[MacPorts] #70476: aquaterm @1.1.1_0 package build errors (was: aquaterm package build errors)

[MacPorts]

#70476: aquaterm @1.1.1_0 package build errors
----------------------------+----------------------
  Reporter:  alycia-gailey  |      Owner:  mojca
      Type:  defect         |     Status:  assigned
  Priority:  Normal         |  Milestone:
 Component:  ports          |    Version:
Resolution:                 |   Keywords:
      Port:  aquaterm       |
----------------------------+----------------------
Changes (by jmroot):

 * status:  new => assigned
 * owner:  (none) => mojca
 * keywords:  aquaterm, macports,  build errors =>
 * port:   => aquaterm


Old description:

> The aquaterm macports package will not build without errors. I tried a
> clean build, but still get the same errors.  I made sure that I had the
> full Xcode installation, which is necessary for installing aquaterm
> package.
>
> Note that my macports installation is not in the typical location.  It is
> located in $HOME/dev2/install/ folder.  We decided to install Macports
> locally so that we would not have to use sudo or make any changes to the
> operating system when installing the Macports packages.
>
> Here is an excerpt from the log file that I have attached:
>
> :info:build warning: Traditional headermap style is no longer supported;
> please migrate to using separate headermaps and set
> 'ALWAYS_SEARCH_USER_PATHS' to NO. (in target 'AquaTerm' from project
> 'AquaTerm')
> :info:build warning: Traditional headermap style is no longer supported;
> please migrate to using separate headermaps and set
> 'ALWAYS_SEARCH_USER_PATHS' to NO. (in target 'AQTFwk' from project
> 'AquaTerm')
> :info:build ** BUILD FAILED **
> :info:build The following build commands failed:
> :info:build     ProcessInfoPlistFile
> /Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/build/Default/AquaTerm.framework/Versions/A/Resources/Info.plist
> /Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/AquaTerm
> .framework-Info.plist (in target 'AQTFwk' from project 'AquaTerm')
> :info:build (1 failure)
> :info:build Command failed: cd
> "/Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm"
> && /usr/bin/xcodebuild -UseNewBuildSystem=NO  -target "AquaTerm"
> -configuration Default build
> OBJROOT="/Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/build/"
> SYMROOT="/Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/build/"
> MACOSX_DEPLOYMENT_TARGET=13.0 ARCHS=x86_64
> SDKROOT="/Library/Developer/CommandLineTools/SDKs/MacOSX13.sdk"
> GCC_VERSION=com.apple.compilers.llvm.clang.1_0 CLANG_CXX_LIBRARY="libc++"
> LOCAL_APPS_DIR=/Users/agailey/Applications/MacPorts
> LOCAL_FRAMEWORKS_DIR=/Users/agailey/dev2/install/macports/Library/Frameworks
> :info:build Exit code: 65
> :error:build Failed to build aquaterm: command execution failed
> :debug:build Error code: NONE
> :debug:build Backtrace: command execution failed
> :debug:build     while executing
> :debug:build "$procedure $targetname"
> :error:build See
> /Users/agailey/dev2/install/macports/var/macports/logs/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/main.log
> for details.

New description:

 The aquaterm macports package will not build without errors. I tried a
 clean build, but still get the same errors.  I made sure that I had the
 full Xcode installation, which is necessary for installing aquaterm
 package.

 Note that my macports installation is not in the typical location.  It is
 located in $HOME/dev2/install/ folder.  We decided to install Macports
 locally so that we would not have to use sudo or make any changes to the
 operating system when installing the Macports packages.

 Here is an excerpt from the log file that I have attached:
 {{{
 :info:build warning: Traditional headermap style is no longer supported;
 please migrate to using separate headermaps and set
 'ALWAYS_SEARCH_USER_PATHS' to NO. (in target 'AquaTerm' from project
 'AquaTerm')
 :info:build warning: Traditional headermap style is no longer supported;
 please migrate to using separate headermaps and set
 'ALWAYS_SEARCH_USER_PATHS' to NO. (in target 'AQTFwk' from project
 'AquaTerm')
 :info:build ** BUILD FAILED **
 :info:build The following build commands failed:
 :info:build     ProcessInfoPlistFile
 /Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/build/Default/AquaTerm.framework/Versions/A/Resources/Info.plist
 /Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/AquaTerm
 .framework-Info.plist (in target 'AQTFwk' from project 'AquaTerm')
 :info:build (1 failure)
 :info:build Command failed: cd
 "/Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm"
 && /usr/bin/xcodebuild -UseNewBuildSystem=NO  -target "AquaTerm"
 -configuration Default build
 OBJROOT="/Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/build/"
 SYMROOT="/Users/agailey/dev2/install/macports/var/macports/build/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/work/AquaTerm-1.1.1/aquaterm/build/"
 MACOSX_DEPLOYMENT_TARGET=13.0 ARCHS=x86_64
 SDKROOT="/Library/Developer/CommandLineTools/SDKs/MacOSX13.sdk"
 GCC_VERSION=com.apple.compilers.llvm.clang.1_0 CLANG_CXX_LIBRARY="libc++"
 LOCAL_APPS_DIR=/Users/agailey/Applications/MacPorts
 LOCAL_FRAMEWORKS_DIR=/Users/agailey/dev2/install/macports/Library/Frameworks
 :info:build Exit code: 65
 :error:build Failed to build aquaterm: command execution failed
 :debug:build Error code: NONE
 :debug:build Backtrace: command execution failed
 :debug:build     while executing
 :debug:build "$procedure $targetname"
 :error:build See
 /Users/agailey/dev2/install/macports/var/macports/logs/_Users_agailey_dev2_install_macports_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_aqua_aquaterm/aquaterm/main.log
 for details.
 }}}

--

-- 
Ticket URL: <https://trac.macports.org/ticket/70476#comment:1>
MacPorts <https://www.macports.org/>
Ports system for macOS