dbus-glib will not upgrade
nam
drnamba at mac.com
Tue Apr 13 22:54:38 PDT 2010
Hello
I have problem in upgrading dbus-glib 0.80 to 0.86.
Macbook 2.16G mid2007 10.5.8
Any idea?
Nam
----------------------
$ sudo port -d upgrade dbus-glib
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus-glib 0.86_0 exists in the ports tree
DEBUG: dbus-glib 0.80_0 +universal is the latest installed
DEBUG: dbus-glib 0.80_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/dbus-glib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port dbus-glib.
DEBUG: Requested variant i386 is not provided by port dbus-glib.
DEBUG: Requested variant macosx is not provided by port dbus-glib.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 +universal is the latest installed
DEBUG: pkgconfig 0.23_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 +universal is the latest installed
DEBUG: expat 2.0.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 +universal is the latest installed
DEBUG: libiconv 1.13.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 +universal is the latest installed
DEBUG: gperf 3.0.4_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.22.5_0 exists in the ports tree
DEBUG: glib2 2.22.5_0 +darwin+universal is the latest installed
DEBUG: glib2 2.22.5_0 +darwin+universal is active
DEBUG: Merging existing variants darwin universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/glib2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port glib2.
DEBUG: Requested variant macosx is not provided by port glib2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_1 exists in the ports tree
DEBUG: autoconf 2.65_1 is the latest installed
DEBUG: autoconf 2.65_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 +universal is the latest installed
DEBUG: perl5.8 5.8.9_3 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.14_0 exists in the ports tree
DEBUG: m4 1.4.14_0 +universal is the latest installed
DEBUG: m4 1.4.14_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1 +universal is the latest installed
DEBUG: help2man 1.37.1_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2 is the latest installed
DEBUG: p5-locale-gettext 1.05_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port p5-locale-
gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-
gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 +universal is the latest installed
DEBUG: gettext 0.17_4 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +universal is the latest installed
DEBUG: ncurses 5.7_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant universal provides universal
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +universal is the latest installed
DEBUG: ncursesw 5.7_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-
gettext 1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0 +universal is the latest installed
DEBUG: automake 1.11.1_0 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_1 exists in the ports tree
DEBUG: libtool 2.2.6b_1 +darwin+universal is the latest installed
DEBUG: libtool 2.2.6b_1 +darwin+universal is active
DEBUG: Merging existing variants darwin universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python_select 0.3_0 exists in the ports tree
DEBUG: python_select 0.3_0 +darwin_9 is the latest installed
DEBUG: python_select 0.3_0 +darwin_9+universal is active
DEBUG: Merging existing variants darwin_9 universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/sysutils/python_select
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port python_select.
DEBUG: Requested variant i386 is not provided by port python_select.
DEBUG: Requested variant macosx is not provided by port python_select.
DEBUG: Executing variant darwin_9 provides darwin_9
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
DEBUG: No need to upgrade! glib2 2.22.5_0 >= glib2 2.22.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus 1.2.16_1 exists in the ports tree
DEBUG: dbus 1.2.16_1 +universal is the latest installed
DEBUG: dbus 1.2.16_1 +universal is active
DEBUG: Merging existing variants universal into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/dbus
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port dbus.
DEBUG: Requested variant i386 is not provided by port dbus.
