[MacPorts] #67267: gnome-dictionary configure failure (was: "Processing of port gnome failed")
MacPorts
noreply at macports.org
Thu Apr 20 08:00:43 UTC 2023
#67267: gnome-dictionary configure failure
-------------------------------+----------------------
Reporter: MarjaE2 | Owner: dbevans
Type: defect | Status: assigned
Priority: Normal | Milestone:
Component: ports | Version:
Resolution: | Keywords:
Port: gnome-dictionary |
-------------------------------+----------------------
Changes (by jmroot):
* status: new => assigned
* owner: (none) => dbevans
* port: gnome => gnome-dictionary
Old description:
> Attempted "sudo port install gnome."
>
> Gave several errors, and "command not found" when I tried to start gnome.
>
> Error: Failed to configure gnome-dictionary: consult
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_macports_release_tarballs_ports_gnome_gnome-dictionary/gnome-
> dictionary/work/build/meson-logs/meson-log.txt
> Error: Failed to configure gnome-dictionary: configure failure: command
> execution failed
> Error: See
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_macports_release_tarballs_ports_gnome_gnome-dictionary/gnome-
> dictionary/main.log for details.
> Error: Follow https://guide.macports.org/#project.tickets if you believe
> there
> is a bug.
> Error: Processing of port gnome failed
> ---> Some of the ports you installed have notes:
> db48 has the following notes:
> The Java and Tcl bindings are now provided by the db48-java and
> db48-tcl subports.
> dbus has the following notes:
> Startup items (named 'dbus-system, dbus-session') have been generated
> that
> will aid in starting dbus with launchd. They are disabled by default.
> Execute the following command to start them, and to cause them to
> launch at
> startup:
>
> sudo port load dbus
> ffmpeg has the following notes:
> This build of ffmpeg includes GPLed code and is therefore licensed
> under GPL
> v2 or later.
> The following modules are GPLed:
> postproc
> libvidstab
> libx264
> libx265
> libxvid
> To include all nonfree, GPLed and LGPL code use variant +nonfree.
> To remove nonfree and GPLed code leaving only LGPL code remove the
> +gpl2
> variant.
> geoclue2 has the following notes:
> The demo agent is now disabled by default, but can be enabled via
> +demoagent.
> gnome-chess has the following notes:
> To play against the computer, install a chess engine such as
> gnuchess.
> See https://wiki.gnome.org/Apps/Chess/ChessEngines
> gnome-devel-docs has the following notes:
> This port provides the following documents:
> - GNOME Developer Overview (yelp help:platform-overview)
> - GNOME Developer Platform Demos (yelp help:gnome-devel-demos)
> - GNOME Human Interface Guidelines (yelp help:hig)
> - GNOME Programming Guidelines (yelp help:programming-guidelines)
> - GNOME Accessibility Developers Guide (yelp
> help:accessibility-devel-guide)
> - GNOME Optimization Guide (yelp help:optimization-guide)
> gnome-user-docs has the following notes:
> This port provides the following documents:
> - GNOME Desktop System Administration Guide (yelp
> help:system-admin-guide)
> - GNOME Help (yelp help:gnome-help)
> libidn has the following notes:
> GNU libidn2 is the successor of GNU libidn. It comes with IDNA 2008
> and TR46
> implementations and also provides a compatibility layer for GNU
> libidn.
> libpsl has the following notes:
> libpsl API documentation is provided by the port 'libpsl-docs'.
> py311-pygments has the following notes:
> To make the Python 3.11 version of Pygments the one that is run when
> you
> execute the commands without a version suffix, e.g. 'pygmentize',
> run:
>
> port select --set pygments py311-pygments
> python27 has the following notes:
> To make this the default Python or Python 2 (i.e., the version run by
> the
> 'python' or 'python2' commands), run one or both of:
>
> sudo port select --set python python27
> sudo port select --set python2 python27
> python310 has the following notes:
> To make this the default Python or Python 3 (i.e., the version run by
> the
> 'python' or 'python3' commands), run one or both of:
>
> sudo port select --set python python310
> sudo port select --set python3 python310
> python311 has the following notes:
> To make this the default Python or Python 3 (i.e., the version run by
> the
> 'python' or 'python3' commands), run one or both of:
>
> sudo port select --set python python311
> sudo port select --set python3 python311
> webkit2-gtk has the following notes:
> If you are porting new software to use webkit2gtk on Apple systems,
> you will
> likely need to define BUILDING_GTK__ to get the correct behaviour
> from
> WebKitAvailability.h.
