GTK2 on osx
Randall Wood
rhwood at mac.com
Fri Nov 10 07:54:24 PST 2006
Go to the following page and follow the instructions there:
http://trac.macosforge.org/projects/macports/wiki/ProblemHotlist
And then try again.
CC any replies or further question to the mailing list, as I'm going
offline for the day.
On 10 Nov 2006, at 08:25, massimodisasha wrote:
> hi Randall,
> after a long compiling...
> i've a numerous errors...
> see this long log-file:
>
> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port upgrade outdated
> ---> Deactivating pkgconfig 0.20_0
> ---> Fetching pkgconfig
> ---> Attempting to fetch pkg-config-0.21.tar.gz from http://
> pkgconfig.freedesktop.org/releases/
> ---> Verifying checksum(s) for pkgconfig
> ---> Extracting pkgconfig
> ---> Configuring pkgconfig
> ---> Building pkgconfig with target all
> ---> Staging pkgconfig into destroot
> ---> Packaging tgz archive for pkgconfig 0.21_0
> ---> Installing pkgconfig 0.21_0
> ---> Activating pkgconfig 0.21_0
> ---> Cleaning pkgconfig
> ---> Deactivating libiconv 1.10_1+darwin_8
> ---> Fetching libiconv
> ---> Attempting to fetch libiconv-1.11.tar.gz from ftp://
> ftp.gnu.org/gnu/libiconv
> ---> Verifying checksum(s) for libiconv
> ---> Extracting libiconv
> ---> Configuring libiconv
> ---> Building libiconv with target all
> ---> Staging libiconv into destroot
> ---> Packaging tgz archive for libiconv 1.11_0+darwin_8
> ---> Installing libiconv 1.11_0+darwin_8
> ---> Activating libiconv 1.11_0+darwin_8
> ---> Cleaning libiconv
> ---> Deactivating gettext 0.14.5_1
> ---> Fetching gettext
> ---> Attempting to fetch gettext-0.15.tar.gz from ftp://
> ftp.gnu.org/gnu/gettext
> ---> Verifying checksum(s) for gettext
> ---> Extracting gettext
> ---> Applying patches to gettext
> ---> Configuring gettext
> ---> Building gettext with target all
> ---> Staging gettext into destroot
> ---> Packaging tgz archive for gettext 0.15_0
> ---> Installing gettext 0.15_0
> ---> Activating gettext 0.15_0
> ---> Cleaning gettext
> ---> Deactivating atk 1.11.4_0
> ---> Fetching atk
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> ftp.rpmfind.net/linux/gnome.org/sources/atk/1.12
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> archive.progeny.com/GNOME/sources/atk/1.12
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> mirror.clarkson.edu/pub/gnome/sources/atk/1.12
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> mirror.aarnet.edu.au/pub/GNOME/sources/atk/1.12
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> www.download-ftp-center.com/mirrors/gnome.org/sources/atk/1.12
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> ftp.unina.it/pub/linux/GNOMEsources/atk/1.12
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> fr.rpmfind.net/linux/gnome.org/sources/atk/1.12
> ---> Attempting to fetch atk-1.12.2.tar.bz2 from http://
> fr2.rpmfind.net/linux/gnome.org/sources/atk/1.12
> ---> Verifying checksum(s) for atk
> ---> Extracting atk
> ---> Configuring atk
> Error: Target com.apple.configure returned: configure failure:
> shell command "cd "/opt/local/var/db/dports/build/
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_
> dports_devel_atk/work/atk-1.12.2" && LDFLAGS="-L/opt/local/lib -no-
> undefined" CPPFLAGS="-I/opt/local/include -no-cpp-precomp" CFLAGS="-
> O3 -funroll-loops -fstrict-aliasing" ./configure --prefix=/opt/
> local --disable-gtk-doc" returned error 1
> Command output: checking for aclocal flags...
> checking for pkg-config... /opt/local/bin/pkg-config
> checking for GLIB - version >= 2.5.7... no
> *** Could not run GLIB test program, checking why...
> *** The test program compiled, but did not run. This usually means
> *** that the run-time linker is not finding GLIB or finding the wrong
> *** version of GLIB. If it is not finding GLIB, you'll need to set
> your
> *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf
> to point
> *** to the installed location Also, make sure you have run
> ldconfig if that
> *** is required on your system
> ***
> *** If you have an old version installed, it is best to remove it,
> although
> *** you may also be able to get things to work by modifying
> LD_LIBRARY_PATH
> checking for pkg-config... (cached) /opt/local/bin/pkg-config
> checking for GLIB - version >= 2.0.0... no
> *** Could not run GLIB test program, checking why...
