sudo port install apache2
Charlse Darwin
macports.users at gmail.com
Fri Dec 14 19:05:53 PST 2007
$ sudo apachectl start
dyld: Library not loaded: /usr/local/lib/libexpat.0.1.0.dylib
Referenced from: /usr/sbin/httpd
Reason: image not found
/usr/sbin/apachectl: line 187: 16752 Trace/BPT trap $HTTPD
/usr/sbin/apachectl start: httpd could not be started
$
On Dec 14, 2007, at 9:12 PM, Ryan Schmidt wrote:
> Well, you should probably just move /usr/local aside first. Other
> software (including MacPorts ports) may be inadvertently linked
> with the libraries in /usr/local/lib. As you discover these,
> rebuild those ports to link them properly with the MacPorts-
> provided libraries. Once you're no longer using any software in /
> usr/local, then you can get rid of it (making sure that you have no
> actual important data in there first).
>
>
> On Dec 14, 2007, at 20:01, Charlse Darwin wrote:
>
>> Should I run?
>> sudo rm -rf /usr/local/lib
>>
>>
>> On Dec 14, 2007, at 8:58 PM, Ryan Schmidt wrote:
>>
>>> Good, so something in /usr/local was conflicting.
>>>
>>> I see now all the other libs that you do have in /usr/local/lib.
>>> Those will probably also conflict with MacPorts-installed
>>> programs. This is why we recommend not having anything in /usr/
>>> local/lib. Instead, install all software you need using MacPorts.
>>>
>>> On Dec 14, 2007, at 19:53, Charlse Darwin wrote:
>>>
>>>> $ mv mv /usr/local mv /usr/local-off
>>>> Password:
>>>> $ sudo port install apache2
>>>> ---> Building db44 with target all
>>>> ---> Staging db44 into destroot
>>>> ---> Installing db44 4.4.20_1+darwin_8
>>>> ---> Activating db44 4.4.20_1+darwin_8
>>>> ---> Cleaning db44
>>>> ---> Fetching gawk
>>>> ---> Attempting to fetch gawk-3.1.5.tar.bz2 from http://
>>>> ftp.gnu.org/gnu/gawk
>>>> ---> Verifying checksum(s) for gawk
>>>> ---> Extracting gawk
>>>> ---> Applying patches to gawk
>>>> ---> Configuring gawk
>>>> …
>>>>
>>>> On Dec 14, 2007, at 8:43 PM, Ryan Schmidt wrote:
>>>>
>>>>> Um.... it was anticipated to have been in /usr/local/lib but I
>>>>> don't see it there either.
>>>>>
>>>>> Try moving the entire /usr/local aside (e.g. rename it "/usr/
>>>>> local-off") and see if that helps.
>>>>>
>>>>>
>>>>> On Dec 14, 2007, at 19:14, Charlse Darwin wrote:
>>>>>
>>>>>> Where is readline?
