[MacPorts] #47354: pstoedit 3.70 does not have most of the available drivers that 3.62 did
MacPorts
noreply at macports.org
Sat Apr 4 20:46:31 PDT 2015
#47354: pstoedit 3.70 does not have most of the available drivers that 3.62 did
----------------------------+--------------------------------
Reporter: darrell.lamm@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.3.3
Keywords: pstoedit | Port: pstoedit
----------------------------+--------------------------------
Previous version of pstoedit (3.62) provided the following formats:
=====================================================
psf: .fps: Flattened PostScript (no curves)
(built-in)
-------------------------------------------
ps: .spsc: Simplified PostScript with curves
(built-in)
-------------------------------------------
debug: .dbg: for test purposes (built-in)
-------------------------------------------
dump: .dbg: for test purposes (same as debug)
(built-in)
-------------------------------------------
gs: .gs: any device that GhostScript
provides - use gs:format, e.g. gs:pdfwrite (built-in)
-------------------------------------------
ps2ai: .ai: Adobe Illustrator via ps2ai.ps of
GhostScript (built-in)
-------------------------------------------
gmfa: .meta: ASCII GNU metafile
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
gmfb: .meta: binary GNU metafile
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot: .plot: GNU libplot output types, e.g.
plot:-plotformat X (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-cgm: .cgm: cgm via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-ai: .ai: ai via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-svg: .svg: svg via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-ps: .ps: ps via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-fig: .fig: fig via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-pcl: .pcl: pcl via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-hpgl: .hpgl: hpgl via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-tek: .tek: tek via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
magick: ....: MAGICK driver
(/opt/local/lib/pstoedit/libp2edrvmagick++.0.so)
-------------------------------------------
gcode: .gcode: emc2 gcode format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
cairo: .c: cairo driver
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -pango : boolean : use pango for font rendering]
[ -funcname : string : sets the base name for the
generated functions and variables. e.g. myfig]
[ -header : string : sets the output file name for
the generated C header file. e.g. myfig.h]
-------------------------------------------
lwo: .lwo: LightWave 3D Object Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
rib: .rib: RenderMan Interface Bytestream
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
rpl: .rpl: Real3D Programming Language Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
dxf: .dxf: CAD exchange format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -polyaslines : boolean : use LINE instead of POLYLINE in
DXF]
[ -mm : boolean : use mm coordinates instead of
points in DXF (mm=pt/72*25.4)]
[ -ctl : boolean : map colors to layers]
[ -splineaspolyline : boolean : approximate splines with
PolyLines (only for -f dxf_s)]
[ -splineasnurb : boolean : experimental (only for -f
dxf_s)]
[ -splineasbspline : boolean : experimental (only for -f
dxf_s)]
[-splineassinglespline : boolean : experimental (only for -f
dxf_s)]
[-splineasmultispline : boolean : experimental (only for -f
dxf_s)]
[ -splineasbezier : boolean : use Bezier splines in DXF
format (only for -f dxf_s)]
[ -splineprecision : integer : number of samples to take from
spline curve when doing approximation with -splineaspolyline or
-splineasmultispline - should be >=2 (default 5)]
[ -dumplayernames : boolean : dump all layer names found to
standard output]
[ -layers : string : layers to be shown (comma
separated list of layer names, no space)]
[ -layerfilter : string : layers to be hidden (comma
separated list of layer names, no space)]
-------------------------------------------
dxf_s: .dxf: CAD exchange format with splines
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -polyaslines : boolean : use LINE instead of POLYLINE in
DXF]
[ -mm : boolean : use mm coordinates instead of
points in DXF (mm=pt/72*25.4)]
[ -ctl : boolean : map colors to layers]
[ -splineaspolyline : boolean : approximate splines with
PolyLines (only for -f dxf_s)]
[ -splineasnurb : boolean : experimental (only for -f
dxf_s)]
[ -splineasbspline : boolean : experimental (only for -f
dxf_s)]
[-splineassinglespline : boolean : experimental (only for -f
dxf_s)]
[-splineasmultispline : boolean : experimental (only for -f
dxf_s)]
[ -splineasbezier : boolean : use Bezier splines in DXF
format (only for -f dxf_s)]
[ -splineprecision : integer : number of samples to take from
spline curve when doing approximation with -splineaspolyline or
-splineasmultispline - should be >=2 (default 5)]
[ -dumplayernames : boolean : dump all layer names found to
standard output]
[ -layers : string : layers to be shown (comma
separated list of layer names, no space)]
[ -layerfilter : string : layers to be hidden (comma
separated list of layer names, no space)]
-------------------------------------------
java1: .java: java 1 applet source code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ java class name : string : name of java class to generate]
-------------------------------------------
java2: .java2: java 2 source code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ java class name : string : name of java class to generate]
-------------------------------------------
pdf: .pdf: Adobe's Portable Document Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
kil: .kil: .kil format for Kontour
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
text: .txt: text in different forms
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -height : integer : page height in terms of
characters]
[ -width : integer : page width in terms of
characters]
[ -dump : boolean : dump text pieces]
-------------------------------------------
sk: .sk: Sketch Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
mpost: .mp: MetaPost Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
asy: .asy: Asymptote Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
mma: .m: Mathematica Graphics
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -eofillfills : boolean : Filling is used for eofill
(default is not to fill)]
-------------------------------------------
latex2e: .tex: LaTeX2e picture format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -integers : boolean : round all coordinates to the
nearest integer]
-------------------------------------------
noixml: .xml: Nemetschek NOI XML format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -r : string : Allplan resource file]
[ -bsl : integer : Bezier Split Level (default 3)]
-------------------------------------------
pic: .pic: PIC format for troff et.al.
