building doxygen with wizard variant fails

Marcus Calhoun-Lopez marcuscalhounlopez at mac.com
Tue Apr 8 18:21:41 PDT 2008 

Excellent.

The variant wizard builds doxywizard, which is an X11 program build  
with qt3.
The variant wizardapp builds a regular double clickable Mac OS  
application
(Doxywizard.app in /Applications/MacPorts) which then in turn runs  
doxywizard.

wizardapp used to work, but it broke some time ago (either because of  
a doxygen upgrade or an OS upgrade).
The error on Leopard is "LSOpenFromURLSpec() failed with error -10810".
Neither I, nor the maintainer, nor anyone else has put in the effort  
to make it work again.
No one seems to have a strong incentive to get it to work.

-Marcus

On Apr 8, 2008, at 7:05 PM, Alejandro Aragon wrote:
> Marcus,
>
> I uninstalled doxygen, deleted files doxygen, doxytag and doxywizard  
> from /opt/local. Reinstalled doxygen with wizard option, and now the  
> installation went smoothly. Now:
>
> aaragon@/opt/local/bin$port provides doxygen
> /opt/local/bin/doxygen is provided by: doxygen
>
> so I guess everything is fine. I would like to ask you also what is  
> the difference between wizard and wizard-app? and why the wizard-app  
> does not work?
>
> aa
>
> On Apr 8, 2008, at 7:52 PM, Marcus Calhoun-Lopez wrote:
>
>> There may be a bug in the Portfile, but it has been working for me.
>> I have also had this problem after I interrupted an installation  
>> during the Activation phase.
>>
>> Since /opt/local/bin/doxygen does not belong to any port, I would  
>> remove it manually.
>> Once doxygen is installed, you can make sure that it is not a bug  
>> with the command:
>> port provides /opt/local/bin/doxygen
>>
>> If all went well, this should belong to the port doxygen.
>>
>> -Marcus
>>
>> On Apr 8, 2008, at 3:38 PM, Alejandro Aragon wrote:
>>> Hi Marcus,
>>>
>>> I did what you mentioned and the installation went fine this time.  
>>> However, just  before it finished, it had an error:
>>>
>>> $sudo port install doxygen +wizard
>>> --->  Fetching doxygen
>>> --->  Attempting to fetch doxygen-1.5.5.src.tar.gz from ftp://ftp.stack.nl/pub/users/dimitri/
>>> --->  Verifying checksum(s) for doxygen
>>> --->  Extracting doxygen
>>> --->  Applying patches to doxygen
>>> --->  Configuring doxygen
>>> --->  Building doxygen with target all pdf
>>> --->  Staging doxygen into destroot
>>> --->  Installing doxygen 1.5.5_0+darwin_9+wizard
>>> --->  Activating doxygen 1.5.5_0+darwin_9+wizard
>>> Error: Target org.macports.activate returned: Image error: /opt/ 
>>> local/bin/doxygen already exists and does not belong to a  
>>> registered port.  Unable to activate port doxygen.
>>> Error: Status 1 encountered during processing.
>>>
>>>
>>> I made sure that doxygen was not installed before this. Is this  
>>> something that needs to be fixed?
>>>
>>> aa
>>>
>>> On Apr 8, 2008, at 1:48 AM, Marcus Calhoun-Lopez wrote:
>>>
>>>> In the same directory as the Portfile, there is a directory  
>>>> called files.
>>>> Put the file qfiledefs_p.patch (downloaded from the Ticket page)  
>>>> into the files directory.
>>>>
>>>> Since it is not there now, MacPorts is trying (unsuccessfully) to  
>>>> download it.
>>>>
>>>> On Leopard, I have the wizard variant working but not the  
>>>> wizardapp variant.
>>>>
>>>> -Marcus
>>>>
>>>> On Apr 7, 2008, at 11:12 PM, Alejandro Aragon wrote:
>>>>> I downloaded the .diff file and applied the patch manually. Then:
>>>>>
>>>>> aaragon@/opt/local/var/macports/sources/rsync.macports.org/ 
>>>>> release/ports/textproc/doxygen$sudo port -v install doxygen  
>>>>> +wizard
>>>>> --->  Fetching doxygen
>>>>> --->  qfiledefs_p.patch doesn't seem to exist in /opt/local/var/ 
>>>>> macports/distfiles/doxygen
>>>>> --->  Attempting to fetch qfiledefs_p.patch from http://svn.macports.org/repository/macports/distfiles/doxygen
>>>>> % Total    % Received % Xferd  Average Speed   Time    Time      
>>>>> Time  Current
>>>>>                             Dload  Upload   Total   Spent     
>>>>> Left  Speed
>>>>> 0     0    0     0    0     0      0      0 --:--:-- --:--:--  
>>>>> --:--:--     0
>>>>> --->  Attempting to fetch qfiledefs_p.patch from http://svn.macports.org/repository/macports/distfiles/general/
>>>>> % Total    % Received % Xferd  Average Speed   Time    Time      
>>>>> Time  Current
>>>>>                             Dload  Upload   Total   Spent     
>>>>> Left  Speed
>>>>> 0     0    0     0    0     0      0      0 --:--:-- --:--:--  
>>>>> --:--:--     0
>>>>> --->  Attempting to fetch qfiledefs_p.patch from http://svn.macports.org/repository/macports/downloads/doxygen
>>>>> % Total    % Received % Xferd  Average Speed   Time    Time      
