[MacPorts] #22731: py26-numpy built for wrong archs

MacPorts noreply at macports.org
Sat Jan 2 14:15:23 PST 2010


#22731: py26-numpy built for wrong archs
----------------------------+-----------------------------------------------
 Reporter:  jls@…           |       Owner:  mcalhoun@…           
     Type:  defect          |      Status:  new                  
 Priority:  Normal          |   Milestone:                       
Component:  ports           |     Version:  1.8.1                
 Keywords:                  |        Port:  py26-numpy           
----------------------------+-----------------------------------------------

Comment(by motya@…):

 Hello!
 I have troubles installing numpy too.
 This happened during install of gnome (I repeated install of py26-numpy
 with -d flag):

 {{{
 MacBook-Pro-Olexandr-Matasov:mono root# port -d install py26-numpy
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port py26-numpy.
 DEBUG: Requested variant admin is not provided by port py26-numpy.
 DEBUG: Requested variant i386 is not provided by port py26-numpy.
 DEBUG: Requested variant macosx is not provided by port py26-numpy.
 DEBUG: Requested variant internal_dependencies is not provided by port
 py26-numpy.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: python26 2.6.4_0 exists in the ports tree
 DEBUG: python26 2.6.4_0 +darwin+universal is the latest installed
 DEBUG: python26 2.6.4_0 +darwin+universal is active
 DEBUG: Merging existing variants darwin universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port python26.
 DEBUG: Requested variant macosx is not provided by port python26.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4 +universal is the latest installed
 DEBUG: gettext 0.17_4 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13_0 exists in the ports tree
 DEBUG: libiconv 1.13_0 +universal is the latest installed
 DEBUG: libiconv 1.13_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0 +universal is the latest installed
 DEBUG: gperf 3.0.4_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10+universal is active
 DEBUG: Merging existing variants darwin_10 universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10+universal is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
 DEBUG: Merging existing variants darwin_10 universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0 +universal is the latest installed
 DEBUG: expat 2.0.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.3_3 exists in the ports tree
 DEBUG: zlib 1.2.3_3 +universal is the latest installed
 DEBUG: zlib 1.2.3_3 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: openssl 0.9.8l_0 exists in the ports tree
 DEBUG: openssl 0.9.8l_0 +darwin+universal is the latest installed
 DEBUG: openssl 0.9.8l_0 +darwin+universal is active
 DEBUG: Merging existing variants darwin universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port openssl.
 DEBUG: Requested variant macosx is not provided by port openssl.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tk 8.5.8_0 exists in the ports tree
 DEBUG: tk 8.5.8_0 +darwin+universal is the latest installed
 DEBUG: tk 8.5.8_0 +darwin+universal is active
 DEBUG: Merging existing variants darwin universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port tk.
 DEBUG: Requested variant macosx is not provided by port tk.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1 +universal is the latest installed
 DEBUG: pkgconfig 0.23_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tcl 8.5.8_0 exists in the ports tree
 DEBUG: tcl 8.5.8_0 +darwin+universal is the latest installed
 DEBUG: tcl 8.5.8_0 +darwin+universal is active
 DEBUG: Merging existing variants darwin universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port tcl.
 DEBUG: Requested variant macosx is not provided by port tcl.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: Xft2 2.1.14_0 exists in the ports tree
 DEBUG: Xft2 2.1.14_0 +universal is the latest installed
 DEBUG: Xft2 2.1.14_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port Xft2.
 DEBUG: Requested variant i386 is not provided by port Xft2.
 DEBUG: Requested variant macosx is not provided by port Xft2.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.5_0 exists in the ports tree
 DEBUG: xrender 0.9.5_0 +universal is the latest installed
 DEBUG: xrender 0.9.5_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xrender.
 DEBUG: Requested variant i386 is not provided by port xrender.
 DEBUG: Requested variant macosx is not provided by port xrender.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.11_0  is the latest installed
 DEBUG: xorg-renderproto 0.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
 DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
 DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
 DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
 0.11_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.2_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.2_0 +universal is the latest installed
