[MacPorts] #21357: dsniff-devel 2.4b1_2 fails to build under Leopard

[MacPorts]

#21357: dsniff-devel 2.4b1_2 fails to build under Leopard
---------------------------+------------------------------------------------
 Reporter:  sck@…          |       Owner:  macports-tickets@…                   
     Type:  defect         |      Status:  new                                  
 Priority:  Normal         |   Milestone:                                       
Component:  ports          |     Version:  1.8.0                                
 Keywords:                 |        Port:  dsniff-devel                         
---------------------------+------------------------------------------------
 On my 10.5 system, I run a port upgrade for dsniff-devel and get the error
 shown in debug mode below. I have already tried un-installing libnet11 and
 installing libnet previously....

 Biko-2:distfiles sck$ sudo port -duR upgrade dsniff-devel
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net
 /dsniff-devel
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: dsniff-devel 2.4b1_2 exists in the ports tree
 DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is the latest installed
 DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is active
 DEBUG: Merging existing variants darwin_9 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net
 /dsniff-devel
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port dsniff-devel.
 DEBUG: Requested variant i386 is not provided by port dsniff-devel.
 DEBUG: Requested variant macosx is not provided by port dsniff-devel.
 DEBUG: Executing variant darwin_9 provides darwin_9
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libnids 1.23_2 exists in the ports tree
 DEBUG: libnids 1.23_2  is the latest installed
 DEBUG: libnids 1.23_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libnids.
 DEBUG: Requested variant i386 is not provided by port libnids.
 DEBUG: Requested variant macosx is not provided by port libnids.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpcap 1.0.0_0 exists in the ports tree
 DEBUG: libpcap 1.0.0_0  is the latest installed
 DEBUG: libpcap 1.0.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libpcap.
 DEBUG: Requested variant i386 is not provided by port libpcap.
 DEBUG: Requested variant macosx is not provided by port libpcap.
 DEBUG: No need to upgrade! libpcap 1.0.0_0 >= libpcap 1.0.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libnet11 1.1.4_0 exists in the ports tree
 DEBUG: libnet11 1.1.4_0  is the latest installed
 DEBUG: libnet11 1.1.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libnet11.
 DEBUG: Requested variant i386 is not provided by port libnet11.
 DEBUG: Requested variant macosx is not provided by port libnet11.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.64_2 exists in the ports tree
 DEBUG: autoconf 2.64_2  is the latest installed
 DEBUG: autoconf 2.64_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.36.4_1 exists in the ports tree
 DEBUG: help2man 1.36.4_1  is the latest installed
 DEBUG: help2man 1.36.4_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_0  is the latest installed
 DEBUG: p5-locale-gettext 1.05_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13_0 exists in the ports tree
 DEBUG: libiconv 1.13_0  is the latest installed
 DEBUG: libiconv 1.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0  is the latest installed
 DEBUG: ncurses 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0  is the latest installed
 DEBUG: ncursesw 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
 1.05_0
 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
 DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11_0 exists in the ports tree
 DEBUG: automake 1.11_0  is the latest installed
 DEBUG: automake 1.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6a_0 exists in the ports tree
 DEBUG: libtool 2.2.6a_0  is the latest installed
 DEBUG: libtool 2.2.6a_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
 DEBUG: No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0
 DEBUG: No need to upgrade! libnids 1.23_2 >= libnids 1.23_2
 DEBUG: Attempting ln -sf
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dsniff-devel/work
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net
 /dsniff-devel/work
 --->  Computing dependencies for dsniff-devel
 DEBUG: Searching for dependency: libpcap
 DEBUG: Found Dependency: receipt exists for libpcap
 DEBUG: Searching for dependency: libnids
 DEBUG: Found Dependency: receipt exists for libnids
 DEBUG: Executing org.macports.main (dsniff-devel)
 DEBUG: Skipping completed org.macports.fetch (dsniff-devel)
 DEBUG: Skipping completed org.macports.checksum (dsniff-devel)
 DEBUG: Skipping completed org.macports.extract (dsniff-devel)
 DEBUG: Skipping completed org.macports.patch (dsniff-devel)
 DEBUG: Skipping completed org.macports.configure (dsniff-devel)
 --->  Building dsniff-devel
 DEBUG: Executing org.macports.build (dsniff-devel)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
 all'
 /usr/bin/gcc-4.0 -L/opt/local/lib -o arpspoof arpspoof.o arp.o -lresolv
 -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
 /usr/bin/gcc-4.0 -L/opt/local/lib -o dnsspoof dnsspoof.o pcaputil.o
 -lresolv  -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
 Undefined symbols:
   "_libnet_open_link_interface", referenced from:
       _main in arpspoof.o
   "_libnet_write_link_layer", referenced from:
       _arp_send in arpspoof.o
   "_libnet_host_lookup", referenced from:
       _arp_send in arpspoof.o
       _arp_send in arpspoof.o
       _arp_send in arpspoof.o
       _main in arpspoof.o
   "_libnet_name_resolve", referenced from:
       _main in arpspoof.o
       _main in arpspoof.o
   "_libnet_get_ipaddr", referenced from:
       _arp_send in arpspoof.o
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 Undefined symbols:
   "_libnet_build_ip", referenced from:
       _dns_spoof in dnsspoof.o
   "_libnet_write_ip", referenced from:
       _dns_spoof in dnsspoof.o
   "_libnet_close_raw_sock", referenced from:
       _cleanup in dnsspoof.o
   "_libnet_open_raw_sock", referenced from:
       _main in dnsspoof.o
   "_libnet_open_link_interface", referenced from:
       _main in dnsspoof.o
   "_libnet_close_link_interface", referenced from:
       _main in dnsspoof.o
   "_libnet_host_lookup", referenced from:
       _main in dnsspoof.o
       _dns_spoof in dnsspoof.o
       _dns_spoof in dnsspoof.o
   "_libnet_get_ipaddr", referenced from:
       _main in dnsspoof.o
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 make: *** [arpspoof] Error 1
 make: *** Waiting for unfinished jobs....
 make: *** [dnsspoof] Error 1
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
 all " returned error 2
 Command output:       _main in arpspoof.o
       _main in arpspoof.o
   "_libnet_get_ipaddr", referenced from:
       _arp_send in arpspoof.o
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 Undefined symbols:
   "_libnet_build_ip", referenced from:
       _dns_spoof in dnsspoof.o
   "_libnet_write_ip", referenced from:
       _dns_spoof in dnsspoof.o
   "_libnet_close_raw_sock", referenced from:
       _cleanup in dnsspoof.o
   "_libnet_open_raw_sock", referenced from:
       _main in dnsspoof.o
   "_libnet_open_link_interface", referenced from:
       _main in dnsspoof.o
   "_libnet_close_link_interface", referenced from:
       _main in dnsspoof.o
   "_libnet_host_lookup", referenced from:
       _main in dnsspoof.o
       _dns_spoof in dnsspoof.o
       _dns_spoof in dnsspoof.o
   "_libnet_get_ipaddr", referenced from:
       _main in dnsspoof.o
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 make: *** [arpspoof] Error 1
 make: *** Waiting for unfinished jobs....
 make: *** [dnsspoof] Error 1

