What is db46 and why is it such a pain?

[Yves S. Garret]

I tried installing gedit and this is the issue that I encountered:

Error: Checksum (md5) mismatch for patch.4.6.21.1
Error: Checksum (sha1) mismatch for patch.4.6.21.1
Error: Checksum (rmd160) mismatch for patch.4.6.21.1
Error: Checksum (md5) mismatch for patch.4.6.21.2
Error: Checksum (sha1) mismatch for patch.4.6.21.2
Error: Checksum (rmd160) mismatch for patch.4.6.21.2
Error: Checksum (md5) mismatch for patch.4.6.21.3
Error: Checksum (sha1) mismatch for patch.4.6.21.3
Error: Checksum (rmd160) mismatch for patch.4.6.21.3
Error: Checksum (md5) mismatch for patch.4.6.21.4
Error: Checksum (sha1) mismatch for patch.4.6.21.4
Error: Checksum (rmd160) mismatch for patch.4.6.21.4
***
The non-matching file appears to be HTML. See this page for possible reasons
for the checksum mismatch:
<https://trac.macports.org/wiki/MisbehavingServers>
***
Error: Target org.macports.checksum returned: Unable to verify file
checksums
Error: Failed to install db46
Log for db46 is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_db46/db46/main.log
Error: The following dependencies were not installed: gconf dbus-glib
gtk-doc gnome-doc-utils py27-libxml2 python27 db46 openssl python_select
sqlite3 python27 rarian getopt gnome-doc-utils gtk2 atk gdk-pixbuf2 jasper
jpeg libpng tiff pango Xft2 fontconfig freetype xrender xorg-libX11
xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto
xorg-libXdmcp xorg-libxcb xorg-libpthread-stubs xorg-xcb-proto
xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto
xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb-util shared-mime-info
xorg-libXcomposite xorg-compositeproto xorg-libXext xorg-libXfixes
xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi
xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2
libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject
libffi py27-gtk libglade2 py27-cairo py27-numpy py27-nose py27-distribute
py27-py xorg-libsm xorg-libice
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

I don't get it... why is there a checksum mismatch?

I then did the same thing with the -d flag:

% sudo port -d install gedit gedit-plugins
Password:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/gedit
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Executing variant python27 provides python27
DEBUG: Starting logging for gedit
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: intltool 0.40.6_1 exists in the ports tree
DEBUG: intltool 0.40.6_1  is the latest installed
DEBUG: intltool 0.40.6_1  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/intltool
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: No need to upgrade! intltool 0.40.6_1 >= intltool 0.40.6_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_1 exists in the ports tree
DEBUG: expat 2.0.1_1 +universal is the latest installed
DEBUG: expat 2.0.1_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.12 5.12.3_2 exists in the ports tree
DEBUG: perl5.12 5.12.3_2  is the latest installed
DEBUG: perl5.12 5.12.3_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/lang/perl5.12
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.9.1_0 exists in the ports tree
DEBUG: gdbm 1.9.1_0  is the latest installed
DEBUG: gdbm 1.9.1_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/databases/gdbm
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-xml-parser 2.400.0_2 exists in the ports tree
DEBUG: p5.12-xml-parser 2.400.0_2  is the latest installed
DEBUG: p5.12-xml-parser 2.400.0_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/perl/p5-xml-parser
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! p5.12-xml-parser 2.400.0_2 >= p5.12-xml-parser
2.400.0_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-getopt-long 2.380.0_2 exists in the ports tree
DEBUG: p5.12-getopt-long 2.380.0_2  is the latest installed
DEBUG: p5.12-getopt-long 2.380.0_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/perl/p5-getopt-long
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: No need to upgrade! p5.12-getopt-long 2.380.0_2 >= p5.12-getopt-long
2.380.0_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-pathtools 3.330.0_2 exists in the ports tree
DEBUG: p5.12-pathtools 3.330.0_2  is the latest installed
DEBUG: p5.12-pathtools 3.330.0_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/perl/p5-pathtools
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! p5.12-pathtools 3.330.0_2 >= p5.12-pathtools
3.330.0_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-scalar-list-utils 1.230.0_2 exists in the ports tree
DEBUG: p5.12-scalar-list-utils 1.230.0_2  is the latest installed
DEBUG: p5.12-scalar-list-utils 1.230.0_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/perl/p5-scalar-list-utils
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! p5.12-scalar-list-utils 1.230.0_2 >=
p5.12-scalar-list-utils 1.230.0_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.26_0 exists in the ports tree
DEBUG: pkgconfig 0.26_0  is the latest installed
DEBUG: pkgconfig 0.26_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.28.8_0 exists in the ports tree
DEBUG: glib2 2.28.8_0  is the latest installed
DEBUG: glib2 2.28.8_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/glib2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2 +universal is the latest installed
DEBUG: gettext 0.18.1.1_2 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.14_0 exists in the ports tree
