sudo port install apache2

Ryan Schmidt ryandesign at macports.org
Fri Dec 14 18:12:07 PST 2007


Well, you should probably just move /usr/local aside first. Other  
software (including MacPorts ports) may be inadvertently linked with  
the libraries in /usr/local/lib. As you discover these, rebuild those  
ports to link them properly with the MacPorts-provided libraries.  
Once you're no longer using any software in /usr/local, then you can  
get rid of it (making sure that you have no actual important data in  
there first).


On Dec 14, 2007, at 20:01, Charlse Darwin wrote:

> Should I run?
> sudo rm -rf /usr/local/lib
>
>
> On Dec 14, 2007, at 8:58 PM, Ryan Schmidt wrote:
>
>> Good, so something in /usr/local was conflicting.
>>
>> I see now all the other libs that you do have in /usr/local/lib.  
>> Those will probably also conflict with MacPorts-installed  
>> programs. This is why we recommend not having anything in /usr/ 
>> local/lib. Instead, install all software you need using MacPorts.
>>
>> On Dec 14, 2007, at 19:53, Charlse Darwin wrote:
>>
>>> $ mv mv /usr/local mv /usr/local-off
>>> Password:
>>> $ sudo port install apache2
>>> --->  Building db44 with target all
>>> --->  Staging db44 into destroot
>>> --->  Installing db44 4.4.20_1+darwin_8
>>> --->  Activating db44 4.4.20_1+darwin_8
>>> --->  Cleaning db44
>>> --->  Fetching gawk
>>> --->  Attempting to fetch gawk-3.1.5.tar.bz2 from http:// 
>>> ftp.gnu.org/gnu/gawk
>>> --->  Verifying checksum(s) for gawk
>>> --->  Extracting gawk
>>> --->  Applying patches to gawk
>>> --->  Configuring gawk
>>>>>>
>>> On Dec 14, 2007, at 8:43 PM, Ryan Schmidt wrote:
>>>
>>>> Um.... it was anticipated to have been in /usr/local/lib but I  
>>>> don't see it there either.
>>>>
>>>> Try moving the entire /usr/local aside (e.g. rename it "/usr/ 
>>>> local-off") and see if that helps.
>>>>
>>>>
>>>> On Dec 14, 2007, at 19:14, Charlse Darwin wrote:
>>>>
>>>>> Where is readline?
>>>>>
>>>>> $ ls /usr/local/*
>>>>> /usr/local/BerkeleyDB.4.2:
>>>>> bin     docs    include lib
>>>>>
>>>>> /usr/local/OpenSourceLicenses:
>>>>> MySQL.txt               RemoteDesktop.txt
>>>>>
>>>>> /usr/local/OpenSourceVersions:
>>>>> MySQL.plist             RemoteDesktop.plist
>>>>>
>>>>> /usr/local/apache:
>>>>> bin     include libexec sbin    share
>>>>>
>>>>> /usr/local/apr:
>>>>> bin     build-1 include lib
>>>>>
>>>>> /usr/local/bin:
>>>>> bash                    darwinxref               
>>>>> make                    python2.5-config         
>>>>> smtpd.py                svndumpfilter
>>>>> bashbug                 decomment                
>>>>> nano                    pythonw                  
>>>>> smtpd2.5.py             svnlook
>>>>> check_dylib             idle                     
>>>>> pydoc                   pythonw2.5               
>>>>> srm                     svnserve
>>>>> checksyms               idle2.5                  
>>>>> pydoc2.5                relpath                  
>>>>> sudo                    svnsync
>>>>> ctfconvert.c            indr                     
>>>>> python                  rnano                    
>>>>> sudoedit                svnversion
>>>>> darwinbuild             kern_tool               python- 
>>>>> config           seg_addr_table           
>>>>> svn                     wget
>>>>> darwinmaster            kextsymboltool           
>>>>> python2.5               seg_hack                 
>>>>> svnadmin                whois
>>>>>
>>>>> /usr/local/etc:
>>>>> wgetrc
>>>>>
>>>>> /usr/local/include:
>>>>> DarwinBuild     apr-1           db.h            dyld             
>>>>> fuse.h          neon            pcap-namedb.h   streams          
>>>>> ulockmgr.h
>>>>> IOKit           cbt             db_cxx.h        fuse             
>>>>> mach-o          pcap-bpf.h      pcap.h          subversion-1
>>>>>
>>>>> /usr/local/info:
>>>>> bash.info       make.info       make.info-1     make.info-2
>>>>>
>>>>> /usr/local/lib:
>>>>> charset.alias                   libkld.a                         
