Can't install clisp (common lisp)
Yves S. Garret
yoursurrogategod at gmail.com
Wed Sep 7 03:40:55 PDT 2011
Gotcha. I re-ran the sudo port upgrade outdated and it said that no ports
match that expression.
Now, when I run the install clisp command, this is what I get.
% sudo port -d install clisp docbook-xml docbook-xsl docbook-dsssl gnuradio
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/lang/clisp
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Starting logging for clisp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.2.000_0 exists in the ports tree
DEBUG: readline 6.2.000_0 +universal is the latest installed
DEBUG: readline 6.2.000_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/readline
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.9_1 exists in the ports tree
DEBUG: ncurses 5.9_1 +universal is the latest installed
DEBUG: ncurses 5.9_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2 +universal is the latest installed
DEBUG: gettext 0.18.1.1_2 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.14_0 exists in the ports tree
DEBUG: libiconv 1.14_0 +universal is the latest installed
DEBUG: libiconv 1.14_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_1 exists in the ports tree
DEBUG: expat 2.0.1_1 +universal is the latest installed
DEBUG: expat 2.0.1_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libsigsegv 2.9_0 exists in the ports tree
DEBUG: libsigsegv 2.9_0 +universal is the latest installed
DEBUG: libsigsegv 2.9_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/libsigsegv
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libsigsegv 2.9_0 >= libsigsegv 2.9_0
---> Computing dependencies for clisp
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: libsigsegv
DEBUG: Found Dependency: receipt exists for libsigsegv
DEBUG: Executing org.macports.main (clisp)
DEBUG: Skipping completed org.macports.archivefetch (clisp)
DEBUG: Skipping completed org.macports.fetch (clisp)
DEBUG: Skipping completed org.macports.checksum (clisp)
DEBUG: Skipping completed org.macports.extract (clisp)
DEBUG: Skipping completed org.macports.patch (clisp)
DEBUG: Skipping completed org.macports.configure (clisp)
DEBUG: build phase started at Wed Sep 7 06:38:31 EDT 2011
---> Building clisp
DEBUG: Executing org.macports.build (clisp)
DEBUG: EXECUTING: cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_clisp/clisp/work/clisp-2.49/src
&& ulimit -s 16384 && unset LD_PREBIND LD_PREBIND_ALLOW_OVERLAP && make
mkdir -p gllib
test -f gllib/Makefile || sh config.status gllib/Makefile depfiles
cd gllib && make CFLAGS="-W -Wswitch -Wcomment -Wpointer-arith -Wimplicit
-Wreturn-type -Wmissing-declarations -Wno-sign-compare
-Wno-format-nonliteral -O2 -fexpensive-optimizations -falign-functions=4
-DUNIX_BINARY_DISTRIB -DENABLE_UNICODE -DDYNAMIC_MODULES -I. -fPIC"
CLISP_LIBDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_clisp/clisp/work/clisp-2.49/src
cd .. && make am--refresh
make[2]: Nothing to be done for `am--refresh'.
make[2]: Nothing to be done for `am--refresh'.
make all-recursive
cd .. && make am--refresh
make[3]: Nothing to be done for `am--refresh'.
make[3]: Nothing to be done for `am--refresh'.
cd .. && make am--refresh
make[4]: Nothing to be done for `am--refresh'.
make[4]: Nothing to be done for `am--refresh'.
make[3]: Nothing to be done for `all-am'.
test -r libgnu_cl.a || ln -s gllib/libgnu.a libgnu_cl.a
/Developer/usr/bin/llvm-gcc-4.2 -arch i386 -I/opt/local/include
-I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_clisp/clisp/work/clisp-2.49/src/gllib
-W -Wswitch -Wcomment -Wpointer-arith -Wimplicit -Wreturn-type
-Wmissing-declarations -Wno-sign-compare -Wno-format-nonliteral -O2
-fexpensive-optimizations -falign-functions=4 -DUNIX_BINARY_DISTRIB
-DENABLE_UNICODE -DDYNAMIC_MODULES -I. -c modules.c
modules.c:16: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘module_count’
modules.c:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘subr_tab_data_size’
modules.c:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘object_tab_size’
modules.c:44: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘modules’
make: *** [modules.o] Error 1
shell command "cd
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_clisp/clisp/work/clisp-2.49/src
&& ulimit -s 16384 && unset LD_PREBIND LD_PREBIND_ALLOW_OVERLAP && make"
returned error 2
Error: Target org.macports.build returned: shell command failed (see log for
details)
DEBUG: Backtrace: shell command failed (see log for details)
while executing
"$procedure $targetname"
Warning: the following items did not execute (for clisp):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Log for clisp is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_clisp/clisp/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
On Mon, Sep 5, 2011 at 3:58 PM, Ryan Schmidt <ryandesign at macports.org>wrote:
> On Sep 5, 2011, at 06:42, Yves S. Garret wrote:
>
> > Thanks for your reply. I already did update Xcode (not because of this
> though.) Here is what happened when I tried to upgrade the outdated.
> >
> > % sudo port -d upgrade outdated
> [snip]
> > ---> Activating perl5 @5.12.3_1+perl5_12
> [snip]
> > Error: Target org.macports.activate returned: Image error:
> /opt/local/bin/a2p is being used by the active perl5.8 port. Please
> deactivate this port first, or use 'port -f activate perl5' to force the
> activation.
>
> To avoid this problem, upgrade perl5.8 before upgrading perl5.12.
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20110907/84e9b7c1/attachment.html>
More information about the macports-users
mailing list