> *** The test program compiled, but did not run. This usually means
> *** that the run-time linker is not finding GLIB or finding the wrong
> *** version of GLIB. If it is not finding GLIB, you'll need to set
> your
> *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf
> to point
> *** to the installed location Also, make sure you have run
> ldconfig if that
> *** is required on your system
> ***
> *** If you have an old version installed, it is best to remove it,
> although
> *** you may also be able to get things to work by modifying
> LD_LIBRARY_PATH
> configure: error:
> *** GLIB 2.0.0 or better is required. The latest version of
> *** GLIB is always available from ftp://ftp.gtk.org/. If GLIB is
> installed
> *** but not in the same location as pkg-config add the location of
> the file
> *** glib-2.0.pc to the environment variable PKG_CONFIG_PATH.
>
> ---> Deactivating fontconfig 2.3.2_0
> ---> Fetching fontconfig
> ---> Verifying checksum(s) for fontconfig
> ---> Extracting fontconfig
> ---> Configuring fontconfig
> ---> Building fontconfig with target all
> ---> Staging fontconfig into destroot
> ---> Packaging tgz archive for fontconfig 2.3.2_2+macosx
> ---> Installing fontconfig 2.3.2_2+macosx
> ---> Activating fontconfig 2.3.2_2+macosx
> ---> Cleaning fontconfig
> ---> Deactivating libpng 1.2.8_2+darwin_8
> ---> Fetching libpng
> ---> Attempting to fetch libpng-1.2.10.tar.bz2 from http://
> easynews.dl.sourceforge.net/libpng
> ---> Verifying checksum(s) for libpng
> ---> Extracting libpng
> ---> Configuring libpng
> ---> Building libpng with target all
> ---> Staging libpng into destroot
> ---> Packaging tgz archive for libpng 1.2.10_2+darwin_8
> ---> Installing libpng 1.2.10_2+darwin_8
> ---> Activating libpng 1.2.10_2+darwin_8
> ---> Cleaning libpng
> ---> Deactivating cairo 1.0.4_0
> ---> Fetching cairo
> ---> Attempting to fetch cairo-1.2.6.tar.gz from http://
> cairographics.org/releases/
> ---> Verifying checksum(s) for cairo
> ---> Extracting cairo
> ---> Configuring cairo
> ---> Building cairo with target all
> ---> Staging cairo into destroot
> ---> Packaging tgz archive for cairo 1.2.6_0
> ---> Installing cairo 1.2.6_0
> ---> Activating cairo 1.2.6_0
> ---> Cleaning cairo
> ---> Activating gtk2 2.8.19_0+darwin_8
> Error: Activating gtk2 2.8.19_0 failed: Image error: Another
> version of gtk2 (2.8.17_0+darwin_8) is already active.
> ---> Deactivating libtool 1.5.20_0
> ---> Fetching libtool
> ---> Attempting to fetch libtool-1.5.22.tar.gz from ftp://
> ftp.gnu.org/gnu/libtool
> ---> Verifying checksum(s) for libtool
> ---> Extracting libtool
> ---> Configuring libtool
> ---> Building libtool with target all
> ---> Staging libtool into destroot
> ---> Packaging tgz archive for libtool 1.5.22_0
> ---> Installing libtool 1.5.22_0
> ---> Activating libtool 1.5.22_0
> ---> Cleaning libtool
> ---> Deactivating pango 1.12.1_0
> ---> Fetching pango
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> ftp.rpmfind.net/linux/gnome.org/sources/pango/1.14
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> archive.progeny.com/GNOME/sources/pango/1.14
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> mirror.clarkson.edu/pub/gnome/sources/pango/1.14
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> mirror.aarnet.edu.au/pub/GNOME/sources/pango/1.14
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> www.download-ftp-center.com/mirrors/gnome.org/sources/pango/1.14
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> ftp.unina.it/pub/linux/GNOMEsources/pango/1.14
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> fr.rpmfind.net/linux/gnome.org/sources/pango/1.14
> ---> Attempting to fetch pango-1.14.3.tar.bz2 from http://
> fr2.rpmfind.net/linux/gnome.org/sources/pango/1.14
> ---> Verifying checksum(s) for pango
> ---> Extracting pango
> ---> Applying patches to pango
> ---> Configuring pango
> ---> Building pango with target all
> Error: Target com.apple.build returned: shell command "cd "/opt/
> local/var/db/dports/build/
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_
> dports_x11_pango/work/pango-1.14.3" && make all" returned error 2
> Command output: /usr/bin/ld: warning -prebind has no effect with -
> bundle
> /usr/bin/ld: warning can't open dynamic library: /opt/local/lib/
> libintl.3.dylib referenced from: /opt/local/lib/
> libgobject-2.0.dylib (checking for undefined symbols may be
> affected) (No such file or directory, errno = 2)
> nmedit -s .libs/pango-thai-fc-symbols.expsym .libs/pango-thai-fc.so
> creating pango-thai-fc.la
> (cd .libs && rm -f pango-thai-fc.la && ln -s ../pango-thai-fc.la
> pango-thai-fc.la)
> Making all in tibetan
> if /bin/sh ../../libtool --tag=CC --mode=compile gcc -
> DHAVE_CONFIG_H -I. -I. -I../.. -DG_LOG_DOMAIN=\"Pango\" -
