[MacPorts] #66686: boost171 @1.71.0: Build failure (was: Openscad not loading ventura 13.1)

[MacPorts]

#66686: boost171 @1.71.0: Build failure
------------------------+-----------------------
  Reporter:  nryan9444  |      Owner:  michaelld
      Type:  defect     |     Status:  assigned
  Priority:  Normal     |  Milestone:
 Component:  ports      |    Version:
Resolution:             |   Keywords:  ventura
      Port:  boost171   |
------------------------+-----------------------
Changes (by ryandesign):

 * status:  new => assigned
 * cc: mascguy (added)
 * keywords:   => ventura
 * owner:  (none) => michaelld
 * port:  openscad => boost171


Old description:

> --->  Fetching distfiles for boost171
> --->  Attempting to fetch boost_1_71_0.tar.bz2 from
> https://distfiles.macports.org/boost171
> --->  Verifying checksums for boost171
> --->  Extracting boost171
> --->  Applying patches to boost171
> --->  Configuring boost171
> --->  Building boost171
> Error: Failed to build boost171: command execution failed
> Error: See
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_boost171/boost171/main.log
> for details.
> Error: Follow https://guide.macports.org/#project.tickets if you believe
> there
> is a bug.
> Error: Processing of port openscad failed
> --->  Some of the ports you installed have notes:
>   cmake-bootstrap has the following notes:
>     To use this bootstrap version of cmake instead of the usual cmake
> port, add
>     the following lines to the Portfile:
>
>     depends_build-replace  path:bin/cmake:cmake port:cmake-bootstrap
>     configure.cmd          ${prefix}/libexec/cmake-bootstrap/bin/cmake
>   dbus has the following notes:
>     Startup items (named 'dbus-system, dbus-session') have been generated
> that
>     will aid in starting dbus with launchd. They are disabled by default.
>     Execute the following command to start them, and to cause them to
> launch at
>     startup:
>
>         sudo port load dbus
>   libpsl has the following notes:
>     libpsl API documentation is provided by the port 'libpsl-docs'.
>   lzma has the following notes:
>     The LZMA SDK program is installed as "lzma_alone", to avoid conflict
> with
>     LZMA Utils
>   python310 has the following notes:
>     To make this the default Python or Python 3 (i.e., the version run by
> the
>     'python' or 'python3' commands), run one or both of:
>
>         sudo port select --set python python310
>         sudo port select --set python3 python310
>   qt4-mac has the following notes:
>     Users experiencing graphics glitches on newer OS versions (10.13 and
> up) can
>     experiment with different graphics drawing systems that can be set in
> the
>     Interface tab of the /Applications/MacPorts/Qt4/qtconfig.app utility.
> Raster
>     mode is the preferred mode but is not compatible with all non-
> standard
>     widget styles. Keep an eye on the Fonts setting before saving!
> (base) nolanryan at nolans-air ~ % port contents openscad
> Port openscad is not installed.
> (base) nolanryan at nolans-air ~ %

New description:

 {{{
 --->  Fetching distfiles for boost171
 --->  Attempting to fetch boost_1_71_0.tar.bz2 from
 https://distfiles.macports.org/boost171
 --->  Verifying checksums for boost171
 --->  Extracting boost171
 --->  Applying patches to boost171
 --->  Configuring boost171
 --->  Building boost171
 Error: Failed to build boost171: command execution failed
 Error: See
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_boost171/boost171/main.log
 for details.
 Error: Follow https://guide.macports.org/#project.tickets if you believe
 there is a bug.
 Error: Processing of port openscad failed
 --->  Some of the ports you installed have notes:
   cmake-bootstrap has the following notes:
     To use this bootstrap version of cmake instead of the usual cmake
 port, add
     the following lines to the Portfile:

     depends_build-replace  path:bin/cmake:cmake port:cmake-bootstrap
     configure.cmd          ${prefix}/libexec/cmake-bootstrap/bin/cmake
   dbus has the following notes:
     Startup items (named 'dbus-system, dbus-session') have been generated
 that
     will aid in starting dbus with launchd. They are disabled by default.
     Execute the following command to start them, and to cause them to
 launch at
     startup:

         sudo port load dbus
   libpsl has the following notes:
     libpsl API documentation is provided by the port 'libpsl-docs'.
   lzma has the following notes:
     The LZMA SDK program is installed as "lzma_alone", to avoid conflict
 with
     LZMA Utils
   python310 has the following notes:
     To make this the default Python or Python 3 (i.e., the version run by
 the
     'python' or 'python3' commands), run one or both of:

         sudo port select --set python python310
         sudo port select --set python3 python310
   qt4-mac has the following notes:
     Users experiencing graphics glitches on newer OS versions (10.13 and
 up) can
     experiment with different graphics drawing systems that can be set in
 the
     Interface tab of the /Applications/MacPorts/Qt4/qtconfig.app utility.
 Raster
     mode is the preferred mode but is not compatible with all non-standard
     widget styles. Keep an eye on the Fonts setting before saving!
 (base) nolanryan at nolans-air ~ % port contents openscad
 Port openscad is not installed.
 (base) nolanryan at nolans-air ~ %
 }}}

--

Comment:

 > {{{
 > Error: See
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_boost171/boost171/main.log
 for details.
 > }}}

 Please attach that main.log file.

-- 
Ticket URL: <https://trac.macports.org/ticket/66686#comment:1>
MacPorts <https://www.macports.org/>
Ports system for macOS