Self update

[Dan Finkle]

I have installed Xcode tools and tried using all versions of GCC available.
I¹m on an Xserve G5.

Here is the full output if anyone can help..

Dan
Synchronizing from rsync://rsync.darwinports.org/dpupdate/dports
receiving file list ... done
./
aqua/istumbler/
devel/dbus/
devel/gazpacho/
devel/glibmm/
devel/gnome-bindings-csharp/
devel/gnome-bindings-cxx/
devel/gnome-bindings-perl5/
devel/gnome-bindings-python/
devel/gnome-bindings-suite/
devel/iso-codes/
devel/kiwi/
devel/orbit2/
editors/abiword/
editors/abiword-x11/
games/freeciv/
gnome/colorscheme/
gnome/control-center/
gnome/drivel/
gnome/gconfmm/
gnome/gedit/
gnome/gnome-desktop-suite/
gnome/gnome-platform-suite/
gnome/gnome-vfs/
gnome/libglademm/
gnome/libgnomecups/
gnome/libgnomeprint/
gnome/libgnomeprintui/
gnome/nautilus/
gnome/seahorse/
gnustep/Addresses/
gnustep/etoile/
graphics/
graphics/agave/
graphics/cairomm/
irc/irssi/
irc/irssi/files/
perl/p5-glib/
perl/p5-gnome2/
perl/p5-gnome2-canvas/
perl/p5-gnome2-gconf/
perl/p5-gnome2-vfs/
perl/p5-gtk2/
perl/p5-gtk2-gladexml/
textproc/figlet/
textproc/figlet/files/
textproc/intltool/
textproc/scrollkeeper/
www/firefox-x11/
x11/gtkmm/
x11/gtkspell2/
x11/pango/
PortIndex
aqua/istumbler/Portfile
devel/dbus/Portfile
devel/gazpacho/Portfile
devel/glibmm/Portfile
devel/gnome-bindings-csharp/Portfile
devel/gnome-bindings-cxx/Portfile
devel/gnome-bindings-perl5/Portfile
devel/gnome-bindings-python/Portfile
devel/gnome-bindings-suite/Portfile
devel/iso-codes/Portfile
devel/kiwi/Portfile
devel/orbit2/Portfile
editors/abiword-x11/Portfile
editors/abiword/Portfile
games/freeciv/Portfile
gnome/colorscheme/Portfile
gnome/control-center/Portfile
gnome/drivel/Portfile
gnome/gconfmm/Portfile
gnome/gedit/Portfile
gnome/gnome-desktop-suite/Portfile
gnome/gnome-platform-suite/Portfile
gnome/gnome-vfs/Portfile
gnome/libglademm/Portfile
gnome/libgnomecups/Portfile
gnome/libgnomeprint/Portfile
gnome/libgnomeprintui/Portfile
gnome/nautilus/Portfile
gnome/seahorse/Portfile
gnustep/Addresses/Portfile
gnustep/etoile/Portfile
graphics/agave/Portfile
graphics/cairomm/Portfile
irc/irssi/Portfile
irc/irssi/files/patch-src-irc-dcc-dcc.c
perl/p5-glib/Portfile
perl/p5-gnome2-canvas/Portfile
perl/p5-gnome2-gconf/Portfile
perl/p5-gnome2-vfs/Portfile
perl/p5-gnome2/Portfile
perl/p5-gtk2-gladexml/Portfile
perl/p5-gtk2/Portfile
textproc/figlet/Portfile
textproc/figlet/files/patch-Makefile
textproc/intltool/Portfile
textproc/scrollkeeper/Portfile
www/firefox-x11/Portfile
x11/gtkmm/Portfile
x11/gtkspell2/Portfile
x11/pango/Portfile

wrote 10043 bytes  read 248163 bytes  24591.05 bytes/sec
total size is 13428779  speedup is 52.01
DarwinPorts base version 1.310 installed
receiving file list ... done
./
deleting config.log

wrote 101 bytes  read 4524 bytes  3083.33 bytes/sec
total size is 2504037  speedup is 541.41
Downloaded DarwinPorts base version 1.320
Configuring, Building and Installing new DarwinPorts base
checking build system type... powerpc-apple-darwin7.9.0
checking host system type... powerpc-apple-darwin7.9.0
checking target system type... powerpc-apple-darwin7.9.0
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C
compiler cannot create executables
See `config.log' for more details.
Error: /opt/local/bin/port: selfupdate failed: Error installing new
DarwinPorts base: shell command "cd
/opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate1/base
&& ./configure --prefix=/opt/local --with-install-user=root
--with-install-group=admin --with-tclpackage=/Library/Tcl && make && make
install" returned error 77
Command output: checking build system type... powerpc-apple-darwin7.9.0
checking host system type... powerpc-apple-darwin7.9.0
checking target system type... powerpc-apple-darwin7.9.0
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C
compiler cannot create executables
See `config.log' for more details.

