sudo port install apache2

Ryan Schmidt ryandesign at macports.org
Fri Dec 14 17:43:19 PST 2007


Um.... it was anticipated to have been in /usr/local/lib but I don't  
see it there either.

Try moving the entire /usr/local aside (e.g. rename it "/usr/local- 
off") and see if that helps.


On Dec 14, 2007, at 19:14, Charlse Darwin wrote:

> Where is readline?
>
> $ ls /usr/local/*
> /usr/local/BerkeleyDB.4.2:
> bin     docs    include lib
>
> /usr/local/OpenSourceLicenses:
> MySQL.txt               RemoteDesktop.txt
>
> /usr/local/OpenSourceVersions:
> MySQL.plist             RemoteDesktop.plist
>
> /usr/local/apache:
> bin     include libexec sbin    share
>
> /usr/local/apr:
> bin     build-1 include lib
>
> /usr/local/bin:
> bash                    darwinxref               
> make                    python2.5-config         
> smtpd.py                svndumpfilter
> bashbug                 decomment                
> nano                    pythonw                  
> smtpd2.5.py             svnlook
> check_dylib             idle                     
> pydoc                   pythonw2.5               
> srm                     svnserve
> checksyms               idle2.5                  
> pydoc2.5                relpath                  
> sudo                    svnsync
> ctfconvert.c            indr                     
> python                  rnano                    
> sudoedit                svnversion
> darwinbuild             kern_tool               python- 
> config           seg_addr_table          svn                     wget
> darwinmaster            kextsymboltool           
> python2.5               seg_hack                 
> svnadmin                whois
>
> /usr/local/etc:
> wgetrc
>
> /usr/local/include:
> DarwinBuild     apr-1           db.h            dyld             
> fuse.h          neon            pcap-namedb.h   streams          
> ulockmgr.h
> IOKit           cbt             db_cxx.h        fuse             
> mach-o          pcap-bpf.h      pcap.h          subversion-1
>
> /usr/local/info:
> bash.info       make.info       make.info-1     make.info-2
>
> /usr/local/lib:
> charset.alias                   libkld.a                         
> libsvn_fs-1.0.dylib             libsvn_ra_svn-1.0.dylib          
> libsvn_wc-1.0.dylib
> libapr-1.0.2.8.dylib            libneon.25.0.5.dylib             
> libsvn_fs-1.dylib               libsvn_ra_svn-1.dylib            
> libsvn_wc-1.dylib
> libapr-1.0.dylib                libneon.25.dylib                 
> libsvn_fs_base-1.0.0.0.dylib    libsvn_repos-1.0.0.0.dylib       
> libsvnjavahl-1.0.0.0.dylib
> libapr-1.dylib                  libneon.dylib                    
> libsvn_fs_base-1.0.dylib        libsvn_repos-1.0.dylib           
> libsvnjavahl-1.0.dylib
> libaprutil-1.0.2.8.dylib        libpcap.a                        
> libsvn_fs_base-1.dylib          libsvn_repos-1.dylib             
> libsvnjavahl-1.dylib
> libaprutil-1.0.dylib            libstreams.a                     
> libsvn_fs_fs-1.0.0.0.dylib      libsvn_subr-1.0.0.0.dylib        
> libulockmgr.0.0.0.dylib
> libaprutil-1.dylib              libstreams_debug.a               
> libsvn_fs_fs-1.0.dylib          libsvn_subr-1.0.dylib            
> libulockmgr.0.dylib
> libdb-4.5.dylib                 libstreams_profile.a             
> libsvn_fs_fs-1.dylib            libsvn_subr-1.dylib              
> libulockmgr.a
> libdb-4.dylib                   libsvn_client-1.0.0.0.dylib      
> libsvn_ra-1.0.0.0.dylib         libsvn_swig_perl-1.0.0.0.dylib   
> libulockmgr.dylib
> libdb.dylib                     libsvn_client-1.0.dylib          
> libsvn_ra-1.0.dylib             libsvn_swig_perl-1.0.dylib       
> libulockmgr.la
> libexpat.0.1.0.dylib            libsvn_client-1.dylib            
> libsvn_ra-1.dylib               libsvn_swig_perl-1.dylib         
> pkgconfig
> libexpat.0.dylib                libsvn_delta-1.0.0.0.dylib       
> libsvn_ra_dav-1.0.0.0.dylib     libsvn_swig_py-1.0.0.0.dylib    svn- 
> apache
> libexpat.dylib                  libsvn_delta-1.0.dylib           
> libsvn_ra_dav-1.0.dylib         libsvn_swig_py-1.0.dylib        svn- 
> javahl
> libfuse.0.0.0.dylib             libsvn_delta-1.dylib             
> libsvn_ra_dav-1.dylib           libsvn_swig_py-1.dylib          svn- 
> perl
> libfuse.0.dylib                 libsvn_diff-1.0.0.0.dylib        
> libsvn_ra_local-1.0.0.0.dylib   libsvn_swig_ruby-1.0.0.0.dylib  svn- 
> python
> libfuse.a                       libsvn_diff-1.0.dylib            
> libsvn_ra_local-1.0.dylib       libsvn_swig_ruby-1.0.dylib      svn- 
> ruby
> libfuse.dylib                   libsvn_diff-1.dylib              
> libsvn_ra_local-1.dylib         libsvn_swig_ruby-1.dylib
