esound won't install
dave at westphila.net
Thu Sep 13 10:46:07 PDT 2007
I posted this same error to the list. Who's the maintainer?
Lenore Horner wrote:
> I tried and then tried installing again to no avail.
> Selfupdate reports everything is up to date.
> Here's what happened.
> [client155-180:~/Documents]% sudo port clean --all esound
> ---> Cleaning esound
> [client155-180:~/Documents]% sudo port install esound
> ---> Fetching esound
> ---> Attempting to fetch esound-0.2.38.tar.bz2 from
> ---> Verifying checksum(s) for esound
> ---> Extracting esound
> ---> Applying patches to esound
> ---> Configuring esound
> ---> Building esound with target all
> Error: Target org.macports.build returned: shell command " cd
> && make all " returned error 2
> Command output: make: *** No rule to make target `all'. Stop.
> Error: Status 1 encountered during processing.
> Time spent in user mode (CPU seconds) : 7.517s
> Time spent in kernel mode (CPU seconds) : 1.791s
> Total time : 0:18.36s
> CPU utilisation (percentage) : 50.6%
> Times the process was swapped : 0
> Times of major page faults : 0
> Times of minor page faults : 0
> Exit 1
> On Sep 13, 2007, at 11:12 AM, markd at macports.org wrote:
>> Lenore Horner <LenoreHorner at sbcglobal.net> writes:
>>> I get the following message. I have emailed the maintainer and had
>>> no response (in 36 hours).
>>> Does anyone know how to work around this. I can't install Gimp until
>>> this works (as far as I know - Gimp installation keeps hanging here).
>>> I get this error both as part of the Gimp installation via MacPorts
>>> and attempting to install esound alone through MacPorts.
>>> I'm use OS X 10.4.10 and MacPorts 1.5.
>>> sudo port install esound
>>> ---> Building esound with target all
>>> Error: Target org.macports.build returned: shell command " cd "/opt/
>>> sound/work/esound-0.2.38" && make all " returned error 2
>>> Command output: make: *** No rule to make target `all'. Stop.
>>> Error: Status 1 encountered during processing.
>>> Exit 1
>> It works for me. Try 'port clean --all esound' and try it again. Also
>> make sure you have done a selfupdate if you haven't done it recently.
> macports-users mailing list
> macports-users at lists.macosforge.org
More information about the macports-users