help with installing/updating "gettext" & other files in 64-bit snow leopard architecture

Wed Aug 4 23:50:40 PDT 2010

hi all,

ok, here are the results —>

port -v installed
The following ports are currently installed:
  audiofile @0.2.7_0 platform='darwin 10' archs='x86_64'
  autoconf @2.65_2 (active) platform='darwin 10' archs='noarch'
  automake @1.11.1_0 (active) platform='darwin 10' archs='noarch'
  bison @2.4.2_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  boost-jam @3.1.18_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  bzip2 @1.0.5_3+universal (active) platform='darwin 10' archs='i386 x86_64'
  bzr @2.1.2_0 (active) platform='darwin 10' archs='x86_64'
  curl @7.21.0_1+ssl+universal (active) platform='darwin 10' archs='i386 x86_64'
  curl-ca-bundle @7.21.0_1 (active) platform='darwin 10' archs='noarch'
  db46 @4.6.21_6+universal (active) platform='darwin 10' archs='i386 x86_64'
  expat @2.0.1_0 platform='darwin 10' archs='x86_64'
  expat @2.0.1_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  fontconfig @2.8.0_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  freetype @2.4.1_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  gdbm @1.8.3_2+universal (active) platform='darwin 10' archs='i386 x86_64'
  gettext @0.18.1.1_2 platform='darwin 10' archs='x86_64'
  gettext @0.18.1.1_2+universal (active) platform='darwin 10' archs='i386 x86_64'
  glib2 @2.24.1_0 platform='darwin 10' archs='x86_64'
  glib2 @2.24.1_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  gperf @3.0.4_0 platform='darwin 10' archs='x86_64'
  gperf @3.0.4_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  help2man @1.38.2_0 (active) platform='darwin 10' archs='x86_64'
  jpeg @8b_0 platform='darwin 10' archs='x86_64'
  jpeg @8b_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  libao @1.0.0_0 platform='darwin 10' archs='x86_64'
  libevent @1.4.14b_0 platform='darwin 10' archs='x86_64'
  libevent @1.4.14b_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  libiconv @1.13.1_0 platform='darwin 10' archs='x86_64'
  libiconv @1.13.1_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  libidn @1.19_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  libogg @1.2.0_0 platform='darwin 10' archs='x86_64'
  libsdl @1.2.14_8+universal (active) platform='darwin 10' archs='i386 x86_64'
  libtool @2.2.10_0 platform='darwin 10' archs='x86_64'
  libtool @2.2.10_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  lzmautils @4.32.7_1+universal (active) platform='darwin 10' archs='i386 x86_64'
  m4 @1.4.14_0 platform='darwin 10' archs='x86_64'
  m4 @1.4.14_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  ncurses @5.7_0 platform='darwin 10' archs='x86_64'
  ncurses @5.7_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  ncursesw @5.7_0 platform='darwin 10' archs='x86_64'
  ncursesw @5.7_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  nspr @4.8.4_0 (active) platform='darwin 10' archs='x86_64'
  nss @3.12.6_0 platform='darwin 10' archs='x86_64'
  openssl @1.0.0a_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  p5-locale-gettext @1.05_2 (active) platform='darwin 10' archs='x86_64'
  p5-xml-parser @2.36_0 platform='darwin 10' archs='x86_64'
  pcre @8.10_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  perl5 @5.8.9_0 (active) platform='darwin 10' archs='noarch'
  perl5.8 @5.8.9_3 platform='darwin 10' archs='x86_64'
  perl5.8 @5.8.9_3+universal (active) platform='darwin 10' archs='i386 x86_64'
  pkgconfig @0.25_0 platform='darwin 10' archs='x86_64'
  pkgconfig @0.25_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  py26-crypto @2.0.1_1+universal (active) platform='darwin 10' archs='i386 x86_64'
  py26-curl @7.19.0_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  py26-distribute @0.6.14_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  py26-docutils @0.7_0 (active) platform='darwin 10' archs='noarch'
  py26-paramiko @1.7.6_0 (active) platform='darwin 10' archs='noarch'
  py26-pyrex @0.9.9_0 (active) platform='darwin 10' archs='noarch'
  py26-roman @1.4.0_0 (active) platform='darwin 10' archs='noarch'
  python26 @2.6.5_3+universal (active) platform='darwin 10' archs='i386 x86_64'
  readline @6.1.000_1 platform='darwin 10' archs='x86_64'
  readline @6.1.000_1+universal (active) platform='darwin 10' archs='i386 x86_64'
  rfksay @0.1_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  smpeg @0.4.4_8+universal (active) platform='darwin 10' archs='i386 x86_64'
  sqlite3 @3.6.23.1_0 platform='darwin 10' archs='x86_64'
  sqlite3 @3.6.23.1_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  tcl @8.5.8_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  texinfo @4.13_2+universal (active) platform='darwin 10' archs='i386 x86_64'
  tiff @3.9.4_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  tk @8.5.8_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  Xft2 @2.1.14_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  xmlcatmgr @2.2_1+universal (active) platform='darwin 10' archs='i386 x86_64'
  xorg-bigreqsproto @1.1.0_0 (active) platform='darwin 10' archs='noarch'
  xorg-inputproto @2.0_0 (active) platform='darwin 10' archs='noarch'
  xorg-kbproto @1.0.4_0 (active) platform='darwin 10' archs='noarch'
  xorg-libX11 @1.3.4_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  xorg-libXau @1.0.6_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  xorg-libXdmcp @1.0.3_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  xorg-libXext @1.1.2_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  xorg-libXrandr @1.3.0_1+universal (active) platform='darwin 10' archs='i386 x86_64'
  xorg-libXScrnSaver @1.2.0_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  xorg-randrproto @1.3.1_0 (active) platform='darwin 10' archs='noarch'
  xorg-renderproto @0.11_0 (active) platform='darwin 10' archs='noarch'
  xorg-scrnsaverproto @1.2.0_0 (active) platform='darwin 10' archs='noarch'
  xorg-util-macros @1.10.0_0 (active) platform='darwin 10' archs='noarch'
  xorg-xcmiscproto @1.2.0_0 (active) platform='darwin 10' archs='noarch'
  xorg-xextproto @7.1.1_0 (active) platform='darwin 10' archs='noarch'
  xorg-xf86bigfontproto @1.2.0_0 (active) platform='darwin 10' archs='noarch'
  xorg-xproto @7.0.17_0 (active) platform='darwin 10' archs='noarch'
  xorg-xtrans @1.2.5_0 (active) platform='darwin 10' archs='noarch'
  xrender @0.9.6_0+universal (active) platform='darwin 10' archs='i386 x86_64'
  zlib @1.2.5_0+universal (active) platform='darwin 10' archs='i386 x86_64'

