[MacPorts] #47354: pstoedit 3.70 does not have most of the available drivers that 3.62 did
MacPorts
noreply at macports.org
Sun Apr 5 10:51:01 PDT 2015
#47354: pstoedit 3.70 does not have most of the available drivers that 3.62 did
-----------------------------+--------------------------------
Reporter: darrell.lamm@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.3.3
Resolution: | Keywords:
Port: pstoedit |
-----------------------------+--------------------------------
Changes (by ryandesign@…):
* keywords: pstoedit =>
Old description:
> Previous version of pstoedit (3.62) provided the following formats:
> =====================================================
>
> psf: .fps: Flattened PostScript (no curves)
> (built-in)
> -------------------------------------------
> ps: .spsc: Simplified PostScript with curves
> (built-in)
> -------------------------------------------
> debug: .dbg: for test purposes (built-
> in)
> -------------------------------------------
> dump: .dbg: for test purposes (same as debug)
> (built-in)
> -------------------------------------------
> gs: .gs: any device that GhostScript
> provides - use gs:format, e.g. gs:pdfwrite (built-in)
> -------------------------------------------
> ps2ai: .ai: Adobe Illustrator via ps2ai.ps of
> GhostScript (built-in)
> -------------------------------------------
> gmfa: .meta: ASCII GNU metafile
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> gmfb: .meta: binary GNU metafile
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot: .plot: GNU libplot output types, e.g.
> plot:-plotformat X (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-cgm: .cgm: cgm via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-ai: .ai: ai via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-svg: .svg: svg via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-ps: .ps: ps via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-fig: .fig: fig via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-pcl: .pcl: pcl via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-hpgl: .hpgl: hpgl via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-tek: .tek: tek via GNU libplot
> (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -plotformat : string : plotutil format to generate]
> -------------------------------------------
> magick: ....: MAGICK driver
> (/opt/local/lib/pstoedit/libp2edrvmagick++.0.so)
> -------------------------------------------
> gcode: .gcode: emc2 gcode format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> cairo: .c: cairo driver
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -pango : boolean : use pango for font rendering]
> [ -funcname : string : sets the base name for the
> generated functions and variables. e.g. myfig]
> [ -header : string : sets the output file name for
> the generated C header file. e.g. myfig.h]
> -------------------------------------------
> lwo: .lwo: LightWave 3D Object Format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> rib: .rib: RenderMan Interface Bytestream
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> rpl: .rpl: Real3D Programming Language
> Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> dxf: .dxf: CAD exchange format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -polyaslines : boolean : use LINE instead of POLYLINE
> in DXF]
> [ -mm : boolean : use mm coordinates instead of
> points in DXF (mm=pt/72*25.4)]
> [ -ctl : boolean : map colors to layers]
> [ -splineaspolyline : boolean : approximate splines with
> PolyLines (only for -f dxf_s)]
> [ -splineasnurb : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbspline : boolean : experimental (only for -f
> dxf_s)]
> [-splineassinglespline : boolean : experimental (only for -f
> dxf_s)]
> [-splineasmultispline : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbezier : boolean : use Bezier splines in DXF
> format (only for -f dxf_s)]
> [ -splineprecision : integer : number of samples to take from
> spline curve when doing approximation with -splineaspolyline or
> -splineasmultispline - should be >=2 (default 5)]
> [ -dumplayernames : boolean : dump all layer names found to
> standard output]
> [ -layers : string : layers to be shown (comma
> separated list of layer names, no space)]
> [ -layerfilter : string : layers to be hidden (comma
> separated list of layer names, no space)]
> -------------------------------------------
> dxf_s: .dxf: CAD exchange format with splines
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -polyaslines : boolean : use LINE instead of POLYLINE
> in DXF]
> [ -mm : boolean : use mm coordinates instead of
> points in DXF (mm=pt/72*25.4)]
> [ -ctl : boolean : map colors to layers]
> [ -splineaspolyline : boolean : approximate splines with
> PolyLines (only for -f dxf_s)]
> [ -splineasnurb : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbspline : boolean : experimental (only for -f
> dxf_s)]
> [-splineassinglespline : boolean : experimental (only for -f
> dxf_s)]
> [-splineasmultispline : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbezier : boolean : use Bezier splines in DXF
> format (only for -f dxf_s)]
> [ -splineprecision : integer : number of samples to take from
> spline curve when doing approximation with -splineaspolyline or
> -splineasmultispline - should be >=2 (default 5)]
> [ -dumplayernames : boolean : dump all layer names found to
> standard output]
> [ -layers : string : layers to be shown (comma
> separated list of layer names, no space)]
> [ -layerfilter : string : layers to be hidden (comma
> separated list of layer names, no space)]
> -------------------------------------------
> java1: .java: java 1 applet source code
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ java class name : string : name of java class to
> generate]
> -------------------------------------------
> java2: .java2: java 2 source code
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ java class name : string : name of java class to
> generate]
> -------------------------------------------
> pdf: .pdf: Adobe's Portable Document Format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> kil: .kil: .kil format for Kontour
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> text: .txt: text in different forms
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -height : integer : page height in terms of
> characters]
> [ -width : integer : page width in terms of
> characters]
> [ -dump : boolean : dump text pieces]
> -------------------------------------------
> sk: .sk: Sketch Format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> mpost: .mp: MetaPost Format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> asy: .asy: Asymptote Format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> mma: .m: Mathematica Graphics
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -eofillfills : boolean : Filling is used for eofill
> (default is not to fill)]
> -------------------------------------------
> latex2e: .tex: LaTeX2e picture format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -integers : boolean : round all coordinates to the
> nearest integer]
> -------------------------------------------
> noixml: .xml: Nemetschek NOI XML format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -r : string : Allplan resource file]
> [ -bsl : integer : Bezier Split Level (default
> 3)]
> -------------------------------------------
> pic: .pic: PIC format for troff et.al.
