[MacPorts] #36606: Transcode build fails

MacPorts noreply at macports.org
Mon Oct 15 03:17:10 PDT 2012 

#36606: Transcode build fails
--------------------------------+-------------------------
  Reporter:  neukomp@…          |      Owner:  lionteeth@…
      Type:  defect             |     Status:  new
  Priority:  Normal             |  Milestone:
 Component:  ports              |    Version:  2.1.2
Resolution:                     |   Keywords:
      Port:  transcode, ffmpeg  |
--------------------------------+-------------------------
Changes (by ryandesign@…):

 * cc: devans@… (added)
 * owner:  macports-tickets@… => lionteeth@…


Old description:

> Ran following install command for transcode on a clean install on ML
> 10.8.2 & Xcode 4.5.1
>
> {{{
> sudo port install transcode +a52dec +faac +freetype +full +imagemagick
> +libdv +libogg +libpostproc +libquicktime +libsdl +libtheora +libvorbis
> +libxml2 +lzo +mjpegtools +x264 +xvid
> }}}
>
> It looks like its a problem with ffmpeg missing a file.
>
> I have installed ffmpeg-devel prior to attempting to install transcode.
> Perhaps transcode doesn't like ffmpeg-devel??
>
> Here is the log:
>
> {{{
> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main pkgconfig 0.27.1_1 exists in the ports tree
> :debug:main pkgconfig 0.27.1_1  is the latest installed
> :debug:main pkgconfig 0.27.1_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0  is the latest installed
> :debug:main libiconv 1.14_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXv 1.0.7_0 exists in the ports tree
> :debug:main xorg-libXv 1.0.7_0  is the latest installed
> :debug:main xorg-libXv 1.0.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXv
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXv 1.0.7_0 >= xorg-libXv 1.0.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXext 1.3.1_0 exists in the ports tree
> :debug:main xorg-libXext 1.3.1_0  is the latest installed
> :debug:main xorg-libXext 1.3.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXext
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext
> 1.3.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libX11 1.5.0_0 exists in the ports tree
> :debug:main xorg-libX11 1.5.0_0  is the latest installed
> :debug:main xorg-libX11 1.5.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libX11
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11
> 1.5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
> :debug:main xorg-libXdmcp 1.1.1_0  is the latest installed
> :debug:main xorg-libXdmcp 1.1.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXdmcp
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp
> 1.1.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXau 1.0.7_0 exists in the ports tree
> :debug:main xorg-libXau 1.0.7_0  is the latest installed
> :debug:main xorg-libXau 1.0.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXau
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau
> 1.0.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xproto 7.0.23_0 exists in the ports tree
> :debug:main xorg-xproto 7.0.23_0  is the latest installed
> :debug:main xorg-xproto 7.0.23_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto
> 7.0.23_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
> :debug:main xorg-libxcb 1.8.1_2 +python27 is the latest installed
> :debug:main xorg-libxcb 1.8.1_2 +python27 is active
> :debug:main Merging existing variants '+python27' into variants
> :debug:main new fully merged portvariants: python27 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libxcb
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant python27 provides python27
> :debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb
> 1.8.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
> :debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
> :debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
> :debug:main Merging existing variants '+python27' into variants
> :debug:main new fully merged portvariants: python27 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xcb-proto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Executing variant python27 provides python27
> :debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto
> 1.7.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxml2 2.8.0_0 exists in the ports tree
> :debug:main libxml2 2.8.0_0  is the latest installed
> :debug:main libxml2 2.8.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.7_0 exists in the ports tree
> :debug:main zlib 1.2.7_0  is the latest installed
> :debug:main zlib 1.2.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xz 5.0.4_0 exists in the ports tree
> :debug:main xz 5.0.4_0  is the latest installed
> :debug:main xz 5.0.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2  is the latest installed
> :debug:main gettext 0.18.1.1_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1  is the latest installed
> :debug:main ncurses 5.9_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.1.0_0 exists in the ports tree
> :debug:main expat 2.1.0_0  is the latest installed
> :debug:main expat 2.1.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main python27 2.7.3_0 exists in the ports tree
> :debug:main python27 2.7.3_0  is the latest installed
> :debug:main python27 2.7.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.1c_0 exists in the ports tree
> :debug:main openssl 1.0.1c_0  is the latest installed
> :debug:main openssl 1.0.1c_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main sqlite3 3.7.14.1_0 exists in the ports tree
> :debug:main sqlite3 3.7.14.1_0  is the latest installed
> :debug:main sqlite3 3.7.14.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! sqlite3 3.7.14.1_0 >= sqlite3 3.7.14.1_0
> :debug:main epoch: in tree: 20090923 installed: 20090923
> :debug:main libedit 20120601-3.0_0 exists in the ports tree
> :debug:main libedit 20120601-3.0_0  is the latest installed
> :debug:main libedit 20120601-3.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit
> 20120601-3.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main db46 4.6.21_7 exists in the ports tree
> :debug:main db46 4.6.21_7  is the latest installed
