Issue on atk when installing winetricks

[Dominik Reichardt]

There is an open ticket on atk that it fails to build universal. Noticed that as well earlier ;)

Dom

Am 19.02.2011 um 17:58 schrieb Firman Rauf <vii_man at yahoo.co.id>:

> Hi, I am new to macport and I need a help in installing winetricks using macports.
> I just run the usual command
> 
> sudo port install winetricks
> 
> and when it installed atk as one of its dependencies I got this error
> 
> Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details)
> Error: Failed to install atk
> Log for atk is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/main.log
> Error: The following dependencies were not installed: zenity gtk2 atk gdk-pixbuf2 jasper pango Xft2 cairo libpixman shared-mime-info xorg-libXdamage xorg-damageproto libnotify dbus-glib
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> 
> 
> I have cleaned atk and reinstall it again, but got the same error message. Any suggestion for my problem?
> 
> Here is the atk installation log
> 
> version:1
> :debug:main Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk/work
> :debug:main Executing org.macports.main (atk)
> :msg:main --->  Fetching atk
> :debug:fetch fetch phase started at Sat Feb 19 23:41:39 WIT 2011
> :debug:fetch Executing org.macports.fetch (atk)
> :msg:fetch --->  Verifying checksum(s) for atk
> :debug:checksum checksum phase started at Sat Feb 19 23:41:39 WIT 2011
> :debug:checksum Executing org.macports.checksum (atk)
> :info:checksum --->  Checksumming atk-1.33.6.tar.bz2
> :debug:checksum Correct (md5) checksum for atk-1.33.6.tar.bz2
> :debug:checksum Correct (sha1) checksum for atk-1.33.6.tar.bz2
> :debug:checksum Correct (rmd160) checksum for atk-1.33.6.tar.bz2
> :debug:checksum setting option extract.cmd to /usr/bin/bzip2
> :msg:checksum --->  Extracting atk
> :debug:extract extract phase started at Sat Feb 19 23:41:39 WIT 2011
> :debug:extract Executing org.macports.extract (atk)
> :info:extract --->  Extracting atk-1.33.6.tar.bz2
> :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/atk/atk-1.33.6.tar.bz2'
> :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
> :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/atk/atk-1.33.6.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -'
> :debug:patch patch phase started at Sat Feb 19 23:41:40 WIT 2011
> :debug:patch Executing org.macports.patch (atk)
> :msg:patch --->  Configuring atk
> :debug:patch Using compiler 'Mac OS X gcc 4.2'
> :debug:configure configure phase started at Sat Feb 19 23:41:40 WIT 2011
> :debug:configure Executing proc-pre-org.macports.configure-configure-0
> :debug:configure Executing org.macports.configure (atk)
> :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
> :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work/atk-1.33.6" && ./configure --prefix=/opt/local --enable-static --enable-introspection'
> :info:configure checking for a BSD-compatible install... /usr/bin/install -c
> :info:configure checking whether build environment is sane... yes
> :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d
> :info:configure checking for gawk... no
> :info:configure checking for mawk... no
> :info:configure checking for nawk... no
> :info:configure checking for awk... awk
> :info:configure checking whether make sets $(MAKE)... yes
> :info:configure checking for gcc... /usr/bin/gcc-4.2
> :info:configure checking whether the C compiler works... yes
> :info:configure checking for C compiler default output file name... a.out
> :info:configure checking for suffix of executables... 
> :info:configure checking whether we are cross compiling... no
> :info:configure checking for suffix of object files... o
> :info:configure checking whether we are using the GNU C compiler... yes
> :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
> :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed
> :info:configure checking for style of include used by make... GNU
> :info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3
> :info:configure checking build system type... x86_64-apple-darwin10.6.0
> :info:configure checking host system type... x86_64-apple-darwin10.6.0
> :info:configure checking for a sed that does not truncate output... /usr/bin/sed
> :info:configure checking for grep that handles long lines and -e... /usr/bin/grep
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for fgrep... /usr/bin/grep -F
> :info:configure checking for ld used by /usr/bin/gcc-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
> :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no
> :info:configure checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm
> :info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
> :info:configure checking whether ln -s works... yes
> :info:configure checking the maximum length of command line arguments... 196608
> :info:configure checking whether the shell understands some XSI constructs... yes
> :info:configure checking whether the shell understands "+="... yes