DEBUG: libiconv 1.14_0 +universal is the latest installed
DEBUG: libiconv 1.14_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.9_1 exists in the ports tree
DEBUG: ncurses 5.9_1 +universal is the latest installed
DEBUG: ncurses 5.9_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0  is the latest installed
DEBUG: zlib 1.2.5_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.12.3_1 exists in the ports tree
DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
DEBUG: perl5 5.12.3_1 +perl5_12 is active
DEBUG: Merging existing variants '+perl5_12' into variants
DEBUG: new fully merged portvariants: perl5_12 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/lang/perl5
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Executing variant perl5_12 provides perl5_12
DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: iso-codes 3.27.1_0 exists in the ports tree
DEBUG: iso-codes 3.27.1_0  is the latest installed
DEBUG: iso-codes 3.27.1_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/iso-codes
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: No need to upgrade! iso-codes 3.27.1_0 >= iso-codes 3.27.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: enchant 1.6.0_1 exists in the ports tree
DEBUG: enchant 1.6.0_1  is the latest installed
DEBUG: enchant 1.6.0_1  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/enchant
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! enchant 1.6.0_1 >= enchant 1.6.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: aspell 0.60.6_4 exists in the ports tree
DEBUG: aspell 0.60.6_4 +nonls is the latest installed
DEBUG: aspell 0.60.6_4 +nonls is active
DEBUG: Merging existing variants '+nonls' into variants
DEBUG: new fully merged portvariants: nonls +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/aspell
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Executing variant nonls provides nonls
DEBUG: No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: texinfo 4.13_2 exists in the ports tree
DEBUG: texinfo 4.13_2  is the latest installed
DEBUG: texinfo 4.13_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/texinfo
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hunspell 1.3.2_0 exists in the ports tree
DEBUG: hunspell 1.3.2_0  is the latest installed
DEBUG: hunspell 1.3.2_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/hunspell
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! hunspell 1.3.2_0 >= hunspell 1.3.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.2.000_0 exists in the ports tree
DEBUG: readline 6.2.000_0 +universal is the latest installed
DEBUG: readline 6.2.000_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/readline
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
--->  Computing dependencies for gedit
DEBUG: Searching for dependency: gtk-doc
DEBUG: Didn't find receipt, going to depspec regex for: gtk-doc
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/gtk-doc
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Executing variant python27 provides python27
DEBUG: Searching for dependency: intltool
DEBUG: Found Dependency: receipt exists for intltool
DEBUG: Searching for dependency: gnome-doc-utils
DEBUG: Didn't find receipt, going to depspec regex for: gnome-doc-utils
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/gnome-doc-utils
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Executing variant python27 provides python27
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: gconf
DEBUG: Didn't find receipt, going to depspec regex for: gconf
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/gconf
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: iso-codes
DEBUG: Found Dependency: receipt exists for iso-codes
DEBUG: Searching for dependency: enchant
DEBUG: Found Dependency: receipt exists for enchant
DEBUG: Searching for dependency: xorg-libsm
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libsm
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: py27-pygtksourceview
DEBUG: Didn't find receipt, going to depspec regex for: py27-pygtksourceview
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py27-pygtksourceview
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: gnome-doc-utils
DEBUG: Didn't find receipt, going to depspec regex for: gnome-doc-utils
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/gnome-doc-utils
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Executing variant python27 provides python27
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Searching for dependency: rarian
DEBUG: Didn't find receipt, going to depspec regex for: rarian
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/textproc/rarian
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: libxml2
DEBUG: Found Dependency: receipt exists for libxml2
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: docbook-xml
DEBUG: Found Dependency: receipt exists for docbook-xml
DEBUG: Searching for dependency: docbook-xsl
DEBUG: Found Dependency: receipt exists for docbook-xsl
DEBUG: Searching for dependency: python27
DEBUG: Didn't find receipt, going to depspec regex for: python27
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/lang/python27
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: py27-libxml2
DEBUG: Didn't find receipt, going to depspec regex for: py27-libxml2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py27-libxml2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: intltool
