building doxygen with wizard variant fails
Alejandro Aragon
alejandro.aragon at gmail.com
Tue Apr 8 14:38:45 PDT 2008
Hi Marcus,
I did what you mentioned and the installation went fine this time.
However, just before it finished, it had an error:
$sudo port install doxygen +wizard
---> Fetching doxygen
---> Attempting to fetch doxygen-1.5.5.src.tar.gz from ftp://ftp.stack.nl/pub/users/dimitri/
---> Verifying checksum(s) for doxygen
---> Extracting doxygen
---> Applying patches to doxygen
---> Configuring doxygen
---> Building doxygen with target all pdf
---> Staging doxygen into destroot
---> Installing doxygen 1.5.5_0+darwin_9+wizard
---> Activating doxygen 1.5.5_0+darwin_9+wizard
Error: Target org.macports.activate returned: Image error: /opt/local/
bin/doxygen already exists and does not belong to a registered port.
Unable to activate port doxygen.
Error: Status 1 encountered during processing.
I made sure that doxygen was not installed before this. Is this
something that needs to be fixed?
aa
On Apr 8, 2008, at 1:48 AM, Marcus Calhoun-Lopez wrote:
> In the same directory as the Portfile, there is a directory called
> files.
> Put the file qfiledefs_p.patch (downloaded from the Ticket page)
> into the files directory.
>
> Since it is not there now, MacPorts is trying (unsuccessfully) to
> download it.
>
> On Leopard, I have the wizard variant working but not the wizardapp
> variant.
>
> -Marcus
>
> On Apr 7, 2008, at 11:12 PM, Alejandro Aragon wrote:
>> I downloaded the .diff file and applied the patch manually. Then:
>>
>> aaragon@/opt/local/var/macports/sources/rsync.macports.org/release/
>> ports/textproc/doxygen$sudo port -v install doxygen +wizard
>> ---> Fetching doxygen
>> ---> qfiledefs_p.patch doesn't seem to exist in /opt/local/var/
>> macports/distfiles/doxygen
>> ---> Attempting to fetch qfiledefs_p.patch from http://svn.macports.org/repository/macports/distfiles/doxygen
>> % Total % Received % Xferd Average Speed Time Time
>> Time Current
>> Dload Upload Total Spent
>> Left Speed
>> 0 0 0 0 0 0 0 0 --:--:-- --:--:--
>> --:--:-- 0
>> ---> Attempting to fetch qfiledefs_p.patch from http://svn.macports.org/repository/macports/distfiles/general/
>> % Total % Received % Xferd Average Speed Time Time
>> Time Current
>> Dload Upload Total Spent
>> Left Speed
>> 0 0 0 0 0 0 0 0 --:--:-- --:--:--
>> --:--:-- 0
>> ---> Attempting to fetch qfiledefs_p.patch from http://svn.macports.org/repository/macports/downloads/doxygen
>> % Total % Received % Xferd Average Speed Time Time
>> Time Current
>> Dload Upload Total Spent
>> Left Speed
>> 0 0 0 0 0 0 0 0 --:--:-- --:--:--
>> --:--:-- 0
>> Error: Target org.macports.fetch returned: fetch failed
>> Warning: the following items did not execute (for doxygen):
>> org.macports.activate org.macports.fetch org.macports.extract
>> org.macports.checksum org.macports.patch org.macports.configure
>> org.macports.build org.macports.destroot org.macports.install
>> Error: Status 1 encountered during processing.
>>
>> and the same with the wizardapp variant. I went to that location in
>> the repository and doxygen does not exist.
>>
>> Am I doing something wrong here or the patch is not good?