 DEBUG: xorg-libX11 1.3.2_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.4.1_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.4.1_0  is the latest installed
 DEBUG: xorg-util-macros 1.4.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.4.1_0 >= xorg-util-macros
 1.4.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: groff 1.20.1_1 exists in the ports tree
 DEBUG: groff 1.20.1_1 +universal is the latest installed
 DEBUG: groff 1.20.1_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port groff.
 DEBUG: Requested variant i386 is not provided by port groff.
 DEBUG: Requested variant macosx is not provided by port groff.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0 +universal is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0 +universal is the latest installed
 DEBUG: xorg-libXau 1.0.5_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.2_0 >= xorg-libX11 1.3.2_0
 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.3.11_1 exists in the ports tree
 DEBUG: freetype 2.3.11_1 +macosx+universal is the latest installed
 DEBUG: freetype 2.3.11_1 +macosx+universal is active
 DEBUG: Merging existing variants macosx universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port freetype.
 DEBUG: Requested variant i386 is not provided by port freetype.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant macosx provides macosx
 DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fontconfig 2.8.0_0 exists in the ports tree
 DEBUG: fontconfig 2.8.0_0 +macosx+universal is the latest installed
 DEBUG: fontconfig 2.8.0_0 +macosx+universal is active
 DEBUG: Merging existing variants macosx universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port fontconfig.
 DEBUG: Requested variant i386 is not provided by port fontconfig.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant macosx provides macosx
 DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
 DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXScrnSaver
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
 DEBUG: xorg-libXScrnSaver 1.2.0_0 +universal is the latest installed
 DEBUG: xorg-libXScrnSaver 1.2.0_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXScrnSaver
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-
 libXScrnSaver.
 DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
 DEBUG: Requested variant macosx is not provided by port xorg-
 libXScrnSaver.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libXext 1.1.1_0 +universal is the latest installed
 DEBUG: xorg-libXext 1.1.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXext.
 DEBUG: Requested variant i386 is not provided by port xorg-libXext.
 DEBUG: Requested variant macosx is not provided by port xorg-libXext.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-scrnsaverproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
 DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 scrnsaverproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 scrnsaverproto.
 DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 scrnsaverproto.
 DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-
 scrnsaverproto 1.2.0_0
 DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-
 libXScrnSaver 1.2.0_0
 DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: sqlite3 3.6.21_0 exists in the ports tree
 DEBUG: sqlite3 3.6.21_0 +universal is the latest installed
 DEBUG: sqlite3 3.6.21_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port sqlite3.
 DEBUG: Requested variant i386 is not provided by port sqlite3.
 DEBUG: Requested variant macosx is not provided by port sqlite3.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: readline 6.0.000_2 exists in the ports tree
 DEBUG: readline 6.0.000_2 +darwin+universal is the latest installed
 DEBUG: readline 6.0.000_2 +darwin+universal is active
 DEBUG: Merging existing variants darwin universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port readline.
 DEBUG: Requested variant macosx is not provided by port readline.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2
 DEBUG: No need to upgrade! sqlite3 3.6.21_0 >= sqlite3 3.6.21_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: db46 4.6.21_6 exists in the ports tree
 DEBUG: db46 4.6.21_6 +universal is the latest installed
 DEBUG: db46 4.6.21_6 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port db46.
 DEBUG: Requested variant i386 is not provided by port db46.
 DEBUG: Requested variant macosx is not provided by port db46.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gdbm 1.8.3_2 exists in the ports tree
 DEBUG: gdbm 1.8.3_2 +universal is the latest installed
 DEBUG: gdbm 1.8.3_2 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gdbm.
 DEBUG: Requested variant i386 is not provided by port gdbm.
 DEBUG: Requested variant macosx is not provided by port gdbm.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: bzip2 1.0.5_3 exists in the ports tree
 DEBUG: bzip2 1.0.5_3 +darwin+universal is the latest installed
 DEBUG: bzip2 1.0.5_3 +darwin+universal is active
 DEBUG: Merging existing variants darwin universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port bzip2.