> :debug:main db46 4.6.21_7  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! db46 4.6.21_7 >= db46 4.6.21_7
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main bzip2 1.0.6_0 exists in the ports tree
> :debug:main bzip2 1.0.6_0  is the latest installed
> :debug:main bzip2 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main python_select 0.3_1 exists in the ports tree
> :debug:main python_select 0.3_1  is the latest installed
> :debug:main python_select 0.3_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! python_select 0.3_1 >= python_select
> 0.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
> :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
> :debug:main xorg-libpthread-stubs 0.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libpthread-stubs
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
> libpthread-stubs 0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
> :debug:main xorg-kbproto 1.0.6_0  is the latest installed
> :debug:main xorg-kbproto 1.0.6_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-kbproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto
> 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
> :debug:main xorg-xextproto 7.2.1_0  is the latest installed
> :debug:main xorg-xextproto 7.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xextproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto
> 7.2.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-videoproto 2.3.1_0 exists in the ports tree
> :debug:main xorg-videoproto 2.3.1_0  is the latest installed
> :debug:main xorg-videoproto 2.3.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-videoproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-videoproto 2.3.1_0 >= xorg-
> videoproto 2.3.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXaw 1.0.11_0 exists in the ports tree
> :debug:main xorg-libXaw 1.0.11_0  is the latest installed
> :debug:main xorg-libXaw 1.0.11_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXaw
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXaw 1.0.11_0 >= xorg-libXaw
> 1.0.11_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libsm 1.2.1_0 exists in the ports tree
> :debug:main xorg-libsm 1.2.1_0  is the latest installed
> :debug:main xorg-libsm 1.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libsm
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libice 1.0.8_0 exists in the ports tree
> :debug:main xorg-libice 1.0.8_0  is the latest installed
> :debug:main xorg-libice 1.0.8_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libice
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice
> 1.0.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXmu 1.1.1_0 exists in the ports tree
> :debug:main xorg-libXmu 1.1.1_0  is the latest installed
> :debug:main xorg-libXmu 1.1.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXmu
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXmu 1.1.1_0 >= xorg-libXmu
> 1.1.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXt 1.1.3_0 exists in the ports tree
> :debug:main xorg-libXt 1.1.3_0  is the latest installed
> :debug:main xorg-libXt 1.1.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXt
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xpm 3.5.10_0 exists in the ports tree
> :debug:main xpm 3.5.10_0  is the latest installed
> :debug:main xpm 3.5.10_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xpm
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xpm 3.5.10_0 >= xpm 3.5.10_0
> :debug:main Found Dependency: path: /opt/local/lib filename:
> libavcodec.dylib regex: ^libavcodec.dylib$
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ffmpeg-devel 20120917_0 exists in the ports tree
> :debug:main ffmpeg-devel 20120917_0 +gpl2+mmx+nonfree is the latest
> installed
> :debug:main ffmpeg-devel 20120917_0 +gpl2+mmx+nonfree is active
> :debug:main Merging existing variants '+gpl2+mmx+nonfree' into variants
> :debug:main new fully merged portvariants: nonfree + gpl2 + mmx +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia
> /ffmpeg-devel
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant mmx provides mmx
> :debug:main Executing variant gpl2 provides gpl2
> :debug:main Executing variant nonfree provides nonfree
> :debug:main No need to upgrade! ffmpeg-devel 20120917_0 >= ffmpeg-devel
> 20120917_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lame 3.99.5_0 exists in the ports tree
> :debug:main lame 3.99.5_0  is the latest installed
> :debug:main lame 3.99.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/lame
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! lame 3.99.5_0 >= lame 3.99.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libvorbis 1.3.3_0 exists in the ports tree
> :debug:main libvorbis 1.3.3_0  is the latest installed
> :debug:main libvorbis 1.3.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libvorbis
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libvorbis 1.3.3_0 >= libvorbis 1.3.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libogg 1.3.0_1 exists in the ports tree
> :debug:main libogg 1.3.0_1  is the latest installed
> :debug:main libogg 1.3.0_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libogg
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libogg 1.3.0_1 >= libogg 1.3.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libopus 1.0.1_0 exists in the ports tree
> :debug:main libopus 1.0.1_0  is the latest installed
> :debug:main libopus 1.0.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libopus
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libopus 1.0.1_0 >= libopus 1.0.1_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main libtheora 1.1.1_1 exists in the ports tree
> :debug:main libtheora 1.1.1_1  is the latest installed
> :debug:main libtheora 1.1.1_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libtheora
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libtheora 1.1.1_1 >= libtheora 1.1.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libmodplug 0.8.8.4_0 exists in the ports tree
> :debug:main libmodplug 0.8.8.4_0  is the latest installed