DEBUG: Found Dependency: receipt exists for intltool
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: libxslt
DEBUG: Found Dependency: receipt exists for libxslt
DEBUG: Searching for dependency: iso-codes
DEBUG: Found Dependency: receipt exists for iso-codes
DEBUG: Searching for dependency: getopt
DEBUG: Didn't find receipt, going to depspec regex for: getopt
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/sysutils/getopt
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: libxslt
DEBUG: Found Dependency: receipt exists for libxslt
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: openssl
DEBUG: Didn't find receipt, going to depspec regex for: openssl
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/openssl
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: sqlite3
DEBUG: Didn't find receipt, going to depspec regex for: sqlite3
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: db46
DEBUG: Didn't find receipt, going to depspec regex for: db46
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/databases/db46
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: ncurses
DEBUG: Found Dependency: receipt exists for ncurses
DEBUG: Searching for dependency: gdbm
DEBUG: Found Dependency: receipt exists for gdbm
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: python_select
DEBUG: Didn't find receipt, going to depspec regex for: python_select
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/sysutils/python_select
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Searching for dependency: python27
DEBUG: Didn't find receipt, going to depspec regex for: python27
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/lang/python27
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: libxml2
DEBUG: Found Dependency: receipt exists for libxml2
DEBUG: Searching for dependency: gtk2
DEBUG: Didn't find receipt, going to depspec regex for: gtk2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/gtk2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant x11 provides x11
DEBUG: Searching for dependency: dbus-glib
DEBUG: Didn't find receipt, going to depspec regex for: dbus-glib
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/dbus-glib
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: policykit
DEBUG: Didn't find receipt, going to depspec regex for: policykit
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/security/policykit
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: orbit2
DEBUG: Didn't find receipt, going to depspec regex for: orbit2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/orbit2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: atk
DEBUG: Didn't find receipt, going to depspec regex for: atk
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/atk
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: pango
DEBUG: Didn't find receipt, going to depspec regex for: pango
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/pango
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Executing variant x11 provides x11
DEBUG: Searching for dependency: gdk-pixbuf2
DEBUG: Didn't find receipt, going to depspec regex for: gdk-pixbuf2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/gdk-pixbuf2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXi
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXi
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXi
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXrandr
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXrandr
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXcursor
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXcursor
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXcursor
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXinerama
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXinerama
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXinerama
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXdamage
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXdamage
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXdamage
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXcomposite
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXcomposite
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXcomposite
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXfixes
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXfixes
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXfixes
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: shared-mime-info
DEBUG: Didn't find receipt, going to depspec regex for: shared-mime-info
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/shared-mime-info
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Checking for conflicts against pango
DEBUG: Searching for dependency: pango-devel
DEBUG: Didn't find receipt, going to depspec regex for: pango-devel
DEBUG: Searching for dependency: cairo
DEBUG: Didn't find receipt, going to depspec regex for: cairo
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/cairo
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant x11 provides x11
DEBUG: Searching for dependency: Xft2
DEBUG: Didn't find receipt, going to depspec regex for: Xft2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Checking for conflicts against cairo
DEBUG: Searching for dependency: cairo-devel
DEBUG: Didn't find receipt, going to depspec regex for: cairo-devel
DEBUG: Searching for dependency: libpixman