 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
 all " returned error 2
 Command output:       _main in arpspoof.o
       _main in arpspoof.o
   "_libnet_get_ipaddr", referenced from:
       _arp_send in arpspoof.o
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 Undefined symbols:
   "_libnet_build_ip", referenced from:
       _dns_spoof in dnsspoof.o
   "_libnet_write_ip", referenced from:
       _dns_spoof in dnsspoof.o
   "_libnet_close_raw_sock", referenced from:
       _cleanup in dnsspoof.o
   "_libnet_open_raw_sock", referenced from:
       _main in dnsspoof.o
   "_libnet_open_link_interface", referenced from:
       _main in dnsspoof.o
   "_libnet_close_link_interface", referenced from:
       _main in dnsspoof.o
   "_libnet_host_lookup", referenced from:
       _main in dnsspoof.o
       _dns_spoof in dnsspoof.o
       _dns_spoof in dnsspoof.o
   "_libnet_get_ipaddr", referenced from:
       _main in dnsspoof.o
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 make: *** [arpspoof] Error 1
 make: *** Waiting for unfinished jobs....
 make: *** [dnsspoof] Error 1

     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for dsniff-devel):
 org.macports.destroot org.macports.build
 DEBUG: couldn't read file
 "/opt/local/share/macports/Tcl/darwintrace1.0/pkgIndex.tcl": no such file
 or directory
     while executing
 "source [file join $dir pkgIndex.tcl]"
 Error: Unable to upgrade port: 1

-- 
Ticket URL: <http://trac.macports.org/ticket/21357>
MacPorts <http://www.macports.org/>
Ports system for Mac OS