> DPANGO_ENABLE_ENGINE -DG_DISABLE_CAST_CHECKS -I../.. -I../../pango -
> D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/
> include -I/opt/local/include -I/opt/local/include -I/opt/local/
> include/freetype2 -I/opt/local/include -no-cpp-precomp -g -O2 -
> Wall -MT tibetan-fc.lo -MD -MP -MF ".deps/tibetan-fc.Tpo" -c -o
> tibetan-fc.lo tibetan-fc.c; \
> then mv -f ".deps/tibetan-fc.Tpo" ".deps/tibetan-fc.Plo"; else rm -
> f ".deps/tibetan-fc.Tpo"; exit 1; fi
> mkdir .libs
> gcc -DHAVE_CONFIG_H -I. -I. -I../.. -DG_LOG_DOMAIN=\"Pango\" -
> DPANGO_ENABLE_ENGINE -DG_DISABLE_CAST_CHECKS -I../.. -I../../pango -
> D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/
> include -I/opt/local/include -I/opt/local/include -I/opt/local/
> include/freetype2 -I/opt/local/include -no-cpp-precomp -g -O2 -Wall
> -MT tibetan-fc.lo -MD -MP -MF .deps/tibetan-fc.Tpo -c tibetan-fc.c
> -fno-common -DPIC -o .libs/tibetan-fc.o
> /bin/sh ../../libtool --tag=CC --mode=link gcc -g -O2 -Wall -no-
> undefined -bind_at_load -o pango-tibetan-fc.la -rpath /opt/local/
> lib/pango/1.5.0/modules -module -export-dynamic -avoid-version -
> export-symbols-regex "^script_engine_.*" tibetan-fc.lo -L/opt/local/
> lib -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl -liconv ../../
> pango/libpango-1.0.la ../../pango/libpangoft2-1.0.la -L/opt/local/
> lib -lfontconfig -L/opt/local/lib -lfreetype -lz
> generating symbol list for `pango-tibetan-fc.la'
> /usr/bin/nm -p .libs/tibetan-fc.o | sed -n -e 's/^.*[ ]\
> ([BCDEGRST][BCDEGRST]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\)
> $/\1 _\2 \2/p' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/pango-
> tibetan-fc.exp
> grep -E -e "^script_engine_.*" ".libs/pango-tibetan-fc.exp" >
> ".libs/pango-tibetan-fc.expT"
> mv -f ".libs/pango-tibetan-fc.expT" ".libs/pango-tibetan-fc.exp"
> sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < .libs/pango-
> tibetan-fc.exp > .libs/pango-tibetan-fc-symbols.expsym
> gcc -o .libs/pango-tibetan-fc.so -bundle .libs/tibetan-fc.o -L/
> opt/local/lib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/
> libgmodule-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/
> lib/libintl.dylib /opt/local/lib/libiconv.dylib ../../pango/.libs/
> libpango-1.0.dylib ../../pango/.libs/libpangoft2-1.0.dylib /opt/
> local/var/db/dports/build/
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_
> dports_x11_pango/work/pango-1.14.3/pango/.libs/libpango-1.0.dylib /
> opt/local/lib/libexpat.dylib /opt/local/lib/libz.dylib /opt/local/
> lib/libfontconfig.dylib /opt/local/lib/libfreetype.dylib -lz
> /usr/bin/ld: warning -prebind has no effect with -bundle
> /usr/bin/ld: warning can't open dynamic library: /opt/local/lib/
> libintl.3.dylib referenced from: /opt/local/lib/
> libgobject-2.0.dylib (checking for undefined symbols may be
> affected) (No such file or directory, errno = 2)
> nmedit -s .libs/pango-tibetan-fc-symbols.expsym .libs/pango-tibetan-
> fc.so
> creating pango-tibetan-fc.la
> (cd .libs && rm -f pango-tibetan-fc.la && ln -s ../pango-tibetan-
> fc.la pango-tibetan-fc.la)
> Writing a pango.modules file to use with tests/examples.
> dyld: Library not loaded: /opt/local/lib/libintl.3.dylib
> Referenced from: /opt/local/lib/libgobject-2.0.0.dylib
> Reason: image not found
> make[3]: *** [pango.modules] Error 133
> make[2]: *** [all-recursive] Error 1
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> ---> Deactivating py-gobject 2.10.1_0
> ---> Fetching py-gobject
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> ftp.rpmfind.net/linux/gnome.org/sources/pygobject/2.12/
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> archive.progeny.com/GNOME/sources/pygobject/2.12/
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> mirror.clarkson.edu/pub/gnome/sources/pygobject/2.12/
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> mirror.aarnet.edu.au/pub/GNOME/sources/pygobject/2.12/
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> www.download-ftp-center.com/mirrors/gnome.org/sources/pygobject/2.12/
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> ftp.unina.it/pub/linux/GNOMEsources/pygobject/2.12/
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> fr.rpmfind.net/linux/gnome.org/sources/pygobject/2.12/
> ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http://
> fr2.rpmfind.net/linux/gnome.org/sources/pygobject/2.12/
> ---> Verifying checksum(s) for py-gobject
> ---> Extracting py-gobject
> ---> Configuring py-gobject
> Error: Target com.apple.configure returned: configure failure:
> shell command "cd "/opt/local/var/db/dports/build/
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_
> dports_python_py-gobject/work/pygobject-2.12.1" && ./configure --
> prefix=/opt/local" returned error 1
> Command output: checking dynamic linker characteristics...
