dbus-glib: gtkdoc-rebase: command not found (was: Installing port GIMP)
Evangeline Han
evanbejin at gmail.com
Fri May 7 21:42:27 PDT 2010
*I tried again but there was another error. Can you please help me? The
complete response is as follows:-*
Last login: Sat May 8 09:52:38 on ttyp1
sudo port install gimp; exit
Welcome to Darwin!
samuel-hans-ibook-g4:~ evangeline$ sudo port install gimp; exit
Password:
---> Computing dependencies for gimp
---> Fetching xmlcatmgr
---> Attempting to fetch xmlcatmgr-2.2.tar.gz from
http://voxel.dl.sourceforge.net/xmlcatmgr
---> Verifying checksum(s) for xmlcatmgr
---> Extracting xmlcatmgr
---> Configuring xmlcatmgr
---> Building xmlcatmgr
---> Staging xmlcatmgr into destroot
---> Installing xmlcatmgr @2.2_1
---> Activating xmlcatmgr @2.2_1
---> Cleaning xmlcatmgr
---> Fetching docbook-xml-4.1.2
---> Attempting to fetch docbkx412.zip from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/docbook-xml-4.1.2
---> Verifying checksum(s) for docbook-xml-4.1.2
---> Extracting docbook-xml-4.1.2
---> Configuring docbook-xml-4.1.2
---> Building docbook-xml-4.1.2
---> Staging docbook-xml-4.1.2 into destroot
---> Installing docbook-xml-4.1.2 @4.1.2_1
---> Activating docbook-xml-4.1.2 @4.1.2_1
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xml/docbook/4.1.2/catalog.xml".
######################################################################
---> Cleaning docbook-xml-4.1.2
---> Fetching docbook-xml-4.2
---> Attempting to fetch docbook-xml-4.2.zip from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/docbook-xml-4.2
---> Verifying checksum(s) for docbook-xml-4.2
---> Extracting docbook-xml-4.2
---> Configuring docbook-xml-4.2
---> Building docbook-xml-4.2
---> Staging docbook-xml-4.2 into destroot
---> Installing docbook-xml-4.2 @4.2_0
---> Activating docbook-xml-4.2 @4.2_0
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xml/docbook/4.2/catalog.xml".
######################################################################
---> Cleaning docbook-xml-4.2
---> Fetching docbook-xml-4.3
---> Attempting to fetch docbook-xml-4.3.zip from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/docbook-xml-4.3
---> Verifying checksum(s) for docbook-xml-4.3
---> Extracting docbook-xml-4.3
---> Configuring docbook-xml-4.3
---> Building docbook-xml-4.3
---> Staging docbook-xml-4.3 into destroot
---> Installing docbook-xml-4.3 @4.3_0
---> Activating docbook-xml-4.3 @4.3_0
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xml/docbook/4.3/catalog.xml".
######################################################################
---> Cleaning docbook-xml-4.3
---> Fetching docbook-xml-4.4
---> Attempting to fetch docbook-xml-4.4.zip from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/docbook-xml-4.4
---> Verifying checksum(s) for docbook-xml-4.4
---> Extracting docbook-xml-4.4
---> Configuring docbook-xml-4.4
---> Building docbook-xml-4.4
---> Staging docbook-xml-4.4 into destroot
---> Installing docbook-xml-4.4 @4.4_0
---> Activating docbook-xml-4.4 @4.4_0
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xml/docbook/4.4/catalog.xml".
######################################################################
---> Cleaning docbook-xml-4.4
---> Fetching docbook-xml-4.5
---> Attempting to fetch docbook-xml-4.5.zip from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/docbook-xml-4.5
---> Verifying checksum(s) for docbook-xml-4.5
---> Extracting docbook-xml-4.5
---> Configuring docbook-xml-4.5
---> Building docbook-xml-4.5
---> Staging docbook-xml-4.5 into destroot
---> Installing docbook-xml-4.5 @4.5_0
---> Activating docbook-xml-4.5 @4.5_0
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xml/docbook/4.5/catalog.xml".
