error installing dovecot2-sieve
Terry Barnum
terry at dop.com
Fri May 25 16:54:28 PDT 2012
I'm not sure what I'm doing wrong but I can't get the dovecot2-sieve port to install. It fails during configuring. I've tried sudo port clean dovecot2-sieve. Macports is up to date, XCode 4.2, 10.6.8, Intel iMac, dovecot2 is installed. It installs fine on another iMac so it's got to be a configuration thing on my part but I don't know what. Googling for the RANLIB and AC_PROG_RANLIB errors didn't help.
Here's the (long) log file:
mail:local terry$ more /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_dovecot2-sieve/dovecot2-sieve/main.log
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main dovecot2 2.1.5_1 exists in the ports tree
:debug:main dovecot2 2.1.5_1 +mysql5 is the latest installed
:debug:main dovecot2 2.1.5_1 +mysql5 is active
:debug:main Merging existing variants '+mysql5' into variants
:debug:main new fully merged portvariants: mysql5 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/dovecot2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant mysql5 provides mysql5
:debug:main No need to upgrade! dovecot2 2.1.5_1 >= dovecot2 2.1.5_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 is the latest installed
:debug:main libiconv 1.14_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/varia::debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/varian::debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
::debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
::debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
::debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
::debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 is the latest installed
:debug:main zlib 1.2.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 is the latest installed
:debug:main openssl 1.0.1c_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mysql5 5.1.62_0 exists in the ports tree
:debug:main mysql5 5.1.62_0 is the latest installed
:debug:main mysql5 5.1.62_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/mysql5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! mysql5 5.1.62_0 >= mysql5 5.1.62_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0 is the latest installed
:debug:main readline 6.2.000_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 is the latest installed
:debug:main ncurses 5.9_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:msg:main ---> Computing dependencies for dovecot2-sieve:info:main .:debug:main dovecot2-sieve has no conflicts
:debug:main Searching for dependency: dovecot2
:debug:main Found Dependency: receipt exists for dovecot2
:msg:main
:debug:main Executing org.macports.main (dovecot2-sieve)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 504
:debug:main euid changed to: 504
:debug:main Skipping completed org.macports.archivefetch (dovecot2-sieve)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (dovecot2-sieve)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (dovecot2-sieve)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (dovecot2-sieve)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (dovecot2-sieve)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Fri May 25 16:14:12 PDT 2012
:notice:configure ---> Configuring dovecot2-sieve
:debug:configure Using compiler 'Mac OS X gcc 4.2'
:debug:configure Executing proc-pre-org.macports.configure-configure-0
:info:configure configure.in:17: installing './install-sh'
:info:configure configure.in:17: installing './missing'
:info:configure src/lib-managesieve/Makefile.am:1: error: library used but 'RANLIB' is undefined
:info:configure src/lib-managesieve/Makefile.am:1: The usual way to define 'RANLIB' is to add 'AC_PROG_RANLIB'
:info:configure src/lib-managesieve/Makefile.am:1: to 'configure.in' and run 'autoconf' again.
:info:configure src/lib-managesieve/Makefile.am: installing './depcomp'
:info:configure src/lib-sieve-tool/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve-tool/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve-tool/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve-tool/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve-tool/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/Makefile.am:3: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/Makefile.am:3: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/Makefile.am:3: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/Makefile.am:3: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/Makefile.am:3: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/body/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/body/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/body/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/body/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/body/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/comparator-i-ascii-numeric/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/comparator-i-ascii-numeric/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/comparator-i-ascii-numeric/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/comparator-i-ascii-numeric/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/comparator-i-ascii-numeric/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/copy/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/copy/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/copy/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/copy/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/copy/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/date/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/date/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/date/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/date/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/date/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/editheader/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/editheader/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/editheader/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/editheader/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/editheader/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/enotify/Makefile.am:3: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/enotify/Makefile.am:3: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/enotify/Makefile.am:3: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/enotify/Makefile.am:3: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/enotify/Makefile.am:3: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/enotify/mailto/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/enotify/mailto/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/enotify/mailto/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/enotify/mailto/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/enotify/mailto/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/environment/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/environment/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/environment/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/environment/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/environment/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/ihave/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/ihave/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/ihave/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/ihave/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/ihave/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/imap4flags/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/imap4flags/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/imap4flags/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/imap4flags/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/imap4flags/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/include/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/include/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/include/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/include/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/include/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/mailbox/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/mailbox/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/mailbox/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/mailbox/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/mailbox/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/notify/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/notify/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/notify/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/notify/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/notify/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/regex/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/regex/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/regex/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/regex/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/regex/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/relational/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/relational/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/relational/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/relational/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/relational/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/spamvirustest/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/spamvirustest/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/spamvirustest/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/spamvirustest/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/spamvirustest/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/subaddress/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/subaddress/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/subaddress/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/subaddress/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/subaddress/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/vacation/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/vacation/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/vacation/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/vacation/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/vacation/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/variables/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/variables/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/variables/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/variables/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/variables/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sieve/plugins/vnd.dovecot/debug/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/lib-sieve/plugins/vnd.dovecot/debug/Makefile.am:1: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/lib-sieve/plugins/vnd.dovecot/debug/Makefile.am:1: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/lib-sieve/plugins/vnd.dovecot/debug/Makefile.am:1: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/lib-sieve/plugins/vnd.dovecot/debug/Makefile.am:1: its definition is in aclocal's search path.
:info:configure src/lib-sievestorage/Makefile.am:1: error: library used but 'RANLIB' is undefined
:info:configure src/lib-sievestorage/Makefile.am:1: The usual way to define 'RANLIB' is to add 'AC_PROG_RANLIB'
:info:configure src/lib-sievestorage/Makefile.am:1: to 'configure.in' and run 'autoconf' again.
:info:configure src/managesieve-login/Makefile.am:14: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/managesieve-login/Makefile.am:14: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/managesieve-login/Makefile.am:14: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/managesieve-login/Makefile.am:14: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/managesieve-login/Makefile.am:14: its definition is in aclocal's search path.
:info:configure src/managesieve/Makefile.am:16: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/managesieve/Makefile.am:16: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/managesieve/Makefile.am:16: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/managesieve/Makefile.am:16: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/managesieve/Makefile.am:16: its definition is in aclocal's search path.
:info:configure src/plugins/lda-sieve/Makefile.am:9: error: Libtool library used but 'LIBTOOL' is undefined
:info:configure src/plugins/lda-sieve/Makefile.am:9: The usual way to define 'LIBTOOL' is to add 'LT_INIT'
:info:configure src/plugins/lda-sieve/Makefile.am:9: to 'configure.in' and run 'aclocal' and 'autoconf' again.
:info:configure src/plugins/lda-sieve/Makefile.am:9: If 'LT_INIT' is in 'configure.in', make sure
:info:configure src/plugins/lda-sieve/Makefile.am:9: its definition is in aclocal's search path.
:info:configure autoreconf: automake failed with exit status: 1
:info:configure Command failed: cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_dovecot2-sieve/dovecot2-sieve/work/dovecot-2-1-pigeonhole-1617 && ./autogen.sh
:info:configure Exit code: 1
:error:configure org.macports.configure for port dovecot2-sieve returned: command execution failed
:debug:configure Error code: NONE
:debug:configure Backtrace: command execution failed
while executing
"$pre $targetname"
:info:configure Warning: targets not executed for dovecot2-sieve: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
:notice:configure Please see the log file for port dovecot2-sieve for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_mail_dovecot2-sieve/dovecot2-sieve/main.log
Terry Barnum
digital OutPost
http://www.dop.com
More information about the macports-users
mailing list