Installing Quartz GnuCash
Kurt Hillig
khillig at umich.edu
Mon May 17 10:20:31 PDT 2010
Try the pre-built 2.2.9 version: http://sourceforge.net/projects/gnucash/
I struggled a lot with trying to build it but ultimately found it much
less painful to take advantage of someone else's sweat and tears.
Dr. Kurt Hillig
UMNet Administration I always tell the Fax (734)763-4050
University of Michigan absolute truth, Phone (734)647-8778
Ann Arbor, MI 48105-3640 as I see it. EMail khillig(at)umich.edu
> Computers were invented to help people waste more time faster <
On Mon, 17 May 2010, Glenn Hoffman wrote:
> I have been struggling thru installing the Quartz variant of GnuCash into Mac
> OS X 10.5.8 following the instructions at
> http://wiki.gnucash.org/wiki/MacOSX/MacPortsDetail#Using_MacPorts_to_install_the_native_Quartz_version_of_GnuCash
>
> I am now stuck after my latest attempt, which produced the following report.
> Where do I go from here?
>
> Pika:~ glenn$ sudo port install gnucash
> ---> Computing dependencies for gnucash
> ---> Extracting tiff
> ---> Applying patches to tiff
> ---> Configuring tiff
> ---> Building tiff
> ---> Staging tiff into destroot
> ---> Installing tiff @3.9.2_3+macosx
> ---> Activating tiff @3.9.2_3+macosx
> ---> Cleaning tiff
> ---> Fetching gtk2
> ---> Attempting to fetch gtk+-2.18.8.tar.bz2 from
> ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/gtk+/2.18/
> ---> Verifying checksum(s) for gtk2
> ---> Extracting gtk2
> ---> Applying patches to gtk2
> ---> Configuring gtk2
> ---> Building gtk2
> ---> Staging gtk2 into destroot
> ---> Installing gtk2 @2.18.8_0+no_x11+quartz
> ---> Activating gtk2 @2.18.8_0+no_x11+quartz
> ---> Cleaning gtk2
> ---> Fetching libglade2
> ---> Attempting to fetch libglade-2.6.4.tar.bz2 from
> ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libglade/2.6/
> ---> Verifying checksum(s) for libglade2
> ---> Extracting libglade2
> ---> Configuring libglade2
> ---> Building libglade2
> ---> Staging libglade2 into destroot
> ---> Installing libglade2 @2.6.4_1
> ---> Activating libglade2 @2.6.4_1
> ---> Cleaning libglade2
> ---> Fetching opensp
> ---> Attempting to fetch OpenSP-1.5.2.tar.gz from
> http://voxel.dl.sourceforge.net/openjade
> ---> Verifying checksum(s) for opensp
> ---> Extracting opensp
> ---> Configuring opensp
> ---> Building opensp
> ---> Staging opensp into destroot
> ---> Installing opensp @1.5.2_0
> ---> Activating opensp @1.5.2_0
> ---> Cleaning opensp
> ---> Fetching libofx
> ---> Attempting to fetch libofx-0.9.1.tar.gz from
> http://voxel.dl.sourceforge.net/libofx
> ---> Verifying checksum(s) for libofx
> ---> Extracting libofx
> ---> Configuring libofx
> ---> Building libofx
> ---> Staging libofx into destroot
> ---> Installing libofx @0.9.1_0
> ---> Activating libofx @0.9.1_0
> ---> Cleaning libofx
> ---> Fetching glut
> ---> Verifying checksum(s) for glut
> ---> Extracting glut
> ---> Configuring glut
> ---> Building glut
> ---> Staging glut into destroot
> ---> Installing glut @3.7_3
> ---> Activating glut @3.7_3
> ---> Cleaning glut
> ---> Fetching makedepend
> ---> Attempting to fetch makedepend-1.0.2.tar.bz2 from
> http://www.x.org/pub/individual/util/
> ---> Verifying checksum(s) for makedepend
> ---> Extracting makedepend
> ---> Configuring makedepend
> ---> Building makedepend
> ---> Staging makedepend into destroot
> ---> Installing makedepend @1.0.2_0
> ---> Activating makedepend @1.0.2_0
> ---> Cleaning makedepend
> ---> Fetching xorg-dri2proto
