[MacPorts] #25148: py-ctypes: error: 'MAP_ANONYMOUS' undeclared
MacPorts
noreply at macports.org
Tue Jun 8 11:37:51 PDT 2010
#25148: py-ctypes: error: 'MAP_ANONYMOUS' undeclared
-------------------------------------+--------------------------------------
Reporter: IgnitusBoyone@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port: py-ctypes
-------------------------------------+--------------------------------------
Comment(by IgnitusBoyone@…):
I was wondering about that. I included the full debug output below. This
could be my ignorance, but I could not figure out how to tell py-opengl to
use Python 2.6 or preferably, but possibly not an option 3.1. I had
assumed that python_select python26 would do the trick and I would just
need to clean py-opengl and try again, but When it didn't work I looked in
to the documentation and from what I could find the port decides which
version of python it uses. If I am wrong about this I am more then
willing to try anything. For now I have manually installed py-opengl, but
would prefer to figure out the cause of this problem.
{{{
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-opengl
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-opengl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python24-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py-opengl.
DEBUG: Requested variant i386 is not provided by port py-opengl.
DEBUG: Requested variant macosx is not provided by port py-opengl.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python24 2.4.6_4 exists in the ports tree
DEBUG: python24 2.4.6_4 +darwin+darwin_10+macosx is the latest installed
DEBUG: python24 2.4.6_4 +darwin+darwin_10+macosx is active
DEBUG: Merging existing variants darwin darwin_10 macosx into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port python24.
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18_0 exists in the ports tree
DEBUG: gettext 0.18_0 is the latest installed
DEBUG: gettext 0.18_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.18_0 >= gettext 0.18_0
DEBUG: No need to upgrade! python24 2.4.6_4 >= python24 2.4.6_4
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-numpy
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py-numpy 1.4.1_0 exists in the ports tree
DEBUG: py-numpy 1.4.1_0 is the latest installed
DEBUG: py-numpy 1.4.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-numpy
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python24-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py-numpy.
DEBUG: Requested variant i386 is not provided by port py-numpy.
DEBUG: Requested variant macosx is not provided by port py-numpy.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fftw-3 3.2.2_0 exists in the ports tree
DEBUG: fftw-3 3.2.2_0 +i386 is the latest installed
DEBUG: fftw-3 3.2.2_0 +i386 is active
DEBUG: Merging existing variants i386 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port fftw-3.
DEBUG: Requested variant macosx is not provided by port fftw-3.
DEBUG: Executing variant i386 provides i386
DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-nose
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py-nose 0.10.4_0 exists in the ports tree
DEBUG: py-nose 0.10.4_0 is the latest installed
DEBUG: py-nose 0.10.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-nose
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python24-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py-nose.
DEBUG: Requested variant i386 is not provided by port py-nose.
DEBUG: Requested variant macosx is not provided by port py-nose.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-setuptools
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py-setuptools 0.6c11_0 exists in the ports tree
DEBUG: py-setuptools 0.6c11_0 is the latest installed
DEBUG: py-setuptools 0.6c11_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-setuptools
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python24-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py-setuptools.
DEBUG: Requested variant i386 is not provided by port py-setuptools.
DEBUG: Requested variant macosx is not provided by port py-setuptools.
DEBUG: No need to upgrade! py-setuptools 0.6c11_0 >= py-setuptools
0.6c11_0
DEBUG: No need to upgrade! py-nose 0.10.4_0 >= py-nose 0.10.4_0
DEBUG: No need to upgrade! py-numpy 1.4.1_0 >= py-numpy 1.4.1_0
---> Computing dependencies for py-opengl
DEBUG: Searching for dependency: python24
DEBUG: Found Dependency: receipt exists for python24
DEBUG: Searching for dependency: py-ctypes
DEBUG: Didn't find receipt, going to depspec regex for: py-ctypes
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-ctypes
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/python
/py-ctypes
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python24-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py-ctypes.
DEBUG: Requested variant i386 is not provided by port py-ctypes.
DEBUG: Requested variant macosx is not provided by port py-ctypes.
DEBUG: Searching for dependency: py-numpy
DEBUG: Found Dependency: receipt exists for py-numpy
DEBUG: Searching for dependency: py-setuptools
DEBUG: Found Dependency: receipt exists for py-setuptools
DEBUG: Searching for dependency: python24
DEBUG: Found Dependency: receipt exists for python24
DEBUG: Searching for dependency: libffi
DEBUG: Found Dependency: receipt exists for libffi
DEBUG: Executing org.macports.main (py-ctypes)
DEBUG: Skipping completed org.macports.fetch (py-ctypes)
DEBUG: Skipping completed org.macports.checksum (py-ctypes)
DEBUG: Skipping completed org.macports.extract (py-ctypes)
DEBUG: Skipping completed org.macports.patch (py-ctypes)
DEBUG: Skipping completed org.macports.configure (py-ctypes)
---> Building py-ctypes
DEBUG: Executing org.macports.build (py-ctypes)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' CC='/usr/bin/gcc-4.2'
CPP='/usr/bin/cpp-4.2'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_python_py-ctypes/work/ctypes-1.0.1" &&
/opt/local/bin/python2.4 setup.py build'
running build
running build_py
running build_ext
building '_ctypes' extension
/usr/bin/gcc-4.2 -fno-strict-aliasing -fno-common -fno-common -dynamic
-DNDEBUG -g -O3 -Wall -Wstrict-prototypes -Isource/darwin
-Ibuild/temp.macosx-10.6-i386-2.4/libffi/include
-Ibuild/temp.macosx-10.6-i386-2.4/libffi
-I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_python_py-ctypes/work/ctypes-1.0.1/source/libffi/src
-I/opt/local/Library/Frameworks/Python.framework/Versions/2.4/include/python2.4
-c source/malloc_closure.c -o
build/temp.macosx-10.6-i386-2.4/source/malloc_closure.o
source/malloc_closure.c: In function 'more_core':
source/malloc_closure.c:51: warning: implicit declaration of function
'getpagesize'
source/malloc_closure.c:70: error: 'MAP_ANONYMOUS' undeclared (first use
in this function)
source/malloc_closure.c:70: error: (Each undeclared identifier is reported
only once
source/malloc_closure.c:70: error: for each function it appears in.)
error: command '/usr/bin/gcc-4.2' failed with exit status 1
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_python_py-ctypes/work/ctypes-1.0.1" &&
/opt/local/bin/python2.4 setup.py build " returned error 1
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_python_py-ctypes/work/ctypes-1.0.1" &&
/opt/local/bin/python2.4 setup.py build " returned error 1
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for py-ctypes):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: The following dependencies failed to build: py-ctypes
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Ticket URL: <http://trac.macports.org/ticket/25148#comment:3>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list