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -troff : boolean : troff mode (default is groff)]
> [ -landscape : boolean : landscape output]
> [ -portrait : boolean : portrait output]
> [ -keepfont : boolean : print unrecognized literally]
> [ -text : boolean : try not to make pictures from
> running text]
> [ -debug : boolean : enable debug output]
> -------------------------------------------
> hpgl: .hpgl: HPGL code
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -penplotter : boolean : plotter is pen plotter (i.e.
> no support for specific line widths)]
> [ -pencolorsfromfile : boolean : read pen colors from file
> drvhpgl.pencolors in pstoedit data directory]
> [ -pencolors : integer : maximum number of pen colors
> to be used by pstoedit (default 0) - ]
> [ -filltype : string : select fill type e.g. FT 1]
> [ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1]
> [ -rot90 : boolean : rotate hpgl by 90 degrees]
> [ -rot180 : boolean : rotate hpgl by 180 degrees]
> [ -rot270 : boolean : rotate hpgl by 270 degrees]
> -------------------------------------------
> pcl: .pcl: PCL code
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -penplotter : boolean : plotter is pen plotter (i.e.
> no support for specific line widths)]
> [ -pencolorsfromfile : boolean : read pen colors from file
> drvhpgl.pencolors in pstoedit data directory]
> [ -pencolors : integer : maximum number of pen colors
> to be used by pstoedit (default 0) - ]
> [ -filltype : string : select fill type e.g. FT 1]
> [ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1]
> [ -rot90 : boolean : rotate hpgl by 90 degrees]
> [ -rot180 : boolean : rotate hpgl by 180 degrees]
> [ -rot270 : boolean : rotate hpgl by 270 degrees]
> -------------------------------------------
> pcbi: .dat: engrave data - insulate/PCB
> format (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> pcb: .pcb: pcb format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -grid : double : attempt to snap relevant
> output to grid (mils) and put failed objects to a different layer]
> [ -snapdist : double : grid snap distance ratio (0 <
> snapdist <= 0.5, default 0.1)]
> [ -tshiftx : double : additional x shift measured in
> target units (mils)]
> [ -tshifty : double : additional y shift measured in
> target units (mils)]
> [ -grid : double : attempt to snap relevant
> output to grid (mils) and put failed objects to a different layer]
> [ -mm : boolean : Switch to metric units (mm)]
> [ -stdnames : boolean : use standard layer names
> instead of descriptive names]
> [ -forcepoly : boolean : force all objects to be
> interpreted as polygons]
> -------------------------------------------
> pcbfill: .pcbfill: pcb format with fills
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> gschem: .gschem: gschem format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> cfdg: .cfdg: Context Free Design Grammar
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> tk: .tk: tk and/or tk applet source code
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -R : boolean : swap HW]
> [ -I : boolean : no impress]
> [ -n : string : tagnames]
> -------------------------------------------
> vtk: .vtk: VTK driver: if you don't want to
> see this, uncomment the corresponding line in makefile and make again
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -VTKeoption : integer : just an example]
> -------------------------------------------
> svm: .svm: StarView/OpenOffice.org metafile
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -m : boolean : map to Arial]
> [ -nf : boolean : emulate narrow fonts]
> -------------------------------------------
> gnuplot: .gnuplot: gnuplot format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> tgif: .obj: Tgif .obj format
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -ta : boolean : text as attribute]
> -------------------------------------------
> fig: .fig: .fig format for xfig
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -startdepth : integer : Set the initial depth (default
> 999)]
> [ -metric : boolean : Switch to centimeter display
> (default inches)]
> [ -usecorrectfontsize : boolean : don't scale fonts for xfig.