> ---> Attempting to fetch dri2proto-2.3.tar.bz2 from
> http://xorg.freedesktop.org/archive/individual/proto
> ---> Verifying checksum(s) for xorg-dri2proto
> ---> Extracting xorg-dri2proto
> ---> Configuring xorg-dri2proto
> ---> Building xorg-dri2proto
> ---> Staging xorg-dri2proto into destroot
> ---> Installing xorg-dri2proto @2.3_0
> ---> Activating xorg-dri2proto @2.3_0
> ---> Cleaning xorg-dri2proto
> ---> Fetching xorg-glproto
> ---> Attempting to fetch glproto-1.4.11.tar.bz2 from
> http://xorg.freedesktop.org/archive/individual/proto/
> ---> Verifying checksum(s) for xorg-glproto
> ---> Extracting xorg-glproto
> ---> Configuring xorg-glproto
> ---> Building xorg-glproto
> ---> Staging xorg-glproto into destroot
> ---> Installing xorg-glproto @1.4.11_0
> ---> Activating xorg-glproto @1.4.11_0
> ---> Cleaning xorg-glproto
> ---> Fetching xorg-fixesproto
> ---> Attempting to fetch fixesproto-4.1.1.tar.bz2 from
> http://xorg.freedesktop.org/archive/individual/proto/
> ---> Verifying checksum(s) for xorg-fixesproto
> ---> Extracting xorg-fixesproto
> ---> Configuring xorg-fixesproto
> ---> Building xorg-fixesproto
> ---> Staging xorg-fixesproto into destroot
> ---> Installing xorg-fixesproto @4.1.1_0
> ---> Activating xorg-fixesproto @4.1.1_0
> ---> Cleaning xorg-fixesproto
> ---> Fetching xorg-libXfixes
> ---> Attempting to fetch libXfixes-4.0.4.tar.bz2 from
> http://xorg.freedesktop.org/archive/individual/lib/
> ---> Verifying checksum(s) for xorg-libXfixes
> ---> Extracting xorg-libXfixes
> ---> Configuring xorg-libXfixes
> ---> Building xorg-libXfixes
> ---> Staging xorg-libXfixes into destroot
> ---> Installing xorg-libXfixes @4.0.4_0
> ---> Activating xorg-libXfixes @4.0.4_0
> ---> Cleaning xorg-libXfixes
> ---> Fetching xorg-libXi
> ---> Attempting to fetch libXi-1.3.tar.bz2 from
> http://xorg.freedesktop.org/archive/individual/lib/
> ---> Verifying checksum(s) for xorg-libXi
> ---> Extracting xorg-libXi
> ---> Configuring xorg-libXi
> Error: Target org.macports.configure returned: configure failure: shell
> command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXi/work/libXi-1.3"
> && ./configure --prefix=/opt/local " returned error 1
> Command output: checking for objdir... .libs
> checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
> checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
> checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
> checking if /usr/bin/gcc-4.0 static flag -static works... no
> checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
> checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
> checking whether the /usr/bin/gcc-4.0 linker
> (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries...
> yes
> checking dynamic linker characteristics... darwin9.8.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for a sed that does not truncate output... (cached) /usr/bin/sed
> checking for /usr/bin/gcc-4.0 option to accept ISO C99... -std=gnu99
> checking for pkg-config... /opt/local/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for XI... configure: error: Package requirements (xproto >= 7.0.13
> x11 >= 1.2.99.1 xextproto >= 7.0.3 xext >= 1.0.99.1 inputproto >= 1.9.99.902)
> were not met:
>
> Requested 'x11 >= 1.2.99.1' but version of X11 is 1.2.2
> Requested 'inputproto >= 1.9.99.902' but version of InputProto is 1.5.1
>
> Consider adjusting the PKG_CONFIG_PATH environment variable if you
> installed software in a non-standard prefix.
