[MacPorts] #20703: Cannot install ffmpeg (libsdl) on SnowLeopard 10A432

MacPorts noreply at macports.org
Tue Aug 18 01:35:48 PDT 2009 

#20703: Cannot install ffmpeg (libsdl) on SnowLeopard 10A432
-------------------------------+--------------------------------------------
 Reporter:  aieouie@…          |       Owner:  macports-tickets@…                   
     Type:  defect             |      Status:  new                                  
 Priority:  Normal             |   Milestone:  MacPorts 1.9.0                       
Component:  ports              |     Version:  1.8.99                               
 Keywords:                     |        Port:                                       
-------------------------------+--------------------------------------------

Comment(by aieouie@…):

 Other error from other computer (MacBook CoreDuo)

 Last login: Tue Aug 18 09:54:01 on ttys000
 MacBook-de-admin:~ admin$ sudo port -d install ffmpeg
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port ffmpeg.
 DEBUG: Requested variant i386 is not provided by port ffmpeg.
 DEBUG: Requested variant macosx is not provided by port ffmpeg.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lame 3.98.2_1 exists in the ports tree
 DEBUG: lame 3.98.2_1  is the latest installed
 DEBUG: lame 3.98.2_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port lame.
 DEBUG: Requested variant i386 is not provided by port lame.
 DEBUG: Requested variant macosx is not provided by port lame.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: No need to upgrade! lame 3.98.2_1 >= lame 3.98.2_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libogg 1.1.4_0 exists in the ports tree
 DEBUG: libogg 1.1.4_0  is the latest installed
 DEBUG: libogg 1.1.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libogg.
 DEBUG: Requested variant i386 is not provided by port libogg.
 DEBUG: Requested variant macosx is not provided by port libogg.
 DEBUG: No need to upgrade! libogg 1.1.4_0 >= libogg 1.1.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: dirac 1.0.2_0 exists in the ports tree
 DEBUG: dirac 1.0.2_0  is the latest installed
 DEBUG: dirac 1.0.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port dirac.
 DEBUG: Requested variant i386 is not provided by port dirac.
 DEBUG: Requested variant macosx is not provided by port dirac.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cppunit 1.12.1_0 exists in the ports tree
 DEBUG: cppunit 1.12.1_0  is the latest installed
 DEBUG: cppunit 1.12.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port cppunit.
 DEBUG: Requested variant i386 is not provided by port cppunit.
 DEBUG: Requested variant macosx is not provided by port cppunit.
 DEBUG: No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0
 DEBUG: No need to upgrade! dirac 1.0.2_0 >= dirac 1.0.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: faac 1.28_1 exists in the ports tree
 DEBUG: faac 1.28_1  is the latest installed
 DEBUG: faac 1.28_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port faac.
 DEBUG: Requested variant i386 is not provided by port faac.
 DEBUG: Requested variant macosx is not provided by port faac.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6a_0 exists in the ports tree
 DEBUG: libtool 2.2.6a_0  is the latest installed
 DEBUG: libtool 2.2.6a_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11_0 exists in the ports tree
 DEBUG: automake 1.11_0  is the latest installed
 DEBUG: automake 1.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.64_0 exists in the ports tree
 DEBUG: autoconf 2.64_0  is the latest installed
 DEBUG: autoconf 2.64_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.36.4_1 exists in the ports tree
 DEBUG: help2man 1.36.4_1  is the latest installed
 DEBUG: help2man 1.36.4_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_0  is the latest installed
 DEBUG: p5-locale-gettext 1.05_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13_0 exists in the ports tree
 DEBUG: libiconv 1.13_0  is the latest installed
 DEBUG: libiconv 1.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
 1.05_0
 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
 DEBUG: No need to upgrade! autoconf 2.64_0 >= autoconf 2.64_0
 DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
 DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmp4v2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libmp4v2 1.5.0.1_0 exists in the ports tree
 DEBUG: libmp4v2 1.5.0.1_0  is the latest installed
 DEBUG: libmp4v2 1.5.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmp4v2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libmp4v2.
 DEBUG: Requested variant i386 is not provided by port libmp4v2.
 DEBUG: Requested variant macosx is not provided by port libmp4v2.
 DEBUG: No need to upgrade! libmp4v2 1.5.0.1_0 >= libmp4v2 1.5.0.1_0
 DEBUG: No need to upgrade! faac 1.28_1 >= faac 1.28_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: faad2 2.6.1_1 exists in the ports tree
 DEBUG: faad2 2.6.1_1 +darwin is the latest installed
 DEBUG: faad2 2.6.1_1 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port faad2.
 DEBUG: Requested variant macosx is not provided by port faad2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! faad2 2.6.1_1 >= faad2 2.6.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: XviD 1.2.2_0 exists in the ports tree
 DEBUG: XviD 1.2.2_0  is the latest installed
 DEBUG: XviD 1.2.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port XviD.
