upgrading coreutils

Tue Nov 29 21:12:23 PST 2011

thanks again.i did port clean coreutils and port --v install coreutils. again the installation failed. i am attaching the main.log file contents below.

version:1:debug:main epoch: in tree: 0 installed: 0:debug:main xz 5.0.3_0 exists in the ports tree:debug:main xz 5.0.3_0  is the latest installed:debug:main xz 5.0.3_0  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/xz:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! xz 5.0.3_0 >= xz 5.0.3_0:debug:main epoch: in tree: 0 installed: 0:debug:main libiconv 1.14_0 exists in the ports tree:debug:main libiconv 1.14_0  is the latest installed:debug:main libiconv 1.14_0  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure.
 Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0:debug:main epoch: in tree: 0 installed: 0:debug:main gettext 0.18.1.1_2 exists in the ports tree:debug:main gettext 0.18.1.1_2  is the latest installed:debug:main gettext 0.18.1.1_2  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load
 registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2:debug:main epoch: in tree: 0 installed:
 0:debug:main ncurses 5.9_1 exists in the ports tree:debug:main ncurses 5.9_1  is the latest installed:debug:main ncurses 5.9_1  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1:debug:main epoch: in tree: 0 installed: 0:debug:main expat 2.0.1_1 exists in the ports tree:debug:main expat 2.0.1_1  is the latest installed:debug:main expat 2.0.1_1  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target
 override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1:debug:main epoch: in tree: 1 installed: 1:debug:main autoconf 2.68_2 exists in the ports tree:debug:main autoconf 2.68_2  is the latest installed:debug:main autoconf 2.68_2  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target
 override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main only one arch supported, so not adding the default universal variant:debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2:debug:main epoch: in tree: 0 installed: 0:debug:main perl5 5.12.3_1 exists in the ports tree:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed:debug:main perl5 5.12.3_1 +perl5_12 is active:debug:main Merging existing variants '+perl5_12' into variants:debug:main new fully merged portvariants: perl5_12 +:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides
 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main universal_variant is false, so not adding the default universal variant:debug:main Executing variant perl5_12 provides perl5_12:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1:debug:main epoch: in tree: 0 installed: 0:debug:main perl5.12 5.12.3_2 exists in the ports tree:debug:main perl5.12 5.12.3_2  is the latest installed:debug:main perl5.12 5.12.3_2  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override
 will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2:debug:main epoch: in tree: 0 installed: 0:debug:main gdbm 1.10_0 exists in the ports tree:debug:main gdbm 1.10_0  is the latest installed:debug:main gdbm 1.10_0  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm:debug:main OS darwin/10.8.0
 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0:debug:main epoch: in tree: 0 installed: 0:debug:main m4 1.4.16_0 exists in the ports tree:debug:main m4 1.4.16_0  is the latest
 installed:debug:main m4 1.4.16_0  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0:debug:main epoch: in
 tree: 0 installed: 0:debug:main help2man 1.40.4_1 exists in the ports tree:debug:main help2man 1.40.4_1  is the latest installed:debug:main help2man 1.40.4_1  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1:debug:main epoch: in tree: 0 installed: 0:debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree:debug:main p5.12-locale-gettext 1.50.0_6  is the latest installed:debug:main p5.12-locale-gettext 1.50.0_6  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl:debug:main Re-registering default for livecheck.version:debug:main Re-registering default for configure.universal_args:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12-locale-gettext 1.50.0_6:debug:main epoch: in tree: 0 installed: 0:debug:main automake 1.11.1_0 exists in the ports tree:debug:main automake 1.11.1_0  is the latest installed:debug:main automake 1.11.1_0  is active:debug:main Merging existing variants '' into
 variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main only one arch supported, so not adding the default universal variant:debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0:debug:main epoch: in tree: 0 installed: 0:debug:main libtool 2.4.2_0 exists in the ports tree:debug:main libtool 2.4.2_0  is the latest installed:debug:main libtool 2.4.2_0  is active:debug:main Merging existing
 variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0:debug:main epoch: in tree: 0 installed: 0:debug:main gmp 5.0.2_1 exists in the
 ports tree:debug:main gmp 5.0.2_1  is the latest installed:debug:main gmp 5.0.2_1  is active:debug:main Merging existing variants '' into variants:debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main universal variant already exists, so not adding the default one:debug:main No need to upgrade! gmp 5.0.2_1 >= gmp 5.0.2_1:msg:main --->  Computing dependencies for coreutils:info:main .:debug:main Searching for dependency: xz:debug:main Found Dependency: receipt exists for xz:debug:main Searching for dependency: autoconf:debug:main Found Dependency: receipt exists for autoconf:debug:main Searching for dependency: automake:debug:main Found Dependency: receipt exists for automake:debug:main Searching for dependency: libtool:debug:main Found Dependency: receipt exists for libtool:debug:main Searching for dependency: gettext:debug:main Found Dependency: receipt exists for gettext:debug:main Searching for dependency: gmp:debug:main Found Dependency: receipt exists for gmp:debug:main Searching for dependency: libiconv:debug:main Found
 Dependency: receipt exists for libiconv:msg:main :debug:main Executing org.macports.main (coreutils):debug:main Skipping completed org.macports.archivefetch (coreutils):debug:main Skipping completed org.macports.fetch (coreutils):debug:main Skipping completed org.macports.checksum (coreutils):debug:main Skipping completed org.macports.extract (coreutils):debug:main Skipping completed org.macports.patch (coreutils):debug:configure configure phase started at Wed Nov 30 10:23:55 IST 2011:notice:configure --->  Configuring coreutils:debug:configure Using compiler 'Mac OS X gcc 4.2':debug:configure Executing org.macports.configure (coreutils):debug:configure Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_coreutils/coreutils/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6':debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_coreutils/coreutils/work/coreutils-8.14" && autoreconf --install -fvi':debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_coreutils/coreutils/work/coreutils-8.14" && autoreconf --install -fvi :info:configure autoreconf: Entering directory `.':info:configure autoreconf: running: autopoint --force:info:configure autoreconf: running: aclocal --force -I m4:info:configure configure.ac:36: warning: macro `AM_SILENT_RULES' not found in library:info:configure configure.ac:21: error: Autoconf version 2.64 or higher is required:info:configure configure.ac:21: the top level:info:configure autom4te: /Developer/usr/bin/gm4 failed with exit status: 63:info:configure aclocal:
 /Developer/usr/bin/autom4te failed with exit status: 63:info:configure autoreconf: aclocal failed with exit status: 63:info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_coreutils/coreutils/work/coreutils-8.14" && autoreconf --install -fvi " returned error 63:error:configure Target org.macports.configure returned: autoreconf failure: shell command failed (see log for details):debug:configure Backtrace: autoreconf failure: shell command failed (see log for details)    while executing"$procedure $targetname":info:configure Warning: the following items did not execute (for coreutils): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install:notice:configure Log for coreutils is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_coreutils/coreutils/main.log 
--- On Tue, 11/29/11, Ryan Schmidt <ryandesign at macports.org> wrote:

From: Ryan Schmidt <ryandesign at macports.org>
Subject: Re: upgrading coreutils
To: "deva seetharam" <tagsense at yahoo.com>
Cc: macports-users at lists.macosforge.org
Date: Tuesday, November 29, 2011, 10:10 PM

On Nov 29, 2011, at 20:44, deva seetharam wrote:

> as per your recommendation, i ran "port clean installed" and "port -vv upgrade outdated".

[snip]

> :debug:main Skipping completed org.macports.archivefetch (coreutils)
> :debug:main Skipping completed org.macports.fetch (coreutils)
> :debug:main Skipping completed org.macports.checksum (coreutils)
> :debug:main Skipping completed org.macports.extract (coreutils)
> :debug:main Skipping completed org.macports.patch (coreutils)
> :debug:configure configure phase started at Wed Nov 30 08:06:22 IST 2011
> :notice:configure --->  Configuring coreutils

Please actually clean the failing port: coreutils.

sudo port clean coreutils

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-users/attachments/20111129/6726a154/attachment.html>