DEBUG: Didn't find receipt, going to depspec regex for: libpixman
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/libpixman
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: fontconfig
DEBUG: Didn't find receipt, going to depspec regex for: fontconfig
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: freetype
DEBUG: Didn't find receipt, going to depspec regex for: freetype
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/print/freetype
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: libpng
DEBUG: Didn't find receipt, going to depspec regex for: libpng
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: xrender
DEBUG: Didn't find receipt, going to depspec regex for: xrender
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xrender
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-xcb-util
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xcb-util
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xcb-util
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Checking for conflicts against libpixman
DEBUG: Searching for dependency: libpixman-devel
DEBUG: Didn't find receipt, going to depspec regex for: libpixman-devel
DEBUG: Searching for dependency: xorg-libX11
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libX11
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-renderproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-renderproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-util-macros
DEBUG: Didn't find receipt, going to depspec regex for: xorg-util-macros
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-xtrans
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xtrans
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-bigreqsproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-bigreqsproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-xcmiscproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xcmiscproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-xextproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xextproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-xf86bigfontproto
DEBUG: Didn't find receipt, going to depspec regex for:
xorg-xf86bigfontproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-inputproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-inputproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-libXdmcp
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXdmcp
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXau
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXau
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libxcb
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libxcb
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libxcb
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant python27 provides python27
DEBUG: Searching for dependency: xorg-xproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-kbproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-kbproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-xcb-proto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xcb-proto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xcb-proto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Executing variant python27 provides python27
DEBUG: Searching for dependency: xorg-libpthread-stubs
DEBUG: Didn't find receipt, going to depspec regex for:
xorg-libpthread-stubs
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libpthread-stubs
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: jasper
DEBUG: Didn't find receipt, going to depspec regex for: jasper
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/jasper
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: tiff
DEBUG: Didn't find receipt, going to depspec regex for: tiff
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/tiff
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: unzip
DEBUG: Didn't find receipt, going to depspec regex for: unzip
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: Searching for dependency: jpeg
DEBUG: Didn't find receipt, going to depspec regex for: jpeg
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: xorg-libXext
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXext
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: autoconf
DEBUG: Found Dependency: receipt exists for autoconf
DEBUG: Searching for dependency: automake
DEBUG: Found Dependency: receipt exists for automake
DEBUG: Searching for dependency: libtool
DEBUG: Found Dependency: receipt exists for libtool
DEBUG: Searching for dependency: xorg-randrproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-randrproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-randrproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-fixesproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-fixesproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-fixesproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-xineramaproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xineramaproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-xineramaproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-damageproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-damageproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-damageproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: xorg-compositeproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-compositeproto
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-compositeproto