 DEBUG: Requested variant i386 is not provided by port XviD.
 DEBUG: Requested variant macosx is not provided by port XviD.
 DEBUG: No need to upgrade! XviD 1.2.2_0 >= XviD 1.2.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: bzip2 1.0.5_2 exists in the ports tree
 DEBUG: bzip2 1.0.5_2 +darwin is the latest installed
 DEBUG: bzip2 1.0.5_2 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port bzip2.
 DEBUG: Requested variant macosx is not provided by port bzip2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! bzip2 1.0.5_2 >= bzip2 1.0.5_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gmake 3.81_0 exists in the ports tree
 DEBUG: gmake 3.81_0  is the latest installed
 DEBUG: gmake 3.81_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port gmake.
 DEBUG: Requested variant i386 is not provided by port gmake.
 DEBUG: Requested variant macosx is not provided by port gmake.
 DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
 --->  Computing dependencies for ffmpeg
 DEBUG: Searching for dependency: lame
 DEBUG: Found Dependency: receipt exists for lame
 DEBUG: Searching for dependency: libvorbis
 DEBUG: Didn't find receipt, going to depspec regex for: libvorbis
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libvorbis.
 DEBUG: Requested variant i386 is not provided by port libvorbis.
 DEBUG: Requested variant macosx is not provided by port libvorbis.
 DEBUG: Searching for dependency: libogg
 DEBUG: Found Dependency: receipt exists for libogg
 DEBUG: Searching for dependency: libtheora
 DEBUG: Didn't find receipt, going to depspec regex for: libtheora
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libtheora.
 DEBUG: Requested variant i386 is not provided by port libtheora.
 DEBUG: Requested variant macosx is not provided by port libtheora.
 DEBUG: Searching for dependency: dirac
 DEBUG: Found Dependency: receipt exists for dirac
 DEBUG: Searching for dependency: schroedinger
 DEBUG: Didn't find receipt, going to depspec regex for: schroedinger
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port schroedinger.
 DEBUG: Requested variant i386 is not provided by port schroedinger.
 DEBUG: Requested variant macosx is not provided by port schroedinger.
 DEBUG: Searching for dependency: faac
 DEBUG: Found Dependency: receipt exists for faac
 DEBUG: Searching for dependency: faad2
 DEBUG: Found Dependency: receipt exists for faad2
 DEBUG: Searching for dependency: XviD
 DEBUG: Found Dependency: receipt exists for XviD
 DEBUG: Searching for dependency: x264
 DEBUG: Didn't find receipt, going to depspec regex for: x264
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port x264.
 DEBUG: Requested variant i386 is not provided by port x264.
 DEBUG: Requested variant macosx is not provided by port x264.
 DEBUG: Searching for dependency: libsdl
 DEBUG: Didn't find receipt, going to depspec regex for: libsdl
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libsdl.
 DEBUG: Requested variant i386 is not provided by port libsdl.
 DEBUG: Requested variant macosx is not provided by port libsdl.
 DEBUG: Searching for dependency: bzip2
 DEBUG: Found Dependency: receipt exists for bzip2
 DEBUG: Searching for dependency: zlib
 DEBUG: Didn't find receipt, going to depspec regex for: zlib
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: Searching for dependency: gmake
 DEBUG: Found Dependency: receipt exists for gmake
 DEBUG: Searching for dependency: libogg
 DEBUG: Found Dependency: receipt exists for libogg
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: libvorbis
 DEBUG: Didn't find receipt, going to depspec regex for: libvorbis
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
 DEBUG: Searching for dependency: libogg
 DEBUG: Found Dependency: receipt exists for libogg
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: liboil
 DEBUG: Didn't find receipt, going to depspec regex for: liboil
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port liboil.
 DEBUG: Requested variant i386 is not provided by port liboil.
 DEBUG: Requested variant macosx is not provided by port liboil.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: glib2
 DEBUG: Didn't find receipt, going to depspec regex for: glib2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port glib2.
 DEBUG: Requested variant macosx is not provided by port glib2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: perl5
 DEBUG: Found Dependency: receipt exists for perl5
 DEBUG: Searching for dependency: python_select
 DEBUG: Didn't find receipt, going to depspec regex for: python_select
 DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: xorg-libXext
 DEBUG: Found Dependency: receipt exists for xorg-libXext
 DEBUG: Searching for dependency: xorg-libXrandr
 DEBUG: Found Dependency: receipt exists for xorg-libXrandr
 DEBUG: Searching for dependency: xrender
 DEBUG: Found Dependency: receipt exists for xrender
 DEBUG: Executing org.macports.main (libsdl)
 DEBUG: Skipping completed org.macports.fetch (libsdl)
 DEBUG: Skipping completed org.macports.checksum (libsdl)
 DEBUG: Skipping completed org.macports.extract (libsdl)
 DEBUG: Skipping completed org.macports.patch (libsdl)
 DEBUG: Skipping completed org.macports.configure (libsdl)
 --->  Building libsdl
 DEBUG: Executing org.macports.build (libsdl)
 DEBUG: Environment: CPATH='/opt/local/include'
 LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.13"
 && /usr/bin/make -j2 all'
 /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2 -O2 -arch i386
 -I/opt/local/include -I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON
