sudo port install apache2

Ryan Schmidt ryandesign at macports.org
Fri Dec 14 17:58:44 PST 2007


Good, so something in /usr/local was conflicting.

I see now all the other libs that you do have in /usr/local/lib.  
Those will probably also conflict with MacPorts-installed programs.  
This is why we recommend not having anything in /usr/local/lib.  
Instead, install all software you need using MacPorts.

On Dec 14, 2007, at 19:53, Charlse Darwin wrote:

> $ mv mv /usr/local mv /usr/local-off
> Password:
> $ sudo port install apache2
> --->  Building db44 with target all
> --->  Staging db44 into destroot
> --->  Installing db44 4.4.20_1+darwin_8
> --->  Activating db44 4.4.20_1+darwin_8
> --->  Cleaning db44
> --->  Fetching gawk
> --->  Attempting to fetch gawk-3.1.5.tar.bz2 from http:// 
> ftp.gnu.org/gnu/gawk
> --->  Verifying checksum(s) for gawk
> --->  Extracting gawk
> --->  Applying patches to gawk
> --->  Configuring gawk
>>
> On Dec 14, 2007, at 8:43 PM, Ryan Schmidt wrote:
>
>> Um.... it was anticipated to have been in /usr/local/lib but I  
>> don't see it there either.
>>
>> Try moving the entire /usr/local aside (e.g. rename it "/usr/local- 
>> off") and see if that helps.
>>
>>
>> On Dec 14, 2007, at 19:14, Charlse Darwin wrote:
>>
>>> Where is readline?
>>>
>>> $ ls /usr/local/*
>>> /usr/local/BerkeleyDB.4.2:
>>> bin     docs    include lib
>>>
>>> /usr/local/OpenSourceLicenses:
>>> MySQL.txt               RemoteDesktop.txt
>>>
>>> /usr/local/OpenSourceVersions:
>>> MySQL.plist             RemoteDesktop.plist
>>>
>>> /usr/local/apache:
>>> bin     include libexec sbin    share
>>>
>>> /usr/local/apr:
>>> bin     build-1 include lib
>>>
>>> /usr/local/bin:
>>> bash                    darwinxref               
>>> make                    python2.5-config         
>>> smtpd.py                svndumpfilter
>>> bashbug                 decomment                
>>> nano                    pythonw                  
>>> smtpd2.5.py             svnlook
>>> check_dylib             idle                     
>>> pydoc                   pythonw2.5               
>>> srm                     svnserve
>>> checksyms               idle2.5                  
>>> pydoc2.5                relpath                  
>>> sudo                    svnsync
>>> ctfconvert.c            indr                     
>>> python                  rnano                    
>>> sudoedit                svnversion
>>> darwinbuild             kern_tool               python- 
>>> config           seg_addr_table          svn                      
>>> wget
>>> darwinmaster            kextsymboltool           
>>> python2.5               seg_hack                 
>>> svnadmin                whois
>>>
>>> /usr/local/etc:
>>> wgetrc
>>>
>>> /usr/local/include:
>>> DarwinBuild     apr-1           db.h            dyld             
>>> fuse.h          neon            pcap-namedb.h   streams          
>>> ulockmgr.h
>>> IOKit           cbt             db_cxx.h        fuse             
>>> mach-o          pcap-bpf.h      pcap.h          subversion-1
>>>
>>> /usr/local/info:
>>> bash.info       make.info       make.info-1     make.info-2
>>>
>>> /usr/local/lib:
>>> charset.alias                   libkld.a                         
>>> libsvn_fs-1.0.dylib             libsvn_ra_svn-1.0.dylib          
>>> libsvn_wc-1.0.dylib
>>> libapr-1.0.2.8.dylib            libneon.25.0.5.dylib             
>>> libsvn_fs-1.dylib               libsvn_ra_svn-1.dylib            
>>> libsvn_wc-1.dylib
>>> libapr-1.0.dylib                libneon.25.dylib                 
>>> libsvn_fs_base-1.0.0.0.dylib    libsvn_repos-1.0.0.0.dylib       