> :info:configure checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r
> :info:configure checking for objdump... no
> :info:configure checking how to recognize dependent libraries... pass_all
> :info:configure checking for ar... ar
> :info:configure checking for strip... strip
> :info:configure checking for ranlib... ranlib
> :info:configure checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object... ok
> :info:configure checking for dsymutil... dsymutil
> :info:configure checking for nmedit... nmedit
> :info:configure checking for lipo... lipo
> :info:configure checking for otool... otool
> :info:configure checking for otool64... no
> :info:configure checking for -single_module linker flag... yes
> :info:configure checking for -exported_symbols_list linker flag... yes
> :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/stat.h... yes
> :info:configure checking for stdlib.h... yes
> :info:configure checking for string.h... yes
> :info:configure checking for memory.h... yes
> :info:configure checking for strings.h... yes
> :info:configure checking for inttypes.h... yes
> :info:configure checking for stdint.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking for dlfcn.h... yes
> :info:configure checking for objdir... .libs
> :info:configure checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions... no
> :info:configure checking for /usr/bin/gcc-4.2 option to produce PIC... -fno-common -DPIC
> :info:configure checking if /usr/bin/gcc-4.2 PIC flag -fno-common -DPIC works... yes
> :info:configure checking if /usr/bin/gcc-4.2 static flag -static works... no
> :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes
> :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... (cached) yes
> :info:configure checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin10.6.0 dyld
> :info:configure checking how to hardcode library paths into programs... immediate
> :info:configure checking whether stripping libraries is possible... yes
> :info:configure checking if libtool supports shared libraries... yes
> :info:configure checking whether to build shared libraries... yes
> :info:configure checking whether to build static libraries... yes
> :info:configure checking for bind_textdomain_codeset... no
> :info:configure checking for some Win32 platform... no
> :info:configure checking for native Win32 platform... no
> :info:configure checking for aclocal flags... 
> :info:configure checking for pkg-config... /opt/local/bin/pkg-config
> :info:configure checking pkg-config is at least version 0.16... yes
> :info:configure checking for GLIB - version >= 2.0.0... yes (version 2.26.1)
> :info:configure checking for DEP... yes
> :info:configure checking locale.h usability... yes
> :info:configure checking locale.h presence... yes
> :info:configure checking for locale.h... yes
> :info:configure checking for LC_MESSAGES... yes
> :info:configure checking libintl.h usability... yes
> :info:configure checking libintl.h presence... yes
> :info:configure checking for libintl.h... yes
> :info:configure checking for ngettext in libc... no
> :info:configure checking for bindtextdomain in -lintl... yes
> :info:configure checking for ngettext in -lintl... yes
> :info:configure checking for dgettext in -lintl... yes
> :info:configure checking for bind_textdomain_codeset... yes
> :info:configure checking for msgfmt... /opt/local/bin/msgfmt
> :info:configure checking for dcgettext... yes
> :info:configure checking if msgfmt accepts -c... yes
> :info:configure checking for gmsgfmt... /opt/local/bin/msgfmt
> :info:configure checking for xgettext... /opt/local/bin/xgettext
> :info:configure checking for catalogs to be installed...  af am ar as ast az be be at latin bg bn bn_IN bs ca ca at valencia cs cy da de dz el en_CA en_GB en at shaw eo es et eu fa fi fr ga gl gu he hi hr hu hy id is it ja ka kk kn ko ku li lt lv mai mk ml mn mr ms nb ne nl nn oc or pa pl ps pt pt_BR ro ru rw si sk sl sq sr sr at latin sr at ije sv ta te th tk tr tt ug uk vi wa xh yi zh_CN zh_HK zh_TW
> :info:configure checking for gobject-introspection... configure: error: gobject-introspection-1.0 is not installed
> :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work/atk-1.33.6" && ./configure --prefix=/opt/local --enable-static --enable-introspection " returned error 1
> :error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details)
> :debug:configure Backtrace: configure failure: shell command failed (see log for details)
>     while executing
> "$procedure $targetname"
> :info:configure Warning: the following items did not execute (for atk): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
> :error:configure Failed to install atk
> :notice:configure Log for atk is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/main.log
> 
> 
> _______________________________________________
> macports-users mailing list
> macports-users at lists.macosforge.org
> http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20110219/3d355bc9/attachment.html>