> darwin8.8.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> checking for a Python interpreter with version >= 2.3.5... python
> checking for python... /opt/local/bin/python
> checking for python version... 2.4
> checking for python platform... darwin
> checking for python script directory... ${prefix}/lib/python2.4/
> site-packages
> checking for python extension module directory... ${exec_prefix}/
> lib/python2.4/site-packages
> checking for headers required to compile python extensions... found
> checking for xsltproc... /usr/bin/xsltproc
> checking for python module thread... yes
> checking whether to enable threading in pygobject... yes
> checking for pkg-config... /opt/local/bin/pkg-config
> checking for GLIB - version >= 2.8.0... no
> *** Could not run GLIB test program, checking why...
> *** The test program compiled, but did not run. This usually means
> *** that the run-time linker is not finding GLIB or finding the wrong
> *** version of GLIB. If it is not finding GLIB, you'll need to set
> your
> *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf
> to point
> *** to the installed location Also, make sure you have run
> ldconfig if that
> *** is required on your system
> ***
> *** If you have an old version installed, it is best to remove it,
> although
> *** you may also be able to get things to work by modifying
> LD_LIBRARY_PATH
> configure: error: maybe you want the pygobject-2-4 branch?
>
> ---> Activating gtk2 2.8.19_0+darwin_8
> Error: Activating gtk2 2.8.19_0 failed: Image error: Another
> version of gtk2 (2.8.17_0+darwin_8) is already active.
> ---> Fetching libglade2
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> ftp.rpmfind.net/linux/gnome.org/sources/libglade/2.6/
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> archive.progeny.com/GNOME/sources/libglade/2.6/
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> mirror.clarkson.edu/pub/gnome/sources/libglade/2.6/
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> mirror.aarnet.edu.au/pub/GNOME/sources/libglade/2.6/
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> www.download-ftp-center.com/mirrors/gnome.org/sources/libglade/2.6/
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> ftp.unina.it/pub/linux/GNOMEsources/libglade/2.6/
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> fr.rpmfind.net/linux/gnome.org/sources/libglade/2.6/
> ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http://
> fr2.rpmfind.net/linux/gnome.org/sources/libglade/2.6/
> ---> Verifying checksum(s) for libglade2
> ---> Extracting libglade2
> ---> Configuring libglade2
> Error: Target com.apple.configure returned: configure failure:
> shell command "cd "/opt/local/var/db/dports/build/
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_
> dports_gnome_libglade2/work/libglade-2.6.0" && CPPFLAGS="-L/opt/
> local/lib -I/opt/local/include" ./configure --prefix=/opt/local --
> mandir=/opt/local/share/man" returned error 1
> Command output: checking dynamic linker characteristics...
> darwin8.8.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> configure: creating libtool
> checking for pkg-config... /opt/local/bin/pkg-config
> checking for GTK+ - version >= 2.5.0... no
> *** Could not run GTK+ test program, checking why...
> *** The test program failed to compile or link. See the file
> config.log for the
> *** exact error that occured. This usually means GTK+ is
> incorrectly installed.
> checking for gtk_plug_get_type... no
> checking for pkg-config... (cached) /opt/local/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for LIBGLADE... configure: error: Package requirements
> ( libxml-2.0 >= 2.4.10 atk >= 1.9.0 gtk+-2.0 >= 2.5.0
> glib-2.0 >= 2.5.0) were not met:
>
> No package 'atk' found
> Package pango was not found in the pkg-config search path.
> Perhaps you should add the directory containing `pango.pc'
> to the PKG_CONFIG_PATH environment variable
> Package 'pango', required by 'GDK', not found
>
> Consider adjusting the PKG_CONFIG_PATH environment variable if you
> installed software in a non-standard prefix.
>
> Alternatively, you may set the environment variables LIBGLADE_CFLAGS
> and LIBGLADE_LIBS to avoid the need to call pkg-config.
> See the pkg-config man page for more details.
