installing ImageMagick
Nathan Derstine
nater06 at gmail.com
Tue Apr 19 16:40:30 PDT 2011
Ok I cleaned and installed and it didn't work. Here's the complete
main.log.
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main p7zip 9.20.1_0 exists in the ports tree
:debug:main p7zip 9.20.1_0 is the latest installed
:debug:main p7zip 9.20.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/archivers/p7zip
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! p7zip 9.20.1_0 >= p7zip 9.20.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.25_2 exists in the ports tree
:debug:main pkgconfig 0.25_2 is the latest installed
:debug:main pkgconfig 0.25_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/devel/pkgconfig
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! pkgconfig 0.25_2 >= pkgconfig 0.25_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.2.0_0 exists in the ports tree
:debug:main xorg-libXext 1.2.0_0 is the latest installed
:debug:main xorg-libXext 1.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libXext
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXext 1.2.0_0 >= xorg-libXext
1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.4.3_0 exists in the ports tree
:debug:main xorg-libX11 1.4.3_0 is the latest installed
:debug:main xorg-libX11 1.4.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libX11
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! xorg-libX11 1.4.3_0 >= xorg-libX11
1.4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.0_0 is the latest installed
:debug:main xorg-libXdmcp 1.1.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp
1.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.6_0 exists in the ports tree
:debug:main xorg-libXau 1.0.6_0 is the latest installed
:debug:main xorg-libXau 1.0.6_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libXau
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau
1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.21_0 exists in the ports tree
:debug:main xorg-xproto 7.0.21_0 is the latest installed
:debug:main xorg-xproto 7.0.21_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-xproto
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default
universal variant
:debug:main No need to upgrade! xorg-xproto 7.0.21_0 >= xorg-xproto
7.0.21_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.7_0 exists in the ports tree
:debug:main xorg-libxcb 1.7_0 +python27 is the latest installed
:debug:main xorg-libxcb 1.7_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libxcb
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed
:debug:main xorg-xcb-proto 1.6_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default
universal variant
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto
1.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0 is the latest installed
:debug:main libxml2 2.7.8_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0 is the latest installed
:debug:main libiconv 1.13.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 is the latest installed
:debug:main zlib 1.2.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.1_1 exists in the ports tree
:debug:main python27 2.7.1_1 is the latest installed
:debug:main python27 2.7.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/lang/python27
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! python27 2.7.1_1 >= python27 2.7.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 is the latest installed
:debug:main gettext 0.18.1.1_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_0 exists in the ports tree
:debug:main ncurses 5.9_0 is the latest installed
:debug:main ncurses 5.9_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 is the latest installed
:debug:main expat 2.0.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0d_0 exists in the ports tree
:debug:main openssl 1.0.0d_0 is the latest installed
:debug:main openssl 1.0.0d_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.6_0 exists in the ports tree
:debug:main sqlite3 3.7.6_0 is the latest installed
:debug:main sqlite3 3.7.6_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0 is the latest installed
:debug:main readline 6.2.000_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 is the latest installed
:debug:main db46 4.6.21_6 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3 is the latest installed
:debug:main gdbm 1.8.3_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 is the latest installed
:debug:main bzip2 1.0.6_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0 is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default
universal variant
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.5_0 is the latest installed
:debug:main xorg-kbproto 1.0.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-kbproto
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default
universal variant
:debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
1.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.2.0_0 exists in the ports tree
:debug:main xorg-xextproto 7.2.0_0 is the latest installed
:debug:main xorg-xextproto 7.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-xextproto
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default
universal variant
:debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-
xextproto 7.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXt 1.1.1_0 exists in the ports tree
:debug:main xorg-libXt 1.1.1_0 is the latest installed
:debug:main xorg-libXt 1.1.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libXt
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXt 1.1.1_0 >= xorg-libXt 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libsm 1.2.0_0 exists in the ports tree
:debug:main xorg-libsm 1.2.0_0 is the latest installed
:debug:main xorg-libsm 1.2.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libsm
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libice 1.0.7_0 exists in the ports tree
:debug:main xorg-libice 1.0.7_0 is the latest installed