>>>>>>
>>>>>> $ ls /usr/local/*
>>>>>> /usr/local/BerkeleyDB.4.2:
>>>>>> bin docs include lib
>>>>>>
>>>>>> /usr/local/OpenSourceLicenses:
>>>>>> MySQL.txt RemoteDesktop.txt
>>>>>>
>>>>>> /usr/local/OpenSourceVersions:
>>>>>> MySQL.plist RemoteDesktop.plist
>>>>>>
>>>>>> /usr/local/apache:
>>>>>> bin include libexec sbin share
>>>>>>
>>>>>> /usr/local/apr:
>>>>>> bin build-1 include lib
>>>>>>
>>>>>> /usr/local/bin:
>>>>>> bash darwinxref
>>>>>> make python2.5-config
>>>>>> smtpd.py svndumpfilter
>>>>>> bashbug decomment
>>>>>> nano pythonw
>>>>>> smtpd2.5.py svnlook
>>>>>> check_dylib idle
>>>>>> pydoc pythonw2.5
>>>>>> srm svnserve
>>>>>> checksyms idle2.5
>>>>>> pydoc2.5 relpath
>>>>>> sudo svnsync
>>>>>> ctfconvert.c indr
>>>>>> python rnano
>>>>>> sudoedit svnversion
>>>>>> darwinbuild kern_tool python-
>>>>>> config seg_addr_table
>>>>>> svn wget
>>>>>> darwinmaster kextsymboltool
>>>>>> python2.5 seg_hack
>>>>>> svnadmin whois
>>>>>>
>>>>>> /usr/local/etc:
>>>>>> wgetrc
>>>>>>
>>>>>> /usr/local/include:
>>>>>> DarwinBuild apr-1 db.h
>>>>>> dyld fuse.h neon pcap-
>>>>>> namedb.h streams ulockmgr.h
>>>>>> IOKit cbt db_cxx.h
>>>>>> fuse mach-o pcap-bpf.h
>>>>>> pcap.h subversion-1
>>>>>>
>>>>>> /usr/local/info:
>>>>>> bash.info make.info make.info-1 make.info-2
>>>>>>
>>>>>> /usr/local/lib:
>>>>>> charset.alias
>>>>>> libkld.a
>>>>>> libsvn_fs-1.0.dylib
>>>>>> libsvn_ra_svn-1.0.dylib libsvn_wc-1.0.dylib
>>>>>> libapr-1.0.2.8.dylib libneon.
>>>>>> 25.0.5.dylib libsvn_fs-1.dylib
>>>>>> libsvn_ra_svn-1.dylib libsvn_wc-1.dylib
>>>>>> libapr-1.0.dylib libneon.
>>>>>> 25.dylib libsvn_fs_base-1.0.0.0.dylib
>>>>>> libsvn_repos-1.0.0.0.dylib libsvnjavahl-1.0.0.0.dylib
>>>>>> libapr-1.dylib
>>>>>> libneon.dylib
>>>>>> libsvn_fs_base-1.0.dylib
>>>>>> libsvn_repos-1.0.dylib libsvnjavahl-1.0.dylib
>>>>>> libaprutil-1.0.2.8.dylib
>>>>>> libpcap.a
>>>>>> libsvn_fs_base-1.dylib
>>>>>> libsvn_repos-1.dylib libsvnjavahl-1.dylib
>>>>>> libaprutil-1.0.dylib
>>>>>> libstreams.a
>>>>>> libsvn_fs_fs-1.0.0.0.dylib
>>>>>> libsvn_subr-1.0.0.0.dylib libulockmgr.0.0.0.dylib
>>>>>> libaprutil-1.dylib
>>>>>> libstreams_debug.a
>>>>>> libsvn_fs_fs-1.0.dylib
>>>>>> libsvn_subr-1.0.dylib libulockmgr.0.dylib
>>>>>> libdb-4.5.dylib
>>>>>> libstreams_profile.a
>>>>>> libsvn_fs_fs-1.dylib
>>>>>> libsvn_subr-1.dylib libulockmgr.a
>>>>>> libdb-4.dylib
>>>>>> libsvn_client-1.0.0.0.dylib
>>>>>> libsvn_ra-1.0.0.0.dylib
>>>>>> libsvn_swig_perl-1.0.0.0.dylib libulockmgr.dylib
>>>>>> libdb.dylib
>>>>>> libsvn_client-1.0.dylib
>>>>>> libsvn_ra-1.0.dylib
>>>>>> libsvn_swig_perl-1.0.dylib libulockmgr.la
>>>>>> libexpat.0.1.0.dylib
>>>>>> libsvn_client-1.dylib
>>>>>> libsvn_ra-1.dylib
>>>>>> libsvn_swig_perl-1.dylib pkgconfig
>>>>>> libexpat.0.dylib
>>>>>> libsvn_delta-1.0.0.0.dylib
>>>>>> libsvn_ra_dav-1.0.0.0.dylib
>>>>>> libsvn_swig_py-1.0.0.0.dylib svn-apache
>>>>>> libexpat.dylib
>>>>>> libsvn_delta-1.0.dylib
>>>>>> libsvn_ra_dav-1.0.dylib
>>>>>> libsvn_swig_py-1.0.dylib svn-javahl
>>>>>> libfuse.0.0.0.dylib
>>>>>> libsvn_delta-1.dylib
>>>>>> libsvn_ra_dav-1.dylib
>>>>>> libsvn_swig_py-1.dylib svn-perl
>>>>>> libfuse.0.dylib