New description:
Attempted "sudo port install gnome."
Gave several errors, and "command not found" when I tried to start gnome.
{{{
Error: Failed to configure gnome-dictionary: consult
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_macports_release_tarballs_ports_gnome_gnome-dictionary/gnome-
dictionary/work/build/meson-logs/meson-log.txt
Error: Failed to configure gnome-dictionary: configure failure: command
execution failed
Error: See
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_macports_release_tarballs_ports_gnome_gnome-dictionary/gnome-
dictionary/main.log for details.
Error: Follow https://guide.macports.org/#project.tickets if you believe
there
is a bug.
Error: Processing of port gnome failed
---> Some of the ports you installed have notes:
db48 has the following notes:
The Java and Tcl bindings are now provided by the db48-java and
db48-tcl subports.
dbus has the following notes:
Startup items (named 'dbus-system, dbus-session') have been generated
that
will aid in starting dbus with launchd. They are disabled by default.
Execute the following command to start them, and to cause them to
launch at
startup:
sudo port load dbus
ffmpeg has the following notes:
This build of ffmpeg includes GPLed code and is therefore licensed
under GPL
v2 or later.
The following modules are GPLed:
postproc
libvidstab
libx264
libx265
libxvid
To include all nonfree, GPLed and LGPL code use variant +nonfree.
To remove nonfree and GPLed code leaving only LGPL code remove the
+gpl2
variant.
geoclue2 has the following notes:
The demo agent is now disabled by default, but can be enabled via
+demoagent.
gnome-chess has the following notes:
To play against the computer, install a chess engine such as gnuchess.
See https://wiki.gnome.org/Apps/Chess/ChessEngines
gnome-devel-docs has the following notes:
This port provides the following documents:
- GNOME Developer Overview (yelp help:platform-overview)
- GNOME Developer Platform Demos (yelp help:gnome-devel-demos)
- GNOME Human Interface Guidelines (yelp help:hig)
- GNOME Programming Guidelines (yelp help:programming-guidelines)
- GNOME Accessibility Developers Guide (yelp
help:accessibility-devel-guide)
- GNOME Optimization Guide (yelp help:optimization-guide)
gnome-user-docs has the following notes:
This port provides the following documents:
- GNOME Desktop System Administration Guide (yelp
help:system-admin-guide)
- GNOME Help (yelp help:gnome-help)
libidn has the following notes:
GNU libidn2 is the successor of GNU libidn. It comes with IDNA 2008
and TR46
implementations and also provides a compatibility layer for GNU
libidn.
libpsl has the following notes:
libpsl API documentation is provided by the port 'libpsl-docs'.
py311-pygments has the following notes:
To make the Python 3.11 version of Pygments the one that is run when
you
execute the commands without a version suffix, e.g. 'pygmentize', run:
port select --set pygments py311-pygments
python27 has the following notes:
To make this the default Python or Python 2 (i.e., the version run by
the
'python' or 'python2' commands), run one or both of:
sudo port select --set python python27
sudo port select --set python2 python27
python310 has the following notes:
To make this the default Python or Python 3 (i.e., the version run by
the
'python' or 'python3' commands), run one or both of:
sudo port select --set python python310
sudo port select --set python3 python310
python311 has the following notes:
To make this the default Python or Python 3 (i.e., the version run by
the
'python' or 'python3' commands), run one or both of:
sudo port select --set python python311
sudo port select --set python3 python311
webkit2-gtk has the following notes:
If you are porting new software to use webkit2gtk on Apple systems,
you will
likely need to define BUILDING_GTK__ to get the correct behaviour from
WebKitAvailability.h.
}}}
--
Comment:
Please attach the meson-log.txt and main.log mentioned in the error
message.
--
Ticket URL: <https://trac.macports.org/ticket/67267#comment:1>
MacPorts <https://www.macports.org/>
Ports system for macOS
More information about the macports-tickets
mailing list