... and the reason you're seeing extra libraries is because of what i said i was doing before — i ran the instructions, at http://trac.macports.org/wiki/Migration, inlcuding the experiemental "reinstall ports" script. that ran fine up to my "pkgconfig" install, where it failed with —>

port deactivate failed: Registry error: pkgconfig not registered as installed & active.
    while executing
"install_ports $operationList"
    (file "./restore_ports.tcl" line 259)

so i installed that and the final half-dozen or so files manually with the "+universal" switch. i've also installed a number of files from the instructions at http://drizzle.org/wiki/Compiling/MacOS_X & http://drizzle.org/wiki/Compiling#libdrizzle that are dependencies required for this install.

hope this helps, and thank you again for your responses.

sincerely,

—  faddah steve yuetsu wolf
    portland, oregon
    503-449-0531 - iPhone
    my_biz at me.com

On Aug 4, 2010, at 11:25 PM, Ryan Schmidt wrote:

> 
> On Aug 5, 2010, at 01:22, Faddah Steve Yuetsu Wolf wrote:
> 
>> well, it's installed *now,* since i installed it this afternoon.
>> 
>> result:
>> 
>> django-3:drizzle yuetsu$ port installed
>> The following ports are currently installed:
> 
> [snip]
> 
>> ... does that help? please let me know. and i thank you and everyone else for their responses.
> 
> More helpful would be the verbose output, from "port -v installed"; that would tell us what architectures, if any, MacPorts thinks it installed all those ports for.

On Aug 4, 2010, at 11:25 PM, Ryan Schmidt wrote:

> 
> On Aug 5, 2010, at 01:22, Faddah Steve Yuetsu Wolf wrote:
> 
>> well, it's installed *now,* since i installed it this afternoon.
>> 
>> result:
>> 
>> django-3:drizzle yuetsu$ port installed
>> The following ports are currently installed:
> 
> [snip]
> 
>> ... does that help? please let me know. and i thank you and everyone else for their responses.
> 
> More helpful would be the verbose output, from "port -v installed"; that would tell us what architectures, if any, MacPorts thinks it installed all those ports for.
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20100804/70bde00e/attachment.html>