>
>
> ---> Fetching py-cairo
> ---> Attempting to fetch pycairo-1.2.2.tar.gz from http://
> cairographics.org/releases/
> ---> Verifying checksum(s) for py-cairo
> ---> Extracting py-cairo
> ---> Configuring py-cairo
> ---> Building py-cairo with target all
> ---> Staging py-cairo into destroot
> ---> Packaging tgz archive for py-cairo 1.2.2_0
> ---> Installing py-cairo 1.2.2_0
> ---> Activating py-cairo 1.2.2_0
> ---> Cleaning py-cairo
> ---> Activating py-gobject 2.10.1_0
> ---> Deactivating py-gobject 2.10.1_0
> ---> Configuring py-gobject
> Error: Target com.apple.configure returned: configure failure:
> shell command "cd "/opt/local/var/db/dports/build/
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_
> dports_python_py-gobject/work/pygobject-2.12.1" && ./configure --
> prefix=/opt/local" returned error 1
> Command output: checking dynamic linker characteristics...
> darwin8.8.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> checking for a Python interpreter with version >= 2.3.5... python
> checking for python... /opt/local/bin/python
> checking for python version... 2.4
> checking for python platform... darwin
> checking for python script directory... ${prefix}/lib/python2.4/
> site-packages
> checking for python extension module directory... ${exec_prefix}/
> lib/python2.4/site-packages
> checking for headers required to compile python extensions... found
> checking for xsltproc... /usr/bin/xsltproc
> checking for python module thread... yes
> checking whether to enable threading in pygobject... yes
> checking for pkg-config... /opt/local/bin/pkg-config
> checking for GLIB - version >= 2.8.0... no
> *** Could not run GLIB test program, checking why...
> *** The test program compiled, but did not run. This usually means
> *** that the run-time linker is not finding GLIB or finding the wrong
> *** version of GLIB. If it is not finding GLIB, you'll need to set
> your
> *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf
> to point
> *** to the installed location Also, make sure you have run
> ldconfig if that
> *** is required on your system
> ***
> *** If you have an old version installed, it is best to remove it,
> although
> *** you may also be able to get things to work by modifying
> LD_LIBRARY_PATH
> configure: error: maybe you want the pygobject-2-4 branch?
>
> ---> Deactivating py-gtk2 2.8.6_0
> ---> Configuring libglade2
> Error: Target com.apple.configure returned: configure failure:
> shell command "cd "/opt/local/var/db/dports/build/
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_
> dports_gnome_libglade2/work/libglade-2.6.0" && CPPFLAGS="-L/opt/
> local/lib -I/opt/local/include" ./configure --prefix=/opt/local --
> mandir=/opt/local/share/man" returned error 1
> Command output: checking dynamic linker characteristics...
> darwin8.8.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> configure: creating libtool
> checking for pkg-config... /opt/local/bin/pkg-config
> checking for GTK+ - version >= 2.5.0... no
> *** Could not run GTK+ test program, checking why...
> *** The test program failed to compile or link. See the file
> config.log for the
> *** exact error that occured. This usually means GTK+ is
> incorrectly installed.
> checking for gtk_plug_get_type... no
> checking for pkg-config... (cached) /opt/local/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for LIBGLADE... configure: error: Package requirements
> ( libxml-2.0 >= 2.4.10 atk >= 1.9.0 gtk+-2.0 >= 2.5.0
> glib-2.0 >= 2.5.0) were not met:
>
> No package 'atk' found
> Package pango was not found in the pkg-config search path.
> Perhaps you should add the directory containing `pango.pc'
> to the PKG_CONFIG_PATH environment variable
> Package 'pango', required by 'GDK', not found
>
> Consider adjusting the PKG_CONFIG_PATH environment variable if you
> installed software in a non-standard prefix.
>
> Alternatively, you may set the environment variables LIBGLADE_CFLAGS
> and LIBGLADE_LIBS to avoid the need to call pkg-config.
> See the pkg-config man page for more details.
>
>
> Error: The following dependencies failed to build: libglade2
> ---> Deactivating tiff 3.8.0_0+darwin_8
> ---> Fetching tiff
> ---> Attempting to fetch tiff-3.8.2.tar.gz from ftp://
> ftp.remotesensing.org/pub/libtiff/
> ---> Verifying checksum(s) for tiff
> ---> Extracting tiff
> ---> Configuring tiff
> ---> Building tiff with target all
> ---> Staging tiff into destroot
> ---> Packaging tgz archive for tiff 3.8.2_0+darwin_8
> ---> Installing tiff 3.8.2_0+darwin_8
> ---> Activating tiff 3.8.2_0+darwin_8
> ---> Cleaning tiff
> owerbook-g4-12-di-epifanio:~ epifanio$
>
>
> then i tryed to run GGOBI, but now it fails!
>
> powerbook-g4-12-di-epifanio:~ epifanio$ ggobi
> dyld: Library not loaded: /opt/local/lib/libatk-1.0.0.dylib
> Referenced from: /usr/local/bin/ggobi
> Reason: image not found
> Trace/BPT trap
> powerbook-g4-12-di-epifanio:~ epifanio$
>
>
>
> Il giorno 10/nov/06, alle ore 13:12, Randall Wood ha scritto:
>
>> At this point, we should step back and try:
>>
>> sudo port sync; sudo port upgrade outdated
>>
>> and then try cleaning and installing gtk2 again. It seems that you
>> have a number of older ports on your system that need to be
>> updated before installing gtk2.