######################################################################
---> Cleaning docbook-xml-4.5
---> Fetching docbook-xml-5.0
---> Attempting to fetch docbook-5.0.zip from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/docbook-xml-5.0
---> Verifying checksum(s) for docbook-xml-5.0
---> Extracting docbook-xml-5.0
---> Configuring docbook-xml-5.0
---> Building docbook-xml-5.0
---> Staging docbook-xml-5.0 into destroot
---> Installing docbook-xml-5.0 @5.0_0
---> Activating docbook-xml-5.0 @5.0_0
---> Cleaning docbook-xml-5.0
---> Fetching docbook-xml
---> Verifying checksum(s) for docbook-xml
---> Extracting docbook-xml
---> Configuring docbook-xml
---> Building docbook-xml
---> Staging docbook-xml into destroot
---> Installing docbook-xml @5.0_0
---> Activating docbook-xml @5.0_0
---> Cleaning docbook-xml
---> Fetching docbook-xsl
---> Attempting to fetch docbook-xsl-1.75.2.tar.bz2 from
http://voxel.dl.sourceforge.net/docbook
---> Verifying checksum(s) for docbook-xsl
---> Extracting docbook-xsl
---> Configuring docbook-xsl
---> Building docbook-xsl
---> Staging docbook-xsl into destroot
---> Installing docbook-xsl @1.75.2_0
---> Activating docbook-xsl @1.75.2_0
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xsl/docbook-xsl/catalog.xml".
######################################################################
---> Cleaning docbook-xsl
---> Fetching iso-codes
---> Attempting to fetch iso-codes_3.16.orig.tar.bz2 from
http://ftp.au.debian.org/debian/pool/main/i/iso-codes/
---> Verifying checksum(s) for iso-codes
---> Extracting iso-codes
---> Configuring iso-codes
---> Building iso-codes
---> Staging iso-codes into destroot
---> Installing iso-codes @3.16_0
---> Activating iso-codes @3.16_0
---> Cleaning iso-codes
---> Fetching libxml2
---> Attempting to fetch libxml2-2.7.7.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/libxml2
---> Verifying checksum(s) for libxml2
---> Extracting libxml2
---> Configuring libxml2
---> Building libxml2
---> Staging libxml2 into destroot
---> Installing libxml2 @2.7.7_0
---> Activating libxml2 @2.7.7_0
---> Cleaning libxml2
---> Fetching libxslt
---> Attempting to fetch libxslt-1.1.26.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/libxslt
---> Verifying checksum(s) for libxslt
---> Extracting libxslt
---> Configuring libxslt
---> Building libxslt
---> Staging libxslt into destroot
---> Installing libxslt @1.1.26_0
---> Activating libxslt @1.1.26_0
---> Cleaning libxslt
---> Fetching p5-xml-parser
---> Attempting to fetch XML-Parser-2.36.tar.gz from
http://mirror.internode.on.net/pub/cpan/modules/by-module/XML
---> Verifying checksum(s) for p5-xml-parser
---> Extracting p5-xml-parser
---> Configuring p5-xml-parser
---> Building p5-xml-parser
---> Staging p5-xml-parser into destroot
---> Installing p5-xml-parser @2.36_0
---> Activating p5-xml-parser @2.36_0
---> Cleaning p5-xml-parser
---> Fetching bzip2
---> Attempting to fetch bzip2-1.0.5.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/bzip2
---> Verifying checksum(s) for bzip2
---> Extracting bzip2
---> Applying patches to bzip2
---> Configuring bzip2
---> Building bzip2
---> Staging bzip2 into destroot
---> Installing bzip2 @1.0.5_3+darwin
---> Activating bzip2 @1.0.5_3+darwin
---> Cleaning bzip2
---> Fetching db46
---> Attempting to fetch patch.4.6.21.1 from
http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/
---> Attempting to fetch patch.4.6.21.2 from
http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/
---> Attempting to fetch patch.4.6.21.3 from
http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/
---> Attempting to fetch patch.4.6.21.4 from
http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/
---> Attempting to fetch db-4.6.21.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/db4/4.6.21_6
