Installation/port-upgrade problems

[Panagiotis Atmatzidis]

Dear Sir,

On 09 Νοε 2009, at 5:10 μ.μ., Darren Temple wrote:

> Hello macports-users,
>
> I've been trying to install and start using macports recently, for  
> the intention of installing KDE for use of the Kate and Kile  
> programs, but keep running into problems. I had OS X 10.5.8  
> installed initially, with the most recent release of X11 but not the  
> most recent XCode tools, which requires Snow Leopard. I managed to  
> install macports with this setup, but found a problem when I came to  
> use it which issued a message about XCode tools needing updating.  
> Seeing as I was expecting to upgrade to Snow Leopard soon, I thought  
> I'd do this first before trying macports again. My system is now as  
> follows :-
>
> - Snow Leopard (updated to version 10.6.1)
> - XCode tools 3.2.1
> - X11 2.3.4
>
> I have installed Macports using the "easy" disk-image/package  
> method, which seemed to be successful. I next ran the command "sudo  
> port selfupdate" which seemed to work fine, but then running "port  
> upgrade outdated" I get the following :-
>
> *****
>
> Macintosh:~ Ren$ port upgrade outdated
> MacPorts running without privileges. You may be unable to complete  
> certain actions (eg install).
> --->  Computing dependencies for openssl
> MacPorts running without privileges. You may be unable to complete  
> certain actions (eg install).
> MacPorts running without privileges. You may be unable to complete  
> certain actions (eg install).
> MacPorts running without privileges. You may be unable to complete  
> certain actions (eg install).
> MacPorts running without privileges. You may be unable to complete  
> certain actions (eg install).
> MacPorts running without privileges. You may be unable to complete  
> certain actions (eg install).
> MacPorts running without privileges. You may be unable to complete  
> certain actions (eg install).
> --->  Building openssl
> Error: Target org.macports.build returned: shell command " cd "/ 
> Users/Ren/.macports/opt/local/var/macports/build/ 
> _opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_openssl 
> /work/openssl-0.9.8l" && /usr/bin/make all " returned error 2
> Command output: ld: warning: in /opt/local/lib/libz.dylib, file is  
> not of required architecture
> Undefined symbols:
> "_inflateEnd", referenced from:
>     _bio_zlib_free in libcrypto.a(c_zlib.o)
>     _zlib_stateful_free_ex_data in libcrypto.a(c_zlib.o)
> "_deflate", referenced from:
>     _bio_zlib_ctrl in libcrypto.a(c_zlib.o)
>     _bio_zlib_write in libcrypto.a(c_zlib.o)
>     _zlib_stateful_compress_block in libcrypto.a(c_zlib.o)
> "_deflateEnd", referenced from:
>     _bio_zlib_free in libcrypto.a(c_zlib.o)
>     _zlib_stateful_free_ex_data in libcrypto.a(c_zlib.o)
> "_inflateInit_", referenced from:
>     _bio_zlib_read in libcrypto.a(c_zlib.o)
>     _zlib_stateful_init in libcrypto.a(c_zlib.o)
> "_zError", referenced from:
>     _bio_zlib_ctrl in libcrypto.a(c_zlib.o)
>     _bio_zlib_read in libcrypto.a(c_zlib.o)
>     _bio_zlib_write in libcrypto.a(c_zlib.o)
> "_deflateInit_", referenced from:
>     _bio_zlib_write in libcrypto.a(c_zlib.o)
>     _zlib_stateful_init in libcrypto.a(c_zlib.o)
> "_inflate", referenced from:
>     _bio_zlib_read in libcrypto.a(c_zlib.o)
>     _zlib_stateful_expand_block in libcrypto.a(c_zlib.o)
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[2]: *** [link_a.darwin] Error 1
> make[1]: *** [do_darwin-shared] Error 2
> make: *** [libcrypto.0.9.8.dylib] Error 2
>
> Error: Unable to upgrade port: 1
>
> *****
>
> Following this, I tried installing the "kdebase4" port, just to see  
> if macports would work regardless of this last message. Here is the  
> result of this action :-
>
> *****
>
> Macintosh:~ Ren$ sudo port install kdebase4
> Password:
> Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0,  
> even though installed variants "" do not match "+darwin_10". Use  
> 'upgrade --enforce-variants' to switch to the requested variants.
> Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even  
> though installed variants "" do not match "+darwin_10". Use 'upgrade  
> --enforce-variants' to switch to the requested variants.
> --->  Computing dependencies for openssl
> --->  Building openssl
> Error: Target org.macports.build returned: shell command " cd "/opt/ 
> local/var/macports/build/ 
> _opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_openssl 
> /work/openssl-0.9.8l" && /usr/bin/make all " returned error 2
> Command output: ld: warning: in /opt/local/lib/libz.dylib, file is  
> not of required architecture
> Undefined symbols:
> "_inflateEnd", referenced from:
>     _bio_zlib_free in libcrypto.a(c_zlib.o)
>     _zlib_stateful_free_ex_data in libcrypto.a(c_zlib.o)
> "_deflate", referenced from:
>     _bio_zlib_ctrl in libcrypto.a(c_zlib.o)
>     _bio_zlib_write in libcrypto.a(c_zlib.o)
>     _zlib_stateful_compress_block in libcrypto.a(c_zlib.o)
> "_deflateEnd", referenced from:
>     _bio_zlib_free in libcrypto.a(c_zlib.o)
>     _zlib_stateful_free_ex_data in libcrypto.a(c_zlib.o)
> "_inflateInit_", referenced from:
>     _bio_zlib_read in libcrypto.a(c_zlib.o)
>     _zlib_stateful_init in libcrypto.a(c_zlib.o)
> "_zError", referenced from:
>     _bio_zlib_ctrl in libcrypto.a(c_zlib.o)
>     _bio_zlib_read in libcrypto.a(c_zlib.o)
>     _bio_zlib_write in libcrypto.a(c_zlib.o)
> "_deflateInit_", referenced from:
>     _bio_zlib_write in libcrypto.a(c_zlib.o)
>     _zlib_stateful_init in libcrypto.a(c_zlib.o)
> "_inflate", referenced from:
>     _bio_zlib_read in libcrypto.a(c_zlib.o)
>     _zlib_stateful_expand_block in libcrypto.a(c_zlib.o)
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[2]: *** [link_a.darwin] Error 1
> make[1]: *** [do_darwin-shared] Error 2
> make: *** [libcrypto.0.9.8.dylib] Error 2
>
> Error: Unable to upgrade port: 1
> Error: Unable to execute port: upgrade cmake failed
>
> *****
>
> Hopefully someone has some advice about what to do here. I've looked  
> through a lot of online help information but haven't found anything  
> which seems to address this problem. Please bear in mind I am not a  
> fluent command-line/UNIX user, and am still very much feeling my way  
> around. Any help would be much appreciated, including help on how to  
> understand what the problem is and what the error messages mean, not  
> just how to solve it, for the benefit of my education!
>
> Regards,
> Darren
>
>
> This message has been scanned for viruses by BlackSpider MailControl  
> - www.blackspider.com
> _______________________________________________
> macports-users mailing list
> macports-users at lists.macosforge.org
> http://lists.macosforge.org/mailman/listinfo.cgi/macports-users


did you try $ sudo port upgrade --enforce-variants outdated ??

Panagiotis (atmosx) Atmatzidis

email:	atma at convalesco.org
URL:	http://www.convalesco.org
GnuPG key id: 0xFC4E8BB4
--
The wise man said: "Never argue with an idiot. They bring you down to  
their level and beat you with experience."