 -DTARGET_API_MAC_OSX -fvisibility=hidden  -I/usr/X11R6/include -DXTHREADS
 -D_THREAD_SAFE -force_cpusubtype_ALL -fpascal-strings -c
 ./src/audio/macosx/SDL_coreaudio.c  -o build/SDL_coreaudio.lo
 /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2 -O2 -arch i386
 -I/opt/local/include -I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON
 -DTARGET_API_MAC_OSX -fvisibility=hidden  -I/usr/X11R6/include -DXTHREADS
 -D_THREAD_SAFE -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c  -o build/SDL_sysjoystick.lo
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/audio/macosx/SDL_coreaudio.c  -fno-common -DPIC -o
 build/.libs/SDL_coreaudio.o
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c  -fno-common -DPIC -o
 build/.libs/SDL_sysjoystick.o
 ./src/audio/macosx/SDL_coreaudio.c:26:37: error:
 AudioUnit/AUNTComponent.h: No such file or directory
 ./src/audio/macosx/SDL_coreaudio.c: In function 'Core_CloseAudio':
 ./src/audio/macosx/SDL_coreaudio.c:162: error: storage size of 'callback'
 isn't known
 ./src/audio/macosx/SDL_coreaudio.c:175: error:
 'kAudioUnitProperty_SetInputCallback' undeclared (first use in this
 function)
 ./src/audio/macosx/SDL_coreaudio.c:175: error: (Each undeclared identifier
 is reported only once
 ./src/audio/macosx/SDL_coreaudio.c:175: error: for each function it
 appears in.)
 ./src/audio/macosx/SDL_coreaudio.c: In function 'Core_OpenAudio':
 ./src/audio/macosx/SDL_coreaudio.c:204: error: 'Component' undeclared
 (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:204: error: expected ';' before 'comp'
 ./src/audio/macosx/SDL_coreaudio.c:205: error: 'ComponentDescription'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:205: error: expected ';' before 'desc'
 ./src/audio/macosx/SDL_coreaudio.c:206: error: storage size of 'callback'
 isn't known
 ./src/audio/macosx/SDL_coreaudio.c:227: error: 'desc' undeclared (first
 use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:227: error: 'kAudioUnitComponentType'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:228: error: 'kAudioUnitSubType_Output'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:229: error:
 'kAudioUnitID_DefaultOutput' undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:233: error: 'comp' undeclared (first
 use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:259: error:
 'kAudioUnitProperty_SetInputCallback' undeclared (first use in this
 function)
 make: *** [build/SDL_coreaudio.lo] Error 1
 make: *** Waiting for unfinished jobs....
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c -o build/SDL_sysjoystick.o
 >/dev/null 2>&1
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.13"
 && /usr/bin/make -j2 all " returned error 2
 Command output: /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2 -O2
 -arch i386 -I/opt/local/include -I./include -D_GNU_SOURCE=1
 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX -fvisibility=hidden
 -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE -force_cpusubtype_ALL
 -fpascal-strings -c ./src/audio/macosx/SDL_coreaudio.c  -o
 build/SDL_coreaudio.lo
 /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2 -O2 -arch i386
 -I/opt/local/include -I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON
 -DTARGET_API_MAC_OSX -fvisibility=hidden  -I/usr/X11R6/include -DXTHREADS
 -D_THREAD_SAFE -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c  -o build/SDL_sysjoystick.lo
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/audio/macosx/SDL_coreaudio.c  -fno-common -DPIC -o
 build/.libs/SDL_coreaudio.o
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c  -fno-common -DPIC -o
 build/.libs/SDL_sysjoystick.o
 ./src/audio/macosx/SDL_coreaudio.c:26:37: error:
 AudioUnit/AUNTComponent.h: No such file or directory
 ./src/audio/macosx/SDL_coreaudio.c: In function 'Core_CloseAudio':
 ./src/audio/macosx/SDL_coreaudio.c:162: error: storage size of 'callback'
 isn't known
 ./src/audio/macosx/SDL_coreaudio.c:175: error:
 'kAudioUnitProperty_SetInputCallback' undeclared (first use in this
 function)
 ./src/audio/macosx/SDL_coreaudio.c:175: error: (Each undeclared identifier
 is reported only once
 ./src/audio/macosx/SDL_coreaudio.c:175: error: for each function it
 appears in.)
 ./src/audio/macosx/SDL_coreaudio.c: In function 'Core_OpenAudio':
 ./src/audio/macosx/SDL_coreaudio.c:204: error: 'Component' undeclared
 (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:204: error: expected ';' before 'comp'
 ./src/audio/macosx/SDL_coreaudio.c:205: error: 'ComponentDescription'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:205: error: expected ';' before 'desc'
 ./src/audio/macosx/SDL_coreaudio.c:206: error: storage size of 'callback'
 isn't known
 ./src/audio/macosx/SDL_coreaudio.c:227: error: 'desc' undeclared (first
 use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:227: error: 'kAudioUnitComponentType'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:228: error: 'kAudioUnitSubType_Output'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:229: error:
 'kAudioUnitID_DefaultOutput' undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:233: error: 'comp' undeclared (first
 use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:259: error:
 'kAudioUnitProperty_SetInputCallback' undeclared (first use in this
 function)
 make: *** [build/SDL_coreaudio.lo] Error 1
 make: *** Waiting for unfinished jobs....
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c -o build/SDL_sysjoystick.o
 >/dev/null 2>&1