> :debug:main libmodplug 0.8.8.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libmodplug
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libmodplug 0.8.8.4_0 >= libmodplug
> 0.8.8.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main dirac 1.0.2_1 exists in the ports tree
> :debug:main dirac 1.0.2_1  is the latest installed
> :debug:main dirac 1.0.2_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/dirac
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! dirac 1.0.2_1 >= dirac 1.0.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cppunit 1.12.1_0 exists in the ports tree
> :debug:main cppunit 1.12.1_0  is the latest installed
> :debug:main cppunit 1.12.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cppunit
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main schroedinger 1.0.11_0 exists in the ports tree
> :debug:main schroedinger 1.0.11_0  is the latest installed
> :debug:main schroedinger 1.0.11_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/schroedinger
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! schroedinger 1.0.11_0 >= schroedinger
> 1.0.11_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main orc 0.4.16_0 exists in the ports tree
> :debug:main orc 0.4.16_0  is the latest installed
> :debug:main orc 0.4.16_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orc
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! orc 0.4.16_0 >= orc 0.4.16_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main openjpeg 1.5.0_3 exists in the ports tree
> :debug:main openjpeg 1.5.0_3  is the latest installed
> :debug:main openjpeg 1.5.0_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openjpeg
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! openjpeg 1.5.0_3 >= openjpeg 1.5.0_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpng 1.5.13_0 exists in the ports tree
> :debug:main libpng 1.5.13_0  is the latest installed
> :debug:main libpng 1.5.13_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libpng 1.5.13_0 >= libpng 1.5.13_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main tiff 3.9.5_0 exists in the ports tree
> :debug:main tiff 3.9.5_0  is the latest installed
> :debug:main tiff 3.9.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jpeg 8d_0 exists in the ports tree
> :debug:main jpeg 8d_0  is the latest installed
> :debug:main jpeg 8d_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lcms2 2.4_0 exists in the ports tree
> :debug:main lcms2 2.4_0  is the latest installed
> :debug:main lcms2 2.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! lcms2 2.4_0 >= lcms2 2.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jbigkit 2.0_2 exists in the ports tree
> :debug:main jbigkit 2.0_2  is the latest installed
> :debug:main jbigkit 2.0_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbigkit
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main speex 1.2rc1_0 exists in the ports tree
> :debug:main speex 1.2rc1_0  is the latest installed
> :debug:main speex 1.2rc1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/speex
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! speex 1.2rc1_0 >= speex 1.2rc1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libvpx 1.1.0_0 exists in the ports tree
> :debug:main libvpx 1.1.0_0  is the latest installed
> :debug:main libvpx 1.1.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libvpx
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libvpx 1.1.0_0 >= libvpx 1.1.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libsdl 1.2.15_0 exists in the ports tree
> :debug:main libsdl 1.2.15_0 +x11 is the latest installed
> :debug:main libsdl 1.2.15_0 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libsdl
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! libsdl 1.2.15_0 >= libsdl 1.2.15_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree
> :debug:main xorg-libXrandr 1.3.2_0  is the latest installed
> :debug:main xorg-libXrandr 1.3.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXrandr
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr
> 1.3.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xrender 0.9.7_0 exists in the ports tree
> :debug:main xrender 0.9.7_0  is the latest installed
> :debug:main xrender 0.9.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
> :debug:main xorg-renderproto 0.11.1_0  is the latest installed
> :debug:main xorg-renderproto 0.11.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-renderproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
> renderproto 0.11.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-randrproto 1.4.0_0 exists in the ports tree
> :debug:main xorg-randrproto 1.4.0_0  is the latest installed
> :debug:main xorg-randrproto 1.4.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-randrproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-randrproto 1.4.0_0 >= xorg-
> randrproto 1.4.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main XviD 1.3.2_3 exists in the ports tree
> :debug:main XviD 1.3.2_3  is the latest installed
> :debug:main XviD 1.3.2_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/XviD
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! XviD 1.3.2_3 >= XviD 1.3.2_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main x264 20111210_0 exists in the ports tree
> :debug:main x264 20111210_0  is the latest installed
> :debug:main x264 20111210_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/x264
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! x264 20111210_0 >= x264 20111210_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main faac 1.28_2 exists in the ports tree
> :debug:main faac 1.28_2  is the latest installed
> :debug:main faac 1.28_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/faac
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! faac 1.28_2 >= faac 1.28_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libmpeg2 0.5.1_2 exists in the ports tree
> :debug:main libmpeg2 0.5.1_2  is the latest installed
> :debug:main libmpeg2 0.5.1_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libmpeg2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libmpeg2 0.5.1_2 >= libmpeg2 0.5.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libdvdread 4.2.0_0 exists in the ports tree