> Use this if you also use this option with xfig]
> [ -depth : integer : Set the page depth in inches
> (default 11)]
> -------------------------------------------
> xfig: .fig: .fig format for xfig
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -startdepth : integer : Set the initial depth (default
> 999)]
> [ -metric : boolean : Switch to centimeter display
> (default inches)]
> [ -usecorrectfontsize : boolean : don't scale fonts for xfig.
> Use this if you also use this option with xfig]
> [ -depth : integer : Set the page depth in inches
> (default 11)]
> -------------------------------------------
> tfig: .fig: .fig format for xfig
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -startdepth : integer : Set the initial depth (default
> 999)]
> [ -metric : boolean : Switch to centimeter display
> (default inches)]
> [ -usecorrectfontsize : boolean : don't scale fonts for xfig.
> Use this if you also use this option with xfig]
> [ -depth : integer : Set the page depth in inches
> (default 11)]
> -------------------------------------------
> idraw: .idraw: Interviews draw format (EPS)
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> -------------------------------------------
> sample: .sam: sample driver: if you don't want
> to see this, uncomment the corresponding line in makefile and make again
> (/opt/local/lib/pstoedit/libp2edrvstd.0.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -sampleoption : integer : just an example]
> -------------------------------------------
> =======================================
>
> Now, after sudo port update pstoedit for version 3.70
> =======================================
> Available formats :
> psf: .fps: Flattened PostScript (no curves)
> (built-in)
> -------------------------------------------
> ps: .spsc: Simplified PostScript with curves
> (built-in)
> -------------------------------------------
> debug: .dbg: for test purposes (built-
> in)
> -------------------------------------------
> dump: .dbg: for test purposes (same as debug)
> (built-in)
> -------------------------------------------
> gs: .gs: any device that Ghostscript
> provides - use gs:format, e.g. gs:pdfwrite (built-in)
> -------------------------------------------
> ps2ai: .ai: Adobe Illustrator via ps2ai.ps of
> Ghostscript (built-in)
> -------------------------------------------
> ====================
>
> ls /opt/local/lib/pstoedit:
> libp2edrvlplot.0.so libp2edrvmagick++.0.so libp2edrvstd.0.so
> libp2edrvlplot.so libp2edrvmagick++.so libp2edrvstd.so
>
> Thanks,
> Darrell Lamm
New description:
Previous version of pstoedit (3.62) provided the following formats:
{{{
psf: .fps: Flattened PostScript (no curves)
(built-in)
-------------------------------------------
ps: .spsc: Simplified PostScript with curves
(built-in)
-------------------------------------------
debug: .dbg: for test purposes (built-in)
-------------------------------------------
dump: .dbg: for test purposes (same as debug)
(built-in)
-------------------------------------------
gs: .gs: any device that GhostScript
provides - use gs:format, e.g. gs:pdfwrite (built-in)
-------------------------------------------
ps2ai: .ai: Adobe Illustrator via ps2ai.ps of
GhostScript (built-in)
-------------------------------------------
gmfa: .meta: ASCII GNU metafile
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
gmfb: .meta: binary GNU metafile
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot: .plot: GNU libplot output types, e.g.