>>
>> If you begin getting strange "libintl not found" type messages,
>> see http://trac.macosforge.org/projects/macports/wiki/ProblemHotlist
>>
>> On 10 Nov 2006, at 07:07, massimodisasha wrote:
>>
>>> thanks for your help!!!
>>>
>>> now i've:
>>>
>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port clean --all gtk2
>>> Password:
>>> ---> Cleaning gtk2
>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install gtk2
>>> ---> Fetching gtk2
>>> ---> Attempting to fetch gtk+-2.10.6.tar.bz2 from ftp://
>>> ftp.gtk.org/pub/gtk/v2.10
>>> ---> Verifying checksum(s) for gtk2
>>> ---> Extracting gtk2
>>> ---> Configuring gtk2
>>> Error: Target com.apple.configure returned: configure failure:
>>> shell command "cd "/opt/local/var/db/dports/build/
>>> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdat
>>> e_dports_x11_gtk2/work/gtk+-2.10.6" && LDFLAGS="-L/opt/local/lib -
>>> lpango-1.0" CPPFLAGS="-I/opt/local/include -no-cpp-precomp -
>>> DX_LOCALE" CFLAGS="-O3 -funroll-loops -fstrict-aliasing" ./
>>> configure --prefix=/opt/local --disable-shm --disable-gtk-doc --
>>> with-included-loaders --mandir=/opt/local/share/man" returned
>>> error 1
>>> Command output: checking if g++ static flag -static works... no
>>> checking if g++ supports -c -o file.o... yes
>>> checking whether the g++ linker (/usr/bin/ld) supports shared
>>> libraries... yes
>>> checking dynamic linker characteristics... darwin8.8.0 dyld
>>> checking how to hardcode library paths into programs... immediate
>>> appending configuration tag "F77" to libtool
>>> checking for special C compiler options needed for large files... no
>>> checking for _FILE_OFFSET_BITS value needed for large files... no
>>> checking for _LARGE_FILES value needed for large files... no
>>> checking for nm... /usr/bin/nm -p
>>> checking whether to enable maintainer-specific portions of
>>> Makefiles... no
>>> checking for some Win32 platform... no
>>> checking whether build environment is sane... yes
>>> checking for strerror in -lcposix... no
>>> checking for gcc option to accept ANSI C... none needed
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether make sets $(MAKE)... (cached) yes
>>> checking for pkg-config... /opt/local/bin/pkg-config
>>> checking pkg-config is at least version 0.9.0... yes
>>> checking for BASE_DEPENDENCIES... configure: error: Package
>>> requirements (glib-2.0 >= 2.12.0 atk >= 1.9.0 pango >=
>>> 1.12.0 cairo >= 1.2.0) were not met:
>>>
>>> Requested 'cairo >= 1.2.0' but version of cairo is 1.0.4
>>>
>>> Consider adjusting the PKG_CONFIG_PATH environment variable if you
>>> installed software in a non-standard prefix.
>>>
>>> Alternatively, you may set the environment variables
>>> BASE_DEPENDENCIES_CFLAGS
>>> and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config.
>>> See the pkg-config man page for more details.
>>>
>>>
>>> Error: Status 1 encountered during processing.
>>> powerbook-g4-12-di-epifanio:~ epifanio$
>>>
>>> Il giorno 10/nov/06, alle ore 12:49, Randall Wood ha scritto:
>>>
>>>> At this point, it seems we are suffering from the prior failure
>>>> to build gtk2, so try:
>>>>
>>>> sudo port clean --all gtk2; sudo port install gtk2
>>>>
>>>> On 10 Nov 2006, at 06:52, massimodisasha wrote:
>>>>
>>>>> i've tryed:
>>>>>
>>>>> Last login: Fri Nov 10 08:36:08 on ttyp2
>>>>> Welcome to Darwin!
>>>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port deactivate glib2
>>>>> ---> Deactivating glib2
>>>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install
>>>>> glib2---> Activating glib2 2.12.4_0---> Cleaning
>>>>> glib2powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install
>>>>> gtk2
>>>>> ---> Configuring gtk2
>>>>> Error: Target com.apple.configure returned: configure failure:
>>>>> shell command "cd "/opt/local/var/db/dports/build/
>>>>> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupd
>>>>> ate_dports_x11_gtk2/work/gtk+-2.10.6" && LDFLAGS="-L/opt/local/
>>>>> lib -lpango-1.0" CPPFLAGS="-I/opt/local/include -no-cpp-precomp
>>>>> -DX_LOCALE" CFLAGS="-O3 -funroll-loops -fstrict-aliasing" ./
>>>>> configure --prefix=/opt/local --disable-shm --disable-gtk-doc --
>>>>> with-included-loaders --mandir=/opt/local/share/man" returned
>>>>> error 1
>>>>> Command output: sh: line 1: cd: /opt/local/var/db/dports/build/
>>>>> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupd
>>>>> ate_dports_x11_gtk2/work/gtk+-2.10.6: No such file or directory
>>>>>
>>>>> Error: Status 1 encountered during processing.