:debug:main xorg-libice 1.0.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/xorg-libice
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice
1.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8c_0 exists in the ports tree
:debug:main jpeg 8c_0 is the latest installed
:debug:main jpeg 8c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/graphics/jpeg
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms 1.19_2 exists in the ports tree
:debug:main lcms 1.19_2 is the latest installed
:debug:main lcms 1.19_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/graphics/lcms
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.4_0 exists in the ports tree
:debug:main tiff 3.9.4_0 is the latest installed
:debug:main tiff 3.9.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/graphics/tiff
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.4.5_0 exists in the ports tree
:debug:main libpng 1.4.5_0 is the latest installed
:debug:main libpng 1.4.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/graphics/libpng
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! libpng 1.4.5_0 >= libpng 1.4.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main freetype 2.4.4_0 exists in the ports tree
:debug:main freetype 2.4.4_0 is the latest installed
:debug:main freetype 2.4.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/print/freetype
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main fontconfig 2.8.0_0 exists in the ports tree
:debug:main fontconfig 2.8.0_0 is the latest installed
:debug:main fontconfig 2.8.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/graphics/fontconfig
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ghostscript 9.02_0 exists in the ports tree
:debug:main ghostscript 9.02_0 is the latest installed
:debug:main ghostscript 9.02_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/print/ghostscript
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/
muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main universal variant already exists, so not adding the
default one
:debug:main No need to upgrade! ghostscript 9.02_0 >= ghostscript 9.02_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.20_0 exists in the ports tree
:debug:main libidn 1.20_0 is the latest installed
:debug:main libidn 1.20_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/mail/libidn
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! libidn 1.20_0 >= libidn 1.20_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpaper 1.1.24_0 exists in the ports tree
:debug:main libpaper 1.1.24_0 is the latest installed
:debug:main libpaper 1.1.24_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/print/libpaper
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! libpaper 1.1.24_0 >= libpaper 1.1.24_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/lang/perl5
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_1 exists in the ports tree
:debug:main perl5.12 5.12.3_1 is the latest installed
:debug:main perl5.12 5.12.3_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/lang/perl5.12
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/
sources/rsync.macports.org/release/ports/_resources/port1.0/
variant_descriptions.conf
:debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main urw-fonts 1.0.7pre44_0 exists in the ports tree
:debug:main urw-fonts 1.0.7pre44_0 is the latest installed
:debug:main urw-fonts 1.0.7pre44_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/
sources/rsync.macports.org/release/ports/x11/urw-fonts
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
:debug:main org.macports.load registered provides 'load', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts
1.0.7pre44_0
:msg:main ---> Computing dependencies for
ImageMagick:info:main .:debug:main Checking for conflicts against
ImageMagick
:debug:main Searching for dependency: cryptlib
:debug:main Didn't find receipt, going to depspec regex for: cryptlib
:debug:main Searching for dependency: p7zip
:debug:main Found Dependency: receipt exists for p7zip
:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: xorg-libXext
:debug:main Found Dependency: receipt exists for xorg-libXext
:debug:main Searching for dependency: xorg-libXt
:debug:main Found Dependency: receipt exists for xorg-libXt
:debug:main Searching for dependency: bzip2
:debug:main Found Dependency: receipt exists for bzip2
:debug:main Searching for dependency: jpeg
:debug:main Found Dependency: receipt exists for jpeg
:debug:main Searching for dependency: lcms
:debug:main Found Dependency: receipt exists for lcms
:debug:main Searching for dependency: libpng
:debug:main Found Dependency: receipt exists for libpng
:debug:main Searching for dependency: tiff
:debug:main Found Dependency: receipt exists for tiff
:debug:main Searching for dependency: zlib
:debug:main Found Dependency: receipt exists for zlib
:debug:main Searching for dependency: freetype
:debug:main Found Dependency: receipt exists for freetype
:debug:main Searching for dependency: fontconfig
:debug:main Found Dependency: receipt exists for fontconfig
:debug:main Searching for dependency: ghostscript
:debug:main Found Dependency: receipt exists for ghostscript
:debug:main Searching for dependency: libiconv
:debug:main Found Dependency: receipt exists for libiconv
:debug:main Searching for dependency: expat
:debug:main Found Dependency: receipt exists for expat
:debug:main Searching for dependency: libxml2
:debug:main Found Dependency: receipt exists for libxml2
:debug:main Searching for dependency: urw-fonts
:debug:main Found Dependency: receipt exists for urw-fonts
:msg:main
:debug:main Executing org.macports.main (ImageMagick)
:msg:main ---> Fetching ImageMagick
:debug:fetch fetch phase started at Tue Apr 19 13:35:53 HST 2011
:debug:fetch Executing org.macports.fetch (ImageMagick)
:info:fetch ---> ImageMagick-6.6.9-1.7z doesn't seem to exist in /opt/
local/var/macports/distfiles/ImageMagick
:debug:fetch Pinging image_magick.veidrodis.com...