> :debug:main libdvdread 4.2.0_0  is the latest installed
> :debug:main libdvdread 4.2.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libdvdread
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libdvdread 4.2.0_0 >= libdvdread 4.2.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libdvdcss 1.2.12_0 exists in the ports tree
> :debug:main libdvdcss 1.2.12_0  is the latest installed
> :debug:main libdvdcss 1.2.12_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libdvdcss
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libdvdcss 1.2.12_0 >= libdvdcss 1.2.12_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main a52dec 0.7.4_0 exists in the ports tree
> :debug:main a52dec 0.7.4_0  is the latest installed
> :debug:main a52dec 0.7.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/a52dec
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! a52dec 0.7.4_0 >= a52dec 0.7.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main freetype 2.4.10_0 exists in the ports tree
> :debug:main freetype 2.4.10_0  is the latest installed
> :debug:main freetype 2.4.10_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ImageMagick 6.8.0-0_0 exists in the ports tree
> :debug:main ImageMagick 6.8.0-0_0 +q16 is the latest installed
> :debug:main ImageMagick 6.8.0-0_0 +q16 is active
> :debug:main Merging existing variants '+q16' into variants
> :debug:main new fully merged portvariants: q16 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/ImageMagick
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Executing variant q16 provides q16
> :debug:main No need to upgrade! ImageMagick 6.8.0-0_0 >= ImageMagick
> 6.8.0-0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main webp 0.2.0_1 exists in the ports tree
> :debug:main webp 0.2.0_1  is the latest installed
> :debug:main webp 0.2.0_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/webp
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! webp 0.2.0_1 >= webp 0.2.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fftw-3 3.3.2_1 exists in the ports tree
> :debug:main fftw-3 3.3.2_1  is the latest installed
> :debug:main fftw-3 3.3.2_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/fftw-3
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! fftw-3 3.3.2_1 >= fftw-3 3.3.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fontconfig 2.9.0_1 exists in the ports tree
> :debug:main fontconfig 2.9.0_1  is the latest installed
> :debug:main fontconfig 2.9.0_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ghostscript 9.06_1 exists in the ports tree
> :debug:main ghostscript 9.06_1  is the latest installed
> :debug:main ghostscript 9.06_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/ghostscript
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! ghostscript 9.06_1 >= ghostscript 9.06_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jbig2dec 0.11_1 exists in the ports tree
> :debug:main jbig2dec 0.11_1  is the latest installed
> :debug:main jbig2dec 0.11_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbig2dec
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! jbig2dec 0.11_1 >= jbig2dec 0.11_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libidn 1.25_0 exists in the ports tree
> :debug:main libidn 1.25_0  is the latest installed
> :debug:main libidn 1.25_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libidn 1.25_0 >= libidn 1.25_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpaper 1.1.24_0 exists in the ports tree
> :debug:main libpaper 1.1.24_0  is the latest installed
> :debug:main libpaper 1.1.24_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/libpaper
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libpaper 1.1.24_0 >= libpaper 1.1.24_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.4_0 exists in the ports tree
> :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
> :debug:main perl5 5.12.4_0 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: perl5_12 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.4_1 exists in the ports tree
> :debug:main perl5.12 5.12.4_1  is the latest installed
> :debug:main perl5.12 5.12.4_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.10_2 exists in the ports tree
> :debug:main gdbm 1.10_2  is the latest installed
> :debug:main gdbm 1.10_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libtool 2.4.2_3 exists in the ports tree
> :debug:main libtool 2.4.2_3  is the latest installed
> :debug:main libtool 2.4.2_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libtool 2.4.2_3 >= libtool 2.4.2_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main urw-fonts 1.0.7pre44_0 exists in the ports tree
> :debug:main urw-fonts 1.0.7pre44_0  is the latest installed
> :debug:main urw-fonts 1.0.7pre44_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /urw-fonts
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts
> 1.0.7pre44_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libdv 1.0.0_0 exists in the ports tree
> :debug:main libdv 1.0.0_0  is the latest installed
> :debug:main libdv 1.0.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libdv
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main No need to upgrade! libdv 1.0.0_0 >= libdv 1.0.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main popt 1.16_0 exists in the ports tree
> :debug:main popt 1.16_0  is the latest installed
> :debug:main popt 1.16_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/popt
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! popt 1.16_0 >= popt 1.16_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libquicktime 1.2.4_2 exists in the ports tree
> :debug:main libquicktime 1.2.4_2  is the latest installed
> :debug:main libquicktime 1.2.4_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libquicktime
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libquicktime 1.2.4_2 >= libquicktime
> 1.2.4_2
> :debug:main Found Dependency: path: /opt/local/lib filename:
> libavcodec.dylib regex: ^libavcodec.dylib$
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main faad2 2.7_0 exists in the ports tree