>>>>> powerbook-g4-12-di-epifanio:~ epifanio$
>>>>>
>>>>>
>>>>>
>>>>> Il giorno 10/nov/06, alle ore 12:44, Randall Wood ha scritto:
>>>>>
>>>>>> Try then "sudo port deactivate glib2; sudo port install glib2"
>>>>>>
>>>>>> On 10 Nov 2006, at 06:47, massimodisasha wrote:
>>>>>>
>>>>>>> i've tryed, but i've this:
>>>>>>>
>>>>>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port upgrade glib2
>>>>>>> Password:
>>>>>>> ---> Activating glib2 2.12.4_0
>>>>>>> Error: Activating glib2 2.12.4_0 failed: Image error: Another
>>>>>>> version of glib2 (2.10.2_0) is already active.
>>>>>>> powerbook-g4-12-di-epifanio:~ epifanio$
>>>>>>>
>>>>>>> Il giorno 10/nov/06, alle ore 12:36, Randall Wood ha scritto:
>>>>>>>
>>>>>>>> Try "sudo port upgrade glib2" and then try installing gtk2.
>>>>>>>>
>>>>>>>> On 10 Nov 2006, at 06:14, massimodisasha wrote:
>>>>>>>>
>>>>>>>>> hi,
>>>>>>>>> i'm trying to install GTK2 with "darwinports"
>>>>>>>>> but i've some problems:
>>>>>>>>> when i try to do:
>>>>>>>>> sudo port install gtk2
>>>>>>>>> i've this error:
>>>>>>>>>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install
>>>>>>>>>>> gtk2
>>>>>>>>>>> Password:
>>>>>>>>>>> Portfile changed since last build; discarding previous
>>>>>>>>>>> state.
>>>>>>>>>>> ---> Fetching gtk2
>>>>>>>>>>> ---> Attempting to fetch gtk+-2.10.3.tar.bz2 from ftp://
>>>>>>>>>>> ftp.gtk.org/
>>>>>>>>>>> pub/gtk/v2.10
>>>>>>>>>>> ---> Verifying checksum(s) for gtk2
>>>>>>>>>>> ---> Extracting gtk2
>>>>>>>>>>> ---> Configuring gtk2
>>>>>>>>>>> Error: Target com.apple.configure returned: configure
>>>>>>>>>>> failure: shell
>>>>>>>>>>> command "cd "/opt/local/var/db/dports/build/
>>>>>>>>>>> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org
>>>>>>>>>>> _dpupdate_dp
>>>>>>>>>>> orts_x11_gtk2/work/gtk+-2.10.3" && LDFLAGS="-L/opt/local/
>>>>>>>>>>> lib -
>>>>>>>>>>> lpango-1.0" CPPFLAGS="-I/opt/local/include -no-cpp-precomp -
>>>>>>>>>>> DX_LOCALE" CFLAGS="-O3 -funroll-loops -fstrict-
>>>>>>>>>>> aliasing" ./configure
>>>>>>>>>>> --prefix=/opt/local --disable-shm --disable-gtk-doc --
>>>>>>>>>>> with-included-
>>>>>>>>>>> loaders --mandir=/opt/local/share/man" returned error 1
>>>>>>>>>>> Command output: checking if the linker (/usr/bin/ld) is
>>>>>>>>>>> GNU ld... no
>>>>>>>>>>> checking whether the g++ linker (/usr/bin/ld) supports
>>>>>>>>>>> shared
>>>>>>>>>>> libraries... yes
>>>>>>>>>>> checking for g++ option to produce PIC... -fno-common
>>>>>>>>>>> checking if g++ PIC flag -fno-common works... yes
>>>>>>>>>>> checking if g++ supports -c -o file.o... yes
>>>>>>>>>>> checking whether the g++ linker (/usr/bin/ld) supports
>>>>>>>>>>> shared
>>>>>>>>>>> libraries... yes
>>>>>>>>>>> checking dynamic linker characteristics... darwin8.8.0 dyld
>>>>>>>>>>> checking how to hardcode library paths into programs...