:debug:fetch Pinging imagemagick.linux-mirror.org...
:debug:fetch Pinging ftp.imagemagick.org...
:debug:fetch Pinging ftp.fifi.org...
:debug:fetch Pinging distfiles.macports.org...
:debug:fetch Pinging aarnet.au.distfiles.macports.org...
:debug:fetch Pinging cjj.kr.distfiles.macports.org...
:debug:fetch Pinging lil.fr.distfiles.macports.org...
:debug:fetch Pinging sea.us.distfiles.macports.org...
:debug:fetch Pinging ykf.ca.distfiles.macports.org...
:debug:fetch image_magick.veidrodis.com ping time is 10000
:debug:fetch imagemagick.linux-mirror.org ping time is 10000
:debug:fetch ftp.imagemagick.org ping time is 10000
:debug:fetch ftp.fifi.org ping time is 10000
:debug:fetch distfiles.macports.org ping time is 10000
:debug:fetch aarnet.au.distfiles.macports.org ping time is 10000
:debug:fetch cjj.kr.distfiles.macports.org ping time is 10000
:debug:fetch lil.fr.distfiles.macports.org ping time is 10000
:debug:fetch sea.us.distfiles.macports.org ping time is 10000
:debug:fetch ykf.ca.distfiles.macports.org ping time is 10000
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://image_magick.veidrodis.com/image_magick/
:debug:fetch Fetching failed:: Couldn't resolve host
'image_magick.veidrodis.com'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://imagemagick.linux-mirror.org/download/
:debug:fetch Fetching failed:: Couldn't resolve host
'imagemagick.linux-mirror.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from ftp://ftp.imagemagick.org/pub/ImageMagick/
:debug:fetch Fetching failed:: Couldn't resolve host 'ftp.imagemagick.org
'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from ftp://ftp.fifi.org/pub/ImageMagick/
:debug:fetch Fetching failed:: Couldn't resolve host 'ftp.fifi.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://distfiles.macports.org/ImageMagick
:debug:fetch Fetching failed:: Couldn't resolve host
'distfiles.macports.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/ImageMagick
:debug:fetch Fetching failed:: Couldn't resolve host
'aarnet.au.distfiles.macports.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://cjj.kr.distfiles.macports.org/ImageMagick
:debug:fetch Fetching failed:: Couldn't resolve host
'cjj.kr.distfiles.macports.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://lil.fr.distfiles.macports.org/ImageMagick
:debug:fetch Fetching failed:: Couldn't resolve host
'lil.fr.distfiles.macports.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://sea.us.distfiles.macports.org/macports/mpdistfiles/ImageMagick
:debug:fetch Fetching failed:: Couldn't resolve host
'sea.us.distfiles.macports.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/ImageMagick
:debug:fetch Fetching failed:: Couldn't resolve host
'ykf.ca.distfiles.macports.org'
:msg:fetch ---> Attempting to fetch ImageMagick-6.6.9-1.7z from http://svn.macports.org/repository/macports/distfiles/ImageMagick
:debug:fetch Fetching failed:: Couldn't resolve host 'svn.macports.org'
:error:fetch Target org.macports.fetch returned: fetch failed
:debug:fetch Backtrace: fetch failed
while executing
"portfetch::fetchfiles"
("standard" arm line 1)
invoked from within
"switch -- "${fetch.type}" {
bzr { return [bzrfetch] }
cvs { return [cvsfetch] }
svn { return [svnfetch] }
..."