plot:-plotformat X (/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-cgm: .cgm: cgm via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-ai: .ai: ai via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-svg: .svg: svg via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-ps: .ps: ps via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-fig: .fig: fig via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-pcl: .pcl: pcl via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-hpgl: .hpgl: hpgl via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
plot-tek: .tek: tek via GNU libplot
(/opt/local/lib/pstoedit/libp2edrvlplot.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -plotformat : string : plotutil format to generate]
-------------------------------------------
magick: ....: MAGICK driver
(/opt/local/lib/pstoedit/libp2edrvmagick++.0.so)
-------------------------------------------
gcode: .gcode: emc2 gcode format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
cairo: .c: cairo driver
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -pango : boolean : use pango for font rendering]
[ -funcname : string : sets the base name for the
generated functions and variables. e.g. myfig]
[ -header : string : sets the output file name for
the generated C header file. e.g. myfig.h]
-------------------------------------------
lwo: .lwo: LightWave 3D Object Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
rib: .rib: RenderMan Interface Bytestream
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
rpl: .rpl: Real3D Programming Language Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
dxf: .dxf: CAD exchange format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -polyaslines : boolean : use LINE instead of POLYLINE in
DXF]
[ -mm : boolean : use mm coordinates instead of
points in DXF (mm=pt/72*25.4)]
[ -ctl : boolean : map colors to layers]
[ -splineaspolyline : boolean : approximate splines with
PolyLines (only for -f dxf_s)]
[ -splineasnurb : boolean : experimental (only for -f
dxf_s)]
[ -splineasbspline : boolean : experimental (only for -f
dxf_s)]
[-splineassinglespline : boolean : experimental (only for -f
dxf_s)]
[-splineasmultispline : boolean : experimental (only for -f
dxf_s)]
[ -splineasbezier : boolean : use Bezier splines in DXF
format (only for -f dxf_s)]
[ -splineprecision : integer : number of samples to take from
spline curve when doing approximation with -splineaspolyline or
-splineasmultispline - should be >=2 (default 5)]
[ -dumplayernames : boolean : dump all layer names found to
standard output]
[ -layers : string : layers to be shown (comma
separated list of layer names, no space)]
[ -layerfilter : string : layers to be hidden (comma
separated list of layer names, no space)]
-------------------------------------------
dxf_s: .dxf: CAD exchange format with splines
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -polyaslines : boolean : use LINE instead of POLYLINE in
DXF]
[ -mm : boolean : use mm coordinates instead of
points in DXF (mm=pt/72*25.4)]
[ -ctl : boolean : map colors to layers]
[ -splineaspolyline : boolean : approximate splines with
PolyLines (only for -f dxf_s)]
[ -splineasnurb : boolean : experimental (only for -f
dxf_s)]
[ -splineasbspline : boolean : experimental (only for -f
dxf_s)]
[-splineassinglespline : boolean : experimental (only for -f
dxf_s)]
[-splineasmultispline : boolean : experimental (only for -f
dxf_s)]
[ -splineasbezier : boolean : use Bezier splines in DXF
format (only for -f dxf_s)]
[ -splineprecision : integer : number of samples to take from
spline curve when doing approximation with -splineaspolyline or
-splineasmultispline - should be >=2 (default 5)]
[ -dumplayernames : boolean : dump all layer names found to
standard output]
[ -layers : string : layers to be shown (comma
separated list of layer names, no space)]
[ -layerfilter : string : layers to be hidden (comma
separated list of layer names, no space)]
-------------------------------------------
java1: .java: java 1 applet source code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ java class name : string : name of java class to generate]
-------------------------------------------
java2: .java2: java 2 source code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ java class name : string : name of java class to generate]
-------------------------------------------
pdf: .pdf: Adobe's Portable Document Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
kil: .kil: .kil format for Kontour
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
text: .txt: text in different forms
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -height : integer : page height in terms of
characters]
[ -width : integer : page width in terms of
characters]
[ -dump : boolean : dump text pieces]
-------------------------------------------
sk: .sk: Sketch Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
mpost: .mp: MetaPost Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
asy: .asy: Asymptote Format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
mma: .m: Mathematica Graphics
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -eofillfills : boolean : Filling is used for eofill
(default is not to fill)]
-------------------------------------------
latex2e: .tex: LaTeX2e picture format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -integers : boolean : round all coordinates to the
nearest integer]
-------------------------------------------
noixml: .xml: Nemetschek NOI XML format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -r : string : Allplan resource file]
[ -bsl : integer : Bezier Split Level (default 3)]
-------------------------------------------
pic: .pic: PIC format for troff et.al.
