Openssh install :error: Unable to verify file checksums glib-2.30.3.tar.xz

Kc Moore kmcc4 at hotmail.com
Sun Mar 25 01:45:38 PDT 2012 

Hardware: PowerPC G4 1.42Ghz / 1 GB Ram MacminiPowerMac10,1
OS: Leopard 10.5.8Software: MacPorts-2.0.4.pkg
Command Executed:  sudo port install openssh
Question1:  Does this warrant a trouble ticket?Question2:  Can I override the checksum error the log shows the numbers match up.Question3:  Should I wait for this to be fixed?
Thanks for any help in advance:)
Log:version:1:debug:main epoch: in tree: 0 installed: 0:debug:main xz 5.0.3_0 exists in the ports tree:debug:main xz 5.0.3_0  is the latest installed:debug:main xz 5.0.3_0  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! xz 5.0.3_0 >= xz 5.0.3_0:debug:main epoch: in tree: 0 installed: 0:debug:main libiconv 1.14_0 exists in the ports tree:debug:main libiconv 1.14_0  is the latest installed:debug:main libiconv 1.14_0  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0:debug:main epoch: in tree: 0 installed: 0:debug:main gettext 0.18.1.1_2 exists in the ports tree:debug:main gettext 0.18.1.1_2  is the latest installed:debug:main gettext 0.18.1.1_2  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2:debug:main epoch: in tree: 0 installed: 0:debug:main ncurses 5.9_1 exists in the ports tree:debug:main ncurses 5.9_1  is the latest installed:debug:main ncurses 5.9_1  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1:debug:main epoch: in tree: 0 installed: 0:debug:main expat 2.0.1_1 exists in the ports tree:debug:main expat 2.0.1_1  is the latest installed:debug:main expat 2.0.1_1  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1:debug:main epoch: in tree: 0 installed: 0:debug:main zlib 1.2.6_0 exists in the ports tree:debug:main zlib 1.2.6_0  is the latest installed:debug:main zlib 1.2.6_0  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0:debug:main epoch: in tree: 0 installed: 0:debug:main libffi 3.0.10_2 exists in the ports tree:debug:main libffi 3.0.10_2  is the latest installed:debug:main libffi 3.0.10_2  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2:debug:main epoch: in tree: 0 installed: 0:debug:main perl5 5.12.3_1 exists in the ports tree:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed:debug:main perl5 5.12.3_1 +perl5_12 is active:debug:main Merging existing variants '+perl5_12' into variants:debug:main new fully merged portvariants: perl5_12 +:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main universal_variant is false, so not adding the default universal variant:debug:main Executing variant perl5_12 provides perl5_12:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1:debug:main epoch: in tree: 0 installed: 0:debug:main perl5.12 5.12.3_3 exists in the ports tree:debug:main perl5.12 5.12.3_3  is the latest installed:debug:main perl5.12 5.12.3_3  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3:debug:main epoch: in tree: 0 installed: 0:debug:main gdbm 1.10_1 exists in the ports tree:debug:main gdbm 1.10_1  is the latest installed:debug:main gdbm 1.10_1  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1:msg:main --->  Computing dependencies for glib2:info:main .:debug:main Checking for conflicts against glib2:debug:main Searching for dependency: glib2-devel:debug:main Didn't find receipt, going to depspec regex for: glib2-devel:debug:main Searching for dependency: xz:debug:main Found Dependency: receipt exists for xz:debug:main Searching for dependency: gettext:debug:main Found Dependency: receipt exists for gettext:debug:main Searching for dependency: libiconv:debug:main Found Dependency: receipt exists for libiconv:debug:main Searching for dependency: zlib:debug:main Found Dependency: receipt exists for zlib:debug:main Searching for dependency: libffi:debug:main Found Dependency: receipt exists for libffi:debug:main Searching for dependency: perl5:debug:main Found Dependency: receipt exists for perl5:msg:main :debug:main Executing org.macports.main (glib2):debug:main changing euid/egid - current euid: 0 - current egid: 0:debug:main egid changed to: 500:debug:main euid changed to: 502:debug:main Skipping completed org.macports.archivefetch (glib2):debug:main Privilege de-escalation not attempted as not running as root.:debug:main Skipping completed org.macports.fetch (glib2):debug:main Privilege de-escalation not attempted as not running as root.:debug:checksum checksum phase started at Thu Mar 22 20:55:48 MDT 2012:notice:checksum --->  Verifying checksum(s) for glib2:debug:checksum Executing org.macports.checksum (glib2):info:checksum --->  Checksumming glib-2.30.3.tar.xz:error:checksum Checksum (rmd160) mismatch for glib-2.30.3.tar.xz:info:checksum Portfile checksum: glib-2.30.3.tar.xz rmd160 0887b08e2fff75c325ed1fb1123baaf42dc9779b:info:checksum Distfile checksum: glib-2.30.3.tar.xz rmd160 fc40826807f890ad6c34bf91b06d72e76ebec9f0:error:checksum Checksum (sha256) mismatch for glib-2.30.3.tar.xz:info:checksum Portfile checksum: glib-2.30.3.tar.xz sha256 e6cbb27c71c445993346e785e8609cc75cea2941e32312e544872feba572dd27:info:checksum Distfile checksum: glib-2.30.3.tar.xz sha256 e6038248d8bd00eeddebf90d630659d862989e8422f7ff73b0e291cb61ee3e22:info:checksum The correct checksum line may be::info:checksum checksums           rmd160  fc40826807f890ad6c34bf91b06d72e76ebec9f0 \                    sha256  e6038248d8bd00eeddebf90d630659d862989e8422f7ff73b0e291cb61ee3e22:error:checksum Target org.macports.checksum returned: Unable to verify file checksums:debug:checksum Backtrace: Unable to verify file checksums    while executing"$procedure $targetname":info:checksum Warning: the following items did not execute (for glib2): org.macports.activate org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install:notice:checksum Log for glib2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/main.log
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20120325/c6a20fb2/attachment.html>

More information about the macports-users mailing list