DEBUG: Requested variant macosx is not provided by port dbus.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1
---> Computing dependencies for dbus-glib
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Searching for dependency: dbus
DEBUG: Found Dependency: receipt exists for dbus
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Executing org.macports.main (dbus-glib)
---> Fetching dbus-glib
DEBUG: Executing org.macports.fetch (dbus-glib)
---> Verifying checksum(s) for dbus-glib
DEBUG: Executing org.macports.checksum (dbus-glib)
---> Checksumming dbus-glib-0.86.tar.gz
DEBUG: Correct (md5) checksum for dbus-glib-0.86.tar.gz
DEBUG: Correct (sha1) checksum for dbus-glib-0.86.tar.gz
DEBUG: Correct (rmd160) checksum for dbus-glib-0.86.tar.gz
---> Extracting dbus-glib
DEBUG: Executing org.macports.extract (dbus-glib)
---> Extracting dbus-glib-0.86.tar.gz
DEBUG: setting option extract.args to /opt/local/var/macports/
distfiles/dbus-glib/dbus-glib-0.86.tar.gz
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_devel_dbus-glib/work" && /usr/bin/gzip -
dc /opt/local/var/macports/distfiles/dbus-glib/dbus-glib-0.86.tar.gz
| /usr/bin/gnutar --no-same-owner -xf -'
DEBUG: Executing org.macports.patch (dbus-glib)
---> Configuring dbus-glib
DEBUG: Using compiler 'Mac OS X gcc 4.0'
DEBUG: Executing org.macports.configure (dbus-glib)
---> Configuring dbus-glib for architecture ppc
DEBUG: Environment: CFLAGS='-O2 -arch ppc' CPPFLAGS='-I/opt/local/
include' CXXFLAGS='-O2 -arch ppc' MACOSX_DEPLOYMENT_TARGET='10.5'
CXX='/usr/bin/g++-4.0' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib -arch
ppc' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2' INSTALL='/usr/bin/install -
c' OBJCFLAGS='-O2 -arch ppc' FFLAGS='-O2' CC='/usr/bin/gcc-4.0'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc"
&& ./configure --prefix=/opt/local --disable-dependency-tracking --
disable-doxygen-docs --disable-dependency-tracking --host=powerpc-
apple-darwin9.8.0'
configure: WARNING: If you wanted to set the --build type, don't use --
host.
If a cross compiler is detected then cross compile mode will be
used.
checking build system type... i386-apple-darwin9.8.0
checking host system type... powerpc-apple-darwin9.8.0
checking target system type... powerpc-apple-darwin9.8.0
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for powerpc-apple-darwin9.8.0-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of
Makefiles... no
checking for powerpc-apple-darwin9.8.0-gcc... /usr/bin/gcc-4.0
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /usr/bin/gcc-4.0 accepts -g... yes
checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of /usr/bin/gcc-4.0... none
checking for library containing strerror... none required
checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
checking for grep that handles long lines and -e... /opt/local/bin/grep
checking for egrep... /opt/local/bin/grep -E
checking for ANSI C header files... yes
checking whether gcc understands -Wfloat-equal... yes
checking for a sed that does not truncate output... /opt/local/bin/gsed
checking for fgrep... /opt/local/bin/grep -F
checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-
apple-darwin9/4.0.1/ld
checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld)
is GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... no
checking for powerpc-apple-darwin9.8.0-dumpbin... no
checking for powerpc-apple-darwin9.8.0-link... no
checking for dumpbin... no
checking for link... link -dump -symbols
checking the name lister (link -dump -symbols) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to
reload object files... -r
checking for powerpc-apple-darwin9.8.0-objdump... no
checking for objdump... no
checking how to recognize dependent libraries... pass_all
checking for powerpc-apple-darwin9.8.0-ar... no
checking for ar... ar
checking for powerpc-apple-darwin9.8.0-strip... strip
checking for powerpc-apple-darwin9.8.0-ranlib... no
checking for ranlib... ranlib
checking command to parse link -dump -symbols output from /usr/bin/
gcc-4.0 object... failed
checking for powerpc-apple-darwin9.8.0-dsymutil... no
checking for dsymutil... dsymutil
checking for powerpc-apple-darwin9.8.0-nmedit... no
checking for nmedit... nmedit
checking for powerpc-apple-darwin9.8.0-lipo... no
checking for lipo... lipo
checking for powerpc-apple-darwin9.8.0-otool... no
checking for otool... otool
checking for powerpc-apple-darwin9.8.0-otool64... no
checking for otool64... no
checking for -single_module linker flag... no
checking for -exported_symbols_list linker flag... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-
apple-darwin9/4.0.1/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin9.8.0 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for library containing socket... none required
checking whether socklen_t is defined... yes
checking abstract socket namespace... no
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... no
checking for bindtextdomain in -lintl... yes
checking for ngettext in -lintl... yes
checking for dgettext in -lintl... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /opt/local/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /opt/local/bin/msgfmt
checking for xgettext... /opt/local/bin/xgettext
./configure: line 13694: ./po/POTFILES.in: No such file or directory
checking for XML_ParserCreate_MM in -lexpat... yes
checking expat.h usability... yes
checking expat.h presence... yes
checking for expat.h... yes
checking for powerpc-apple-darwin9.8.0-pkg-config... no
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for DBUS... yes
checking for DBUS_GLIB... yes
checking for DBUS_GLIB_THREADS... yes
checking whether to build gtk-doc documentation... no
checking for gtkdoc-check... /opt/local/bin/gtkdoc-check
checking for doxygen... no
checking whether to build Doxygen documentation... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating m4/Makefile
config.status: creating doc/Makefile
config.status: creating doc/reference/Makefile
config.status: creating doc/reference/version.xml
config.status: creating dbus/Makefile
config.status: creating dbus/examples/Makefile
config.status: creating dbus/examples/statemachine/Makefile
config.status: creating test/Makefile
config.status: creating test/core/Makefile
config.status: creating test/interfaces/Makefile
config.status: creating test/data/valid-service-files/debug-glib.service
config.status: creating test/data/valid-service-files/debug-echo.service
config.status: creating test/data/valid-service-files/interfaces-
test.service
config.status: creating tools/Makefile
config.status: creating dbus-glib-1.pc
config.status: creating dbus-glib-1-uninstalled.pc
config.status: creating Doxyfile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
D-BUS GLIB BINDINGS 0.86
==============
prefix: /opt/local
exec_prefix: ${prefix}
libdir: /opt/local/lib
bindir: /opt/local/bin
sysconfdir: /opt/local/etc
localstatedir: /opt/local/var
datadir: ${prefix}/share
source code location: .
