[MacPorts] #21357: dsniff-devel 2.4b1_2 fails to build under Leopard
MacPorts
noreply at macports.org
Sun Sep 13 23:41:19 PDT 2009
#21357: dsniff-devel 2.4b1_2 fails to build under Leopard
---------------------------+------------------------------------------------
Reporter: sck@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.0
Keywords: | Port: dsniff-devel
---------------------------+------------------------------------------------
Description changed by blb@…:
Old description:
> On my 10.5 system, I run a port upgrade for dsniff-devel and get the
> error shown in debug mode below. I have already tried un-installing
> libnet11 and installing libnet previously....
>
> Biko-2:distfiles sck$ sudo port -duR upgrade dsniff-devel
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net
> /dsniff-devel
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: dsniff-devel 2.4b1_2 exists in the ports tree
> DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is the latest installed
> DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is active
> DEBUG: Merging existing variants darwin_9 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net
> /dsniff-devel
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port dsniff-devel.
> DEBUG: Requested variant i386 is not provided by port dsniff-devel.
> DEBUG: Requested variant macosx is not provided by port dsniff-devel.
> DEBUG: Executing variant darwin_9 provides darwin_9
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libnids 1.23_2 exists in the ports tree
> DEBUG: libnids 1.23_2 is the latest installed
> DEBUG: libnids 1.23_2 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libnids.
> DEBUG: Requested variant i386 is not provided by port libnids.
> DEBUG: Requested variant macosx is not provided by port libnids.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libpcap 1.0.0_0 exists in the ports tree
> DEBUG: libpcap 1.0.0_0 is the latest installed
> DEBUG: libpcap 1.0.0_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libpcap.
> DEBUG: Requested variant i386 is not provided by port libpcap.
> DEBUG: Requested variant macosx is not provided by port libpcap.
> DEBUG: No need to upgrade! libpcap 1.0.0_0 >= libpcap 1.0.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libnet11 1.1.4_0 exists in the ports tree
> DEBUG: libnet11 1.1.4_0 is the latest installed
> DEBUG: libnet11 1.1.4_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libnet11.
> DEBUG: Requested variant i386 is not provided by port libnet11.
> DEBUG: Requested variant macosx is not provided by port libnet11.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf 2.64_2 exists in the ports tree
> DEBUG: autoconf 2.64_2 is the latest installed
> DEBUG: autoconf 2.64_2 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port autoconf.
> DEBUG: Requested variant i386 is not provided by port autoconf.
> DEBUG: Requested variant macosx is not provided by port autoconf.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.8.9_0 exists in the ports tree
> DEBUG: perl5 5.8.9_0 is the latest installed
> DEBUG: perl5 5.8.9_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.
> DEBUG: Requested variant i386 is not provided by port perl5.
> DEBUG: Requested variant macosx is not provided by port perl5.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.8 5.8.9_3 exists in the ports tree
> DEBUG: perl5.8 5.8.9_3 is the latest installed
> DEBUG: perl5.8 5.8.9_3 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.8.
> DEBUG: Requested variant i386 is not provided by port perl5.8.
> DEBUG: Requested variant macosx is not provided by port perl5.8.
> DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: m4 1.4.13_0 exists in the ports tree
> DEBUG: m4 1.4.13_0 is the latest installed
> DEBUG: m4 1.4.13_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port m4.
> DEBUG: Requested variant i386 is not provided by port m4.
> DEBUG: Requested variant macosx is not provided by port m4.
> DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: help2man 1.36.4_1 exists in the ports tree
> DEBUG: help2man 1.36.4_1 is the latest installed
> DEBUG: help2man 1.36.4_1 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port help2man.
> DEBUG: Requested variant i386 is not provided by port help2man.
> DEBUG: Requested variant macosx is not provided by port help2man.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
> DEBUG: p5-locale-gettext 1.05_0 is the latest installed
> DEBUG: p5-locale-gettext 1.05_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-locale-
> gettext.
> DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
> DEBUG: Requested variant macosx is not provided by port p5-locale-
> gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4 is the latest installed
> DEBUG: gettext 0.17_4 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant i386 is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13_0 exists in the ports tree
> DEBUG: libiconv 1.13_0 is the latest installed
> DEBUG: libiconv 1.13_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant i386 is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0 is the latest installed
> DEBUG: gperf 3.0.4_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant i386 is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0 is the latest installed
> DEBUG: ncurses 5.7_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant i386 is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0 is the latest installed
> DEBUG: ncursesw 5.7_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant i386 is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0 is the latest installed
> DEBUG: expat 2.0.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant i386 is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
> 1.05_0
> DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
> DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automake 1.11_0 exists in the ports tree
> DEBUG: automake 1.11_0 is the latest installed
> DEBUG: automake 1.11_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port automake.