> :debug:main faad2 2.7_0  is the latest installed
> :debug:main faad2 2.7_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/faad2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! faad2 2.7_0 >= faad2 2.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lzo2 2.05_1 exists in the ports tree
> :debug:main lzo2 2.05_1  is the latest installed
> :debug:main lzo2 2.05_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main mjpegtools 2.0.0_1 exists in the ports tree
> :debug:main mjpegtools 2.0.0_1 +x11 is the latest installed
> :debug:main mjpegtools 2.0.0_1 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/mjpegtools
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! mjpegtools 2.0.0_1 >= mjpegtools 2.0.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gtk2 2.24.13_0 exists in the ports tree
> :debug:main gtk2 2.24.13_0 +x11 is the latest installed
> :debug:main gtk2 2.24.13_0 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! gtk2 2.24.13_0 >= gtk2 2.24.13_0
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main atk 2.2.0_2 exists in the ports tree
> :debug:main atk 2.2.0_2  is the latest installed
> :debug:main atk 2.2.0_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! atk 2.2.0_2 >= atk 2.2.0_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main glib2 2.32.4_0 exists in the ports tree
> :debug:main glib2 2.32.4_0  is the latest installed
> :debug:main glib2 2.32.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! glib2 2.32.4_0 >= glib2 2.32.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libffi 3.0.11_1 exists in the ports tree
> :debug:main libffi 3.0.11_1  is the latest installed
> :debug:main libffi 3.0.11_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libffi 3.0.11_1 >= libffi 3.0.11_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gobject-introspection 1.32.1_3 exists in the ports tree
> :debug:main gobject-introspection 1.32.1_3  is the latest installed
> :debug:main gobject-introspection 1.32.1_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /gobject-introspection
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gobject-introspection 1.32.1_3 >=
> gobject-introspection 1.32.1_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main cairo 1.12.2_1 exists in the ports tree
> :debug:main cairo 1.12.2_1 +x11 is the latest installed
> :debug:main cairo 1.12.2_1 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! cairo 1.12.2_1 >= cairo 1.12.2_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpixman 0.26.2_0 exists in the ports tree
> :debug:main libpixman 0.26.2_0  is the latest installed
> :debug:main libpixman 0.26.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libpixman 0.26.2_0 >= libpixman 0.26.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
> :debug:main xorg-xcb-util 0.3.9_0  is the latest installed
> :debug:main xorg-xcb-util 0.3.9_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xcb-util
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util
> 0.3.9_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main pango 1.30.1_2 exists in the ports tree
> :debug:main pango 1.30.1_2 +x11 is the latest installed
> :debug:main pango 1.30.1_2 +x11 is active
> :debug:main Merging existing variants '+x11' into variants
> :debug:main new fully merged portvariants: x11 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main adding the default universal variant
> :debug:main Executing variant x11 provides x11
> :debug:main No need to upgrade! pango 1.30.1_2 >= pango 1.30.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main Xft2 2.3.1_0 exists in the ports tree
> :debug:main Xft2 2.3.1_0  is the latest installed
> :debug:main Xft2 2.3.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
> :debug:main epoch: in tree: 2 installed: 2
> :debug:main gdk-pixbuf2 2.26.4_0 exists in the ports tree
> :debug:main gdk-pixbuf2 2.26.4_0  is the latest installed
> :debug:main gdk-pixbuf2 2.26.4_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
> /gdk-pixbuf2
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdk-pixbuf2 2.26.4_0 >= gdk-pixbuf2
> 2.26.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jasper 1.900.1_9 exists in the ports tree
> :debug:main jasper 1.900.1_9  is the latest installed
> :debug:main jasper 1.900.1_9  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXi 1.6.1_0 exists in the ports tree
> :debug:main xorg-libXi 1.6.1_0  is the latest installed
> :debug:main xorg-libXi 1.6.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXi
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXi 1.6.1_0 >= xorg-libXi 1.6.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-inputproto 2.2_0 exists in the ports tree
> :debug:main xorg-inputproto 2.2_0  is the latest installed
> :debug:main xorg-inputproto 2.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-inputproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-inputproto 2.2_0 >= xorg-inputproto
> 2.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXcursor 1.1.13_0 exists in the ports tree
> :debug:main xorg-libXcursor 1.1.13_0  is the latest installed
> :debug:main xorg-libXcursor 1.1.13_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXcursor
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXcursor 1.1.13_0 >= xorg-
> libXcursor 1.1.13_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXfixes 5.0_0 exists in the ports tree
> :debug:main xorg-libXfixes 5.0_0  is the latest installed
> :debug:main xorg-libXfixes 5.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXfixes
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes
> 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-fixesproto 5.0_0 exists in the ports tree
> :debug:main xorg-fixesproto 5.0_0  is the latest installed
> :debug:main xorg-fixesproto 5.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-fixesproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto
> 5.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXinerama 1.1.2_0 exists in the ports tree
> :debug:main xorg-libXinerama 1.1.2_0  is the latest installed