 DEBUG: Requested variant macosx is not provided by port bzip2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
 DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fftw-3 3.2.2_0 exists in the ports tree
 DEBUG: fftw-3 3.2.2_0 +i386 is the latest installed
 DEBUG: fftw-3 3.2.2_0 +i386 is active
 DEBUG: Merging existing variants i386 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port fftw-3.
 DEBUG: Requested variant macosx is not provided by port fftw-3.
 DEBUG: Executing variant i386 provides i386
 DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py26-nose 0.11.1_0 exists in the ports tree
 DEBUG: py26-nose 0.11.1_0  is the latest installed
 DEBUG: py26-nose 0.11.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port py26-nose.
 DEBUG: Requested variant i386 is not provided by port py26-nose.
 DEBUG: Requested variant macosx is not provided by port py26-nose.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py26-setuptools 0.6c11_0 exists in the ports tree
 DEBUG: py26-setuptools 0.6c11_0  is the latest installed
 DEBUG: py26-setuptools 0.6c11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port py26-setuptools.
 DEBUG: Requested variant i386 is not provided by port py26-setuptools.
 DEBUG: Requested variant macosx is not provided by port py26-setuptools.
 DEBUG: No need to upgrade! py26-setuptools 0.6c11_0 >= py26-setuptools
 0.6c11_0
 DEBUG: No need to upgrade! py26-nose 0.11.1_0 >= py26-nose 0.11.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: atlas 3.8.3_1 exists in the ports tree
 DEBUG: atlas 3.8.3_1  is the latest installed
 DEBUG: atlas 3.8.3_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port atlas.
 DEBUG: Requested variant i386 is not provided by port atlas.
 DEBUG: Requested variant macosx is not provided by port atlas.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gcc43 4.3.4_0 exists in the ports tree
 DEBUG: gcc43 4.3.4_0  is the latest installed
 DEBUG: gcc43 4.3.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port gcc43.
 DEBUG: Requested variant i386 is not provided by port gcc43.
 DEBUG: Requested variant macosx is not provided by port gcc43.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gmp 4.3.1_1 exists in the ports tree
 DEBUG: gmp 4.3.1_1  is the latest installed
 DEBUG: gmp 4.3.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gmp.
 DEBUG: Requested variant i386 is not provided by port gmp.
 DEBUG: Requested variant macosx is not provided by port gmp.
 DEBUG: No need to upgrade! gmp 4.3.1_1 >= gmp 4.3.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree
 DEBUG: mpfr 2.4.2-p1_0  is the latest installed
 DEBUG: mpfr 2.4.2-p1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port mpfr.
 DEBUG: Requested variant i386 is not provided by port mpfr.
 DEBUG: Requested variant macosx is not provided by port mpfr.
 DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0
 DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gzip 1.3.12_0 exists in the ports tree
 DEBUG: gzip 1.3.12_0 +universal is the latest installed
 DEBUG: gzip 1.3.12_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port gzip.
 DEBUG: Requested variant i386 is not provided by port gzip.
 DEBUG: Requested variant macosx is not provided by port gzip.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! gzip 1.3.12_0 >= gzip 1.3.12_0
 DEBUG: No need to upgrade! atlas 3.8.3_1 >= atlas 3.8.3_1
 --->  Computing dependencies for py26-numpy
 DEBUG: Searching for dependency: python26
 DEBUG: Found Dependency: receipt exists for python26
 DEBUG: Searching for dependency: fftw-3
 DEBUG: Found Dependency: receipt exists for fftw-3
 DEBUG: Searching for dependency: py26-nose
 DEBUG: Found Dependency: receipt exists for py26-nose
 DEBUG: Searching for dependency: atlas
 DEBUG: Found Dependency: receipt exists for atlas
 DEBUG: Searching for dependency: gcc43
 DEBUG: Found Dependency: receipt exists for gcc43
 DEBUG: Executing org.macports.main (py26-numpy)
 DEBUG: Skipping completed org.macports.fetch (py26-numpy)
 DEBUG: Skipping completed org.macports.checksum (py26-numpy)
 DEBUG: Skipping completed org.macports.extract (py26-numpy)
 DEBUG: Skipping completed org.macports.patch (py26-numpy)
 DEBUG: Skipping completed org.macports.configure (py26-numpy)
 --->  Building py26-numpy
 DEBUG: Executing org.macports.build (py26-numpy)
 DEBUG: Environment: LAPACK='/opt/local/lib'
 MACOSX_DEPLOYMENT_TARGET='10.6' ATLAS='/opt/local/lib'
 BLAS='/opt/local/lib' CC='/opt/local/bin/gcc-mp-4.3'
 CXX='/opt/local/bin/g++-mp-4.3'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0"
 &&
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
 setup.py --no-user-cfg build'
 Running from numpy source directory.
 non-existing path in 'numpy/distutils': 'site.cfg'
 F2PY Version 2
 blas_opt_info:
 blas_mkl_info:
   libraries mkl,vml,guide not found in
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib
   libraries mkl,vml,guide not found in /usr/local/lib
   libraries mkl,vml,guide not found in /usr/lib
   libraries mkl,vml,guide not found in /opt/local/lib
   NOT AVAILABLE