---> Verifying checksum(s) for db46
---> Extracting db46
---> Applying patches to db46
---> Configuring db46
---> Building db46
---> Staging db46 into destroot
---> Installing db46 @4.6.21_6
---> Activating db46 @4.6.21_6
---> Cleaning db46
---> Fetching gdbm
---> Attempting to fetch gdbm-1.8.3.tar.gz from
http://mirror.internode.on.net/pub/gnu/gdbm
---> Verifying checksum(s) for gdbm
---> Extracting gdbm
---> Configuring gdbm
---> Building gdbm
---> Staging gdbm into destroot
---> Installing gdbm @1.8.3_2
---> Activating gdbm @1.8.3_2
---> Cleaning gdbm
---> Fetching readline
---> Attempting to fetch readline-6.1.tar.gz from
http://mirror.internode.on.net/pub/gnu/readline
---> Verifying checksum(s) for readline
---> Extracting readline
---> Applying patches to readline
---> Configuring readline
---> Building readline
---> Staging readline into destroot
---> Installing readline @6.1.000_1+darwin
---> Activating readline @6.1.000_1+darwin
---> Cleaning readline
---> Fetching sqlite3
---> Attempting to fetch sqlite-3.6.23.1.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/sqlite3
---> Verifying checksum(s) for sqlite3
---> Extracting sqlite3
---> Configuring sqlite3
---> Building sqlite3
---> Staging sqlite3 into destroot
---> Installing sqlite3 @3.6.23.1_0+darwin_8
---> Activating sqlite3 @3.6.23.1_0+darwin_8
---> Cleaning sqlite3
---> Fetching freetype
---> Attempting to fetch freetype-2.3.12.tar.bz2 from
http://voxel.dl.sourceforge.net/freetype
---> Attempting to fetch freetype-doc-2.3.12.tar.bz2 from
http://voxel.dl.sourceforge.net/freetype
---> Verifying checksum(s) for freetype
---> Extracting freetype
---> Applying patches to freetype
---> Configuring freetype
---> Building freetype
---> Staging freetype into destroot
---> Installing freetype @2.3.12_0+macosx
---> Activating freetype @2.3.12_0+macosx
---> Cleaning freetype
---> Fetching fontconfig
---> Attempting to fetch fontconfig-2.8.0.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/fontconfig
---> Verifying checksum(s) for fontconfig
---> Extracting fontconfig
---> Applying patches to fontconfig
---> Configuring fontconfig
---> Building fontconfig
---> Staging fontconfig into destroot
---> Installing fontconfig @2.8.0_0+macosx
---> Activating fontconfig @2.8.0_0+macosx
---> Cleaning fontconfig
---> Fetching xorg-bigreqsproto
---> Attempting to fetch bigreqsproto-1.1.0.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-bigreqsproto
---> Verifying checksum(s) for xorg-bigreqsproto
---> Extracting xorg-bigreqsproto
---> Configuring xorg-bigreqsproto
---> Building xorg-bigreqsproto
---> Staging xorg-bigreqsproto into destroot
---> Installing xorg-bigreqsproto @1.1.0_0
---> Activating xorg-bigreqsproto @1.1.0_0
---> Cleaning xorg-bigreqsproto
---> Fetching xorg-inputproto
---> Attempting to fetch inputproto-2.0.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-inputproto
---> Verifying checksum(s) for xorg-inputproto
---> Extracting xorg-inputproto
---> Configuring xorg-inputproto
---> Building xorg-inputproto
---> Staging xorg-inputproto into destroot
---> Installing xorg-inputproto @2.0_0
---> Activating xorg-inputproto @2.0_0
---> Cleaning xorg-inputproto
---> Fetching xorg-kbproto
---> Attempting to fetch kbproto-1.0.4.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-kbproto
---> Verifying checksum(s) for xorg-kbproto
---> Extracting xorg-kbproto
---> Configuring xorg-kbproto
---> Building xorg-kbproto
---> Staging xorg-kbproto into destroot
---> Installing xorg-kbproto @1.0.4_0
---> Activating xorg-kbproto @1.0.4_0
---> Cleaning xorg-kbproto
---> Fetching xorg-xproto
---> Attempting to fetch xproto-7.0.16.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-xproto