(procedure "portfetch::fetch_main" line 10)
invoked from within
"$procedure $targetname"
:info:fetch Warning: the following items did not execute (for
ImageMagick): org.macports.activate org.macports.fetch
org.macports.checksum org.macports.extract org.macports.patch
org.macports.configure org.macports.build org.macports.destroot
org.macports.install
:notice:fetch Log for ImageMagick is at: /opt/local/var/macports/logs/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_graphics_ImageMagick/main.log
On Apr 19, 2011, at 12:26 PM, Ryan Schmidt wrote:
> On Apr 19, 2011, at 12:19, Nathan Derstine wrote:
>
>> Thanks for advice. I went with the sync option, and this is what I
>> got:
>>
>> Derstine$ sudo port sync
>> Password:
>> ~ Derstine$ sudo port install ImageMagick
>> ---> Computing dependencies for ImageMagick
>> ---> Building ImageMagick
>> Error: Target org.macports.build returned: shell command failed
>> (see log for details)
>> Log for ImageMagick is at: /opt/local/var/macports/logs/
>> _opt_local_var_macports_sources_rsync
>> .macports.org_release_ports_graphics_ImageMagick/main.log
>> Error: Status 1 encountered during processing.
>>
>> The last portion of the log file says:
>>
>> :msg:main ---> Building ImageMagick
>> :debug:build build phase started at Tue Apr 19 07:13:02 HST 2011
>> :debug:build Executing org.macports.build (ImageMagick)
>> :debug:build Environment: CPATH='/opt/local/include'
>> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/
>> _opt_local_var_macports_sources_rsync
>> .macports.org_release_ports_graphics_ImageMagick/
>> work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib'
>> CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
>> :debug:build Assembled command: 'cd "/opt/local/var/macports/build/
>> _opt_local_var_macports_sources_rsync
>> .macports.org_release_ports_graphics_ImageMagick/work/
>> ImageMagick-6.6.9-1" && /usr/bin/make -j2 all'
>> :info:build sh: line 0: cd: /opt/local/var/macports/build/
>> _opt_local_var_macports_sources_rsync
>> .macports.org_release_ports_graphics_ImageMagick/work/
>> ImageMagick-6.6.9-1: No such file or directory
>> :info:build shell command " cd "/opt/local/var/macports/build/
>> _opt_local_var_macports_sources_rsync
>> .macports.org_release_ports_graphics_ImageMagick/work/
>> ImageMagick-6.6.9-1" && /usr/bin/make -j2 all " returned error 1
>> :error:build Target org.macports.build returned: shell command
>> failed (see log for details)
>> :debug:build Backtrace: shell command failed (see log for details)
>> while executing
>> "command_exec build"
>> (procedure "portbuild::build_main" line 8)
>> invoked from within
>> "$procedure $targetname"
>> :info:build Warning: the following items did not execute (for
>> ImageMagick): org.macports.activate org.macports.build
>> org.macports.destroot org.macports.install
>> :notice:build Log for ImageMagick is at: /opt/local/var/macports/
>> logs/
>> _opt_local_var_macports_sources_rsync
>> .macports.org_release_ports_graphics_ImageMagick/main.log
>>
>> What now? Is uninstalling it all and starting over an easier option?
>
> Looks like the ImageMagick source directory doesn't exist (you
> probably deleted it in your cleanup efforts), but MacPorts is
> starting here from the Build phase, meaning it thinks it's already
> completed the earlier phases Fetch, Extract (during which the source
> directory would have been created), Patch, Configure. So you just
> need to clean the port and try again.
>
> sudo port clean ImageMagick
> sudo port install ImageMagick
>
> If it fails again, please send the complete main.log.
>
> P.S: Cleaning and trying again should be the first thing you try
> anytime something fails in MacPorts.
>
> P.P.S: Use Reply All so the discussion stays on the mailing list so
> others can follow it and participate.
>
>
More information about the macports-users
mailing list