epixfiles:~ sysadmin$

On 9/25/06 9:18 AM, "Rolf Würdemann" <rowue at digitalis.org> wrote:

> 
> Am 25.09.2006 um 14:51 schrieb Dan Finkle:
> 
>>  I have reinstalled twice.
>>  
>>  Where can I find the config.log file referenced?
> 
> Have you installed the XCode- Tools? Which gcc you where
> using (gcc_select) - on which OS /Architecture (gcc 3.3 (XCode)
> does not work on intel mac's for examle)
> 
> (would use "find" to find config.log;)
> 
> Reg's
> 
>     Rolf 
> 
>> 
>>  
>>  
>>  
>>  On 9/24/06 10:53 PM, "Paul Beard" <paulbeard at gmail.com> wrote:
>>  
>>  
>>> 
>>>  On Sep 24, 2006, at 6:25 AM, Dan Finkle wrote:
>>>  
>>>  
>>>>  Error I get when running su port ­v selfupdate:
>>>>  
>>>>   This is what I see when using the command.
>>>>   
>>>>   Thanks so much for your help, if you think it¹s something I should send
>>>> out to the mailing list please let me know.
>>>>   
>>>>   Cheers, 
>>>>   
>>>>   Dan
>>>>   
>>>>   Last login: Thu Sep 21 13:23:37 on console
>>>>   Welcome to Darwin!
>>>>   epixfiles:~ sysadmin$ sudo port -v selfupdate
>>>>   Password:
>>>>   Synchronizing from rsync://rsync.darwinports.org/dpupdate/dports
>>>>   receiving file list ... done
>>>>   
>>>>   wrote 101 bytes  read 211859 bytes  28261.33 bytes/sec
>>>>   total size is 13401931  speedup is 63.23
>>>>   DarwinPorts base version 1.310 installed
>>>>   receiving file list ... done
>>>>   ./
>>>>   deleting config.log
>>>>   
>>>>   wrote 101 bytes  read 4524 bytes  3083.33 bytes/sec
>>>>   total size is 2504037  speedup is 541.41
>>>>   Downloaded DarwinPorts base version 1.320
>>>>   Configuring, Building and Installing new DarwinPorts base
>>>>   checking build system type... powerpc-apple-darwin7.9.0
>>>>   checking host system type... powerpc-apple-darwin7.9.0
>>>>   checking target system type... powerpc-apple-darwin7.9.0
>>>>   checking for gcc... gcc
>>>>   checking for C compiler default output file name... configure: error: C
>>>> compiler cannot create executables
>>>>   See `config.log' for more details.
>>>>   Error: /opt/local/bin/port: selfupdate failed: Error installing new
>>>> DarwinPorts base: shell command "cd
>>>> /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate1/base
>>>> && ./configure --prefix=/opt/local --with-install-user=root
>>>> --with-install-group=admin --with-tclpackage=/Library/Tcl && make && make
>>>> install" returned error 77
>>>>   Command output: checking build system type... powerpc-apple-darwin7.9.0
>>>>   checking host system type... powerpc-apple-darwin7.9.0
>>>>   checking target system type... powerpc-apple-darwin7.9.0
>>>>   checking for gcc... gcc
>>>>   checking for C compiler default output file name... configure: error: C
>>>> compiler cannot create executables
>>>>   See `config.log' for more details.
>>>>   
>>>>   
>>>>  
>>> 
>>>  I would be inclined to reinstall the whole ports system. if you don't have
>>> any ports installed, you could just wipe out /opt and start over. 
>>>  
>>>   
>>>  --
>>>  Paul Beard
>>>  contact info: www.paulbeard.org/paulbeard.vcf
>>> <http://www.paulbeard.org/paulbeard.vcf>
>>> <http://www.paulbeard.org/paulbeard.vcf>
>>>  pictures: http://www.flickr.com/photos/pdb206/
>>>  Are you trying to win an argument or solve a problem? 
>>>  
>>>   
>>>  
>>>  
>>>  
>>> 
>>> _______________________________________________
>>>  macports-users mailing list
>>>  macports-users at lists.macosforge.org
>>>  http://lists.macosforge.org/mailman/listinfo/macports-users
>>>  
>> 
>>  
>> _______________________________________________
>> macports-users mailing list
>> macports-users at lists.macosforge.org
>> http://lists.macosforge.org/mailman/listinfo/macports-users
>>  
> 
>  
> --
>                Security is an illusion - Datasecurity twice
>   Rolf Würdemann  - private: rowue at digitalis.org - office: rowue at crew-gmbh.de
>   GnuPG fingerprint: 7383 348F 67D1 CD27 C90F DDD0 86A3 31B6 67F0 D02F
> 
>  
> 
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.macosforge.org/pipermail/macports-users/attachments/20060925/19f70324/attachment.html