>>>>> Time  Current
>>>>>                             Dload  Upload   Total   Spent     
>>>>> Left  Speed
>>>>> 0     0    0     0    0     0      0      0 --:--:-- --:--:--  
>>>>> --:--:--     0
>>>>> Error: Target org.macports.fetch returned: fetch failed
>>>>> Warning: the following items did not execute (for doxygen):  
>>>>> org.macports.activate org.macports.fetch org.macports.extract  
>>>>> org.macports.checksum org.macports.patch org.macports.configure  
>>>>> org.macports.build org.macports.destroot org.macports.install
>>>>> Error: Status 1 encountered during processing.
>>>>>
>>>>> and the same with the wizardapp variant. I went to that location  
>>>>> in the repository and doxygen does not exist.
>>>>>
>>>>> Am I doing something wrong here or the patch is not good?
>>>>>
>>>>> aa
>>>>>
>>>>> On Apr 7, 2008, at 11:21 PM, Marcus Calhoun-Lopez wrote:
>>>>>
>>>>>> There is some discussion about this issue (as well as a patch)  
>>>>>> on the ticket:
>>>>>> http://trac.macports.org/projects/macports/ticket/14603
>>>>>>
>>>>>> -Marcus
>>>>>>
>>>>>> On Apr 7, 2008, at 9:15 PM, Alejandro Aragon wrote:
>>>>>>> Hello everyone,
>>>>>>>
>>>>>>> I tried to build doxygen with the doxywizard variant, which  
>>>>>>> depends on qt and I had these errors:
>>>>>>>
>>>>>>> aaragon@~$sudo port install doxygen +wizard
>>>>>>> --->  Fetching doxygen
>>>>>>> --->  Verifying checksum(s) for doxygen
>>>>>>> --->  Extracting doxygen
>>>>>>> --->  Applying patches to doxygen
>>>>>>> --->  Configuring doxygen
>>>>>>> --->  Building doxygen with target all pdf
>>>>>>> Error: Target org.macports.build returned: shell command " cd  
>>>>>>> "/opt/local/var/macports/build/ 
>>>>>>> _opt_local_var_macports_sources_rsync 
>>>>>>> .macports.org_release_ports_textproc_doxygen/work/ 
>>>>>>> doxygen-1.5.4" && make all pdf " returned error 2
>>>>>>> Command output: doxywizard.cpp:1414: error: 'fn' was not  
>>>>>>> declared in this scope
>>>>>>> doxywizard.cpp:1416: error: 'QFile' was not declared in this  
>>>>>>> scope
>>>>>>> doxywizard.cpp:1416: error: expected `;' before 'f'
>>>>>>> doxywizard.cpp:1417: error: 'f' was not declared in this scope
>>>>>>> doxywizard.cpp:1417: error: 'IO_WriteOnly' was not declared in  
>>>>>>> this scope
>>>>>>> doxywizard.cpp:1419: error: 'QTextStream' was not declared in  
>>>>>>> this scope
>>>>>>> doxywizard.cpp:1419: error: expected `;' before 't'
>>>>>>> doxywizard.cpp:1420: error: 't' was not declared in this scope
>>>>>>> doxywizard.cpp:1420: error: invalid use of undefined type  
>>>>>>> 'struct QTextEdit'
>>>>>>> doxywizard.h:15: error: forward declaration of 'struct  
>>>>>>> QTextEdit'
>>>>>>> doxywizard.cpp:1421: error: 'statusBar' was not declared in  
>>>>>>> this scope
>>>>>>> doxywizard.cpp:1425: error: 'QMessageBox' has not been declared
>>>>>>> doxywizard.cpp:1426: error: 'warning' was not declared in this  
>>>>>>> scope
>>>>>>> doxywizard.cpp: In function 'int main(int, char**)':
>>>>>>> doxywizard.cpp:1435: error: 'QApplication' was not declared in  
>>>>>>> this scope
>>>>>>> doxywizard.cpp:1435: error: expected `;' before 'a'
>>>>>>> doxywizard.cpp:850: error: 'MainWidget::~MainWidget()' is  
>>>>>>> private
>>>>>>> doxywizard.cpp:1436: error: within this context
>>>>>>> doxywizard.cpp:1119: error: 'void  
>>>>>>> MainWidget::loadConfigFromFile(int)' is private
>>>>>>> doxywizard.cpp:1439: error: within this context
>>>>>>> doxywizard.cpp:1439: error: invalid conversion from 'char*' to  
>>>>>>> 'int'
>>>>>>> doxywizard.cpp:1439: error:   initializing argument 1 of 'void  
>>>>>>> MainWidget::loadConfigFromFile(int)'
>>>>>>> doxywizard.cpp:1443: error: 'printf' was not declared in this  
>>>>>>> scope
>>>>>>> doxywizard.cpp:1446: error: 'a' was not declared in this scope
>>>>>>> doxywizard.cpp:1447: error: 'class MainWidget' has no member  
>>>>>>> named 'show'
>>>>>>> gmake[2]: *** [obj/doxywizard.o] Error 1
>>>>>>> gmake[2]: Leaving directory `/opt/local/var/macports/build/ 
>>>>>>> _opt_local_var_macports_sources_rsync 
>>>>>>> .macports.org_release_ports_textproc_doxygen/work/ 
>>>>>>> doxygen-1.5.4/addon/doxywizard'
>>>>>>> gmake[1]: *** [all] Error 2
>>>>>>> gmake[1]: Leaving directory `/opt/local/var/macports/build/ 
>>>>>>> _opt_local_var_macports_sources_rsync 
>>>>>>> .macports.org_release_ports_textproc_doxygen/work/ 
>>>>>>> doxygen-1.5.4/addon/doxywizard'
>>>>>>> make: *** [all] Error 2
>>>>>>>
>>>>>>> aa
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> macports-users mailing list
>>>>>>> macports-users at lists.macosforge.org
>>>>>>> http://lists.macosforge.org/mailman/listinfo/macports-users
>>>>>>
>>>>>
>>>>
>>>
>>
>

More information about the macports-users mailing list