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: dbus
DEBUG: Found Dependency: receipt exists for dbus
DEBUG: Searching for dependency: eggdbus
DEBUG: Didn't find receipt, going to depspec regex for: eggdbus
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/eggdbus
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: docbook-xsl
DEBUG: Found Dependency: receipt exists for docbook-xsl
DEBUG: Searching for dependency: libidl
DEBUG: Didn't find receipt, going to depspec regex for: libidl
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/libidl
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: flex
DEBUG: Didn't find receipt, going to depspec regex for: flex
DEBUG: Found Dependency: path: /usr/bin filename: flex regex: ^flex$
DEBUG: Found Dependency: path: /usr/bin filename: flex regex: ^flex$
DEBUG: Searching for dependency: bison
DEBUG: Didn't find receipt, going to depspec regex for: bison
DEBUG: Found Dependency: path: /usr/bin filename: bison regex: ^bison$
DEBUG: Found Dependency: path: /usr/bin filename: bison regex: ^bison$
DEBUG: Searching for dependency: xorg-libice
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libice
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: py27-gobject
DEBUG: Didn't find receipt, going to depspec regex for: py27-gobject
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py27-gobject
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: py27-gtk
DEBUG: Didn't find receipt, going to depspec regex for: py27-gtk
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py27-gtk
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: gtksourceview2
DEBUG: Didn't find receipt, going to depspec regex for: gtksourceview2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/gtksourceview2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Searching for dependency: libffi
DEBUG: Didn't find receipt, going to depspec regex for: libffi
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/devel/libffi
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: libglade2
DEBUG: Didn't find receipt, going to depspec regex for: libglade2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/gnome/libglade2
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: py27-cairo
DEBUG: Didn't find receipt, going to depspec regex for: py27-cairo
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py27-cairo
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: py27-numpy
DEBUG: Didn't find receipt, going to depspec regex for: py27-numpy
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py27-numpy
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Searching for dependency: py27-py
DEBUG: Didn't find receipt, going to depspec regex for: py27-py
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py27-py
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Searching for dependency: fftw-3
DEBUG: Found Dependency: receipt exists for fftw-3
DEBUG: Searching for dependency: py27-nose
DEBUG: Didn't find receipt, going to depspec regex for: py27-nose
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py-nose
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl
DEBUG: Re-registering default for build.cmd
DEBUG: Re-registering default for destroot.cmd
DEBUG: Re-registering default for destroot.destdir
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Searching for dependency: py27-distribute
DEBUG: Didn't find receipt, going to depspec regex for: py27-distribute
DEBUG: Changing to port directory: /opt/local/var/macports/sources/
rsync.macports.org/release/ports/python/py-distribute
DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl
DEBUG: Re-registering default for build.cmd
DEBUG: Re-registering default for destroot.cmd
DEBUG: Re-registering default for destroot.destdir
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/
rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
--->  Dependencies to be installed: gconf dbus-glib gtk-doc gnome-doc-utils
py27-libxml2 python27 db46 openssl python_select sqlite3 python27 rarian
getopt gnome-doc-utils gtk2 atk gdk-pixbuf2 jasper jpeg libpng tiff pango
Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto
xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp
xorg-libxcb xorg-libpthread-stubs xorg-xcb-proto xorg-util-macros
xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans
xorg-renderproto cairo libpixman xorg-xcb-util shared-mime-info
xorg-libXcomposite xorg-compositeproto xorg-libXext xorg-libXfixes
xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi
xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2
libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject
libffi py27-gtk libglade2 py27-cairo py27-numpy py27-nose py27-distribute
py27-py xorg-libsm xorg-libice
DEBUG: Starting logging for db46
DEBUG: Executing org.macports.main (db46)
DEBUG: Skipping completed org.macports.archivefetch (db46)
DEBUG: Skipping completed org.macports.fetch (db46)
DEBUG: checksum phase started at Wed Sep  7 21:19:24 EDT 2011
--->  Verifying checksum(s) for db46
DEBUG: Executing org.macports.checksum (db46)
--->  Checksumming patch.4.6.21.1
Error: Checksum (md5) mismatch for patch.4.6.21.1
Portfile checksum: patch.4.6.21.1 md5 4878872edfc53c6ecb871b1062a4bdaf
Distfile checksum: patch.4.6.21.1 md5 3bf421f95088ea2f788670a0cf929c9c
Error: Checksum (sha1) mismatch for patch.4.6.21.1
Portfile checksum: patch.4.6.21.1 sha1
c7c155705687e4de03d06c2ea86940f573fdac0b
