Error: Status 1 encountered during processing.

bunk3m bunk3m at gmail.com
Sun Sep 18 10:37:27 PDT 2011


Hi.

I've been working on this by myself with no success so far.

I got so frustrated, I deleted everything in the /opt/ and followed the
instructions to completely remove macports.  Then I did a fresh install
of Apple X11, xDarwin, and macports 2.0.3 (Snow Leopard).  Xcode 3.2.6
is already installed.

After all that I expected Macports to run correctly.  No luck.

I can manually install any package that has no dependencies using ie.
sudo port -s install gperf or sudo port -s install expat.  But doing
sudo port install ffmpeg --nonfree --enable-libx264 --enable-libvpx will
NOT work.

I get the same error messages as before.

Below please find

1) Output from terminal running command
2) Log info from install ffmpeg
3) Log info from dependency install of libiconv

This is probably more info than needed but I thought perhaps more is
better???

The part that has me stumped is from the dependency install of libiconv
(log (3))
---quote---
:debug:archivefetch couldn't open
"/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex":
no such file or directory
    while executing
"open [file join $dir tclIndex]"
---end quote---

This file doesn't exist.  If it is supposed to be there, how should it
have gotten there and how do I get it / get it back.

Thanks in advance for your help.
B

--quote (1)--
sudo port install ffmpeg --nonfree --enable-libx264 --enable-libvpx
Password:
--->  Computing dependencies for ffmpeg
--->  Dependencies to be installed: XviD autoconf help2man gettext
libiconv ncurses ncursesw p5.12-locale-gettext perl5.12 gdbm m4 perl5
perl5 perl5 automake libtool bzip2 dirac cppunit gmake lame libogg
libsdl xorg-libXext pkgconfig glib2 zlib xorg-libX11 xorg-bigreqsproto
xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp
xorg-libxcb python27 db46 openssl python_select readline sqlite3
python27 xorg-libpthread-stubs xorg-xcb-proto libxml2 xorg-util-macros
xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans
xorg-libXrandr xorg-randrproto xrender xorg-renderproto libtheora
libvorbis libvpx yasm schroedinger orc speex texi2html x264
--->  Fetching archive for libiconv
--->  Attempting to fetch libiconv-1.14_0.darwin_10.x86_64.tbz2 from
http://packages.macports.org/libiconv
--->  Attempting to fetch libiconv-1.14_0.darwin_10.x86_64.tbz2.rmd160
from http://packages.macports.org/libiconv
Error: Target org.macports.archivefetch returned: Failed to verify
signature for archive!
Error: Failed to install libiconv
Log for libiconv is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_textproc_libiconv/libiconv/main.log
Error: The following dependencies were not installed: XviD autoconf
help2man gettext libiconv ncurses ncursesw p5.12-locale-gettext perl5.12
gdbm m4 perl5 perl5 perl5 automake libtool bzip2 dirac cppunit gmake
lame libogg libsdl xorg-libXext pkgconfig glib2 zlib xorg-libX11
xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto
xorg-libXdmcp xorg-libxcb python27 db46 openssl python_select readline
sqlite3 python27 xorg-libpthread-stubs xorg-xcb-proto libxml2
xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto
xorg-xtrans xorg-libXrandr xorg-randrproto xrender xorg-renderproto
libtheora libvorbis libvpx yasm schroedinger orc speex texi2html x264
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
--end quote (1)--