>>> libsvnjavahl-1.0.0.0.dylib
>>> libapr-1.dylib                  libneon.dylib                    
>>> libsvn_fs_base-1.0.dylib        libsvn_repos-1.0.dylib           
>>> libsvnjavahl-1.0.dylib
>>> libaprutil-1.0.2.8.dylib        libpcap.a                        
>>> libsvn_fs_base-1.dylib          libsvn_repos-1.dylib             
>>> libsvnjavahl-1.dylib
>>> libaprutil-1.0.dylib            libstreams.a                     
>>> libsvn_fs_fs-1.0.0.0.dylib      libsvn_subr-1.0.0.0.dylib        
>>> libulockmgr.0.0.0.dylib
>>> libaprutil-1.dylib              libstreams_debug.a               
>>> libsvn_fs_fs-1.0.dylib          libsvn_subr-1.0.dylib            
>>> libulockmgr.0.dylib
>>> libdb-4.5.dylib                 libstreams_profile.a             
>>> libsvn_fs_fs-1.dylib            libsvn_subr-1.dylib              
>>> libulockmgr.a
>>> libdb-4.dylib                   libsvn_client-1.0.0.0.dylib      
>>> libsvn_ra-1.0.0.0.dylib         libsvn_swig_perl-1.0.0.0.dylib   
>>> libulockmgr.dylib
>>> libdb.dylib                     libsvn_client-1.0.dylib          
>>> libsvn_ra-1.0.dylib             libsvn_swig_perl-1.0.dylib       
>>> libulockmgr.la
>>> libexpat.0.1.0.dylib            libsvn_client-1.dylib            
>>> libsvn_ra-1.dylib               libsvn_swig_perl-1.dylib         
>>> pkgconfig
>>> libexpat.0.dylib                libsvn_delta-1.0.0.0.dylib       
>>> libsvn_ra_dav-1.0.0.0.dylib     libsvn_swig_py-1.0.0.0.dylib     
>>> svn-apache
>>> libexpat.dylib                  libsvn_delta-1.0.dylib           
>>> libsvn_ra_dav-1.0.dylib         libsvn_swig_py-1.0.dylib         
>>> svn-javahl
>>> libfuse.0.0.0.dylib             libsvn_delta-1.dylib             
>>> libsvn_ra_dav-1.dylib           libsvn_swig_py-1.dylib           
>>> svn-perl
>>> libfuse.0.dylib                 libsvn_diff-1.0.0.0.dylib        
>>> libsvn_ra_local-1.0.0.0.dylib   libsvn_swig_ruby-1.0.0.0.dylib   
>>> svn-python
>>> libfuse.a                       libsvn_diff-1.0.dylib            
>>> libsvn_ra_local-1.0.dylib       libsvn_swig_ruby-1.0.dylib       
>>> svn-ruby
>>> libfuse.dylib                   libsvn_diff-1.dylib              
>>> libsvn_ra_local-1.dylib         libsvn_swig_ruby-1.dylib
>>> libfuse.la                      libsvn_fs-1.0.0.0.dylib          
>>> libsvn_ra_svn-1.0.0.0.dylib     libsvn_wc-1.0.0.0.dylib
>>>
>>> /usr/local/libexec:
>>> gcc                     sudo_noexec.dylib       sudo_noexec.la
>>>
>>> /usr/local/man:
>>> man1    man3    whatis
>>>
>>> /usr/local/sbin:
>>> visudo
>>>
>>> /usr/local/share:
>>> darwinbuild     darwinxref      doc             html             
>>> info            locale          man
>>> $
>>>
>>>
>>> On Dec 14, 2007, at 8:04 PM, Ryan Schmidt wrote:
>>>
>>>> No no -- you need to remove (or temporarily move aside) the  
>>>> readline libraries in /usr/local, *not* the readline installed  
>>>> by MacPorts into /opt/local, which is perfectly fine to have.
>>>>
>>>> On Dec 14, 2007, at 16:54, Charles Darwin wrote:
>>>>
>>>>> $ sudo port uninstall readline
>>>>> --->  Unable to uninstall readline 5.2.007_0, the following  
>>>>> ports depend on it:
>>>>> --->    bash
>>>>> --->    gnupg
>>>>> Error: port uninstall failed: Please uninstall the ports that  
>>>>> depend on readline first.
>>>>> $ sudo port -f uninstall readline
>>>>> --->  Unable to uninstall readline 5.2.007_0, the following  
>>>>> ports depend on it:
>>>>> --->    bash
>>>>> --->    gnupg
>>>>> Warning: Uninstall forced.  Proceeding despite dependencies.
>>>>> --->  Deactivating readline 5.2.007_0