Distfile checksum: patch.4.6.21.1 sha1
c0961fa3debb7eed1cd2247ceade3b099ee76074
Error: Checksum (rmd160) mismatch for patch.4.6.21.1
Portfile checksum: patch.4.6.21.1 rmd160
8c11e9b991ac6559f22ece2d93617b16126049e8
Distfile checksum: patch.4.6.21.1 rmd160
db474c18c136e6d4263f30795c4135c44c457a03
--->  Checksumming patch.4.6.21.2
Error: Checksum (md5) mismatch for patch.4.6.21.2
Portfile checksum: patch.4.6.21.2 md5 55074e53d3acae2dcbeae8322f96e522
Distfile checksum: patch.4.6.21.2 md5 3bf421f95088ea2f788670a0cf929c9c
Error: Checksum (sha1) mismatch for patch.4.6.21.2
Portfile checksum: patch.4.6.21.2 sha1
a694b71088ba99b74042e7568f395fe467bb6590
Distfile checksum: patch.4.6.21.2 sha1
c0961fa3debb7eed1cd2247ceade3b099ee76074
Error: Checksum (rmd160) mismatch for patch.4.6.21.2
Portfile checksum: patch.4.6.21.2 rmd160
f8abf554552db668037e046dea54700ce3340bf8
Distfile checksum: patch.4.6.21.2 rmd160
db474c18c136e6d4263f30795c4135c44c457a03
--->  Checksumming patch.4.6.21.3
Error: Checksum (md5) mismatch for patch.4.6.21.3
Portfile checksum: patch.4.6.21.3 md5 7a6e11b54712caf752f9c4a52babe60c
Distfile checksum: patch.4.6.21.3 md5 3bf421f95088ea2f788670a0cf929c9c
Error: Checksum (sha1) mismatch for patch.4.6.21.3
Portfile checksum: patch.4.6.21.3 sha1
d52aa498943cfaa339ad6bf2cf7b836a40627701
Distfile checksum: patch.4.6.21.3 sha1
c0961fa3debb7eed1cd2247ceade3b099ee76074
Error: Checksum (rmd160) mismatch for patch.4.6.21.3
Portfile checksum: patch.4.6.21.3 rmd160
4e6b7ed1e1c69cba54351d76a0b8543107a655b8
Distfile checksum: patch.4.6.21.3 rmd160
db474c18c136e6d4263f30795c4135c44c457a03
--->  Checksumming patch.4.6.21.4
Error: Checksum (md5) mismatch for patch.4.6.21.4
Portfile checksum: patch.4.6.21.4 md5 ae7d3d587355fe85b512ef09b9a77d19
Distfile checksum: patch.4.6.21.4 md5 3bf421f95088ea2f788670a0cf929c9c
Error: Checksum (sha1) mismatch for patch.4.6.21.4
Portfile checksum: patch.4.6.21.4 sha1
e2190185c667edb97e800495ce6eb4f95f43eb87
Distfile checksum: patch.4.6.21.4 sha1
c0961fa3debb7eed1cd2247ceade3b099ee76074
Error: Checksum (rmd160) mismatch for patch.4.6.21.4
Portfile checksum: patch.4.6.21.4 rmd160
f1d18e59c311fb4e1f00a3b6220269fca17df312
Distfile checksum: patch.4.6.21.4 rmd160
db474c18c136e6d4263f30795c4135c44c457a03
--->  Checksumming db-4.6.21.tar.gz
DEBUG: Correct (md5) checksum for db-4.6.21.tar.gz
DEBUG: Correct (sha1) checksum for db-4.6.21.tar.gz
DEBUG: Correct (rmd160) checksum for db-4.6.21.tar.gz
The correct checksum line may be:
checksums           patch.4.6.21.1 \
                    md5     3bf421f95088ea2f788670a0cf929c9c \
                    sha1    c0961fa3debb7eed1cd2247ceade3b099ee76074 \
                    rmd160  db474c18c136e6d4263f30795c4135c44c457a03 \
                    patch.4.6.21.2 \
                    md5     3bf421f95088ea2f788670a0cf929c9c \
                    sha1    c0961fa3debb7eed1cd2247ceade3b099ee76074 \
                    rmd160  db474c18c136e6d4263f30795c4135c44c457a03 \
                    patch.4.6.21.3 \
                    md5     3bf421f95088ea2f788670a0cf929c9c \
                    sha1    c0961fa3debb7eed1cd2247ceade3b099ee76074 \
                    rmd160  db474c18c136e6d4263f30795c4135c44c457a03 \
                    patch.4.6.21.4 \
                    md5     3bf421f95088ea2f788670a0cf929c9c \
                    sha1    c0961fa3debb7eed1cd2247ceade3b099ee76074 \
                    rmd160  db474c18c136e6d4263f30795c4135c44c457a03 \
                    db-4.6.21.tar.gz \
                    md5     718082e7e35fc48478a2334b0bc4cd11 \
                    sha1    5be3beb82e42a78ff671a3f5a4c30e5652972119 \
                    rmd160  ccf9a4b85cc0464b2f3c2f2da29d99328fd4978e
***
The non-matching file appears to be HTML. See this page for possible reasons
for the checksum mismatch:
<https://trac.macports.org/wiki/MisbehavingServers>
***
Error: Target org.macports.checksum returned: Unable to verify file
checksums
DEBUG: Backtrace: Unable to verify file checksums
    while executing
"$procedure $targetname"
Warning: the following items did not execute (for db46):
org.macports.activate org.macports.checksum org.macports.extract
org.macports.patch org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Error: Failed to install db46
DEBUG: couldn't open
"/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex":
no such file or directory
    while executing
"open [file join $dir tclIndex]"
Log for db46 is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_db46/db46/main.log
Error: The following dependencies were not installed: gconf dbus-glib
gtk-doc gnome-doc-utils py27-libxml2 python27 db46 openssl python_select
sqlite3 python27 rarian getopt gnome-doc-utils gtk2 atk gdk-pixbuf2 jasper
jpeg libpng tiff pango Xft2 fontconfig freetype xrender xorg-libX11
xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto
xorg-libXdmcp xorg-libxcb xorg-libpthread-stubs xorg-xcb-proto
xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto
xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb-util shared-mime-info
xorg-libXcomposite xorg-compositeproto xorg-libXext xorg-libXfixes
xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi
xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2
libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject
libffi py27-gtk libglade2 py27-cairo py27-numpy py27-nose py27-distribute
py27-py xorg-libsm xorg-libice
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20110907/691ab179/attachment.html>