---> Verifying checksum(s) for xorg-xproto
---> Extracting xorg-xproto
---> Configuring xorg-xproto
---> Building xorg-xproto
---> Staging xorg-xproto into destroot
---> Installing xorg-xproto @7.0.16_0
---> Activating xorg-xproto @7.0.16_0
---> Cleaning xorg-xproto
---> Fetching xorg-libXau
---> Attempting to fetch libXau-1.0.5.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-libXau
---> Verifying checksum(s) for xorg-libXau
---> Extracting xorg-libXau
---> Configuring xorg-libXau
---> Building xorg-libXau
---> Staging xorg-libXau into destroot
---> Installing xorg-libXau @1.0.5_0
---> Activating xorg-libXau @1.0.5_0
---> Cleaning xorg-libXau
---> Fetching xorg-libXdmcp
---> Attempting to fetch libXdmcp-1.0.3.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-libXdmcp
---> Verifying checksum(s) for xorg-libXdmcp
---> Extracting xorg-libXdmcp
---> Configuring xorg-libXdmcp
---> Building xorg-libXdmcp
---> Staging xorg-libXdmcp into destroot
---> Installing xorg-libXdmcp @1.0.3_0
---> Activating xorg-libXdmcp @1.0.3_0
---> Cleaning xorg-libXdmcp
---> Fetching xorg-util-macros
---> Attempting to fetch util-macros-1.7.0.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-util-macros
---> Verifying checksum(s) for xorg-util-macros
---> Extracting xorg-util-macros
---> Configuring xorg-util-macros
---> Building xorg-util-macros
---> Staging xorg-util-macros into destroot
---> Installing xorg-util-macros @1.7.0_0
---> Activating xorg-util-macros @1.7.0_0
---> Cleaning xorg-util-macros
---> Fetching xorg-xcmiscproto
---> Attempting to fetch xcmiscproto-1.2.0.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-xcmiscproto
---> Verifying checksum(s) for xorg-xcmiscproto
---> Extracting xorg-xcmiscproto
---> Configuring xorg-xcmiscproto
---> Building xorg-xcmiscproto
---> Staging xorg-xcmiscproto into destroot
---> Installing xorg-xcmiscproto @1.2.0_0
---> Activating xorg-xcmiscproto @1.2.0_0
---> Cleaning xorg-xcmiscproto
---> Fetching xorg-xextproto
---> Attempting to fetch xextproto-7.1.1.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-xextproto
---> Verifying checksum(s) for xorg-xextproto
---> Extracting xorg-xextproto
---> Configuring xorg-xextproto
---> Building xorg-xextproto
---> Staging xorg-xextproto into destroot
---> Installing xorg-xextproto @7.1.1_0
---> Activating xorg-xextproto @7.1.1_0
---> Cleaning xorg-xextproto
---> Fetching xorg-xf86bigfontproto
---> Attempting to fetch xf86bigfontproto-1.2.0.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-xf86bigfontproto
---> Verifying checksum(s) for xorg-xf86bigfontproto
---> Extracting xorg-xf86bigfontproto
---> Configuring xorg-xf86bigfontproto
---> Building xorg-xf86bigfontproto
---> Staging xorg-xf86bigfontproto into destroot
---> Installing xorg-xf86bigfontproto @1.2.0_0
---> Activating xorg-xf86bigfontproto @1.2.0_0
---> Cleaning xorg-xf86bigfontproto
---> Fetching xorg-xtrans
---> Attempting to fetch xtrans-1.2.5.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-xtrans
---> Verifying checksum(s) for xorg-xtrans
---> Extracting xorg-xtrans
---> Configuring xorg-xtrans
---> Building xorg-xtrans
---> Staging xorg-xtrans into destroot
---> Installing xorg-xtrans @1.2.5_0
---> Activating xorg-xtrans @1.2.5_0
---> Cleaning xorg-xtrans
---> Fetching xorg-libX11
---> Attempting to fetch libX11-1.3.3.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-libX11
---> Verifying checksum(s) for xorg-libX11
---> Extracting xorg-libX11
---> Configuring xorg-libX11
---> Building xorg-libX11
---> Staging xorg-libX11 into destroot
---> Installing xorg-libX11 @1.3.3_0
---> Activating xorg-libX11 @1.3.3_0
---> Cleaning xorg-libX11
---> Fetching xorg-renderproto
---> Attempting to fetch renderproto-0.11.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-renderproto