>>>>>>>>>>> immediate
>>>>>>>>>>> checking whether stripping libraries is possible... yes
>>>>>>>>>>> appending configuration tag "F77" to libtool
>>>>>>>>>>> checking for special C compiler options needed for large
>>>>>>>>>>> files... no
>>>>>>>>>>> checking for _FILE_OFFSET_BITS value needed for large
>>>>>>>>>>> files... no
>>>>>>>>>>> checking for _LARGE_FILES value needed for large files... no
>>>>>>>>>>> checking for nm... /usr/bin/nm -p
>>>>>>>>>>> checking whether to enable maintainer-specific portions of
>>>>>>>>>>> Makefiles... no
>>>>>>>>>>> checking for some Win32 platform... no
>>>>>>>>>>> checking whether build environment is sane... yes
>>>>>>>>>>> checking for strerror in -lcposix... no
>>>>>>>>>>> checking for gcc option to accept ANSI C... none needed
>>>>>>>>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>>>>>>>>> checking whether make sets $(MAKE)... (cached) yes
>>>>>>>>>>> checking for pkg-config... /opt/local/bin/pkg-config
>>>>>>>>>>> checking pkg-config is at least version 0.9.0... yes
>>>>>>>>>>> checking for BASE_DEPENDENCIES... configure: error: Package
>>>>>>>>>>> requirements (glib-2.0 >= 2.12.0 atk >= 1.9.0 pango >=
>>>>>>>>>>> 1.12.0 cairo >= 1.2.0) were not met.
>>>>>>>>>>> Consider adjusting the PKG_CONFIG_PATH environment
>>>>>>>>>>> variable if you
>>>>>>>>>>> installed software in a non-standard prefix.
>>>>>>>>>>>
>>>>>>>>>>> Alternatively you may set the BASE_DEPENDENCIES_CFLAGS and
>>>>>>>>>>> BASE_DEPENDENCIES_LIBS environment variables
>>>>>>>>>>> to avoid the need to call pkg-config. See the pkg-config
>>>>>>>>>>> man page for
>>>>>>>>>>> more details.
>>>>>>>>>>>
>>>>>>>>>>> Error: Status 1 encountered during processing.
>>>>>>>>>>> powerbook-g4-12-di-epifanio:~ epifanio$
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> i've tryed to update "glib"
>>>>>>>>> but:
>>>>>>>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install
>>>>>>>>> glib2
>>>>>>>>> Portfile changed since last build; discarding previous state.
>>>>>>>>> ---> Fetching glib2
>>>>>>>>> ---> Attempting to fetch glib-2.12.4.tar.bz2 from ftp://
>>>>>>>>> ftp.gtk.org/pub/gtk/v2.12
>>>>>>>>> ...........
>>>>>>>>> ---> Verifying checksum(s) for glib2
>>>>>>>>> ---> Extracting glib2
>>>>>>>>> ---> Applying patches to glib2
>>>>>>>>> ---> Configuring glib2
>>>>>>>>> ---> Building glib2 with target all
>>>>>>>>> ---> Staging glib2 into destroot
>>>>>>>>> ---> Packaging tgz archive for glib2 2.12.4_0
>>>>>>>>> ---> Installing glib2 2.12.4_0
>>>>>>>>> ---> Activating glib2 2.12.4_0
>>>>>>>>> Error: Target com.apple.activate returned: Image error:
>>>>>>>>> Another version of glib2 (2.10.2_0) is already active.
>>>>>>>>> Error: Status 1 encountered during processing.
>>>>>>>>>
>>>>>>>>> how can i do???
>>>>>>>>>
>>>>>>>>> i must update to GTK2
>>>>>>>>> beacouse it is a dependence for an R-Cran package (RGTK2,
>>>>>>>>> Rggobi)
>>>>>>>>>
>>>>>>>>> can you help me?
>>>>>>>>> very thanks!
>>>>>>>>> Massimo
>>>>>>>>> _______________________________________________
>>>>>>>>> macports-users mailing list
>>>>>>>>> macports-users at lists.macosforge.org
>>>>>>>>> http://lists.macosforge.org/mailman/listinfo/macports-users
>>>>>>>>
>>>>>>>>
>>>>>>>> Randall Wood
>>>>>>>> rhwood at mac.com
>>>>>>>>
>>>>>>>> "The rules are simple: The ball is round. The game lasts 90
>>>>>>>> minutes. All the
>>>>>>>> rest is just philosophy."
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> Randall Wood
>>>>>> rhwood at mac.com
>>>>>>
>>>>>> "The rules are simple: The ball is round. The game lasts 90
>>>>>> minutes. All the
>>>>>> rest is just philosophy."
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>> Randall Wood
>>>> rhwood at mac.com
>>>>
>>>> "The rules are simple: The ball is round. The game lasts 90
>>>> minutes. All the
>>>> rest is just philosophy."
>>>>
>>>>
>>>
>>
>>
>> Randall Wood
>> rhwood at mac.com
>>
>> "The rules are simple: The ball is round. The game lasts 90
>> minutes. All the
>> rest is just philosophy."
>>
>>
>
Randall Wood
rhwood at mac.com
"The rules are simple: The ball is round. The game lasts 90 minutes.
All the
rest is just philosophy."
More information about the macports-users
mailing list