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -troff : boolean : troff mode (default is groff)]
[ -landscape : boolean : landscape output]
[ -portrait : boolean : portrait output]
[ -keepfont : boolean : print unrecognized literally]
[ -text : boolean : try not to make pictures from
running text]
[ -debug : boolean : enable debug output]
-------------------------------------------
hpgl: .hpgl: HPGL code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -penplotter : boolean : plotter is pen plotter (i.e. no
support for specific line widths)]
[ -pencolorsfromfile : boolean : read pen colors from file
drvhpgl.pencolors in pstoedit data directory]
[ -pencolors : integer : maximum number of pen colors to
be used by pstoedit (default 0) - ]
[ -filltype : string : select fill type e.g. FT 1]
[ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1]
[ -rot90 : boolean : rotate hpgl by 90 degrees]
[ -rot180 : boolean : rotate hpgl by 180 degrees]
[ -rot270 : boolean : rotate hpgl by 270 degrees]
-------------------------------------------
pcl: .pcl: PCL code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -penplotter : boolean : plotter is pen plotter (i.e. no
support for specific line widths)]
[ -pencolorsfromfile : boolean : read pen colors from file
drvhpgl.pencolors in pstoedit data directory]
[ -pencolors : integer : maximum number of pen colors to
be used by pstoedit (default 0) - ]
[ -filltype : string : select fill type e.g. FT 1]
[ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1]
[ -rot90 : boolean : rotate hpgl by 90 degrees]
[ -rot180 : boolean : rotate hpgl by 180 degrees]
[ -rot270 : boolean : rotate hpgl by 270 degrees]
-------------------------------------------
pcbi: .dat: engrave data - insulate/PCB format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
pcb: .pcb: pcb format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -grid : double : attempt to snap relevant output
to grid (mils) and put failed objects to a different layer]
[ -snapdist : double : grid snap distance ratio (0 <
snapdist <= 0.5, default 0.1)]
[ -tshiftx : double : additional x shift measured in
target units (mils)]
[ -tshifty : double : additional y shift measured in
target units (mils)]
[ -grid : double : attempt to snap relevant output
to grid (mils) and put failed objects to a different layer]
[ -mm : boolean : Switch to metric units (mm)]
[ -stdnames : boolean : use standard layer names
instead of descriptive names]
[ -forcepoly : boolean : force all objects to be
interpreted as polygons]
-------------------------------------------
pcbfill: .pcbfill: pcb format with fills
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
gschem: .gschem: gschem format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
cfdg: .cfdg: Context Free Design Grammar
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
tk: .tk: tk and/or tk applet source code
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -R : boolean : swap HW]
[ -I : boolean : no impress]
[ -n : string : tagnames]
-------------------------------------------
vtk: .vtk: VTK driver: if you don't want to
see this, uncomment the corresponding line in makefile and make again
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -VTKeoption : integer : just an example]
-------------------------------------------
svm: .svm: StarView/OpenOffice.org metafile
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -m : boolean : map to Arial]
[ -nf : boolean : emulate narrow fonts]
-------------------------------------------
gnuplot: .gnuplot: gnuplot format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
tgif: .obj: Tgif .obj format
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -ta : boolean : text as attribute]
-------------------------------------------
fig: .fig: .fig format for xfig
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -startdepth : integer : Set the initial depth (default
999)]
[ -metric : boolean : Switch to centimeter display
(default inches)]
[ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
this if you also use this option with xfig]
[ -depth : integer : Set the page depth in inches
(default 11)]
-------------------------------------------
xfig: .fig: .fig format for xfig
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -startdepth : integer : Set the initial depth (default
999)]
[ -metric : boolean : Switch to centimeter display
(default inches)]
[ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
this if you also use this option with xfig]
[ -depth : integer : Set the page depth in inches
(default 11)]
-------------------------------------------
tfig: .fig: .fig format for xfig
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -startdepth : integer : Set the initial depth (default
999)]
[ -metric : boolean : Switch to centimeter display
(default inches)]
[ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
this if you also use this option with xfig]
[ -depth : integer : Set the page depth in inches
(default 11)]
-------------------------------------------
idraw: .idraw: Interviews draw format (EPS)
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
-------------------------------------------
sample: .sam: sample driver: if you don't want
to see this, uncomment the corresponding line in makefile and make again
(/opt/local/lib/pstoedit/libp2edrvstd.0.so)
This driver supports the following additional options: (specify using -f
"format:-option1 -option2")
[ -sampleoption : integer : just an example]
-------------------------------------------
}}}
Now, after sudo port update pstoedit for version 3.70
{{{
Available formats :
psf: .fps: Flattened PostScript (no curves)
(built-in)
-------------------------------------------
ps: .spsc: Simplified PostScript with curves
(built-in)
-------------------------------------------
debug: .dbg: for test purposes (built-in)
-------------------------------------------
dump: .dbg: for test purposes (same as debug)
(built-in)
-------------------------------------------
gs: .gs: any device that Ghostscript
provides - use gs:format, e.g. gs:pdfwrite (built-in)
-------------------------------------------
ps2ai: .ai: Adobe Illustrator via ps2ai.ps of
Ghostscript (built-in)
-------------------------------------------
}}}
{{{ls /opt/local/lib/pstoedit}}}:
{{{
libp2edrvlplot.0.so libp2edrvmagick++.0.so libp2edrvstd.0.so
libp2edrvlplot.so libp2edrvmagick++.so libp2edrvstd.so
}}}
Thanks,\\
Darrell Lamm
--
--
Ticket URL: <https://trac.macports.org/ticket/47354#comment:1>
MacPorts <https://www.macports.org/>
Ports system for OS X
More information about the macports-tickets
mailing list