---> Verifying checksum(s) for xorg-renderproto
---> Extracting xorg-renderproto
---> Configuring xorg-renderproto
---> Building xorg-renderproto
---> Staging xorg-renderproto into destroot
---> Installing xorg-renderproto @0.11_0
---> Activating xorg-renderproto @0.11_0
---> Cleaning xorg-renderproto
---> Fetching xrender
---> Attempting to fetch libXrender-0.9.5.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xrender
---> Verifying checksum(s) for xrender
---> Extracting xrender
---> Configuring xrender
---> Building xrender
---> Staging xrender into destroot
---> Installing xrender @0.9.5_0
---> Activating xrender @0.9.5_0
---> Cleaning xrender
---> Fetching Xft2
---> Attempting to fetch libXft-2.1.14.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/Xft2
---> Verifying checksum(s) for Xft2
---> Extracting Xft2
---> Configuring Xft2
---> Building Xft2
---> Staging Xft2 into destroot
---> Installing Xft2 @2.1.14_0
---> Activating Xft2 @2.1.14_0
---> Cleaning Xft2
---> Fetching tcl
---> Attempting to fetch tcl8.5.8-src.tar.gz from
http://voxel.dl.sourceforge.net/tcl
---> Verifying checksum(s) for tcl
---> Extracting tcl
---> Configuring tcl
---> Building tcl
---> Staging tcl into destroot
---> Installing tcl @8.5.8_0+darwin
---> Activating tcl @8.5.8_0+darwin
---> Cleaning tcl
---> Fetching xorg-libXext
---> Attempting to fetch libXext-1.1.1.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-libXext
---> Verifying checksum(s) for xorg-libXext
---> Extracting xorg-libXext
---> Configuring xorg-libXext
---> Building xorg-libXext
---> Staging xorg-libXext into destroot
---> Installing xorg-libXext @1.1.1_0
---> Activating xorg-libXext @1.1.1_0
---> Cleaning xorg-libXext
---> Fetching xorg-scrnsaverproto
---> Attempting to fetch scrnsaverproto-1.2.0.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-scrnsaverproto
---> Verifying checksum(s) for xorg-scrnsaverproto
---> Extracting xorg-scrnsaverproto
---> Configuring xorg-scrnsaverproto
---> Building xorg-scrnsaverproto
---> Staging xorg-scrnsaverproto into destroot
---> Installing xorg-scrnsaverproto @1.2.0_0
---> Activating xorg-scrnsaverproto @1.2.0_0
---> Cleaning xorg-scrnsaverproto
---> Fetching xorg-libXScrnSaver
---> Attempting to fetch libXScrnSaver-1.2.0.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/xorg-libXScrnSaver
---> Verifying checksum(s) for xorg-libXScrnSaver
---> Extracting xorg-libXScrnSaver
---> Configuring xorg-libXScrnSaver
---> Building xorg-libXScrnSaver
---> Staging xorg-libXScrnSaver into destroot
---> Installing xorg-libXScrnSaver @1.2.0_0
---> Activating xorg-libXScrnSaver @1.2.0_0
---> Cleaning xorg-libXScrnSaver
---> Fetching tk
---> Attempting to fetch tk8.5.8-src.tar.gz from
http://voxel.dl.sourceforge.net/tcl
---> Verifying checksum(s) for tk
---> Extracting tk
---> Configuring tk
---> Building tk
---> Staging tk into destroot
---> Installing tk @8.5.8_0+darwin
---> Activating tk @8.5.8_0+darwin
---> Cleaning tk
---> Fetching python26
---> Attempting to fetch Python-2.6.5.tar.bz2 from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/python26
---> Verifying checksum(s) for python26
---> Extracting python26
---> Applying patches to python26
---> Configuring python26
---> Building python26
---> Staging python26 into destroot
---> Installing python26 @2.6.5_0+darwin
---> Activating python26 @2.6.5_0+darwin
To fully complete your installation and make python 2.6 the default, please
run:
sudo port install python_select
sudo python_select python26
---> Cleaning python26
---> Fetching py26-libxml2
---> Attempting to fetch libxml2-python-2.6.21.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/python
---> Verifying checksum(s) for py26-libxml2
---> Extracting py26-libxml2
