Problem installing rb-gnome2

[Nation, Carey]

Hi,

I'm trying to install using: sudo port install rb-gnome2.  It does quite
a lot of dependencies and then dies trying to install rb-opengl.  The
error is something about sed failing and Makefile.glut not existing.

 

The output of sudo port install -d rb-opengl is below.  Any ideas?
Thanks!

 

Warning: No default port source specified in
/opt/local/etc/macports/sources.conf, using last source as default

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/ruby
/rb-opengl

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/ruby/rb-ope
ngl

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Using group file
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/group/ruby-1.0.tcl

DEBUG: adding the default universal variant

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: Requested variant darwin is not provided by port rb-opengl.

DEBUG: Requested variant i386 is not provided by port rb-opengl.

DEBUG: Requested variant macosx is not provided by port rb-opengl.

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/lang
/ruby

DEBUG: epoch: in tree: 0 installed: 0

DEBUG: ruby 1.8.7-p174_0 exists in the ports tree

DEBUG: ruby 1.8.7-p174_0 +darwin+thread_hooks is the latest installed

DEBUG: ruby 1.8.7-p174_0 +darwin+thread_hooks is active

DEBUG: Merging existing variants darwin thread_hooks into variants

DEBUG: new fully merged portvariants: thread_hooks +

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/lang/ruby

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: universal variant already exists, so not adding the default one

DEBUG: Requested variant i386 is not provided by port ruby.

DEBUG: Requested variant macosx is not provided by port ruby.

DEBUG: Executing variant darwin provides darwin

DEBUG: Executing variant thread_hooks provides thread_hooks

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/text
proc/libiconv

DEBUG: epoch: in tree: 0 installed: 0

DEBUG: libiconv 1.13_0 exists in the ports tree

DEBUG: libiconv 1.13_0  is the latest installed

DEBUG: libiconv 1.13_0  is active

DEBUG: Merging existing variants  into variants

DEBUG: new fully merged portvariants: 

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/textproc/li
biconv

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Using group file
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/group/muniversal-1.0.tcl

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: universal variant already exists, so not adding the default one

DEBUG: Requested variant darwin is not provided by port libiconv.

DEBUG: Requested variant i386 is not provided by port libiconv.

DEBUG: Requested variant macosx is not provided by port libiconv.

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/deve
l/gperf

DEBUG: epoch: in tree: 0 installed: 0

DEBUG: gperf 3.0.4_0 exists in the ports tree

DEBUG: gperf 3.0.4_0  is the latest installed

DEBUG: gperf 3.0.4_0  is active

DEBUG: Merging existing variants  into variants

DEBUG: new fully merged portvariants: 

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/devel/gperf

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Using group file
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/group/muniversal-1.0.tcl

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: universal variant already exists, so not adding the default one

DEBUG: Requested variant darwin is not provided by port gperf.

DEBUG: Requested variant i386 is not provided by port gperf.

DEBUG: Requested variant macosx is not provided by port gperf.

DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0

DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/deve
l/readline

DEBUG: epoch: in tree: 0 installed: 0

DEBUG: readline 6.0.000_2 exists in the ports tree

DEBUG: readline 6.0.000_2 +darwin is the latest installed

DEBUG: readline 6.0.000_2 +darwin is active

DEBUG: Merging existing variants darwin into variants

DEBUG: new fully merged portvariants: 

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/devel/readl
ine

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Using group file
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/group/muniversal-1.0.tcl

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: universal variant already exists, so not adding the default one

DEBUG: Requested variant i386 is not provided by port readline.

DEBUG: Requested variant macosx is not provided by port readline.

DEBUG: Executing variant darwin provides darwin

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/deve
l/ncurses

DEBUG: epoch: in tree: 0 installed: 0

DEBUG: ncurses 5.7_0 exists in the ports tree

DEBUG: ncurses 5.7_0  is the latest installed

DEBUG: ncurses 5.7_0  is active

DEBUG: Merging existing variants  into variants

DEBUG: new fully merged portvariants: 

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/devel/ncurs
es

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Using group file
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/group/muniversal-1.0.tcl

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: universal variant already exists, so not adding the default one

DEBUG: Requested variant darwin is not provided by port ncurses.

DEBUG: Requested variant i386 is not provided by port ncurses.

DEBUG: Requested variant macosx is not provided by port ncurses.

