[MacPorts] #20703: Cannot install ffmpeg (libsdl) on SnowLeopard 10A432
MacPorts
noreply at macports.org
Mon Aug 17 12:27:32 PDT 2009
#20703: Cannot install ffmpeg (libsdl) on SnowLeopard 10A432
-------------------------------+--------------------------------------------
Reporter: aieouie@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone: MacPorts 1.9.0
Component: ports | Version: 1.8.99
Keywords: | Port:
-------------------------------+--------------------------------------------
Comment(by aieouie@…):
macadam:~ adam$ sudo port -d install ffmpeg
Password:
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port ffmpeg.
DEBUG: Requested variant i386 is not provided by port ffmpeg.
DEBUG: Requested variant macosx is not provided by port ffmpeg.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lame 3.98.2_1 exists in the ports tree
DEBUG: lame 3.98.2_1 is the latest installed
DEBUG: lame 3.98.2_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port lame.
DEBUG: Requested variant i386 is not provided by port lame.
DEBUG: Requested variant macosx is not provided by port lame.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! lame 3.98.2_1 >= lame 3.98.2_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libogg 1.1.4_0 exists in the ports tree
DEBUG: libogg 1.1.4_0 is the latest installed
DEBUG: libogg 1.1.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libogg.
DEBUG: Requested variant i386 is not provided by port libogg.
DEBUG: Requested variant macosx is not provided by port libogg.
DEBUG: No need to upgrade! libogg 1.1.4_0 >= libogg 1.1.4_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dirac 1.0.2_0 exists in the ports tree
DEBUG: dirac 1.0.2_0 is the latest installed
DEBUG: dirac 1.0.2_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port dirac.
DEBUG: Requested variant i386 is not provided by port dirac.
DEBUG: Requested variant macosx is not provided by port dirac.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cppunit 1.12.1_0 exists in the ports tree
DEBUG: cppunit 1.12.1_0 is the latest installed
DEBUG: cppunit 1.12.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port cppunit.
DEBUG: Requested variant i386 is not provided by port cppunit.
DEBUG: Requested variant macosx is not provided by port cppunit.
DEBUG: No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0
DEBUG: No need to upgrade! dirac 1.0.2_0 >= dirac 1.0.2_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: faac 1.28_1 exists in the ports tree
DEBUG: faac 1.28_1 is the latest installed
DEBUG: faac 1.28_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port faac.
DEBUG: Requested variant i386 is not provided by port faac.
DEBUG: Requested variant macosx is not provided by port faac.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6a_0 exists in the ports tree
DEBUG: libtool 2.2.6a_0 is the latest installed
DEBUG: libtool 2.2.6a_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11_0 exists in the ports tree
DEBUG: automake 1.11_0 is the latest installed
DEBUG: automake 1.11_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.64_0 exists in the ports tree
DEBUG: autoconf 2.64_0 is the latest installed
DEBUG: autoconf 2.64_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0 is the latest installed
DEBUG: m4 1.4.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1 is the latest installed
DEBUG: help2man 1.36.4_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0 is the latest installed
DEBUG: p5-locale-gettext 1.05_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0 is the latest installed
DEBUG: libiconv 1.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.64_0 >= autoconf 2.64_0
DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmp4v2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libmp4v2 1.5.0.1_0 exists in the ports tree
DEBUG: libmp4v2 1.5.0.1_0 is the latest installed
DEBUG: libmp4v2 1.5.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmp4v2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libmp4v2.
DEBUG: Requested variant i386 is not provided by port libmp4v2.
DEBUG: Requested variant macosx is not provided by port libmp4v2.
DEBUG: No need to upgrade! libmp4v2 1.5.0.1_0 >= libmp4v2 1.5.0.1_0
DEBUG: No need to upgrade! faac 1.28_1 >= faac 1.28_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: faad2 2.6.1_1 exists in the ports tree
DEBUG: faad2 2.6.1_1 is the latest installed
DEBUG: faad2 2.6.1_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port faad2.
DEBUG: Requested variant macosx is not provided by port faad2.