---> Applying patches to py26-libxml2
---> Configuring py26-libxml2
---> Building py26-libxml2
---> Staging py26-libxml2 into destroot
---> Installing py26-libxml2 @2.6.21_0
---> Activating py26-libxml2 @2.6.21_0
---> Cleaning py26-libxml2
---> Fetching getopt
---> Attempting to fetch getopt-1.1.4.tar.gz from
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/getopt
---> Verifying checksum(s) for getopt
---> Extracting getopt
---> Applying patches to getopt
---> Configuring getopt
---> Building getopt
---> Staging getopt into destroot
---> Installing getopt @1.1.4_1+darwin_8_powerpc
---> Activating getopt @1.1.4_1+darwin_8_powerpc
---> Cleaning getopt
---> Fetching gnome-common
---> Attempting to fetch gnome-common-2.26.0.tar.bz2 from
http://mirror.internode.on.net/pub/gnome/sources/gnome-common/2.26/
---> Verifying checksum(s) for gnome-common
---> Extracting gnome-common
---> Applying patches to gnome-common
---> Configuring gnome-common
---> Building gnome-common
---> Staging gnome-common into destroot
---> Installing gnome-common @2.26.0_0
---> Activating gnome-common @2.26.0_0
---> Cleaning gnome-common
---> Fetching p5-getopt-long
---> Attempting to fetch Getopt-Long-2.38.tar.gz from
http://mirror.internode.on.net/pub/cpan/modules/by-module/Getopt
---> Verifying checksum(s) for p5-getopt-long
---> Extracting p5-getopt-long
---> Configuring p5-getopt-long
---> Building p5-getopt-long
---> Staging p5-getopt-long into destroot
---> Installing p5-getopt-long @2.38_0
---> Activating p5-getopt-long @2.38_0
---> Cleaning p5-getopt-long
---> Fetching p5-pathtools
---> Attempting to fetch PathTools-3.31.tar.gz from
http://mirror.internode.on.net/pub/cpan/modules/by-module/../../authors/id/S/SM/SMUELLER/
---> Verifying checksum(s) for p5-pathtools
---> Extracting p5-pathtools
---> Configuring p5-pathtools
---> Building p5-pathtools
---> Staging p5-pathtools into destroot
---> Installing p5-pathtools @3.31_0
---> Activating p5-pathtools @3.31_0
---> Cleaning p5-pathtools
---> Fetching p5-scalar-list-utils
---> Attempting to fetch Scalar-List-Utils-1.23.tar.gz from
http://mirror.internode.on.net/pub/cpan/modules/by-module/Scalar
---> Verifying checksum(s) for p5-scalar-list-utils
---> Extracting p5-scalar-list-utils
---> Configuring p5-scalar-list-utils
---> Building p5-scalar-list-utils
---> Staging p5-scalar-list-utils into destroot
---> Installing p5-scalar-list-utils @1.23_0
---> Activating p5-scalar-list-utils @1.23_0
---> Cleaning p5-scalar-list-utils
---> Fetching intltool
---> Attempting to fetch intltool-0.40.6.tar.bz2 from
http://mirror.internode.on.net/pub/gnome/sources/intltool/0.40/
---> Verifying checksum(s) for intltool
---> Extracting intltool
---> Configuring intltool
---> Building intltool
---> Staging intltool into destroot
---> Installing intltool @0.40.6_0
---> Activating intltool @0.40.6_0
---> Cleaning intltool
---> Fetching rarian
---> Attempting to fetch rarian-0.8.1.tar.bz2 from
http://mirror.internode.on.net/pub/gnome/sources/rarian/0.8/
---> Verifying checksum(s) for rarian
---> Extracting rarian
---> Configuring rarian
---> Building rarian
---> Staging rarian into destroot
---> Installing rarian @0.8.1_0
---> Activating rarian @0.8.1_0
---> Cleaning rarian
---> Fetching gnome-doc-utils
---> Attempting to fetch gnome-doc-utils-0.18.1.tar.bz2 from
http://mirror.internode.on.net/pub/gnome/sources/gnome-doc-utils/0.18/
---> Verifying checksum(s) for gnome-doc-utils
---> Extracting gnome-doc-utils
---> Configuring gnome-doc-utils
---> Building gnome-doc-utils
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1"
&& /usr/bin/make all " returned error 2
Command output: --stringparam basename "utils" \
--stringparam xsl_file
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xslt/common/utils.xsl"