> DEBUG: Requested variant i386 is not provided by port automake.
> DEBUG: Requested variant macosx is not provided by port automake.
> DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtool 2.2.6a_0 exists in the ports tree
> DEBUG: libtool 2.2.6a_0 is the latest installed
> DEBUG: libtool 2.2.6a_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libtool.
> DEBUG: Requested variant i386 is not provided by port libtool.
> DEBUG: Requested variant macosx is not provided by port libtool.
> DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
> DEBUG: No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0
> DEBUG: No need to upgrade! libnids 1.23_2 >= libnids 1.23_2
> DEBUG: Attempting ln -sf
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_net_dsniff-devel/work
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net
> /dsniff-devel/work
> ---> Computing dependencies for dsniff-devel
> DEBUG: Searching for dependency: libpcap
> DEBUG: Found Dependency: receipt exists for libpcap
> DEBUG: Searching for dependency: libnids
> DEBUG: Found Dependency: receipt exists for libnids
> DEBUG: Executing org.macports.main (dsniff-devel)
> DEBUG: Skipping completed org.macports.fetch (dsniff-devel)
> DEBUG: Skipping completed org.macports.checksum (dsniff-devel)
> DEBUG: Skipping completed org.macports.extract (dsniff-devel)
> DEBUG: Skipping completed org.macports.patch (dsniff-devel)
> DEBUG: Skipping completed org.macports.configure (dsniff-devel)
> ---> Building dsniff-devel
> DEBUG: Executing org.macports.build (dsniff-devel)
> DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
> all'
> /usr/bin/gcc-4.0 -L/opt/local/lib -o arpspoof arpspoof.o arp.o -lresolv
> -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
> /usr/bin/gcc-4.0 -L/opt/local/lib -o dnsspoof dnsspoof.o pcaputil.o
> -lresolv -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
> Undefined symbols:
> "_libnet_open_link_interface", referenced from:
> _main in arpspoof.o
> "_libnet_write_link_layer", referenced from:
> _arp_send in arpspoof.o
> "_libnet_host_lookup", referenced from:
> _arp_send in arpspoof.o
> _arp_send in arpspoof.o
> _arp_send in arpspoof.o
> _main in arpspoof.o
> "_libnet_name_resolve", referenced from:
> _main in arpspoof.o
> _main in arpspoof.o
> "_libnet_get_ipaddr", referenced from:
> _arp_send in arpspoof.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> Undefined symbols:
> "_libnet_build_ip", referenced from:
> _dns_spoof in dnsspoof.o
> "_libnet_write_ip", referenced from:
> _dns_spoof in dnsspoof.o
> "_libnet_close_raw_sock", referenced from:
> _cleanup in dnsspoof.o
> "_libnet_open_raw_sock", referenced from:
> _main in dnsspoof.o
> "_libnet_open_link_interface", referenced from:
> _main in dnsspoof.o
> "_libnet_close_link_interface", referenced from:
> _main in dnsspoof.o
> "_libnet_host_lookup", referenced from:
> _main in dnsspoof.o
> _dns_spoof in dnsspoof.o
> _dns_spoof in dnsspoof.o
> "_libnet_get_ipaddr", referenced from:
> _main in dnsspoof.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make: *** [arpspoof] Error 1
> make: *** Waiting for unfinished jobs....
> make: *** [dnsspoof] Error 1
> Error: Target org.macports.build returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
> all " returned error 2
> Command output: _main in arpspoof.o
> _main in arpspoof.o
> "_libnet_get_ipaddr", referenced from:
> _arp_send in arpspoof.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> Undefined symbols:
> "_libnet_build_ip", referenced from:
> _dns_spoof in dnsspoof.o
> "_libnet_write_ip", referenced from:
> _dns_spoof in dnsspoof.o
> "_libnet_close_raw_sock", referenced from:
> _cleanup in dnsspoof.o
> "_libnet_open_raw_sock", referenced from:
> _main in dnsspoof.o
> "_libnet_open_link_interface", referenced from:
> _main in dnsspoof.o
> "_libnet_close_link_interface", referenced from:
> _main in dnsspoof.o
> "_libnet_host_lookup", referenced from:
> _main in dnsspoof.o
> _dns_spoof in dnsspoof.o
> _dns_spoof in dnsspoof.o
> "_libnet_get_ipaddr", referenced from:
> _main in dnsspoof.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make: *** [arpspoof] Error 1
> make: *** Waiting for unfinished jobs....