>>
>> aa
>>
>> On Apr 7, 2008, at 11:21 PM, Marcus Calhoun-Lopez wrote:
>>
>>> There is some discussion about this issue (as well as a patch) on
>>> the ticket:
>>> http://trac.macports.org/projects/macports/ticket/14603
>>>
>>> -Marcus
>>>
>>> On Apr 7, 2008, at 9:15 PM, Alejandro Aragon wrote:
>>>> Hello everyone,
>>>>
>>>> I tried to build doxygen with the doxywizard variant, which
>>>> depends on qt and I had these errors:
>>>>
>>>> aaragon@~$sudo port install doxygen +wizard
>>>> ---> Fetching doxygen
>>>> ---> Verifying checksum(s) for doxygen
>>>> ---> Extracting doxygen
>>>> ---> Applying patches to doxygen
>>>> ---> Configuring doxygen
>>>> ---> Building doxygen with target all pdf
>>>> Error: Target org.macports.build returned: shell command " cd "/
>>>> opt/local/var/macports/build/
>>>> _opt_local_var_macports_sources_rsync
>>>> .macports.org_release_ports_textproc_doxygen/work/doxygen-1.5.4"
>>>> && make all pdf " returned error 2
>>>> Command output: doxywizard.cpp:1414: error: 'fn' was not declared
>>>> in this scope
>>>> doxywizard.cpp:1416: error: 'QFile' was not declared in this scope
>>>> doxywizard.cpp:1416: error: expected `;' before 'f'
>>>> doxywizard.cpp:1417: error: 'f' was not declared in this scope
>>>> doxywizard.cpp:1417: error: 'IO_WriteOnly' was not declared in
>>>> this scope
>>>> doxywizard.cpp:1419: error: 'QTextStream' was not declared in
>>>> this scope
>>>> doxywizard.cpp:1419: error: expected `;' before 't'
>>>> doxywizard.cpp:1420: error: 't' was not declared in this scope
>>>> doxywizard.cpp:1420: error: invalid use of undefined type 'struct
>>>> QTextEdit'
>>>> doxywizard.h:15: error: forward declaration of 'struct QTextEdit'
>>>> doxywizard.cpp:1421: error: 'statusBar' was not declared in this
>>>> scope
>>>> doxywizard.cpp:1425: error: 'QMessageBox' has not been declared
>>>> doxywizard.cpp:1426: error: 'warning' was not declared in this
>>>> scope
>>>> doxywizard.cpp: In function 'int main(int, char**)':
>>>> doxywizard.cpp:1435: error: 'QApplication' was not declared in
>>>> this scope
>>>> doxywizard.cpp:1435: error: expected `;' before 'a'
>>>> doxywizard.cpp:850: error: 'MainWidget::~MainWidget()' is private
>>>> doxywizard.cpp:1436: error: within this context
>>>> doxywizard.cpp:1119: error: 'void
>>>> MainWidget::loadConfigFromFile(int)' is private
>>>> doxywizard.cpp:1439: error: within this context
>>>> doxywizard.cpp:1439: error: invalid conversion from 'char*' to
>>>> 'int'
>>>> doxywizard.cpp:1439: error: initializing argument 1 of 'void
>>>> MainWidget::loadConfigFromFile(int)'
>>>> doxywizard.cpp:1443: error: 'printf' was not declared in this scope
>>>> doxywizard.cpp:1446: error: 'a' was not declared in this scope
>>>> doxywizard.cpp:1447: error: 'class MainWidget' has no member
>>>> named 'show'
>>>> gmake[2]: *** [obj/doxywizard.o] Error 1
>>>> gmake[2]: Leaving directory `/opt/local/var/macports/build/
>>>> _opt_local_var_macports_sources_rsync
>>>> .macports.org_release_ports_textproc_doxygen/work/doxygen-1.5.4/
>>>> addon/doxywizard'
>>>> gmake[1]: *** [all] Error 2
>>>> gmake[1]: Leaving directory `/opt/local/var/macports/build/
>>>> _opt_local_var_macports_sources_rsync
>>>> .macports.org_release_ports_textproc_doxygen/work/doxygen-1.5.4/
>>>> addon/doxywizard'
>>>> make: *** [all] Error 2
>>>>
>>>> aa
>>>>
>>>> _______________________________________________
>>>> macports-users mailing list
>>>> macports-users at lists.macosforge.org
>>>> http://lists.macosforge.org/mailman/listinfo/macports-users
>>>
>>
>
More information about the macports-users
mailing list