\
"./xsldoc-docbook.xsl" "C/utils.xsldoc"
if ! test -d de/; then mkdir de/; fi
if [ -f "C/gnome-doc-xslt.xml" ]; then d="../"; else
d="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/";
fi; \
po="de/de.po"; \
if [ -f "${po}" ]; then po="../${po}"; else
po="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/${po}";
fi; \
(cd de/ && \
PYTHONPATH="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po:/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po:"
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po/xml2po/xml2po"
-m docbook -e -p "${po}" \
"${d}C/gnome-doc-xslt.xml" > gnome-doc-xslt.xml.tmp && \
cp gnome-doc-xslt.xml.tmp gnome-doc-xslt.xml && rm -f
gnome-doc-xslt.xml.tmp)
Traceback (most recent call last):
File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po/xml2po/xml2po",
line 185, in <module>
main(sys.argv[1:])
File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po/xml2po/xml2po",
line 88, in main
from xml2po import Main
File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/xml2po/xml2po/__init__.py",
line 25, in <module>
import tempfile
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/tempfile.py",
line 34, in <module>
from random import Random as _Random
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/random.py",
line 873, in <module>
_inst = Random()
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/random.py",
line 96, in __init__
self.seed(x)
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/random.py",
line 115, in seed
super(Random, self).seed(a)
SystemError: error return without exception set
make[2]: *** [de/gnome-doc-xslt.xml] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all-recursive] Error 1
Error: The following dependencies failed to build: gimp-app gimp2 dbus-glib
gtk-doc gnome-doc-utils gegl babl librsvg cairo libpixman libpng gtk2 atk
jasper jpeg pango shared-mime-info tiff xorg-libXcomposite
xorg-compositeproto xorg-libXfixes xorg-fixesproto xorg-libXcursor
xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama
xorg-xineramaproto xorg-libXrandr xorg-randrproto libart_lgpl libcroco
libgsf gconf orbit2 libidl policykit gnome-vfs desktop-file-utils popt
gnome-mime-data libbonobo w3m boehmgc ffmpeg XviD dirac cppunit faac mp4v2
faad2 gmake lame libogg libsdl libtheora libvorbis schroedinger orc liboil
x264 graphviz gd2 xpm xorg-libXt xorg-libsm xorg-libice ghostscript libpaper
urw-fonts xorg-libXaw groff xorg-libXmu libopenraw boost boost-jam libspiro
lua openexr ilmbase gsed lcms libexif libgnomeui gnome-icon-theme
hicolor-icon-theme icon-naming-utils p5-xml-simple p5-xml-namespacesupport
p5-xml-sax gnome-keyring libgcrypt libgpg-error libtasn1 libbonoboui
libglade2 libgnome esound audiofile libgnomecanvas libmng libwmf poppler
openjpeg poppler-data py25-gtk py25-cairo py25-numpy atlas gcc43 gmp mpfr
gzip texinfo lzmautils fftw-3 py25-nose py25-distribute python25
py25-gobject gimp-jp2 gimp-lqr-plugin liblqr gtk-nodoka-engine coreutils
gutenprint icns-gimp macclipboard-gimp macfile-gimp ufraw cfitsio dcraw
exiv2 gtkimageview xsane sane-backends libusb-compat libusb
Error: Status 1 encountered during processing.
Before reporting a bug, first run the command again with the -d flag to get
complete output.
logout
[Process completed]
*I ran the command again with the -d flag and the complete output is as
follows:-*
Last login: Sat May 8 09:52:52 on ttyp2
sudo port install gimp -d; exit
Welcome to Darwin!
samuel-hans-ibook-g4:~ evangeline$ sudo port install gimp -d; exit
Password:
---> Computing dependencies for gimp
---> Building gnome-doc-utils
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1"
&& /usr/bin/make all " returned error 2
Command output: Making all in gnome-doc-make
make[2]: Nothing to be done for `all'.