>>>>>> libsvn_diff-1.0.0.0.dylib
>>>>>> libsvn_ra_local-1.0.0.0.dylib
>>>>>> libsvn_swig_ruby-1.0.0.0.dylib svn-python
>>>>>> libfuse.a
>>>>>> libsvn_diff-1.0.dylib
>>>>>> libsvn_ra_local-1.0.dylib
>>>>>> libsvn_swig_ruby-1.0.dylib svn-ruby
>>>>>> libfuse.dylib
>>>>>> libsvn_diff-1.dylib
>>>>>> libsvn_ra_local-1.dylib libsvn_swig_ruby-1.dylib
>>>>>> libfuse.la
>>>>>> libsvn_fs-1.0.0.0.dylib
>>>>>> libsvn_ra_svn-1.0.0.0.dylib libsvn_wc-1.0.0.0.dylib
>>>>>>
>>>>>> /usr/local/libexec:
>>>>>> gcc sudo_noexec.dylib sudo_noexec.la
>>>>>>
>>>>>> /usr/local/man:
>>>>>> man1 man3 whatis
>>>>>>
>>>>>> /usr/local/sbin:
>>>>>> visudo
>>>>>>
>>>>>> /usr/local/share:
>>>>>> darwinbuild darwinxref doc
>>>>>> html info locale man
>>>>>> $
>>>>>>
>>>>>>
>>>>>> On Dec 14, 2007, at 8:04 PM, Ryan Schmidt wrote:
>>>>>>
>>>>>>> No no -- you need to remove (or temporarily move aside) the
>>>>>>> readline libraries in /usr/local, *not* the readline
>>>>>>> installed by MacPorts into /opt/local, which is perfectly
>>>>>>> fine to have.
>>>>>>>
>>>>>>> On Dec 14, 2007, at 16:54, Charles Darwin wrote:
>>>>>>>
>>>>>>>> $ sudo port uninstall readline
>>>>>>>> ---> Unable to uninstall readline 5.2.007_0, the following
>>>>>>>> ports depend on it:
>>>>>>>> ---> bash
>>>>>>>> ---> gnupg
>>>>>>>> Error: port uninstall failed: Please uninstall the ports
>>>>>>>> that depend on readline first.
>>>>>>>> $ sudo port -f uninstall readline
>>>>>>>> ---> Unable to uninstall readline 5.2.007_0, the following
>>>>>>>> ports depend on it:
>>>>>>>> ---> bash
>>>>>>>> ---> gnupg
>>>>>>>> Warning: Uninstall forced. Proceeding despite dependencies.
>>>>>>>> ---> Deactivating readline 5.2.007_0
>>>>>>>> ---> Uninstalling readline 5.2.007_0
>>>>>>>> $ sudo port install apache2
>>>>>>>> ---> Building db44 with target all
>>>>>>>> Error: Target org.macports.build returned: shell command "
>>>>>>>> cd "/opt/local/var/macports/build/
>>>>>>>> _opt_local_var_macports_sources_rsync.macports.org_release_port
>>>>>>>> s_databases_db44/work/db-4.4.20/build_unix" && make all "
>>>>>>>> returned error 2
>>>>>>>> Command output: /bin/sh ./libtool --mode=compile /usr/bin/
>>>>>>>> gcc-4.0 -c -O2 -I../dist/.. -I/opt/local/include ../dist/../
>>>>>>>> db_dump185/db_dump185.c
>>>>>>>> /usr/bin/gcc-4.0 -c -O2 -I../dist/.. -I/opt/local/
>>>>>>>> include ../dist/../db_dump185/db_dump185.c -fno-common -
>>>>>>>> DPIC -o .libs/db_dump185.o
>>>>>>>> ../dist/../db_dump185/db_dump185.c: In function 'main':
>>>>>>>> ../dist/../db_dump185/db_dump185.c:212: warning: assignment
>>>>>>>> makes pointer from integer without a cast
>>>>>>>> ../dist/../db_dump185/db_dump185.c:214: warning: assignment
>>>>>>>> makes pointer from integer without a cast
>>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: 'struct __db'
>>>>>>>> has no member named 'seq'
>>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: 'R_NEXT'
>>>>>>>> undeclared (first use in this function)
>>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: (Each
>>>>>>>> undeclared identifier is reported only once
>>>>>>>> ../dist/../db_dump185/db_dump185.c:229: error: for each
>>>>>>>> function it appears in.)