> make: *** [dnsspoof] Error 1
>
> DEBUG: Backtrace: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
> all " returned error 2
> Command output: _main in arpspoof.o
> _main in arpspoof.o
> "_libnet_get_ipaddr", referenced from:
> _arp_send in arpspoof.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> Undefined symbols:
> "_libnet_build_ip", referenced from:
> _dns_spoof in dnsspoof.o
> "_libnet_write_ip", referenced from:
> _dns_spoof in dnsspoof.o
> "_libnet_close_raw_sock", referenced from:
> _cleanup in dnsspoof.o
> "_libnet_open_raw_sock", referenced from:
> _main in dnsspoof.o
> "_libnet_open_link_interface", referenced from:
> _main in dnsspoof.o
> "_libnet_close_link_interface", referenced from:
> _main in dnsspoof.o
> "_libnet_host_lookup", referenced from:
> _main in dnsspoof.o
> _dns_spoof in dnsspoof.o
> _dns_spoof in dnsspoof.o
> "_libnet_get_ipaddr", referenced from:
> _main in dnsspoof.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make: *** [arpspoof] Error 1
> make: *** Waiting for unfinished jobs....
> make: *** [dnsspoof] Error 1
>
> while executing
> "command_exec build"
> (procedure "portbuild::build_main" line 9)
> invoked from within
> "$procedure $targetname"
> Warning: the following items did not execute (for dsniff-devel):
> org.macports.destroot org.macports.build
> DEBUG: couldn't read file
> "/opt/local/share/macports/Tcl/darwintrace1.0/pkgIndex.tcl": no such file
> or directory
> while executing
> "source [file join $dir pkgIndex.tcl]"
> Error: Unable to upgrade port: 1
New description:
On my 10.5 system, I run a port upgrade for dsniff-devel and get the error
shown in debug mode below. I have already tried un-installing libnet11 and
installing libnet previously....
{{{
Biko-2:distfiles sck$ sudo port -duR upgrade dsniff-devel
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net
/dsniff-devel
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dsniff-devel 2.4b1_2 exists in the ports tree
DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is the latest installed
DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is active
DEBUG: Merging existing variants darwin_9 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net
/dsniff-devel
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port dsniff-devel.
DEBUG: Requested variant i386 is not provided by port dsniff-devel.
DEBUG: Requested variant macosx is not provided by port dsniff-devel.
DEBUG: Executing variant darwin_9 provides darwin_9
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libnids 1.23_2 exists in the ports tree
DEBUG: libnids 1.23_2 is the latest installed
DEBUG: libnids 1.23_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libnids.
DEBUG: Requested variant i386 is not provided by port libnids.
DEBUG: Requested variant macosx is not provided by port libnids.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpcap 1.0.0_0 exists in the ports tree
DEBUG: libpcap 1.0.0_0 is the latest installed
DEBUG: libpcap 1.0.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libpcap.
DEBUG: Requested variant i386 is not provided by port libpcap.
DEBUG: Requested variant macosx is not provided by port libpcap.
DEBUG: No need to upgrade! libpcap 1.0.0_0 >= libpcap 1.0.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libnet11 1.1.4_0 exists in the ports tree
DEBUG: libnet11 1.1.4_0 is the latest installed
DEBUG: libnet11 1.1.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libnet11.
DEBUG: Requested variant i386 is not provided by port libnet11.