DEBUG: Executing variant darwin provides darwin
Warning: Skipping upgrade since faad2 2.6.1_1 >= faad2 2.6.1_1, even
though installed variants "" do not match "+darwin". Use 'upgrade
--enforce-variants' to switch to the requested variants.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: XviD 1.2.2_0 exists in the ports tree
DEBUG: XviD 1.2.2_0 is the latest installed
DEBUG: XviD 1.2.2_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port XviD.
DEBUG: Requested variant i386 is not provided by port XviD.
DEBUG: Requested variant macosx is not provided by port XviD.
DEBUG: No need to upgrade! XviD 1.2.2_0 >= XviD 1.2.2_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_2 exists in the ports tree
DEBUG: bzip2 1.0.5_2 is the latest installed
DEBUG: bzip2 1.0.5_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
Warning: Skipping upgrade since bzip2 1.0.5_2 >= bzip2 1.0.5_2, even
though installed variants "" do not match "+darwin". Use 'upgrade
--enforce-variants' to switch to the requested variants.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmake 3.81_0 exists in the ports tree
DEBUG: gmake 3.81_0 is the latest installed
DEBUG: gmake 3.81_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gmake.
DEBUG: Requested variant i386 is not provided by port gmake.
DEBUG: Requested variant macosx is not provided by port gmake.
DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
---> Computing dependencies for ffmpeg
DEBUG: Searching for dependency: lame
DEBUG: Found Dependency: receipt exists for lame
DEBUG: Searching for dependency: libvorbis
DEBUG: Didn't find receipt, going to depspec regex for: libvorbis
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libvorbis.
DEBUG: Requested variant i386 is not provided by port libvorbis.
DEBUG: Requested variant macosx is not provided by port libvorbis.
DEBUG: Searching for dependency: libogg
DEBUG: Found Dependency: receipt exists for libogg
DEBUG: Searching for dependency: libtheora
DEBUG: Didn't find receipt, going to depspec regex for: libtheora
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libtheora.
DEBUG: Requested variant i386 is not provided by port libtheora.
DEBUG: Requested variant macosx is not provided by port libtheora.
DEBUG: Searching for dependency: dirac
DEBUG: Found Dependency: receipt exists for dirac
DEBUG: Searching for dependency: schroedinger
DEBUG: Didn't find receipt, going to depspec regex for: schroedinger
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port schroedinger.
DEBUG: Requested variant i386 is not provided by port schroedinger.
DEBUG: Requested variant macosx is not provided by port schroedinger.
DEBUG: Searching for dependency: faac
DEBUG: Found Dependency: receipt exists for faac
DEBUG: Searching for dependency: faad2
DEBUG: Found Dependency: receipt exists for faad2
DEBUG: Searching for dependency: XviD
DEBUG: Found Dependency: receipt exists for XviD
DEBUG: Searching for dependency: x264
DEBUG: Didn't find receipt, going to depspec regex for: x264
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port x264.
DEBUG: Requested variant i386 is not provided by port x264.
DEBUG: Requested variant macosx is not provided by port x264.
DEBUG: Searching for dependency: libsdl
DEBUG: Didn't find receipt, going to depspec regex for: libsdl
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libsdl.
DEBUG: Requested variant i386 is not provided by port libsdl.
DEBUG: Requested variant macosx is not provided by port libsdl.
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: zlib
DEBUG: Didn't find receipt, going to depspec regex for: zlib
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: Searching for dependency: gmake
DEBUG: Found Dependency: receipt exists for gmake
DEBUG: Searching for dependency: libogg
DEBUG: Found Dependency: receipt exists for libogg
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: libvorbis
DEBUG: Didn't find receipt, going to depspec regex for: libvorbis
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: Searching for dependency: libogg
DEBUG: Found Dependency: receipt exists for libogg
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: liboil
DEBUG: Didn't find receipt, going to depspec regex for: liboil
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port liboil.
DEBUG: Requested variant i386 is not provided by port liboil.
DEBUG: Requested variant macosx is not provided by port liboil.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: glib2
DEBUG: Didn't find receipt, going to depspec regex for: glib2
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port glib2.