> libfuse.la                      libsvn_fs-1.0.0.0.dylib          
> libsvn_ra_svn-1.0.0.0.dylib     libsvn_wc-1.0.0.0.dylib
>
> /usr/local/libexec:
> gcc                     sudo_noexec.dylib       sudo_noexec.la
>
> /usr/local/man:
> man1    man3    whatis
>
> /usr/local/sbin:
> visudo
>
> /usr/local/share:
> darwinbuild     darwinxref      doc             html             
> info            locale          man
> $
>
>
> On Dec 14, 2007, at 8:04 PM, Ryan Schmidt wrote:
>
>> No no -- you need to remove (or temporarily move aside) the  
>> readline libraries in /usr/local, *not* the readline installed by  
>> MacPorts into /opt/local, which is perfectly fine to have.
>>
>> On Dec 14, 2007, at 16:54, Charles Darwin wrote:
>>
>>> $ sudo port uninstall readline
>>> --->  Unable to uninstall readline 5.2.007_0, the following ports  
>>> depend on it:
>>> --->    bash
>>> --->    gnupg
>>> Error: port uninstall failed: Please uninstall the ports that  
>>> depend on readline first.
>>> $ sudo port -f uninstall readline
>>> --->  Unable to uninstall readline 5.2.007_0, the following ports  
>>> depend on it:
>>> --->    bash
>>> --->    gnupg
>>> Warning: Uninstall forced.  Proceeding despite dependencies.
>>> --->  Deactivating readline 5.2.007_0
>>> --->  Uninstalling readline 5.2.007_0
>>> $ sudo port install apache2
>>> --->  Building db44 with target all
>>> Error: Target org.macports.build returned: shell command " cd "/ 
>>> opt/local/var/macports/build/ 
>>> _opt_local_var_macports_sources_rsync.macports.org_release_ports_dat 
>>> abases_db44/work/db-4.4.20/build_unix" && make all " returned  
>>> error 2
>>> Command output: /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.0  
>>> -c -O2  -I../dist/.. -I/opt/local/include ../dist/../db_dump185/ 
>>> db_dump185.c
>>>  /usr/bin/gcc-4.0 -c -O2 -I../dist/.. -I/opt/local/include ../ 
>>> dist/../db_dump185/db_dump185.c  -fno-common -DPIC -o .libs/ 
>>> db_dump185.o
>>> ../dist/../db_dump185/db_dump185.c: In function 'main':
>>> ../dist/../db_dump185/db_dump185.c:212: warning: assignment makes  
>>> pointer from integer without a cast
>>> ../dist/../db_dump185/db_dump185.c:214: warning: assignment makes  
>>> pointer from integer without a cast
>>> ../dist/../db_dump185/db_dump185.c:229: error: 'struct __db' has  
>>> no member named 'seq'
>>> ../dist/../db_dump185/db_dump185.c:229: error: 'R_NEXT'  
>>> undeclared (first use in this function)
>>> ../dist/../db_dump185/db_dump185.c:229: error: (Each undeclared  
>>> identifier is reported only once
>>> ../dist/../db_dump185/db_dump185.c:229: error: for each function  
>>> it appears in.)
>>> ../dist/../db_dump185/db_dump185.c:234: error: 'struct __db' has  
>>> no member named 'seq'
>>> ../dist/../db_dump185/db_dump185.c: In function 'db_hash':
>>> ../dist/../db_dump185/db_dump185.c:262: error: 'struct __db' has  
>>> no member named 'internal'
>>> ../dist/../db_dump185/db_dump185.c:264: error: 'struct __db' has  
>>> no member named 'internal'
>>> ../dist/../db_dump185/db_dump185.c: In function 'db_btree':
>>> ../dist/../db_dump185/db_dump185.c:289: error: 'struct __db' has  
>>> no member named 'internal'
>>> make: *** [db_dump185.lo] Error 1
>>>
>>> Error: The following dependencies failed to build: apr-util db44  
>>> sqlite3 gawk readline
>>> Error: Status 1 encountered during processing.
>>> $
>>>
>>> On Dec 14, 2007, at 2:16 PM, Daniel J. Luke wrote:
>>>
>>>> On Dec 14, 2007, at 12:40 PM, Chris Janton wrote:
>>>>> On 2007-12-13 , at 21:08 , Daniel J. Luke wrote:
>>>>>>> Error: The following dependencies failed to build: apr-util  
>>>>>>> db44 sqlite3 gawk openssl
>>>>>>> Error: Status 1 encountered during processing.
>>>>>>
>>>>>> This is probably related to:
>>>>>>
>>>>>> http://trac.macports.org/projects/macports/ticket/12040
>>>>>
>>>>>
>>>>> I have the dreaded "readline in /usr/local" problem.
>>>>> The resolution to the problem says re-install MacPorts from the  
>>>>> disk image and selfupdate to the latest version.
>>>>
>>>> That's the resolution if you are having problems building  
>>>> MacPorts, not if db44 is having problems.
>>>>
>>>> I would recommend removing your readline from /usr/local  
>>>> (perhaps just temporarily) so that db44 can be installed.
>>>>
>>>>> What happens to the long list of ports that I have active when  
>>>>> I re-install from the disk image?
>>>>>
>>>>> mac:/opt system$ sudo du -d 1 -h .
>>>>> 689M    ./local
>>>>> 689M    .
>>>>
>>>> Nothing should happen to them if you were to reinstall MacPorts  
>>>> (unless you remove /opt/local or files from within /opt/local),  
>>>> but it doesn't look like you need to reinstall MacPorts.


More information about the macports-users mailing list