[MacPorts] #32684: tripwire: error: use of undeclared identifier 'Equal' (was: Tripwire failed to install - Error: Status 1 encountered during processing - Lion 10.7.2)
MacPorts
noreply at macports.org
Tue Dec 27 20:51:01 PST 2011
#32684: tripwire: error: use of undeclared identifier 'Equal'
---------------------------------+------------------------------------------
Reporter: eriknorthrop@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version:
Keywords: clang | Port: tripwire
---------------------------------+------------------------------------------
Changes (by ryandesign@…):
* keywords: => clang
* port: => tripwire
Old description:
> Version 2.4.1.2
>
> Log File....
>
> version:1
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main autoconf 2.68_2 exists in the ports tree
> :debug:main autoconf 2.68_2 is the latest installed
> :debug:main autoconf 2.68_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.3_1 exists in the ports tree
> :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
> :debug:main perl5 5.12.3_1 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: perl5_12 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.3_3 exists in the ports tree
> :debug:main perl5.12 5.12.3_3 is the latest installed
> :debug:main perl5.12 5.12.3_3 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.10_1 exists in the ports tree
> :debug:main gdbm 1.10_1 is the latest installed
> :debug:main gdbm 1.10_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2 is the latest installed
> :debug:main gettext 0.18.1.1_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0 is the latest installed
> :debug:main libiconv 1.14_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1 is the latest installed
> :debug:main ncurses 5.9_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_1 exists in the ports tree
> :debug:main expat 2.0.1_1 is the latest installed
> :debug:main expat 2.0.1_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main m4 1.4.16_0 exists in the ports tree
> :debug:main m4 1.4.16_0 is the latest installed
> :debug:main m4 1.4.16_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main help2man 1.40.4_1 exists in the ports tree
> :debug:main help2man 1.40.4_1 is the latest installed
> :debug:main help2man 1.40.4_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
> :debug:main p5.12-locale-gettext 1.50.0_6 is the latest installed
> :debug:main p5.12-locale-gettext 1.50.0_6 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -locale-gettext
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12
> -locale-gettext 1.50.0_6
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main automake 1.11.1_0 exists in the ports tree
> :debug:main automake 1.11.1_0 is the latest installed
> :debug:main automake 1.11.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libtool 2.4.2_0 exists in the ports tree
> :debug:main libtool 2.4.2_0 is the latest installed
> :debug:main libtool 2.4.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.0e_1 exists in the ports tree
> :debug:main openssl 1.0.0e_1 is the latest installed
> :debug:main openssl 1.0.0e_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.5_0 exists in the ports tree
> :debug:main zlib 1.2.5_0 is the latest installed
> :debug:main zlib 1.2.5_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> :msg:main ---> Computing dependencies for tripwire:info:main
> .:debug:main Searching for dependency: autoconf
> :debug:main Found Dependency: receipt exists for autoconf
> :debug:main Searching for dependency: automake
> :debug:main Found Dependency: receipt exists for automake
> :debug:main Searching for dependency: libtool
> :debug:main Found Dependency: receipt exists for libtool
> :debug:main Searching for dependency: openssl
> :debug:main Found Dependency: receipt exists for openssl
> :msg:main
> :debug:main Executing org.macports.main (tripwire)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 501
> :debug:main euid changed to: 503
> :debug:main Skipping completed org.macports.archivefetch (tripwire)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (tripwire)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (tripwire)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (tripwire)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (tripwire)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.configure (tripwire)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:build build phase started at Tue Dec 27 19:05:21 EST 2011
> :notice:build ---> Building tripwire
> :debug:build Executing org.macports.build (tripwire)
> :debug:build Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.7'
> :debug:build Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
> && /usr/bin/make -j8 -w all'
> :debug:build Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
> && /usr/bin/make -j8 -w all
> :info:build make: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
> :info:build /usr/bin/make all-recursive
> :info:build make[1]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
> :info:build Making all in man
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
> :info:build Making all in man4
> :info:build make[3]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4'
> :info:build make[3]: Nothing to be done for `all'.
> :info:build make[3]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4'
> :info:build Making all in man5
> :info:build make[3]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5'
> :info:build make[3]: Nothing to be done for `all'.
> :info:build make[3]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5'
> :info:build Making all in man8
> :info:build make[3]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8'
> :info:build make[3]: Nothing to be done for `all'.
> :info:build make[3]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8'
> :info:build make[3]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
> :info:build make[3]: Nothing to be done for `all-am'.
> :info:build make[3]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
> :info:build Making all in src
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src'
> :info:build Making all in cryptlib
> :info:build make[3]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib'
> :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I..
> -I../.. -I/opt/local/include -I/opt/local/include -pipe -O2 -arch
> x86_64 -c -o integer.o integer.cpp
> :info:build In file included from integer.cpp:5:
> :info:build In file included from ./modarith.h:9:
> :info:build ./algebra.h:276:10: error: use of undeclared identifier
> 'Equal'
> :info:build while (!Equal(g[i1], this->Zero()))
> :info:build ^
> :info:build this->
> :info:build integer.cpp:2082:38: note: in instantiation of member
> function 'AbstractEuclideanDomain<Integer>::Gcd' requested here
> :info:build return EuclideanDomainOf<Integer>().Gcd(a, b);
> :info:build ^
> :info:build ./algebra.h:13:15: note: must qualify identifier to find this
> declaration in dependent base class
> :info:build virtual bool Equal(const Element &a, const Element
> &b) const =0;
> :info:build ^
> :info:build 1 error generated.
> :info:build make[3]: *** [integer.o] Error 1
> :info:build make[3]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib'
> :info:build make[2]: *** [all-recursive] Error 1
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src'
> :info:build make[1]: *** [all-recursive] Error 1
> :info:build make[1]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
> :info:build make: *** [all] Error 2
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
> :info:build shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
> && /usr/bin/make -j8 -w all " returned error 2
> :error:build Target org.macports.build returned: shell command failed
> (see log for details)
> :debug:build Backtrace: shell command failed (see log for details)
> while executing
> "command_exec build"
> (procedure "portbuild::build_main" line 8)
> invoked from within
> "$procedure $targetname"
> :info:build Warning: the following items did not execute (for tripwire):
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> :notice:build Log for tripwire is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/main.log
New description:
Version 2.4.1.2
Log File....
--
Comment:
I see you're using clang. Can you try if [wiki:ProblemHotlist#compiler
using a different compiler] helps?
There's also several newer versions available; perhaps updating the port
would help.
--
Ticket URL: <https://trac.macports.org/ticket/32684#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list