>>>>> libsvn_fs-1.0.dylib             libsvn_ra_svn-1.0.dylib          
>>>>> libsvn_wc-1.0.dylib
>>>>> libapr-1.0.2.8.dylib            libneon.25.0.5.dylib             
>>>>> libsvn_fs-1.dylib               libsvn_ra_svn-1.dylib            
>>>>> libsvn_wc-1.dylib
>>>>> libapr-1.0.dylib                libneon.25.dylib                 
>>>>> libsvn_fs_base-1.0.0.0.dylib    libsvn_repos-1.0.0.0.dylib       
>>>>> libsvnjavahl-1.0.0.0.dylib
>>>>> libapr-1.dylib                  libneon.dylib                    
>>>>> libsvn_fs_base-1.0.dylib        libsvn_repos-1.0.dylib           
>>>>> libsvnjavahl-1.0.dylib
>>>>> libaprutil-1.0.2.8.dylib        libpcap.a                        
>>>>> libsvn_fs_base-1.dylib          libsvn_repos-1.dylib             
>>>>> libsvnjavahl-1.dylib
>>>>> libaprutil-1.0.dylib            libstreams.a                     
>>>>> libsvn_fs_fs-1.0.0.0.dylib      libsvn_subr-1.0.0.0.dylib        
>>>>> libulockmgr.0.0.0.dylib
>>>>> libaprutil-1.dylib              libstreams_debug.a               
>>>>> libsvn_fs_fs-1.0.dylib          libsvn_subr-1.0.dylib            
>>>>> libulockmgr.0.dylib
>>>>> libdb-4.5.dylib                 libstreams_profile.a             
>>>>> libsvn_fs_fs-1.dylib            libsvn_subr-1.dylib              
>>>>> libulockmgr.a
>>>>> libdb-4.dylib                   libsvn_client-1.0.0.0.dylib      
>>>>> libsvn_ra-1.0.0.0.dylib         libsvn_swig_perl-1.0.0.0.dylib   
>>>>> libulockmgr.dylib
>>>>> libdb.dylib                     libsvn_client-1.0.dylib          
>>>>> libsvn_ra-1.0.dylib             libsvn_swig_perl-1.0.dylib       
>>>>> libulockmgr.la
>>>>> libexpat.0.1.0.dylib            libsvn_client-1.dylib            
>>>>> libsvn_ra-1.dylib               libsvn_swig_perl-1.dylib         
>>>>> pkgconfig
>>>>> libexpat.0.dylib                libsvn_delta-1.0.0.0.dylib       
>>>>> libsvn_ra_dav-1.0.0.0.dylib     libsvn_swig_py-1.0.0.0.dylib     
>>>>> svn-apache
>>>>> libexpat.dylib                  libsvn_delta-1.0.dylib           
>>>>> libsvn_ra_dav-1.0.dylib         libsvn_swig_py-1.0.dylib         
>>>>> svn-javahl
>>>>> libfuse.0.0.0.dylib             libsvn_delta-1.dylib             
>>>>> libsvn_ra_dav-1.dylib           libsvn_swig_py-1.dylib           
>>>>> svn-perl
>>>>> libfuse.0.dylib                 libsvn_diff-1.0.0.0.dylib        
>>>>> libsvn_ra_local-1.0.0.0.dylib   libsvn_swig_ruby-1.0.0.0.dylib   
>>>>> svn-python
>>>>> libfuse.a                       libsvn_diff-1.0.dylib            
>>>>> libsvn_ra_local-1.0.dylib       libsvn_swig_ruby-1.0.dylib       
>>>>> svn-ruby
>>>>> libfuse.dylib                   libsvn_diff-1.dylib              
>>>>> libsvn_ra_local-1.dylib         libsvn_swig_ruby-1.dylib
>>>>> libfuse.la                      libsvn_fs-1.0.0.0.dylib          
>>>>> libsvn_ra_svn-1.0.0.0.dylib     libsvn_wc-1.0.0.0.dylib
>>>>>
>>>>> /usr/local/libexec:
>>>>> gcc                     sudo_noexec.dylib       sudo_noexec.la
>>>>>
>>>>> /usr/local/man:
>>>>> man1    man3    whatis
>>>>>
>>>>> /usr/local/sbin:
>>>>> visudo
>>>>>
>>>>> /usr/local/share:
>>>>> darwinbuild     darwinxref      doc             html             
>>>>> info            locale          man
>>>>> $
>>>>>
>>>>>
>>>>> On Dec 14, 2007, at 8:04 PM, Ryan Schmidt wrote:
>>>>>
>>>>>> No no -- you need to remove (or temporarily move aside) the  
>>>>>> readline libraries in /usr/local, *not* the readline installed  
>>>>>> by MacPorts into /opt/local, which is perfectly fine to have.
>>>>>>
>>>>>> On Dec 14, 2007, at 16:54, Charles Darwin wrote:
>>>>>>
>>>>>>> $ sudo port uninstall readline
>>>>>>> --->  Unable to uninstall readline 5.2.007_0, the following  
>>>>>>> ports depend on it:
>>>>>>> --->    bash
>>>>>>> --->    gnupg
>>>>>>> Error: port uninstall failed: Please uninstall the ports that  
>>>>>>> depend on readline first.
>>>>>>> $ sudo port -f uninstall readline
>>>>>>> --->  Unable to uninstall readline 5.2.007_0, the following  