Making all in xslt
if ! test -d de/; then mkdir de/; fi
if [ -f "C/gnome-doc-xslt.xml" ]; then d="../"; else
d="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/";
fi; \
po="de/de.po"; \
if [ -f "${po}" ]; then po="../${po}"; else
po="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/${po}";
fi; \
(cd de/ && \
PYTHONPATH="/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po:/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po:"
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po/xml2po/xml2po"
-m docbook -e -p "${po}" \
"${d}C/gnome-doc-xslt.xml" > gnome-doc-xslt.xml.tmp && \
cp gnome-doc-xslt.xml.tmp gnome-doc-xslt.xml && rm -f
gnome-doc-xslt.xml.tmp)
Traceback (most recent call last):
File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po/xml2po/xml2po",
line 185, in <module>
main(sys.argv[1:])
File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/xslt/../../xml2po/xml2po/xml2po",
line 88, in main
from xml2po import Main
File
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/xml2po/xml2po/__init__.py",
line 25, in <module>
import tempfile
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/tempfile.py",
line 34, in <module>
from random import Random as _Random
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/random.py",
line 873, in <module>
_inst = Random()
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/random.py",
line 96, in __init__
self.seed(x)
File
"/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/random.py",
line 115, in seed
super(Random, self).seed(a)
SystemError: error return without exception set
make[2]: *** [de/gnome-doc-xslt.xml] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all-recursive] Error 1
Error: The following dependencies failed to build: gimp-app gimp2 dbus-glib
gtk-doc gnome-doc-utils gegl babl librsvg cairo libpixman libpng gtk2 atk
jasper jpeg pango shared-mime-info tiff xorg-libXcomposite
xorg-compositeproto xorg-libXfixes xorg-fixesproto xorg-libXcursor
xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama
xorg-xineramaproto xorg-libXrandr xorg-randrproto libart_lgpl libcroco
libgsf gconf orbit2 libidl policykit gnome-vfs desktop-file-utils popt
gnome-mime-data libbonobo w3m boehmgc ffmpeg XviD dirac cppunit faac mp4v2
faad2 gmake lame libogg libsdl libtheora libvorbis schroedinger orc liboil
x264 graphviz gd2 xpm xorg-libXt xorg-libsm xorg-libice ghostscript libpaper
urw-fonts xorg-libXaw groff xorg-libXmu libopenraw boost boost-jam libspiro
lua openexr ilmbase gsed lcms libexif libgnomeui gnome-icon-theme
hicolor-icon-theme icon-naming-utils p5-xml-simple p5-xml-namespacesupport
p5-xml-sax gnome-keyring libgcrypt libgpg-error libtasn1 libbonoboui
libglade2 libgnome esound audiofile libgnomecanvas libmng libwmf poppler
openjpeg poppler-data py25-gtk py25-cairo py25-numpy atlas gcc43 gmp mpfr
gzip texinfo lzmautils fftw-3 py25-nose py25-distribute python25
py25-gobject gimp-jp2 gimp-lqr-plugin liblqr gtk-nodoka-engine coreutils
gutenprint icns-gimp macclipboard-gimp macfile-gimp ufraw cfitsio dcraw
exiv2 gtkimageview xsane sane-backends libusb-compat libusb
Error: Status 1 encountered during processing.
Before reporting a bug, first run the command again with the -d flag to get
complete output.
logout
[Process completed]
*Please advice,
Evangeline
*
On Fri, May 7, 2010 at 10:00 AM, Ryan Schmidt <ryandesign at macports.org>wrote:
>
> On May 6, 2010, at 20:58, Evangeline Han wrote:
>
> > ---> Staging dbus-glib into destroot
> [snip]
> > /bin/sh: line 1: gtkdoc-rebase: command not found
>
> I just committed a fix for this, so if you wait a half hour and then "sudo
> port selfupdate" and try again, it should work.
>
> http://trac.macports.org/ticket/24658
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20100508/4e3451af/attachment.html>
More information about the macports-users
mailing list