compiler: /usr/bin/gcc-4.0
cflags: -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing
cppflags: -I/opt/local/include
Doxygen: no
Maintainer mode: no
gcc coverage profiling: no
Building unit tests: no
Building verbose mode: no
Building assertions: no
Building checks: yes
Building Doxygen docs: no
Building Gtk-doc docs: no
Bash Completion: yes
Gettext libs (empty OK): -lintl
Using XML parser:
'make check' socket dir:
---> Configuring dbus-glib for architecture i386
DEBUG: Environment: CFLAGS='-O2 -arch i386' CPPFLAGS='-I/opt/local/
include' CXXFLAGS='-O2 -arch i386' MACOSX_DEPLOYMENT_TARGET='10.5'
CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib -
arch i386' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32' INSTALL='/usr/
bin/install -c' OBJCFLAGS='-O2 -arch i386' FFLAGS='-O2 -m32' CC='/usr/
bin/gcc-4.0'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-i386"
&& ./configure --prefix=/opt/local --disable-dependency-tracking --
disable-dependency-tracking --disable-doxygen-docs --disable-
dependency-tracking '
checking build system type... i386-apple-darwin9.8.0
checking host system type... i386-apple-darwin9.8.0
checking target system type... i386-apple-darwin9.8.0
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of
Makefiles... no
checking for gcc... /usr/bin/gcc-4.0
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /usr/bin/gcc-4.0 accepts -g... yes
checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of /usr/bin/gcc-4.0... none
checking for library containing strerror... none required
checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
checking for grep that handles long lines and -e... /opt/local/bin/grep
checking for egrep... /opt/local/bin/grep -E
checking for ANSI C header files... yes
checking whether gcc understands -Wfloat-equal... yes
checking for a sed that does not truncate output... /opt/local/bin/gsed
checking for fgrep... /opt/local/bin/grep -F
checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-
apple-darwin9/4.0.1/ld
checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld)
is GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -p
checking the name lister (/usr/bin/nm -p) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to
reload object files... -r
checking for objdump... no
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0
object... ok
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... no
checking for -exported_symbols_list linker flag... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-
apple-darwin9/4.0.1/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin9.8.0 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for library containing socket... none required
checking whether socklen_t is defined... yes
checking abstract socket namespace... no
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... no
checking for bindtextdomain in -lintl... yes
checking for ngettext in -lintl... yes
checking for dgettext in -lintl... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /opt/local/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /opt/local/bin/msgfmt
checking for xgettext... /opt/local/bin/xgettext
./configure: line 13694: ./po/POTFILES.in: No such file or directory
checking for XML_ParserCreate_MM in -lexpat... yes
checking expat.h usability... yes
checking expat.h presence... yes
checking for expat.h... yes
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for DBUS... yes
checking for DBUS_GLIB... yes
checking for DBUS_GLIB_THREADS... yes
checking whether to build gtk-doc documentation... no
checking for gtkdoc-check... /opt/local/bin/gtkdoc-check
checking for doxygen... no
checking whether to build Doxygen documentation... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating m4/Makefile
config.status: creating doc/Makefile
config.status: creating doc/reference/Makefile
config.status: creating doc/reference/version.xml
config.status: creating dbus/Makefile
config.status: creating dbus/examples/Makefile
config.status: creating dbus/examples/statemachine/Makefile
config.status: creating test/Makefile
config.status: creating test/core/Makefile
config.status: creating test/interfaces/Makefile
config.status: creating test/data/valid-service-files/debug-glib.service
config.status: creating test/data/valid-service-files/debug-echo.service
config.status: creating test/data/valid-service-files/interfaces-
test.service
config.status: creating tools/Makefile
config.status: creating dbus-glib-1.pc
config.status: creating dbus-glib-1-uninstalled.pc
config.status: creating Doxyfile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
D-BUS GLIB BINDINGS 0.86
==============
prefix: /opt/local
exec_prefix: ${prefix}
libdir: /opt/local/lib
bindir: /opt/local/bin
sysconfdir: /opt/local/etc
localstatedir: /opt/local/var
datadir: ${prefix}/share
source code location: .