> :debug:main xorg-libXinerama 1.1.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXinerama
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXinerama 1.1.2_0 >= xorg-
> libXinerama 1.1.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
> :debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
> :debug:main xorg-xineramaproto 1.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xineramaproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-
> xineramaproto 1.2.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
> :debug:main xorg-libXdamage 1.1.3_0  is the latest installed
> :debug:main xorg-libXdamage 1.1.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXdamage
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-
> libXdamage 1.1.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
> :debug:main xorg-damageproto 1.2.1_0  is the latest installed
> :debug:main xorg-damageproto 1.2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-damageproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
> damageproto 1.2.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
> :debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
> :debug:main xorg-libXcomposite 0.4.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXcomposite
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
> libXcomposite 0.4.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
> :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
> :debug:main xorg-compositeproto 0.4.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-compositeproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
> compositeproto 0.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main shared-mime-info 1.0_0 exists in the ports tree
> :debug:main shared-mime-info 1.0_0  is the latest installed
> :debug:main shared-mime-info 1.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
> /shared-mime-info
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-
> info 1.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
> :debug:main hicolor-icon-theme 0.12_0  is the latest installed
> :debug:main hicolor-icon-theme 0.12_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
> /hicolor-icon-theme
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-
> icon-theme 0.12_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libsdl_gfx 2.0.24_0 exists in the ports tree
> :debug:main libsdl_gfx 2.0.24_0  is the latest installed
> :debug:main libsdl_gfx 2.0.24_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libsdl_gfx
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libsdl_gfx 2.0.24_0 >= libsdl_gfx
> 2.0.24_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXxf86dga 1.1.3_0 exists in the ports tree
> :debug:main xorg-libXxf86dga 1.1.3_0  is the latest installed
> :debug:main xorg-libXxf86dga 1.1.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-libXxf86dga
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xorg-libXxf86dga 1.1.3_0 >= xorg-
> libXxf86dga 1.1.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xf86dgaproto 2.1_0 exists in the ports tree
> :debug:main xorg-xf86dgaproto 2.1_0  is the latest installed
> :debug:main xorg-xf86dgaproto 2.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11
> /xorg-xf86dgaproto
> :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! xorg-xf86dgaproto 2.1_0 >= xorg-
> xf86dgaproto 2.1_0
> :msg:main --->  Computing dependencies for transcode:info:main
> .:debug:main transcode has no conflicts
> :debug:main Searching for dependency: pkgconfig
> :debug:main Found Dependency: receipt exists for pkgconfig
> :debug:main Searching for dependency: xorg-libXv
> :debug:main Found Dependency: receipt exists for xorg-libXv
> :debug:main Searching for dependency: xorg-libXaw
> :debug:main Found Dependency: receipt exists for xorg-libXaw
> :debug:main Searching for dependency: xpm
> :debug:main Found Dependency: receipt exists for xpm
> :debug:main Found Dependency: path: /opt/local/lib filename:
> libavcodec.dylib regex: ^libavcodec.dylib$
> :debug:main Searching for dependency: ffmpeg
> :debug:main Didn't find receipt, going to depspec regex for: ffmpeg
> :debug:main Found Dependency: path: /opt/local/lib filename:
> libavcodec.dylib regex: ^libavcodec.dylib$
> :debug:main Searching for dependency: libmpeg2
> :debug:main Found Dependency: receipt exists for libmpeg2
> :debug:main Searching for dependency: libdvdread
> :debug:main Found Dependency: receipt exists for libdvdread
> :debug:main Searching for dependency: jpeg
> :debug:main Found Dependency: receipt exists for jpeg
> :debug:main Searching for dependency: lame
> :debug:main Found Dependency: receipt exists for lame
> :debug:main Searching for dependency: a52dec
> :debug:main Found Dependency: receipt exists for a52dec
> :debug:main Searching for dependency: faac
> :debug:main Found Dependency: receipt exists for faac
> :debug:main Searching for dependency: freetype
> :debug:main Found Dependency: receipt exists for freetype
> :debug:main Searching for dependency: ImageMagick
> :debug:main Found Dependency: receipt exists for ImageMagick
> :debug:main Searching for dependency: libdv
> :debug:main Found Dependency: receipt exists for libdv
> :debug:main Searching for dependency: libogg
> :debug:main Found Dependency: receipt exists for libogg
> :debug:main Searching for dependency: libquicktime
> :debug:main Found Dependency: receipt exists for libquicktime
> :debug:main Searching for dependency: libsdl
> :debug:main Found Dependency: receipt exists for libsdl
> :debug:main Searching for dependency: libtheora
> :debug:main Found Dependency: receipt exists for libtheora
> :debug:main Searching for dependency: libvorbis
> :debug:main Found Dependency: receipt exists for libvorbis
> :debug:main Searching for dependency: libxml2
> :debug:main Found Dependency: receipt exists for libxml2
> :debug:main Searching for dependency: lzo2
> :debug:main Found Dependency: receipt exists for lzo2
> :debug:main Searching for dependency: mjpegtools
> :debug:main Found Dependency: receipt exists for mjpegtools
> :debug:main Searching for dependency: x264
> :debug:main Found Dependency: receipt exists for x264