 atlas_blas_threads_info:
 Setting PTATLAS=ATLAS
 Setting PTATLAS=ATLAS
 Setting PTATLAS=ATLAS
   FOUND:
     libraries = ['ptf77blas', 'ptcblas', 'atlas']
     library_dirs = ['/opt/local/lib']
     language = c
     include_dirs = ['/opt/local/include']

 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/config.py:361:
 DeprecationWarning:
 +++++++++++++++++++++++++++++++++++++++++++++++++
 Usage of get_output is deprecated: please do not
 use it anymore, and avoid configuration checks
 involving running executable on the target machine.
 +++++++++++++++++++++++++++++++++++++++++++++++++

   DeprecationWarning)
 customize NAGFCompiler
 Could not locate executable f95
 customize AbsoftFCompiler
 Could not locate executable f90
 Could not locate executable f77
 customize IBMFCompiler
 Could not locate executable xlf90
 Could not locate executable xlf
 customize IntelFCompiler
 Could not locate executable ifort
 Could not locate executable ifc
 customize GnuFCompiler
 Could not locate executable g77
 customize Gnu95FCompiler
 Could not locate executable gfortran
 customize G95FCompiler
 Could not locate executable g95
 don't know how to compile Fortran code on platform 'posix'
 compiling '_configtest.c':

 /* This file is generated from numpy/distutils/system_info.py */
 void ATL_buildinfo(void);
 int main(void) {
   ATL_buildinfo();
   return 0;
 }
 C compiler: /opt/local/bin/gcc-mp-4.3 -arch x86_64 -arch i386 -isysroot /
 -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall
 -Wstrict-prototypes

 compile options: '-c'
 gcc-mp-4.3: _configtest.c
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 failure.
 removing: _configtest.c _configtest.o
 Status: 255
 Output:
   FOUND:
     libraries = ['ptf77blas', 'ptcblas', 'atlas']
     library_dirs = ['/opt/local/lib']
     language = c
     define_macros = [('NO_ATLAS_INFO', 2)]
     include_dirs = ['/opt/local/include']

 lapack_opt_info:
 lapack_mkl_info:
 mkl_info:
   libraries mkl,vml,guide not found in
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib
   libraries mkl,vml,guide not found in /usr/local/lib
   libraries mkl,vml,guide not found in /usr/lib
   libraries mkl,vml,guide not found in /opt/local/lib
   NOT AVAILABLE

   NOT AVAILABLE

 atlas_threads_info:
 Setting PTATLAS=ATLAS
   libraries lapack_atlas not found in /opt/local/lib
 numpy.distutils.system_info.atlas_threads_info
 Setting PTATLAS=ATLAS
 Setting PTATLAS=ATLAS
   FOUND:
     libraries = ['lapack', 'ptf77blas', 'ptcblas', 'atlas']
     library_dirs = ['/opt/local/lib']
     language = f77
     include_dirs = ['/opt/local/include']

 customize NAGFCompiler
 customize AbsoftFCompiler
 customize IBMFCompiler
 customize IntelFCompiler
 customize GnuFCompiler
 customize Gnu95FCompiler
 customize G95FCompiler
 don't know how to compile Fortran code on platform 'posix'
 compiling '_configtest.c':