>>>>>>> ports depend on it:
>>>>>>> --->    bash
>>>>>>> --->    gnupg
>>>>>>> Warning: Uninstall forced.  Proceeding despite dependencies.
>>>>>>> --->  Deactivating readline 5.2.007_0
>>>>>>> --->  Uninstalling readline 5.2.007_0
>>>>>>> $ sudo port install apache2
>>>>>>> --->  Building db44 with target all
>>>>>>> Error: Target org.macports.build returned: shell command " cd  
>>>>>>> "/opt/local/var/macports/build/ 
>>>>>>> _opt_local_var_macports_sources_rsync.macports.org_release_ports 
>>>>>>> _databases_db44/work/db-4.4.20/build_unix" && make all "  
>>>>>>> returned error 2
>>>>>>> Command output: /bin/sh ./libtool --mode=compile /usr/bin/ 
>>>>>>> gcc-4.0 -c -O2  -I../dist/.. -I/opt/local/include ../dist/../ 
>>>>>>> db_dump185/db_dump185.c
>>>>>>>  /usr/bin/gcc-4.0 -c -O2 -I../dist/.. -I/opt/local/include ../ 
>>>>>>> dist/../db_dump185/db_dump185.c  -fno-common -DPIC -o .libs/ 
>>>>>>> db_dump185.o
>>>>>>> ../dist/../db_dump185/db_dump185.c: In function 'main':
>>>>>>> ../dist/../db_dump185/db_dump185.c:212: warning: assignment  
>>>>>>> makes pointer from integer without a cast
>>>>>>> ../dist/../db_dump185/db_dump185.c:214: warning: assignment  
>>>>>>> makes pointer from integer without a cast
>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: 'struct __db'  
>>>>>>> has no member named 'seq'
>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: 'R_NEXT'  
>>>>>>> undeclared (first use in this function)
>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: (Each  
>>>>>>> undeclared identifier is reported only once
>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: for each  
>>>>>>> function it appears in.)
>>>>>>> ../dist/../db_dump185/db_dump185.c:234: error: 'struct __db'  
>>>>>>> has no member named 'seq'
>>>>>>> ../dist/../db_dump185/db_dump185.c: In function 'db_hash':
>>>>>>> ../dist/../db_dump185/db_dump185.c:262: error: 'struct __db'  
>>>>>>> has no member named 'internal'
>>>>>>> ../dist/../db_dump185/db_dump185.c:264: error: 'struct __db'  
>>>>>>> has no member named 'internal'
>>>>>>> ../dist/../db_dump185/db_dump185.c: In function 'db_btree':
>>>>>>> ../dist/../db_dump185/db_dump185.c:289: error: 'struct __db'  
>>>>>>> has no member named 'internal'
>>>>>>> make: *** [db_dump185.lo] Error 1
>>>>>>>
>>>>>>> Error: The following dependencies failed to build: apr-util  
>>>>>>> db44 sqlite3 gawk readline
>>>>>>> Error: Status 1 encountered during processing.
>>>>>>> $
>>>>>>>
>>>>>>> On Dec 14, 2007, at 2:16 PM, Daniel J. Luke wrote:
>>>>>>>
>>>>>>>> On Dec 14, 2007, at 12:40 PM, Chris Janton wrote:
>>>>>>>>> On 2007-12-13 , at 21:08 , Daniel J. Luke wrote:
>>>>>>>>>>> Error: The following dependencies failed to build: apr- 
>>>>>>>>>>> util db44 sqlite3 gawk openssl
>>>>>>>>>>> Error: Status 1 encountered during processing.
>>>>>>>>>>
>>>>>>>>>> This is probably related to:
>>>>>>>>>>
>>>>>>>>>> http://trac.macports.org/projects/macports/ticket/12040
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I have the dreaded "readline in /usr/local" problem.
>>>>>>>>> The resolution to the problem says re-install MacPorts from  
>>>>>>>>> the disk image and selfupdate to the latest version.
>>>>>>>>
>>>>>>>> That's the resolution if you are having problems building  
>>>>>>>> MacPorts, not if db44 is having problems.
>>>>>>>>
>>>>>>>> I would recommend removing your readline from /usr/local  
>>>>>>>> (perhaps just temporarily) so that db44 can be installed.
>>>>>>>>
>>>>>>>>> What happens to the long list of ports that I have active  
>>>>>>>>> when I re-install from the disk image?
>>>>>>>>>
>>>>>>>>> mac:/opt system$ sudo du -d 1 -h .
>>>>>>>>> 689M    ./local
>>>>>>>>> 689M    .
>>>>>>>>
>>>>>>>> Nothing should happen to them if you were to reinstall  
>>>>>>>> MacPorts (unless you remove /opt/local or files from within / 
>>>>>>>> opt/local), but it doesn't look like you need to reinstall  
>>>>>>>> MacPorts.
>>>
>>
>



More information about the macports-users mailing list