> :debug:main Searching for dependency: XviD
> :debug:main Found Dependency: receipt exists for XviD
> :msg:main
> :debug:main Executing org.macports.main (transcode)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 503
> :debug:main euid changed to: 502
> :debug:main Skipping completed org.macports.archivefetch (transcode)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (transcode)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (transcode)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (transcode)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (transcode)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.configure (transcode)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:build build phase started at Sun Oct 14 22:00:39 EDT 2012
> :notice:build --->  Building transcode
> :debug:build Executing org.macports.build (transcode)
> :debug:build Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.8'
> :debug:build Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7"
> && /usr/bin/make -j2 -w all'
> :debug:build Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7"
> && /usr/bin/make -j2 -w all
> :info:build make: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7'
> :info:build /usr/bin/make  all-recursive
> :info:build make[1]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7'
> :info:build Making all in aclib
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/aclib'
> :info:build make[2]: Nothing to be done for `all'.
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/aclib'
> :info:build Making all in avilib
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/avilib'
> :info:build make[2]: Nothing to be done for `all'.
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/avilib'
> :info:build Making all in libtc
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/libtc'
> :info:build make[2]: Nothing to be done for `all'.
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/libtc'
> :info:build Making all in libtcaudio
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/libtcaudio'
> :info:build make[2]: Nothing to be done for `all'.
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/libtcaudio'
> :info:build Making all in libtcvideo
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/libtcvideo'
> :info:build make[2]: Nothing to be done for `all'.
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/libtcvideo'
> :info:build Making all in encode
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/encode'
> :info:build make[2]: Nothing to be done for `all'.
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/encode'
> :info:build Making all in export
> :info:build make[2]: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/export'
> :info:build /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/clang
> -Wall -Wstrict-prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64
> -no-cpp-precomp -D_INTL_REDIRECT_MACROS -module -avoid-version
> -L/opt/local/lib -arch x86_64 -o export_ac3.la -rpath
> /opt/local/lib/transcode export_ac3.lo  -lm -lz -ldl
> :info:build /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/clang
> -Wall -Wstrict-prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64
> -no-cpp-precomp -D_INTL_REDIRECT_MACROS -module -avoid-version
> -L/opt/local/lib -arch x86_64 -o export_divx5.la -rpath
> /opt/local/lib/transcode export_divx5_la-export_divx5.lo export_divx5_la-
> aud_aux.lo export_divx5_la-divx4_vbr.lo -L/opt/local/lib -lavcodec
> -L/usr/lib -lmp3lame  -lm -lz -ldl
> :info:build libtool: link: /usr/bin/clang -Wl,-undefined
> -Wl,dynamic_lookup -o .libs/export_ac3.so -bundle  .libs/export_ac3.o
> -L/opt/local/lib -lm -lz -ldl  -O2 -arch x86_64 -arch x86_64
> :info:build libtool: link: /usr/bin/clang -Wl,-undefined
> -Wl,dynamic_lookup -o .libs/export_divx5.so -bundle  .libs
> /export_divx5_la-export_divx5.o .libs/export_divx5_la-aud_aux.o .libs
> /export_divx5_la-divx4_vbr.o   -L/opt/local/lib -lavcodec -L/usr/lib
> /opt/local/lib/libmp3lame.dylib -lm -lz -ldl  -O2 -arch x86_64 -arch
> x86_64
> :info:build libtool: link: ( cd ".libs" && rm -f "export_ac3.la" && ln -s
> "../export_ac3.la" "export_ac3.la" )
> :info:build /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/clang
> -Wall -Wstrict-prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64
> -no-cpp-precomp -D_INTL_REDIRECT_MACROS -module -avoid-version
> -L/opt/local/lib -arch x86_64 -o export_dv.la -rpath
> /opt/local/lib/transcode export_dv_la-export_dv.lo export_dv_la-
> aud_aux.lo -L/opt/local/lib -ldv -lm   -L/opt/local/lib -lavcodec
> -L/usr/lib -lmp3lame  -lm -lz -ldl
> :info:build libtool: link: ( cd ".libs" && rm -f "export_divx5.la" && ln
> -s "../export_divx5.la" "export_divx5.la" )
> :info:build /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/clang
> -Wall -Wstrict-prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64
> -no-cpp-precomp -D_INTL_REDIRECT_MACROS -module -avoid-version
> -L/opt/local/lib -arch x86_64 -o export_dvraw.la -rpath
> /opt/local/lib/transcode export_dvraw_la-export_dvraw.lo -L/opt/local/lib
> -ldv -lm   -lm -lm -lz -ldl
> :info:build libtool: link: /usr/bin/clang -Wl,-undefined
> -Wl,dynamic_lookup -o .libs/export_dvraw.so -bundle  .libs
> /export_dvraw_la-export_dvraw.o   -L/opt/local/lib
> /opt/local/lib/libdv.dylib -lm -lz -ldl  -O2 -arch x86_64 -arch x86_64
> :info:build libtool: link: /usr/bin/clang -Wl,-undefined
> -Wl,dynamic_lookup -o .libs/export_dv.so -bundle  .libs/export_dv_la-
> export_dv.o .libs/export_dv_la-aud_aux.o   -L/opt/local/lib
> /opt/local/lib/libdv.dylib -lavcodec -L/usr/lib
> /opt/local/lib/libmp3lame.dylib -lm -lz -ldl  -O2 -arch x86_64 -arch
> x86_64
> :info:build libtool: link: ( cd ".libs" && rm -f "export_dvraw.la" && ln
> -s "../export_dvraw.la" "export_dvraw.la" )
> :info:build /bin/sh ../libtool  --tag=CC   --mode=compile /usr/bin/clang
> -DHAVE_CONFIG_H -I. -I..  -D_REENTRANT
> -DMOD_PATH=\"/opt/local/lib/transcode\" -I.. -I../src
> -I/opt/local/include   -I/usr/include -I/opt/local/include  -Wall
> -Wstrict-prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64 -no-cpp-