DEBUG: Requested variant macosx is not provided by port libnet11.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.64_2 exists in the ports tree
DEBUG: autoconf 2.64_2 is the latest installed
DEBUG: autoconf 2.64_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0 is the latest installed
DEBUG: m4 1.4.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1 is the latest installed
DEBUG: help2man 1.36.4_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0 is the latest installed
DEBUG: p5-locale-gettext 1.05_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0 is the latest installed
DEBUG: libiconv 1.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 is the latest installed
DEBUG: ncurses 5.7_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 is the latest installed
DEBUG: ncursesw 5.7_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11_0 exists in the ports tree
DEBUG: automake 1.11_0 is the latest installed
DEBUG: automake 1.11_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6a_0 exists in the ports tree
DEBUG: libtool 2.2.6a_0 is the latest installed
DEBUG: libtool 2.2.6a_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
DEBUG: No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0
DEBUG: No need to upgrade! libnids 1.23_2 >= libnids 1.23_2
DEBUG: Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_net_dsniff-devel/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net
/dsniff-devel/work
---> Computing dependencies for dsniff-devel
DEBUG: Searching for dependency: libpcap
DEBUG: Found Dependency: receipt exists for libpcap
DEBUG: Searching for dependency: libnids
DEBUG: Found Dependency: receipt exists for libnids
DEBUG: Executing org.macports.main (dsniff-devel)
DEBUG: Skipping completed org.macports.fetch (dsniff-devel)
DEBUG: Skipping completed org.macports.checksum (dsniff-devel)
DEBUG: Skipping completed org.macports.extract (dsniff-devel)
DEBUG: Skipping completed org.macports.patch (dsniff-devel)
DEBUG: Skipping completed org.macports.configure (dsniff-devel)
---> Building dsniff-devel
DEBUG: Executing org.macports.build (dsniff-devel)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
all'
/usr/bin/gcc-4.0 -L/opt/local/lib -o arpspoof arpspoof.o arp.o -lresolv
-L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
/usr/bin/gcc-4.0 -L/opt/local/lib -o dnsspoof dnsspoof.o pcaputil.o
-lresolv -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet
Undefined symbols:
"_libnet_open_link_interface", referenced from:
_main in arpspoof.o
"_libnet_write_link_layer", referenced from:
_arp_send in arpspoof.o
"_libnet_host_lookup", referenced from:
_arp_send in arpspoof.o
_arp_send in arpspoof.o
_arp_send in arpspoof.o
_main in arpspoof.o
"_libnet_name_resolve", referenced from:
_main in arpspoof.o
_main in arpspoof.o
"_libnet_get_ipaddr", referenced from:
_arp_send in arpspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
Undefined symbols:
"_libnet_build_ip", referenced from:
_dns_spoof in dnsspoof.o
"_libnet_write_ip", referenced from:
_dns_spoof in dnsspoof.o
"_libnet_close_raw_sock", referenced from:
_cleanup in dnsspoof.o
"_libnet_open_raw_sock", referenced from:
_main in dnsspoof.o
"_libnet_open_link_interface", referenced from:
_main in dnsspoof.o
"_libnet_close_link_interface", referenced from:
_main in dnsspoof.o
"_libnet_host_lookup", referenced from:
_main in dnsspoof.o
_dns_spoof in dnsspoof.o
_dns_spoof in dnsspoof.o
"_libnet_get_ipaddr", referenced from:
_main in dnsspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make: *** [arpspoof] Error 1
make: *** Waiting for unfinished jobs....
make: *** [dnsspoof] Error 1
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
all " returned error 2
Command output: _main in arpspoof.o
_main in arpspoof.o
"_libnet_get_ipaddr", referenced from:
_arp_send in arpspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
Undefined symbols:
"_libnet_build_ip", referenced from:
_dns_spoof in dnsspoof.o
"_libnet_write_ip", referenced from:
_dns_spoof in dnsspoof.o
"_libnet_close_raw_sock", referenced from:
_cleanup in dnsspoof.o
"_libnet_open_raw_sock", referenced from:
_main in dnsspoof.o
"_libnet_open_link_interface", referenced from:
_main in dnsspoof.o
"_libnet_close_link_interface", referenced from:
_main in dnsspoof.o
"_libnet_host_lookup", referenced from:
_main in dnsspoof.o
_dns_spoof in dnsspoof.o
_dns_spoof in dnsspoof.o
"_libnet_get_ipaddr", referenced from:
_main in dnsspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make: *** [arpspoof] Error 1
make: *** Waiting for unfinished jobs....
make: *** [dnsspoof] Error 1
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2
all " returned error 2
Command output: _main in arpspoof.o
_main in arpspoof.o
"_libnet_get_ipaddr", referenced from:
_arp_send in arpspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
Undefined symbols:
"_libnet_build_ip", referenced from:
_dns_spoof in dnsspoof.o
"_libnet_write_ip", referenced from:
_dns_spoof in dnsspoof.o
"_libnet_close_raw_sock", referenced from:
_cleanup in dnsspoof.o
"_libnet_open_raw_sock", referenced from:
_main in dnsspoof.o
"_libnet_open_link_interface", referenced from:
_main in dnsspoof.o
"_libnet_close_link_interface", referenced from:
_main in dnsspoof.o
"_libnet_host_lookup", referenced from:
_main in dnsspoof.o
_dns_spoof in dnsspoof.o
_dns_spoof in dnsspoof.o
"_libnet_get_ipaddr", referenced from:
_main in dnsspoof.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make: *** [arpspoof] Error 1
make: *** Waiting for unfinished jobs....
make: *** [dnsspoof] Error 1
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for dsniff-devel):
org.macports.destroot org.macports.build
DEBUG: couldn't read file
"/opt/local/share/macports/Tcl/darwintrace1.0/pkgIndex.tcl": no such file
or directory
while executing
"source [file join $dir pkgIndex.tcl]"
Error: Unable to upgrade port: 1
}}}
--
--
Ticket URL: <http://trac.macports.org/ticket/21357#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list