>>>>>>>> ../dist/../db_dump185/db_dump185.c:234: error: 'struct __db'
>>>>>>>> has no member named 'seq'
>>>>>>>> ../dist/../db_dump185/db_dump185.c: In function 'db_hash':
>>>>>>>> ../dist/../db_dump185/db_dump185.c:262: error: 'struct __db'
>>>>>>>> has no member named 'internal'
>>>>>>>> ../dist/../db_dump185/db_dump185.c:264: error: 'struct __db'
>>>>>>>> has no member named 'internal'
>>>>>>>> ../dist/../db_dump185/db_dump185.c: In function 'db_btree':
>>>>>>>> ../dist/../db_dump185/db_dump185.c:289: error: 'struct __db'
>>>>>>>> has no member named 'internal'
>>>>>>>> make: *** [db_dump185.lo] Error 1
>>>>>>>>
>>>>>>>> Error: The following dependencies failed to build: apr-util
>>>>>>>> db44 sqlite3 gawk readline
>>>>>>>> Error: Status 1 encountered during processing.
>>>>>>>> $
>>>>>>>>
>>>>>>>> On Dec 14, 2007, at 2:16 PM, Daniel J. Luke wrote:
>>>>>>>>
>>>>>>>>> On Dec 14, 2007, at 12:40 PM, Chris Janton wrote:
>>>>>>>>>> On 2007-12-13 , at 21:08 , Daniel J. Luke wrote:
>>>>>>>>>>>> Error: The following dependencies failed to build: apr-
>>>>>>>>>>>> util db44 sqlite3 gawk openssl
>>>>>>>>>>>> Error: Status 1 encountered during processing.
>>>>>>>>>>>
>>>>>>>>>>> This is probably related to:
>>>>>>>>>>>
>>>>>>>>>>> http://trac.macports.org/projects/macports/ticket/12040
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have the dreaded "readline in /usr/local" problem.
>>>>>>>>>> The resolution to the problem says re-install MacPorts
>>>>>>>>>> from the disk image and selfupdate to the latest version.
>>>>>>>>>
>>>>>>>>> That's the resolution if you are having problems building
>>>>>>>>> MacPorts, not if db44 is having problems.
>>>>>>>>>
>>>>>>>>> I would recommend removing your readline from /usr/local
>>>>>>>>> (perhaps just temporarily) so that db44 can be installed.
>>>>>>>>>
>>>>>>>>>> What happens to the long list of ports that I have active
>>>>>>>>>> when I re-install from the disk image?
>>>>>>>>>>
>>>>>>>>>> mac:/opt system$ sudo du -d 1 -h .
>>>>>>>>>> 689M ./local
>>>>>>>>>> 689M .
>>>>>>>>>
>>>>>>>>> Nothing should happen to them if you were to reinstall
>>>>>>>>> MacPorts (unless you remove /opt/local or files from
>>>>>>>>> within /opt/local), but it doesn't look like you need to
>>>>>>>>> reinstall MacPorts.
>>>>
>>>
>>
>
More information about the macports-users
mailing list