compiler: /usr/bin/gcc-4.0
cflags: -O2 -arch i386 -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing
cppflags: -I/opt/local/include
Doxygen: no
Maintainer mode: no
gcc coverage profiling: no
Building unit tests: no
Building verbose mode: no
Building assertions: no
Building checks: yes
Building Doxygen docs: no
Building Gtk-doc docs: no
Bash Completion: yes
Gettext libs (empty OK): -lintl
Using XML parser:
'make check' socket dir:
DEBUG: Executing proc-post-org.macports.configure-configure-0
---> Building dbus-glib
DEBUG: Executing org.macports.build (dbus-glib)
---> Building dbus-glib for architecture ppc
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc"
&& /usr/bin/make -j1 all'
/usr/bin/make all-recursive
Making all in dbus
/usr/bin/make all-recursive
Making all in .
CC dbus-glib.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-glib.lo dbus-glib.c
CC dbus-gmain.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gmain.lo dbus-gmain.c
CC dbus-gmarshal.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gmarshal.lo dbus-gmarshal.c
CC dbus-gobject.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gobject.lo dbus-gobject.c
dbus-gobject.c: In function 'dbus_set_g_error':
dbus-gobject.c:2128: warning: control may reach end of non-void
function 'dbus_error_to_gerror_code' being inlined
CC dbus-gproxy.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gproxy.lo dbus-gproxy.c
CC dbus-gtest.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gtest.lo dbus-gtest.c
CC dbus-gvalue.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gvalue.lo dbus-gvalue.c
CC dbus-gthread.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gthread.lo dbus-gthread.c
CC dbus-gtype-specialized.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gtype-specialized.lo dbus-gtype-specialized.c
CC dbus-gutils.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gutils.lo dbus-gutils.c
CC dbus-gsignature.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gsignature.lo dbus-gsignature.c
CC dbus-gvalue-utils.lo
/bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0
-DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/
opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/
local/lib/glib-2.0/include -I/opt/local/include -
DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/
opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-
declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -
Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o
dbus-gvalue-utils.lo dbus-gvalue-utils.c
CCLD libdbus-glib-1.la
../libtool: eval: line 941: syntax error near unexpected token `|'
../libtool: eval: line 941: `link -dump -symbols .libs/dbus-
glib.o .libs/dbus-gmain.o .libs/dbus-gmarshal.o .libs/dbus-
gobject.o .libs/dbus-gproxy.o .libs/dbus-gtest.o .libs/dbus-
gvalue.o .libs/dbus-gthread.o .libs/dbus-gtype-specialized.o .libs/
dbus-gutils.o .libs/dbus-gsignature.o .libs/dbus-gvalue-utils.o |
| /opt/local/bin/gsed 's/.* //' | sort | uniq > .libs/libdbus-
glib-1.exp'
make[4]: *** [libdbus-glib-1.la] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd "/opt/
local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc"
&& /usr/bin/make -j1 all " returned error 2
DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc"
&& /usr/bin/make -j1 all " returned error 2
while executing
"$procedure $targetname"
Warning: the following items did not execute (for dbus-glib):
org.macports.destroot org.macports.build
DEBUG:
Error: Unable to upgrade port: 1
To report a bug, see <http://guide.macports.org/#project.tickets>
More information about the macports-users
mailing list