>
> Alternatively, you may set the environment variables XI_CFLAGS
> and XI_LIBS to avoid the need to call pkg-config.
> See the pkg-config man page for more details.
>
>
> Error: The following dependencies failed to build: aqbanking qt3 mesa
> xorg-libXi xorg-libXmu xorg-libXt xorg-libsm xorg-libice xorg-libXcursor
> xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto gconf
> dbus-glib dbus orbit2 libidl policykit goffice libart_lgpl libgsf gnome-vfs
> desktop-file-utils gnome-mime-data libbonobo guile16 libgnomeprintui
> gnome-icon-theme hicolor-icon-theme icon-naming-utils p5-xml-simple
> p5-xml-namespacesupport p5-xml-sax libgnomecanvas libgnomeprint bison
> libgnomecups libgnomeui gnome-keyring libbonoboui libgnome esound audiofile
> libgtkhtml3 enchant aspell texinfo lzmautils hunspell libsoup libproxy cmake
> libidn p5-finance-quote p5-crypt-ssleay p5-datemanip p5-html-tableextract
> p5-html-tree p5-html-parser p5-html-tagset p5-libwww-perl
> p5-compress-raw-zlib p5-io-compress p5-compress-raw-bzip2 p5-uri slib
> slib-guile16
> Error: Status 1 encountered during processing.
> Before reporting a bug, first run the command again with the -d flag to get
> complete output.
>
> ========= Other Information ============
>
> Pika:~ glenn$ port installed
> The following ports are currently installed:
> atk @1.30.0_0 (active)
> autoconf @2.64_0
> autoconf @2.65_1 (active)
> automake @1.11_0
> automake @1.11.1_0 (active)
> bzip2 @1.0.5_2 (active)
> cairo @1.8.10_0+macosx+no_x11+quartz (active)
> curl @7.19.5_0 (active)
> db46 @4.6.21_5 (active)
> docbook-xml @5.0_0 (active)
> docbook-xml-4.1.2 @4.1.2_1 (active)
> docbook-xml-4.2 @4.2_0 (active)
> docbook-xml-4.3 @4.3_0 (active)
> docbook-xml-4.4 @4.4_0 (active)
> docbook-xml-4.5 @4.5_0 (active)
> docbook-xml-5.0 @5.0_0 (active)
> docbook-xsl @1.75.2_0 (active)
> expat @2.0.1_0 (active)
> fontconfig @2.7.1_0+macosx (active)
> freetype @2.3.9_0+macosx (active)
> gdbm @1.8.3_1 (active)
> getopt @1.1.4_1 (active)
> gettext @0.17_4
> gettext @0.18_0 (active)
> git-core @1.6.3.1_0+doc (active)
> glib2 @2.24.1_0+darwin (active)
> glut @3.7_3 (active)
> gmp @5.0.1_0 (active)
> gnome-common @2.26.0_0 (active)
> gnome-doc-utils @0.18.1_1 (active)
> gnutls @2.8.6_0 (active)
> gperf @3.0.4_0 (active)
> gtk-doc @1.14_0 (active)
> gtk2 @2.18.8_0+no_x11+quartz (active)
> gwenhywfar @3.11.3_0 (active)
> help2man @1.36.4_1
> help2man @1.37.1_1 (active)
> intltool @0.40.6_0 (active)
> iso-codes @3.16_0 (active)
> jasper @1.900.1_7 (active)
> jpeg @8a_0 (active)
> ktoblzcheck @1.26_0 (active)
> libgcrypt @1.4.5_0 (active)
> libglade2 @2.6.4_1 (active)
> libgpg-error @1.7_0 (active)