>>>>> --->  Uninstalling readline 5.2.007_0
>>>>> $ sudo port install apache2
>>>>> --->  Building db44 with target all
>>>>> Error: Target org.macports.build returned: shell command " cd "/ 
>>>>> opt/local/var/macports/build/ 
>>>>> _opt_local_var_macports_sources_rsync.macports.org_release_ports_d 
>>>>> atabases_db44/work/db-4.4.20/build_unix" && make all " returned  
>>>>> error 2
>>>>> Command output: /bin/sh ./libtool --mode=compile /usr/bin/ 
>>>>> gcc-4.0 -c -O2  -I../dist/.. -I/opt/local/include ../dist/../ 
>>>>> db_dump185/db_dump185.c
>>>>>  /usr/bin/gcc-4.0 -c -O2 -I../dist/.. -I/opt/local/include ../ 
>>>>> dist/../db_dump185/db_dump185.c  -fno-common -DPIC -o .libs/ 
>>>>> db_dump185.o
>>>>> ../dist/../db_dump185/db_dump185.c: In function 'main':
>>>>> ../dist/../db_dump185/db_dump185.c:212: warning: assignment  
>>>>> makes pointer from integer without a cast
>>>>> ../dist/../db_dump185/db_dump185.c:214: warning: assignment  
>>>>> makes pointer from integer without a cast
>>>>> ../dist/../db_dump185/db_dump185.c:229: error: 'struct __db'  
>>>>> has no member named 'seq'
>>>>> ../dist/../db_dump185/db_dump185.c:229: error: 'R_NEXT'  
>>>>> undeclared (first use in this function)
>>>>> ../dist/../db_dump185/db_dump185.c:229: error: (Each undeclared  
>>>>> identifier is reported only once
>>>>> ../dist/../db_dump185/db_dump185.c:229: error: for each  
>>>>> function it appears in.)
>>>>> ../dist/../db_dump185/db_dump185.c:234: error: 'struct __db'  
>>>>> has no member named 'seq'
>>>>> ../dist/../db_dump185/db_dump185.c: In function 'db_hash':
>>>>> ../dist/../db_dump185/db_dump185.c:262: error: 'struct __db'  
>>>>> has no member named 'internal'
>>>>> ../dist/../db_dump185/db_dump185.c:264: error: 'struct __db'  
>>>>> has no member named 'internal'
>>>>> ../dist/../db_dump185/db_dump185.c: In function 'db_btree':
>>>>> ../dist/../db_dump185/db_dump185.c:289: error: 'struct __db'  
>>>>> has no member named 'internal'
>>>>> make: *** [db_dump185.lo] Error 1
>>>>>
>>>>> Error: The following dependencies failed to build: apr-util  
>>>>> db44 sqlite3 gawk readline
>>>>> Error: Status 1 encountered during processing.
>>>>> $
>>>>>
>>>>> On Dec 14, 2007, at 2:16 PM, Daniel J. Luke wrote:
>>>>>
>>>>>> On Dec 14, 2007, at 12:40 PM, Chris Janton wrote:
>>>>>>> On 2007-12-13 , at 21:08 , Daniel J. Luke wrote:
>>>>>>>>> Error: The following dependencies failed to build: apr-util  
>>>>>>>>> db44 sqlite3 gawk openssl
>>>>>>>>> Error: Status 1 encountered during processing.
>>>>>>>>
>>>>>>>> This is probably related to:
>>>>>>>>
>>>>>>>> http://trac.macports.org/projects/macports/ticket/12040
>>>>>>>
>>>>>>>
>>>>>>> I have the dreaded "readline in /usr/local" problem.
>>>>>>> The resolution to the problem says re-install MacPorts from  
>>>>>>> the disk image and selfupdate to the latest version.
>>>>>>
>>>>>> That's the resolution if you are having problems building  
>>>>>> MacPorts, not if db44 is having problems.
>>>>>>
>>>>>> I would recommend removing your readline from /usr/local  
>>>>>> (perhaps just temporarily) so that db44 can be installed.
>>>>>>
>>>>>>> What happens to the long list of ports that I have active  
>>>>>>> when I re-install from the disk image?
>>>>>>>
>>>>>>> mac:/opt system$ sudo du -d 1 -h .
>>>>>>> 689M    ./local
>>>>>>> 689M    .
>>>>>>
>>>>>> Nothing should happen to them if you were to reinstall  
>>>>>> MacPorts (unless you remove /opt/local or files from within / 
>>>>>> opt/local), but it doesn't look like you need to reinstall  
>>>>>> MacPorts.
>



More information about the macports-users mailing list