DEBUG: Requested variant macosx is not provided by port glib2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: python_select
DEBUG: Didn't find receipt, going to depspec regex for: python_select
DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: xorg-libXext
DEBUG: Found Dependency: receipt exists for xorg-libXext
DEBUG: Searching for dependency: xorg-libXrandr
DEBUG: Found Dependency: receipt exists for xorg-libXrandr
DEBUG: Searching for dependency: xrender
DEBUG: Found Dependency: receipt exists for xrender
DEBUG: Executing org.macports.main (libsdl)
DEBUG: Skipping completed org.macports.fetch (libsdl)
DEBUG: Skipping completed org.macports.checksum (libsdl)
DEBUG: Skipping completed org.macports.extract (libsdl)
DEBUG: Skipping completed org.macports.patch (libsdl)
DEBUG: Skipping completed org.macports.configure (libsdl)
---> Building libsdl
DEBUG: Executing org.macports.build (libsdl)
DEBUG: Environment: CPATH='/opt/local/include'
LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.13"
&& /usr/bin/make -j1 all'
/bin/sh ./libtool --mode=compile /Developer/usr/llvm-gcc-4.2/bin/llvm-
gcc-4.2 -O2 -I/opt/local/include -I./include -D_GNU_SOURCE=1
-DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX -fvisibility=hidden
-I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE -force_cpusubtype_ALL
-fpascal-strings -c ./src/video/SDL_RLEaccel.c -o build/SDL_RLEaccel.lo
/Developer/usr/llvm-gcc-4.2/bin/llvm-gcc-4.2 -O2 -I/opt/local/include
-I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
-fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
-force_cpusubtype_ALL -fpascal-strings -c ./src/video/SDL_RLEaccel.c
-fno-common -DPIC -o build/.libs/SDL_RLEaccel.o
/var/tmp//ccYD0N5F.s:1031:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:1661:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:2304:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:2635:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:3494:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4004:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4493:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4778:suffix or operands invalid for `movq'
make: *** [build/SDL_RLEaccel.lo] Error 1
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.13"
&& /usr/bin/make -j1 all " returned error 2
Command output: /bin/sh ./libtool --mode=compile /Developer/usr/llvm-
gcc-4.2/bin/llvm-gcc-4.2 -O2 -I/opt/local/include -I./include
-D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
-fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
-force_cpusubtype_ALL -fpascal-strings -c ./src/video/SDL_RLEaccel.c -o
build/SDL_RLEaccel.lo
/Developer/usr/llvm-gcc-4.2/bin/llvm-gcc-4.2 -O2 -I/opt/local/include
-I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
-fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
-force_cpusubtype_ALL -fpascal-strings -c ./src/video/SDL_RLEaccel.c
-fno-common -DPIC -o build/.libs/SDL_RLEaccel.o
/var/tmp//ccYD0N5F.s:1031:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:1661:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:2304:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:2635:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:3494:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4004:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4493:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4778:suffix or operands invalid for `movq'
make: *** [build/SDL_RLEaccel.lo] Error 1
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.13"
&& /usr/bin/make -j1 all " returned error 2
Command output: /bin/sh ./libtool --mode=compile /Developer/usr/llvm-
gcc-4.2/bin/llvm-gcc-4.2 -O2 -I/opt/local/include -I./include
-D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
-fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
-force_cpusubtype_ALL -fpascal-strings -c ./src/video/SDL_RLEaccel.c -o
build/SDL_RLEaccel.lo
/Developer/usr/llvm-gcc-4.2/bin/llvm-gcc-4.2 -O2 -I/opt/local/include
-I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
-fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
-force_cpusubtype_ALL -fpascal-strings -c ./src/video/SDL_RLEaccel.c
-fno-common -DPIC -o build/.libs/SDL_RLEaccel.o
/var/tmp//ccYD0N5F.s:1031:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:1661:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:2304:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:2635:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:3494:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4004:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4493:suffix or operands invalid for `movq'
/var/tmp//ccYD0N5F.s:4778:suffix or operands invalid for `movq'
make: *** [build/SDL_RLEaccel.lo] Error 1
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for libsdl):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: The following dependencies failed to build: libsdl libtheora
libvorbis schroedinger liboil glib2 x264 zlib
Error: Status 1 encountered during processing.
macadam:~ adam$
--
Ticket URL: <http://trac.macports.org/ticket/20703#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list