> libiconv @1.12_2
> libiconv @1.13.1_0 (active)
> libofx @0.9.1_0 (active)
> libpixman @0.18.2_0 (active)
> libpng @1.2.43_0 (active)
> libtasn1 @2.2_0 (active)
> libtool @2.2.6a_0
> libtool @2.2.6b_1+darwin (active)
> libxml2 @2.7.7_0 (active)
> libxslt @1.1.26_0 (active)
> lzo @1.08_0 (active)
> m4 @1.4.13_0
> m4 @1.4.14_0 (active)
> makedepend @1.0.2_0 (active)
> ncurses @5.7_0 (active)
> ncursesw @5.7_0 (active)
> opencdk @0.6.6_0 (active)
> opensp @1.5.2_0 (active)
> openssl @0.9.8k_0 (active)
> p5-error @0.17015_0 (active)
> p5-getopt-long @2.38_0 (active)
> p5-locale-gettext @1.05_0
> p5-locale-gettext @1.05_2 (active)
> p5-pathtools @3.31_0 (active)
> p5-scalar-list-utils @1.23_0 (active)
> p5-xml-parser @2.36_0 (active)
> pango @1.24.5_0+macosx+no_x11+quartz (active)
> perl5 @5.8.9_0 (active)
> perl5.8 @5.8.9_3 (active)
> pkgconfig @0.23_1 (active)
> popt @1.15_0 (active)
> py25-clientform @0.2.9_0 (active)
> py25-mechanize @0.1.9_0 (active)
> py25-openssl @0.7_0 (active)
> py25-setuptools @0.6c9_0 (active)
> py26-clientform @0.2.9_0
> py26-libxml2 @2.6.21_0 (active)
> py26-mechanize @0.1.9_0
> python25 @2.5.4_6+darwin_9+macosx (active)
> python26 @2.6.2_3
> python26 @2.6.5_0+darwin (active)
> python_select @0.2.1_0+darwin_9
> python_select @0.3_0+darwin_9 (active)
> rarian @0.8.1_0 (active)
> readline @6.0.000_1 (active)
> rsync @3.0.6_0 (active)
> shared-mime-info @0.71_0 (active)
> sqlite3 @3.6.17_0 (active)
> tcl @8.5.6_0 (active)
> tiff @3.9.2_3+macosx (active)
> tk @8.5.6_1 (active)
> Xft2 @2.1.13_2 (active)
> xmlcatmgr @2.2_1 (active)
> xorg-bigreqsproto @1.0.2_0 (active)
> xorg-dri2proto @2.3_0 (active)
> xorg-fixesproto @4.1.1_0 (active)
> xorg-glproto @1.4.11_0 (active)
> xorg-inputproto @1.5.1_0 (active)
> xorg-kbproto @1.0.3_0 (active)
> xorg-libX11 @1.2.2_0 (active)
> xorg-libXau @1.0.4_1 (active)
> xorg-libXdmcp @1.0.2_1 (active)
> xorg-libXext @1.0.99.4_1 (active)
> xorg-libXfixes @4.0.4_0 (active)
> xorg-libXScrnSaver @1.1.3_1 (active)
> xorg-renderproto @0.11_0 (active)
> xorg-scrnsaverproto @1.1.0_0 (active)
> xorg-util-macros @1.2.2_0 (active)
> xorg-xcmiscproto @1.1.2_0 (active)
> xorg-xextproto @7.1.0_0 (active)
> xorg-xf86bigfontproto @1.1.2_0 (active)
> xorg-xproto @7.0.15_0 (active)
> xorg-xtrans @1.2.4_0 (active)
> xrender @0.9.4_6 (active)
> zlib @1.2.3_2 (active)
>
> Thanks you for any help.
>
> Glenn
> _______________________________________________
> macports-users mailing list
> macports-users at lists.macosforge.org
> http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
>
> !DSPAM:4bf178e579591385515324!
>
>
>
More information about the macports-users
mailing list