Can not get Net::SysLog installed

[Scott Haneda]

Can someone tell me where I am going wrong with this port?

Creating software index in /Users/me/macports
Adding port perl/p5-file-readbackwards
Adding port perl/p5-mail-spf
Adding port perl/p5-mail-spf-query
Adding port perl/p5-mail-srs
Adding port perl/p5-net-cidr-lite
Adding port perl/p5-net-ip-match-regexp
Adding port perl/p5-net-senderbase
Adding port perl/p5-net-syslog
Adding port perl/p5-tie-dbi

Total number of ports parsed:	9
Ports successfully parsed:	9	
Ports failed:			0


/Users/me/macports/perl/p5-net-syslog
cat Portfile
# $Id$
PortSystem 1.0
PortGroup perl5 1.0

perl5.setup             net-syslog 0.03
maintainers             hostwizard.com:scott

description             Net::Syslog - Perl extension for sending  
syslog messages directly to a remote syslogd.

long_description        Net::Syslog implements the intra-host syslog  
forwarding \
			protocol. It is not intended to replace the Sys::Syslog \
			or Unix::Syslog modules, but instead to provide a method \
			of using syslog when a local syslogd is unavailable or \
			when you don't want to write syslog messages to the \
			local syslog

homepage		http://search.cpan.org/~lhoward/Net-Syslog-0.03/Syslog.pm

checksums           	md5     0201f8ac355c6509e8f232179f0a54fd \
                     	sha1    8b633f4f51540eb94240157e7c7683658ed4461b \
                     	rmd160  309b3d18afc6ddbfb0eba4a1aaba5b6aa0c45397

platforms               darwin


* I am in this ports dir /Users/me/macports/perl/p5-net-syslog

Below is lint, clean, and isntall..

---***------***------***------***------***------***------***---
$sudo port lint
--->  Verifying Portfile for p5-net-syslog
--->  0 errors and 0 warnings found.

---***------***------***------***------***------***------***---
$sudo port -d clean
DEBUG: Changing to port directory: /Users/me/macports/perl/p5-net-syslog
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing  
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- 
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/ 
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-net-syslog.
DEBUG: Requested variant i386 is not provided by port p5-net-syslog.
DEBUG: Requested variant macosx is not provided by port p5-net-syslog.
DEBUG: Changing to port directory: /Users/me/macports/perl/p5-net-syslog
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing  
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- 
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/ 
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-net-syslog.
DEBUG: Requested variant i386 is not provided by port p5-net-syslog.
DEBUG: Requested variant macosx is not provided by port p5-net-syslog.
DEBUG: Executing org.macports.main (p5-net-syslog)
--->  Cleaning p5-net-syslog
DEBUG: Executing org.macports.clean (p5-net-syslog)
--->  Removing build directory for p5-net-syslog
DEBUG: Removing directory: /opt/local/var/macports/build/ 
_Users_me_macports_perl_p5-net-syslog
DEBUG: delete: /opt/local/var/macports/build/ 
_Users_me_macports_perl_p5-net-syslog
DEBUG: Removing symlink: /Users/me/macports/perl/p5-net-syslog/work
DEBUG: delete: /Users/me/macports/perl/p5-net-syslog/work

---***------***------***------***------***------***------***---
$sudo port -d install
DEBUG: Changing to port directory: /Users/me/macports/perl/p5-net-syslog
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing  
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- 
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/ 
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-net-syslog.
DEBUG: Requested variant i386 is not provided by port p5-net-syslog.
DEBUG: Requested variant macosx is not provided by port p5-net-syslog.
DEBUG: Changing to port directory: /Users/me/macports/perl/p5-net-syslog
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing  
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- 
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/ 
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-net-syslog.
DEBUG: Requested variant i386 is not provided by port p5-net-syslog.
DEBUG: Requested variant macosx is not provided by port p5-net-syslog.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: Changing to port directory: /opt/local/var/macports/sources/ 
rsync.macports.org/release/ports/lang/perl5
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing  
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- 
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default  
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Executing org.macports.main (p5-net-syslog)
--->  Fetching p5-net-syslog
DEBUG: Executing org.macports.fetch (p5-net-syslog)
--->  Verifying checksum(s) for p5-net-syslog
DEBUG: Executing org.macports.checksum (p5-net-syslog)
--->  Checksumming net-syslog-0.03.tar.gz
DEBUG: Correct (md5) checksum for net-syslog-0.03.tar.gz
DEBUG: Correct (sha1) checksum for net-syslog-0.03.tar.gz
DEBUG: Correct (rmd160) checksum for net-syslog-0.03.tar.gz
--->  Extracting p5-net-syslog
DEBUG: Executing org.macports.extract (p5-net-syslog)
--->  Extracting net-syslog-0.03.tar.gz
DEBUG: setting option extract.args to /opt/local/var/macports/ 
distfiles/perl5/net-syslog-0.03.tar.gz
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ 
_Users_me_macports_perl_p5-net-syslog/work" && gzip -dc /opt/local/var/ 
macports/distfiles/perl5/net-syslog-0.03.tar.gz | /usr/bin/gnutar --no- 
same-owner -xf -'

gzip: /opt/local/var/macports/distfiles/perl5/net-syslog-0.03.tar.gz:  
not in gzip format
DEBUG: Executing org.macports.patch (p5-net-syslog)
--->  Configuring p5-net-syslog
DEBUG: Using compiler 'Mac OS X gcc 4.0'
DEBUG: Executing org.macports.configure (p5-net-syslog)
DEBUG: Environment: CFLAGS='-O2' CPPFLAGS='-I/opt/local/include'  
CXXFLAGS='-O2' MACOSX_DEPLOYMENT_TARGET='10.5' CPP='/usr/bin/cpp-4.0'  
CXX='/usr/bin/g++-4.0' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib'  
FCFLAGS='-O2' OBJC='/usr/bin/gcc-4.0' INSTALL='/usr/bin/install -c'  
OBJCFLAGS='-O2' FFLAGS='-O2' CC='/usr/bin/gcc-4.0'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ 
_Users_me_macports_perl_p5-net-syslog/work/net-syslog-0.03" && /opt/ 
local/bin/perl Makefile.PL INSTALLDIRS=vendor'
sh: line 0: cd: /opt/local/var/macports/build/ 
_Users_me_macports_perl_p5-net-syslog/work/net-syslog-0.03: No such  
file or directory
Error: Target org.macports.configure returned: configure failure:  
shell command " cd "/opt/local/var/macports/build/ 
_Users_me_macports_perl_p5-net-syslog/work/net-syslog-0.03" && /opt/ 
local/bin/perl Makefile.PL INSTALLDIRS=vendor " returned error 1
Command output: sh: line 0: cd: /opt/local/var/macports/build/ 
_Users_me_macports_perl_p5-net-syslog/work/net-syslog-0.03: No such  
file or directory

Warning: the following items did not execute (for p5-net-syslog):  
org.macports.activate org.macports.configure org.macports.build  
org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.

--
Scott