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/deve
l/ncursesw

DEBUG: epoch: in tree: 0 installed: 0

DEBUG: ncursesw 5.7_0 exists in the ports tree

DEBUG: ncursesw 5.7_0  is the latest installed

DEBUG: ncursesw 5.7_0  is active

DEBUG: Merging existing variants  into variants

DEBUG: new fully merged portvariants: 

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/devel/ncurs
esw

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Using group file
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/group/muniversal-1.0.tcl

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: universal variant already exists, so not adding the default one

DEBUG: Requested variant darwin is not provided by port ncursesw.

DEBUG: Requested variant i386 is not provided by port ncursesw.

DEBUG: Requested variant macosx is not provided by port ncursesw.

DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0

DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0

DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/deve
l/openssl

DEBUG: epoch: in tree: 1 installed: 1

DEBUG: openssl 0.9.8k_0 exists in the ports tree

DEBUG: openssl 0.9.8k_0 +darwin is the latest installed

DEBUG: openssl 0.9.8k_0 +darwin is active

DEBUG: Merging existing variants darwin into variants

DEBUG: new fully merged portvariants: 

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/devel/opens
sl

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: Using group file
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/group/muniversal-1.0.tcl

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: universal variant already exists, so not adding the default one

DEBUG: Requested variant i386 is not provided by port openssl.

DEBUG: Requested variant macosx is not provided by port openssl.

DEBUG: Executing variant darwin provides darwin

DEBUG: Found port in
file:///opt/local/var/macports/sources/www.macports.org/files/ports/arch
ivers/zlib

DEBUG: epoch: in tree: 0 installed: 0

DEBUG: zlib 1.2.3_3 exists in the ports tree

DEBUG: zlib 1.2.3_3  is the latest installed

DEBUG: zlib 1.2.3_3  is active

DEBUG: Merging existing variants  into variants

DEBUG: new fully merged portvariants: 

DEBUG: Changing to port directory:
/opt/local/var/macports/sources/www.macports.org/files/ports/archivers/z
lib

DEBUG: OS Platform: darwin

DEBUG: OS Version: 9.8.0

DEBUG: Mac OS X Version: 10.5

DEBUG: System Arch: i386

DEBUG: setting option os.universal_supported to yes

DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided

DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided

DEBUG: adding the default universal variant

DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/www.macports.org/files/ports/_resources/
port1.0/variant_descriptions.conf

DEBUG: Requested variant darwin is not provided by port zlib.

DEBUG: Requested variant i386 is not provided by port zlib.

DEBUG: Requested variant macosx is not provided by port zlib.

DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3

DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0

DEBUG: No need to upgrade! ruby 1.8.7-p174_0 >= ruby 1.8.7-p174_0

--->  Computing dependencies for rb-opengl

DEBUG: Searching for dependency: ruby

DEBUG: Found Dependency: receipt exists for ruby

DEBUG: Executing org.macports.main (rb-opengl)

DEBUG: Skipping completed org.macports.fetch (rb-opengl)

DEBUG: Skipping completed org.macports.checksum (rb-opengl)

DEBUG: Skipping completed org.macports.extract (rb-opengl)

DEBUG: Skipping completed org.macports.patch (rb-opengl)

--->  Configuring rb-opengl

DEBUG: Using compiler 'Mac OS X gcc 4.0'

DEBUG: Executing org.macports.configure (rb-opengl)

DEBUG: Environment: CFLAGS='-O2 -arch i386'
CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch i386'
MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2
-m32' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2
-m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch i386'
FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0'

DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_www.macpo
rts.org_files_ports_ruby_rb-opengl/work/opengl-0.32g" &&
/opt/local/bin/ruby -rvendor-specific extconf.rb --prefix=/opt/local'

creating Makefile

creating Makefile

DEBUG: Executing proc-post-org.macports.configure-configure-0

DEBUG: couldn't read file "Makefile.glut": no such file or directory

    while executing

"exec /usr/bin/sed {s|^CFLAGS.*$|&
-I/System/Library/Frameworks/OpenGL.framework/Headers
-I/System/Library/Frameworks/GLUT.framework/Headers|} < Make..."

    ("eval" body line 1)

    invoked from within

"eval exec $cmdline"

Error: reinplace: couldn't read file "Makefile.glut": no such file or
directory

Error: Target org.macports.configure returned: reinplace sed(1) failed

DEBUG: Backtrace: reinplace sed(1) failed

    while executing

"$post $targetname"

Warning: the following items did not execute (for rb-opengl):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install

Error: Status 1 encountered during processing.

 

________________________________

Carey Nation <mailto:carey.nation at cnn.com>  

Lead Software Engineer

CNN BEST

Broadcast Production Systems

Video Solutions Group

(404)827-2935 (wk)

(404)824-0033 (cell)

________________________________

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20090930/77231121/attachment.html>