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -troff : boolean : troff mode (default is groff)]
[ -landscape : boolean : landscape output]
[ -portrait : boolean : portrait output]
[ -keepfont : boolean : print unrecognized literally]
[ -text : boolean : try not to make pictures from
running text]
[ -debug : boolean : enable debug output]
-------------------------------------------
hpgl: .hpgl: HPGL code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -penplotter : boolean : plotter is pen plotter (i.e. no
support for specific line widths)]
[ -pencolorsfromfile : boolean : read pen colors from file
drvhpgl.pencolors in pstoedit data directory]
[ -pencolors : integer : maximum number of pen colors to
be used by pstoedit (default 0) - ]
[ -filltype : string : select fill type e.g. FT 1]
[ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1]
[ -rot90 : boolean : rotate hpgl by 90 degrees]
[ -rot180 : boolean : rotate hpgl by 180 degrees]
[ -rot270 : boolean : rotate hpgl by 270 degrees]
-------------------------------------------
pcl: .pcl: PCL code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -penplotter : boolean : plotter is pen plotter (i.e. no
support for specific line widths)]
[ -pencolorsfromfile : boolean : read pen colors from file
drvhpgl.pencolors in pstoedit data directory]
[ -pencolors : integer : maximum number of pen colors to
be used by pstoedit (default 0) - ]
[ -filltype : string : select fill type e.g. FT 1]
[ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1]
[ -rot90 : boolean : rotate hpgl by 90 degrees]
[ -rot180 : boolean : rotate hpgl by 180 degrees]
[ -rot270 : boolean : rotate hpgl by 270 degrees]
-------------------------------------------
pcbi: .dat: engrave data - insulate/PCB format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
pcb: .pcb: pcb format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -grid : double : attempt to snap relevant output
to grid (mils) and put failed objects to a different layer]
[ -snapdist : double : grid snap distance ratio (0 <
snapdist <= 0.5, default 0.1)]
[ -tshiftx : double : additional x shift measured in
target units (mils)]
[ -tshifty : double : additional y shift measured in
target units (mils)]
[ -grid : double : attempt to snap relevant output
to grid (mils) and put failed objects to a different layer]
[ -mm : boolean : Switch to metric units (mm)]
[ -stdnames : boolean : use standard layer names
instead of descriptive names]
[ -forcepoly : boolean : force all objects to be
interpreted as polygons]
-------------------------------------------
pcbfill: .pcbfill: pcb format with fills
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
gschem: .gschem: gschem format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
cfdg: .cfdg: Context Free Design Grammar
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
tk: .tk: tk and/or tk applet source code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -R : boolean : swap HW]
[ -I : boolean : no impress]
[ -n : string : tagnames]
-------------------------------------------
vtk: .vtk: VTK driver: if you don't want to
see this, uncomment the corresponding line in makefile and make again
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -VTKeoption : integer : just an example]
-------------------------------------------
svm: .svm: StarView/OpenOffice.org metafile
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -m : boolean : map to Arial]
[ -nf : boolean : emulate narrow fonts]
-------------------------------------------
gnuplot: .gnuplot: gnuplot format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
tgif: .obj: Tgif .obj format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -ta : boolean : text as attribute]
-------------------------------------------
fig: .fig: .fig format for xfig
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -startdepth : integer : Set the initial depth (default
999)]
[ -metric : boolean : Switch to centimeter display
(default inches)]
[ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
this if you also use this option with xfig]
[ -depth : integer : Set the page depth in inches
(default 11)]
-------------------------------------------
xfig: .fig: .fig format for xfig
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -startdepth : integer : Set the initial depth (default
999)]
[ -metric : boolean : Switch to centimeter display
(default inches)]
[ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
this if you also use this option with xfig]
[ -depth : integer : Set the page depth in inches
(default 11)]
-------------------------------------------
tfig: .fig: .fig format for xfig
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -startdepth : integer : Set the initial depth (default
999)]
[ -metric : boolean : Switch to centimeter display
(default inches)]
[ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
this if you also use this option with xfig]
[ -depth : integer : Set the page depth in inches
(default 11)]
-------------------------------------------
idraw: .idraw: Interviews draw format (EPS)
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
sample: .sam: sample driver: if you don't want
to see this, uncomment the corresponding line in makefile and make again
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -sampleoption : integer : just an example]
-------------------------------------------
=======================================
Now, after sudo port update pstoedit for version 3.70
=======================================
Available formats :
psf: .fps: Flattened PostScript (no curves)
(built-in)
-------------------------------------------
ps: .spsc: Simplified PostScript with curves
(built-in)
-------------------------------------------
debug: .dbg: for test purposes (built-in)
-------------------------------------------
dump: .dbg: for test purposes (same as debug)
(built-in)
-------------------------------------------
gs: .gs: any device that Ghostscript
provides - use gs:format, e.g. gs:pdfwrite (built-in)
-------------------------------------------
ps2ai: .ai: Adobe Illustrator via ps2ai.ps of
Ghostscript (built-in)
-------------------------------------------
====================
ls /opt/local/lib/pstoedit:
libp2edrvlplot.0.so libp2edrvmagick++.0.so libp2edrvstd.0.so
libp2edrvlplot.so libp2edrvmagick++.so libp2edrvstd.so
Thanks,
Darrell Lamm
--
Ticket URL: <https://trac.macports.org/ticket/47354>
MacPorts <https://www.macports.org/>
Ports system for OS X
More information about the macports-tickets
mailing list