 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.13"
 && /usr/bin/make -j2 all " returned error 2
 Command output: /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2 -O2
 -arch i386 -I/opt/local/include -I./include -D_GNU_SOURCE=1
 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX -fvisibility=hidden
 -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE -force_cpusubtype_ALL
 -fpascal-strings -c ./src/audio/macosx/SDL_coreaudio.c  -o
 build/SDL_coreaudio.lo
 /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2 -O2 -arch i386
 -I/opt/local/include -I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON
 -DTARGET_API_MAC_OSX -fvisibility=hidden  -I/usr/X11R6/include -DXTHREADS
 -D_THREAD_SAFE -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c  -o build/SDL_sysjoystick.lo
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/audio/macosx/SDL_coreaudio.c  -fno-common -DPIC -o
 build/.libs/SDL_coreaudio.o
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c  -fno-common -DPIC -o
 build/.libs/SDL_sysjoystick.o
 ./src/audio/macosx/SDL_coreaudio.c:26:37: error:
 AudioUnit/AUNTComponent.h: No such file or directory
 ./src/audio/macosx/SDL_coreaudio.c: In function 'Core_CloseAudio':
 ./src/audio/macosx/SDL_coreaudio.c:162: error: storage size of 'callback'
 isn't known
 ./src/audio/macosx/SDL_coreaudio.c:175: error:
 'kAudioUnitProperty_SetInputCallback' undeclared (first use in this
 function)
 ./src/audio/macosx/SDL_coreaudio.c:175: error: (Each undeclared identifier
 is reported only once
 ./src/audio/macosx/SDL_coreaudio.c:175: error: for each function it
 appears in.)
 ./src/audio/macosx/SDL_coreaudio.c: In function 'Core_OpenAudio':
 ./src/audio/macosx/SDL_coreaudio.c:204: error: 'Component' undeclared
 (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:204: error: expected ';' before 'comp'
 ./src/audio/macosx/SDL_coreaudio.c:205: error: 'ComponentDescription'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:205: error: expected ';' before 'desc'
 ./src/audio/macosx/SDL_coreaudio.c:206: error: storage size of 'callback'
 isn't known
 ./src/audio/macosx/SDL_coreaudio.c:227: error: 'desc' undeclared (first
 use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:227: error: 'kAudioUnitComponentType'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:228: error: 'kAudioUnitSubType_Output'
 undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:229: error:
 'kAudioUnitID_DefaultOutput' undeclared (first use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:233: error: 'comp' undeclared (first
 use in this function)
 ./src/audio/macosx/SDL_coreaudio.c:259: error:
 'kAudioUnitProperty_SetInputCallback' undeclared (first use in this
 function)
 make: *** [build/SDL_coreaudio.lo] Error 1
 make: *** Waiting for unfinished jobs....
  /usr/bin/gcc-4.2 -O2 -arch i386 -I/opt/local/include -I./include
 -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX
 -fvisibility=hidden -I/usr/X11R6/include -DXTHREADS -D_THREAD_SAFE
 -force_cpusubtype_ALL -fpascal-strings -c
 ./src/joystick/darwin/SDL_sysjoystick.c -o build/SDL_sysjoystick.o
 >/dev/null 2>&1

     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for libsdl):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: The following dependencies failed to build: libsdl libtheora
 libvorbis schroedinger liboil glib2 x264 zlib
 Error: Status 1 encountered during processing.
 MacBook-de-admin:~ admin$

-- 
Ticket URL: <http://trac.macports.org/ticket/20703#comment:3>
MacPorts <http://www.macports.org/>
Ports system for Mac OS

More information about the macports-tickets mailing list