> precomp -D_INTL_REDIRECT_MACROS -MT export_ffmpeg_la-export_ffmpeg.lo -MD
> -MP -MF .deps/export_ffmpeg_la-export_ffmpeg.Tpo -c -o export_ffmpeg_la-
> export_ffmpeg.lo `test -f 'export_ffmpeg.c' || echo './'`export_ffmpeg.c
> :info:build libtool: link: ( cd ".libs" && rm -f "export_dv.la" && ln -s
> "../export_dv.la" "export_dv.la" )
> :info:build /bin/sh ../libtool  --tag=CC   --mode=compile /usr/bin/clang
> -DHAVE_CONFIG_H -I. -I..  -D_REENTRANT
> -DMOD_PATH=\"/opt/local/lib/transcode\" -I.. -I../src
> -I/opt/local/include   -I/usr/include -I/opt/local/include  -Wall
> -Wstrict-prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64 -no-cpp-
> precomp -D_INTL_REDIRECT_MACROS -MT export_ffmpeg_la-ffmpeg_cfg.lo -MD
> -MP -MF .deps/export_ffmpeg_la-ffmpeg_cfg.Tpo -c -o export_ffmpeg_la-
> ffmpeg_cfg.lo `test -f 'ffmpeg_cfg.c' || echo './'`ffmpeg_cfg.c
> :info:build libtool: compile:  /usr/bin/clang -DHAVE_CONFIG_H -I. -I..
> -D_REENTRANT -DMOD_PATH=\"/opt/local/lib/transcode\" -I.. -I../src
> -I/opt/local/include -I/usr/include -I/opt/local/include -Wall -Wstrict-
> prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64 -no-cpp-precomp
> -D_INTL_REDIRECT_MACROS -MT export_ffmpeg_la-export_ffmpeg.lo -MD -MP -MF
> .deps/export_ffmpeg_la-export_ffmpeg.Tpo -c export_ffmpeg.c  -fno-common
> -DPIC -o .libs/export_ffmpeg_la-export_ffmpeg.o
> :info:build libtool: compile:  /usr/bin/clang -DHAVE_CONFIG_H -I. -I..
> -D_REENTRANT -DMOD_PATH=\"/opt/local/lib/transcode\" -I.. -I../src
> -I/opt/local/include -I/usr/include -I/opt/local/include -Wall -Wstrict-
> prototypes -Wmissing-prototypes -pipe -O2 -arch x86_64 -no-cpp-precomp
> -D_INTL_REDIRECT_MACROS -MT export_ffmpeg_la-ffmpeg_cfg.lo -MD -MP -MF
> .deps/export_ffmpeg_la-ffmpeg_cfg.Tpo -c ffmpeg_cfg.c  -fno-common -DPIC
> -o .libs/export_ffmpeg_la-ffmpeg_cfg.o
> :info:build ffmpeg_cfg.c:163:71: error: use of undeclared identifier
> 'CODEC_FLAG_PART'
> :info:build     {"vdpart", &lavc_param_data_partitioning,
> TCCONF_TYPE_FLAG, 0, 0, CODEC_FLAG_PART},
> :info:build
> ^
> :info:build ffmpeg_cfg.c:165:56: error: use of undeclared identifier
> 'CODEC_FLAG_PART'
> :info:build     {"gray", &lavc_param_gray, TCCONF_TYPE_FLAG, 0, 0,
> CODEC_FLAG_PART},
> :info:build                                                        ^
> :info:build ffmpeg_cfg.c:214:54: error: use of undeclared identifier
> 'CODEC_FLAG_H263P_UMV'
> :info:build     {"umv", &lavc_param_umv, TCCONF_TYPE_FLAG, 0, 0,
> CODEC_FLAG_H263P_UMV},
> :info:build                                                      ^
> :info:build ffmpeg_cfg.c:226:52: error: use of undeclared identifier
> 'CODEC_FLAG_H263P_SLICE_STRUCT'
> :info:build     {"ss", &lavc_param_ss, TCCONF_TYPE_FLAG, 0, 0,
> CODEC_FLAG_H263P_SLICE_STRUCT},
> :info:build                                                    ^
> :info:build ffmpeg_cfg.c:227:67: error: use of undeclared identifier
> 'CODEC_FLAG_SVCD_SCAN_OFFSET'
> :info:build     {"svcd_sof", &lavc_param_scan_offset, TCCONF_TYPE_FLAG,
> 0, 0, CODEC_FLAG_SVCD_SCAN_OFFSET},
> :info:build
> ^
> :info:build ffmpeg_cfg.c:228:54: error: use of undeclared identifier
> 'CODEC_FLAG_ALT_SCAN'
> :info:build     {"alt", &lavc_param_alt, TCCONF_TYPE_FLAG, 0, 0,
> CODEC_FLAG_ALT_SCAN},
> :info:build                                                      ^
> :info:build 6 errors generated.
> :info:build export_ffmpeg.c:176:7: warning: assigning to 'char *' from
> 'const char *' discards qualifiers [-Wincompatible-pointer-types]
> :info:build                 tmp = s + strlen(s);
> :info:build                     ^ ~~~~~~~~~~~~~
> :info:build export_ffmpeg.c:183:10: fatal error: 'libavcodec/opt.h' file
> not found
> :info:build #include <libavcodec/opt.h>
> :info:build          ^
> :info:build make[2]: *** [export_ffmpeg_la-ffmpeg_cfg.lo] Error 1
> :info:build make[2]: *** Waiting for unfinished jobs....
> :info:build 1 warning and 1 error generated.
> :info:build make[2]: *** [export_ffmpeg_la-export_ffmpeg.lo] Error 1
> :info:build make[2]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7/export'
> :info:build make[1]: *** [all-recursive] Error 1
> :info:build make[1]: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7'
> :info:build make: *** [all] Error 2
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7'
> :info:build Command failed:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/work/transcode-1.1.7"
> && /usr/bin/make -j2 -w all
> :info:build Exit code: 2
> :error:build org.macports.build for port transcode returned: command
> execution failed
> :debug:build Error code: CHILDSTATUS 83391 2
> :debug:build Backtrace: command execution failed
>     while executing
> "system -nice 0 $fullcmdstring"
>     ("eval" body line 1)
>     invoked from within
> "eval system $notty $nice \$fullcmdstring"
>     invoked from within
> "command_exec build"
>     (procedure "portbuild::build_main" line 8)
>     invoked from within
> "$procedure $targetname"
> :info:build Warning: targets not executed for transcode:
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> :notice:build Please see the log file for port transcode for details:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_transcode/transcode/main.log
> }}}

New description:

 Ran following install command for transcode on a clean install on ML
 10.8.2 & Xcode 4.5.1

 {{{
 sudo port install transcode +a52dec +faac +freetype +full +imagemagick
 +libdv +libogg +libpostproc +libquicktime +libsdl +libtheora +libvorbis
 +libxml2 +lzo +mjpegtools +x264 +xvid
 }}}

 It looks like its a problem with ffmpeg missing a file.

 I have installed ffmpeg-devel prior to attempting to install transcode.
 Perhaps transcode doesn't like ffmpeg-devel??

--

Comment:

 Please attach lengthy output instead of pasting it. I've removed your log
 from the ticket description and attached it instead.

 The log is not from a clean attempt. Please "sudo port clean transcode",
 then try again, then attach the new main.log if it fails again.

-- 
Ticket URL: <https://trac.macports.org/ticket/36606#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS

More information about the macports-tickets mailing list