 --->  Cleaning opencv
 --->  Activating opencv @3.4.13_0
 --->  Cleaning opencv
 --->  Computing dependencies for pcre2
 --->  Fetching archive for pcre2
 --->  Attempting to fetch pcre2-10.36_0.darwin_15.x86_64.tbz2 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/pcre2
 --->  Attempting to fetch pcre2-10.36_0.darwin_15.x86_64.tbz2.rmd160 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/pcre2
 --->  Installing pcre2 @10.36_0
 --->  Cleaning pcre2
 --->  Computing dependencies for pcre2
 --->  Deactivating pcre2 @10.35_0
 --->  Cleaning pcre2
 --->  Activating pcre2 @10.36_0
 --->  Cleaning pcre2
 --->  Fetching archive for tcl
 --->  Attempting to fetch
 tcl-8.6.10_1+corefoundation+threads.darwin_15.x86_64.tbz2 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/tcl
 --->  Attempting to fetch
 tcl-8.6.10_1+corefoundation+threads.darwin_15.x86_64.tbz2.rmd160 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/tcl
 --->  Installing tcl @8.6.10_1+corefoundation+threads
 --->  Cleaning tcl
 --->  Deactivating tcl @8.6.10_0+corefoundation+threads
 --->  Cleaning tcl
 --->  Activating tcl @8.6.10_1+corefoundation+threads
 --->  Cleaning tcl
 --->  Updating database of binaries
 --->  Scanning binaries for linking errors
 --->  No broken files found.
 --->  No broken ports found.
 --->  Some of the ports you installed have notes:
   python38 has the following notes:
     To make this the default Python or Python 3 (i.e., the version run by
 the
     'python' or 'python3' commands), run one or both of:

         sudo port select --set python python38
         sudo port select --set python3 python38
   tcl has the following notes:
     The Sqlite3 Tcl package is now being provided by the sqlite3-tcl port:
     sudo port install sqlite3-tcl
 $ port -v installed | grep gcc
   gcc5 @5.5.0_6 (active) platform='darwin 15' archs='x86_64'
 date='2020-12-24T08:53:40-0800'
   gcc9 @9.3.0_3 platform='darwin 15' archs='x86_64'
 date='2020-11-01T05:38:24-0800'
   gcc9 @9.3.0_4 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:38:21-0800'
   gcc10 @10.2.0_2 platform='darwin 15' archs='x86_64'
 date='2020-11-01T05:40:05-0800'
   gcc10 @10.2.0_3 platform='darwin 15' archs='x86_64'
 date='2020-11-17T10:26:25-0800'
   gcc10 @10.2.0_4 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:40:14-0800'
   gcc_select @0.1_8 platform='darwin 15' archs='noarch'
 date='2020-04-25T08:18:19-0700'
   gcc_select @0.1_9 (active) platform='darwin 15' archs='noarch'
 date='2020-11-01T12:42:14-0800'
   julia @1.5.2_0+gcc10 platform='darwin 15' archs='x86_64'
 date='2020-09-30T02:14:34-0700'
   julia @1.5.3_0+gcc10 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-24T10:28:21-0800'
   libgcc @3.0_0 (active) platform='darwin 15' archs='x86_64'
 date='2020-05-04T08:43:04-0700'
   libgcc6 @6.5.0_4 (active) platform='darwin 15' archs='x86_64'
 date='2020-04-25T08:18:33-0700'
   libgcc7 @7.5.0_0 (active) platform='darwin 15' archs='x86_64'
 date='2020-04-25T08:18:31-0700'
   libgcc8 @8.4.0_1 (active) platform='darwin 15' archs='x86_64'
 date='2020-09-02T09:49:32-0700'
   libgcc9 @9.3.0_2 platform='darwin 15' archs='x86_64'
 date='2020-09-02T09:44:42-0700'
   libgcc9 @9.3.0_3 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:37:34-0800'
   libgcc10 @10.2.0_1 platform='darwin 15' archs='x86_64'
 date='2020-09-01T10:33:06-0700'
   libgcc10 @10.2.0_2 platform='darwin 15' archs='x86_64'
 date='2020-11-17T10:25:39-0800'
   libgcc10 @10.2.0_3 (active) platform='darwin 15' archs='x86_64'
 date='2020-11-20T08:37:30-0800'
   mpich-default @3.3.2_0+gcc10 (active) platform='darwin 15'
 archs='x86_64' date='2020-05-15T15:51:27-0700'
   OpenBLAS @0.3.13_0+gcc10+lapack (active) platform='darwin 15'
 archs='x86_64' date='2020-12-24T11:59:16-0800'
   openmpi-default @4.0.1_1+gcc9 (active) platform='darwin 15'
 archs='x86_64' date='2020-04-28T13:08:22-0700'
   qrupdate @1.1.2_6+accelerate+gcc10 (active) platform='darwin 15'
 archs='x86_64' date='2020-05-15T13:44:30-0700'
 (base) MacBook-Pro:~ davidlaxer$ port file gcc48
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/gcc48/Portfile
 $

 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/61906#comment:14>
MacPorts <https://www.macports.org/>
Ports system for macOS