[MacPorts] #32684: Tripwire failed to install - Error: Status 1 encountered during processing - Lion 10.7.2
MacPorts
noreply at macports.org
Tue Dec 27 16:32:22 PST 2011
#32684: Tripwire failed to install - Error: Status 1 encountered during processing
- Lion 10.7.2
---------------------------------+------------------------------------------
Reporter: eriknorthrop@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version:
Keywords: | Port:
---------------------------------+------------------------------------------
Version 2.4.1.2
Log File....
version:1
:debug:main epoch: in tree: 1 installed: 1
:debug:main autoconf 2.68_2 exists in the ports tree
:debug:main autoconf 2.68_2 is the latest installed
:debug:main autoconf 2.68_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_3 exists in the ports tree
:debug:main perl5.12 5.12.3_3 is the latest installed
:debug:main perl5.12 5.12.3_3 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.10_1 exists in the ports tree
:debug:main gdbm 1.10_1 is the latest installed
:debug:main gdbm 1.10_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 is the latest installed
:debug:main gettext 0.18.1.1_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 is the latest installed
:debug:main libiconv 1.14_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 is the latest installed
:debug:main ncurses 5.9_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 is the latest installed
:debug:main expat 2.0.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main m4 1.4.16_0 exists in the ports tree
:debug:main m4 1.4.16_0 is the latest installed
:debug:main m4 1.4.16_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main help2man 1.40.4_1 exists in the ports tree
:debug:main help2man 1.40.4_1 is the latest installed
:debug:main help2man 1.40.4_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
:debug:main p5.12-locale-gettext 1.50.0_6 is the latest installed
:debug:main p5.12-locale-gettext 1.50.0_6 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-locale-gettext
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12
-locale-gettext 1.50.0_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main automake 1.11.1_0 exists in the ports tree
:debug:main automake 1.11.1_0 is the latest installed
:debug:main automake 1.11.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libtool 2.4.2_0 exists in the ports tree
:debug:main libtool 2.4.2_0 is the latest installed
:debug:main libtool 2.4.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0e_1 exists in the ports tree
:debug:main openssl 1.0.0e_1 is the latest installed
:debug:main openssl 1.0.0e_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 is the latest installed
:debug:main zlib 1.2.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:msg:main ---> Computing dependencies for tripwire:info:main .:debug:main
Searching for dependency: autoconf
:debug:main Found Dependency: receipt exists for autoconf
:debug:main Searching for dependency: automake
:debug:main Found Dependency: receipt exists for automake
:debug:main Searching for dependency: libtool
:debug:main Found Dependency: receipt exists for libtool
:debug:main Searching for dependency: openssl
:debug:main Found Dependency: receipt exists for openssl
:msg:main
:debug:main Executing org.macports.main (tripwire)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 503
:debug:main Skipping completed org.macports.archivefetch (tripwire)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (tripwire)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (tripwire)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (tripwire)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (tripwire)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.configure (tripwire)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Tue Dec 27 19:05:21 EST 2011
:notice:build ---> Building tripwire
:debug:build Executing org.macports.build (tripwire)
:debug:build Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:build Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
&& /usr/bin/make -j8 -w all'
:debug:build Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
&& /usr/bin/make -j8 -w all
:info:build make: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
:info:build /usr/bin/make all-recursive
:info:build make[1]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
:info:build Making all in man
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
:info:build Making all in man4
:info:build make[3]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4'
:info:build make[3]: Nothing to be done for `all'.
:info:build make[3]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4'
:info:build Making all in man5
:info:build make[3]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5'
:info:build make[3]: Nothing to be done for `all'.
:info:build make[3]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5'
:info:build Making all in man8
:info:build make[3]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8'
:info:build make[3]: Nothing to be done for `all'.
:info:build make[3]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8'
:info:build make[3]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
:info:build make[3]: Nothing to be done for `all-am'.
:info:build make[3]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
:info:build Making all in src
:info:build make[2]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src'
:info:build Making all in cryptlib
:info:build make[3]: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib'
:info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I..
-I../.. -I/opt/local/include -I/opt/local/include -pipe -O2 -arch x86_64
-c -o integer.o integer.cpp
:info:build In file included from integer.cpp:5:
:info:build In file included from ./modarith.h:9:
:info:build ./algebra.h:276:10: error: use of undeclared identifier
'Equal'
:info:build while (!Equal(g[i1], this->Zero()))
:info:build ^
:info:build this->
:info:build integer.cpp:2082:38: note: in instantiation of member function
'AbstractEuclideanDomain<Integer>::Gcd' requested here
:info:build return EuclideanDomainOf<Integer>().Gcd(a, b);
:info:build ^
:info:build ./algebra.h:13:15: note: must qualify identifier to find this
declaration in dependent base class
:info:build virtual bool Equal(const Element &a, const Element &b)
const =0;
:info:build ^
:info:build 1 error generated.
:info:build make[3]: *** [integer.o] Error 1
:info:build make[3]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib'
:info:build make[2]: *** [all-recursive] Error 1
:info:build make[2]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
:info:build shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
&& /usr/bin/make -j8 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see
log for details)
:debug:build Backtrace: shell command failed (see log for details)
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for tripwire):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
:notice:build Log for tripwire is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/main.log
--
Ticket URL: <https://trac.macports.org/ticket/32684>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list