 /* This file is generated from numpy/distutils/system_info.py */
 void ATL_buildinfo(void);
 int main(void) {
   ATL_buildinfo();
   return 0;
 }
 C compiler: /opt/local/bin/gcc-mp-4.3 -arch x86_64 -arch i386 -isysroot /
 -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall
 -Wstrict-prototypes

 compile options: '-c'
 gcc-mp-4.3: _configtest.c
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 failure.
 removing: _configtest.c _configtest.o
 Status: 255
 Output:
   FOUND:
     libraries = ['lapack', 'ptf77blas', 'ptcblas', 'atlas']
     library_dirs = ['/opt/local/lib']
     language = f77
     define_macros = [('NO_ATLAS_INFO', 2)]
     include_dirs = ['/opt/local/include']

 running build
 running config_cc
 unifing config_cc, config, build_clib, build_ext, build commands
 --compiler options
 running config_fc
 unifing config_fc, config, build_clib, build_ext, build commands
 --fcompiler options
 running build_src
 building py_modules sources
 building library "npymath" sources
 building extension "numpy.core._sort" sources
 Generating
 build/src.macosx-10.6-intel-2.6/numpy/core/include/numpy/config.h
 customize NAGFCompiler
 customize AbsoftFCompiler
 customize IBMFCompiler
 customize IntelFCompiler
 customize GnuFCompiler
 customize Gnu95FCompiler
 customize G95FCompiler
 don't know how to compile Fortran code on platform 'posix'
 customize NAGFCompiler
 customize AbsoftFCompiler
 customize IBMFCompiler
 customize IntelFCompiler
 customize GnuFCompiler
 customize Gnu95FCompiler
 customize G95FCompiler
 don't know how to compile Fortran code on platform 'posix'
 C compiler: /opt/local/bin/gcc-mp-4.3 -arch x86_64 -arch i386 -isysroot /
 -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall
 -Wstrict-prototypes

 compile options: '-Inumpy/core/src -Inumpy/core/include
 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6
 -c'
 gcc-mp-4.3: _configtest.c
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 cc1: error: unrecognized command line option "-arch"
 failure.
 removing: _configtest.c _configtest.o
 Traceback (most recent call last):
   File "setup.py", line 172, in <module>
     setup_package()
   File "setup.py", line 165, in setup_package
     configuration=configuration )
   File
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/core.py",
 line 184, in setup
     return old_setup(**new_attr)
   File
 "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py",
 line 152, in setup
     dist.run_commands()
   File
 "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py",
 line 987, in run_commands
     self.run_command(cmd)
   File
 "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py",
 line 1007, in run_command
     cmd_obj.run()
   File
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build.py",
 line 37, in run
     old_build.run(self)
   File
 "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/command/build.py",
 line 134, in run
     self.run_command(cmd_name)
   File
 "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py",
 line 333, in run_command
     self.distribution.run_command(command)
   File
 "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py",
 line 1007, in run_command
     cmd_obj.run()
   File
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py",
 line 130, in run
     self.build_sources()
   File
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py",
 line 147, in build_sources
     self.build_extension_sources(ext)
   File
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py",
 line 250, in build_extension_sources
     sources = self.generate_sources(sources, ext)
   File
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py",
 line 307, in generate_sources
     source = func(extension, build_dir)
   File "numpy/core/setup.py", line 286, in generate_config_h
     moredefs, ignored = cocache.check_types(config_cmd, ext, build_dir)
   File "numpy/core/setup.py", line 30, in check_types
     out = check_types(*a, **kw)
   File "numpy/core/setup.py", line 186, in check_types
     "Cannot compiler 'Python.h'. Perhaps you need to "\
 SystemError: Cannot compiler 'Python.h'. Perhaps you need to install
 python-dev|python-devel.
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0"
 &&
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
 setup.py --no-user-cfg build " returned error 1
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0"
 &&
 /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6
 setup.py --no-user-cfg build " returned error 1
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for py26-numpy):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/22731#comment:21>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list