Log file for ffmpeg install shows:
---start quote (2)---
version:1
:msg:main --->  Computing dependencies for ffmpeg:info:main .:debug:main
Checking for conflicts against ffmpeg
:debug:main Searching for dependency: ffmpeg-devel
:debug:main Didn't find receipt, going to depspec regex for: ffmpeg-devel
:debug:main Searching for dependency: pkgconfig
:debug:main Didn't find receipt, going to depspec regex for: pkgconfig
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: gmake
:debug:main Didn't find receipt, going to depspec regex for: gmake
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmake
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: texi2html
:debug:main Didn't find receipt, going to depspec regex for: texi2html
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/texi2html
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: yasm
:debug:main Didn't find receipt, going to depspec regex for: yasm
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/yasm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: lame
:debug:main Didn't find receipt, going to depspec regex for: lame
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/lame
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: libvorbis
:debug:main Didn't find receipt, going to depspec regex for: libvorbis
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libvorbis
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: libogg
:debug:main Didn't find receipt, going to depspec regex for: libogg
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libogg
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: libtheora
:debug:main Didn't find receipt, going to depspec regex for: libtheora
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libtheora
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: dirac
:debug:main Didn't find receipt, going to depspec regex for: dirac
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/dirac
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: schroedinger
:debug:main Didn't find receipt, going to depspec regex for: schroedinger
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/schroedinger
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: speex
:debug:main Didn't find receipt, going to depspec regex for: speex
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/speex
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: XviD
:debug:main Didn't find receipt, going to depspec regex for: XviD
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/XviD
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: x264
:debug:main Didn't find receipt, going to depspec regex for: x264
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/x264
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: libvpx
:debug:main Didn't find receipt, going to depspec regex for: libvpx
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libvpx
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: libsdl
:debug:main Didn't find receipt, going to depspec regex for: libsdl
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libsdl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant x11 provides x11
:debug:main Searching for dependency: bzip2
:debug:main Didn't find receipt, going to depspec regex for: bzip2
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: zlib
:debug:main Didn't find receipt, going to depspec regex for: zlib
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: glib2
:debug:main Didn't find receipt, going to depspec regex for: glib2
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Checking for conflicts against glib2
:debug:main Searching for dependency: glib2-devel
:debug:main Didn't find receipt, going to depspec regex for: glib2-devel
:debug:main Searching for dependency: autoconf
:debug:main Didn't find receipt, going to depspec regex for: autoconf
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: automake
:debug:main Didn't find receipt, going to depspec regex for: automake
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: libtool
:debug:main Didn't find receipt, going to depspec regex for: libtool
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: gettext
:debug:main Didn't find receipt, going to depspec regex for: gettext
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: libiconv
:debug:main Didn't find receipt, going to depspec regex for: libiconv
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: perl5
:debug:main Didn't find receipt, going to depspec regex for: perl5
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:info:main .:debug:main Searching for dependency: perl5
:debug:main Didn't find receipt, going to depspec regex for: perl5
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main Searching for dependency: m4
:debug:main Didn't find receipt, going to depspec regex for: m4
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: help2man
:debug:main Didn't find receipt, going to depspec regex for: help2man
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: perl5.12
:debug:main Didn't find receipt, going to depspec regex for: perl5.12
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: gdbm
:debug:main Didn't find receipt, going to depspec regex for: gdbm
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:info:main .:info:main .:info:main .:debug:main Searching for
dependency: perl5.12
:debug:main Didn't find receipt, going to depspec regex for: perl5.12
:debug:main Searching for dependency: p5.12-locale-gettext
:debug:main Didn't find receipt, going to depspec regex for:
p5.12-locale-gettext
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-locale-gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:info:main .:info:main .:debug:main Searching for
dependency: autoconf
:debug:main Didn't find receipt, going to depspec regex for: autoconf
:debug:main Searching for dependency: perl5
:debug:main Didn't find receipt, going to depspec regex for: perl5
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:info:main .:info:main .:info:main .:info:main .:debug:main Searching
for dependency: ncurses
:debug:main Didn't find receipt, going to depspec regex for: ncurses
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: expat
:debug:main Found Dependency: receipt exists for expat
:info:main .:debug:main Searching for dependency: ncursesw
:debug:main Didn't find receipt, going to depspec regex for: ncursesw
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncursesw
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:info:main .:info:main .:debug:main Searching for dependency: gperf
:debug:main Found Dependency: receipt exists for gperf
:info:main .:info:main .:info:main .:info:main .:info:main .:info:main
.:info:main .:info:main .:info:main .:debug:main Searching for
dependency: cppunit
:debug:main Didn't find receipt, going to depspec regex for: cppunit
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cppunit
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:info:main .:debug:main Searching for dependency: orc
:debug:main Didn't find receipt, going to depspec regex for: orc
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orc
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:info:main .:info:main .:info:main .:info:main .:info:main
.:debug:main Checking for conflicts against libsdl
:debug:main Searching for dependency: libsdl-devel
:debug:main Didn't find receipt, going to depspec regex for: libsdl-devel
:debug:main Searching for dependency: xorg-libXext
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXext
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-libXrandr
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXrandr
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXrandr
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xrender
:debug:main Didn't find receipt, going to depspec regex for: xrender
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:info:main .:debug:main Searching for dependency: xorg-util-macros
:debug:main Didn't find receipt, going to depspec regex for:
xorg-util-macros
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-util-macros
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-libX11
:debug:main Didn't find receipt, going to depspec regex for: xorg-libX11
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-xextproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-xextproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:info:main .:info:main .:debug:main Searching for dependency: xorg-xtrans
:debug:main Didn't find receipt, going to depspec regex for: xorg-xtrans
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xtrans
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-bigreqsproto
:debug:main Didn't find receipt, going to depspec regex for:
xorg-bigreqsproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-bigreqsproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-xcmiscproto
:debug:main Didn't find receipt, going to depspec regex for:
xorg-xcmiscproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcmiscproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-xf86bigfontproto
:debug:main Didn't find receipt, going to depspec regex for:
xorg-xf86bigfontproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xf86bigfontproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-inputproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-inputproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-inputproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-libXdmcp
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXdmcp
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-libXau
:debug:main Didn't find receipt, going to depspec regex for: xorg-libXau
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: xorg-libxcb
:debug:main Didn't find receipt, going to depspec regex for: xorg-libxcb
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python27 provides python27
:debug:main Searching for dependency: xorg-xproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-xproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: xorg-kbproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-kbproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:info:main .:info:main .:info:main .:info:main .:info:main .:info:main
.:info:main .:info:main .:debug:main Searching for dependency:
xorg-xcb-proto
:debug:main Didn't find receipt, going to depspec regex for: xorg-xcb-proto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Executing variant python27 provides python27
:debug:main Searching for dependency: xorg-libpthread-stubs
:debug:main Didn't find receipt, going to depspec regex for:
xorg-libpthread-stubs
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main Searching for dependency: python27
:debug:main Didn't find receipt, going to depspec regex for: python27
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:info:main .:debug:main Searching for dependency: libxml2
:debug:main Didn't find receipt, going to depspec regex for: libxml2
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: python27
:debug:main Didn't find receipt, going to depspec regex for: python27
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:info:main .:info:main .:debug:main Searching for dependency: openssl
:debug:main Didn't find receipt, going to depspec regex for: openssl
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: sqlite3
:debug:main Didn't find receipt, going to depspec regex for: sqlite3
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Searching for dependency: db46
:debug:main Didn't find receipt, going to depspec regex for: db46
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant java provides java
:debug:main Searching for dependency: readline
:debug:main Didn't find receipt, going to depspec regex for: readline
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Searching for dependency: python_select
:debug:main Didn't find receipt, going to depspec regex for: python_select
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default
universal variant
:info:main .:info:main .:info:main .:info:main .:info:main .:info:main
.:info:main .:info:main .:info:main .:info:main .:info:main .:debug:main
Searching for dependency: xorg-randrproto
:debug:main Didn't find receipt, going to depspec regex for: xorg-randrproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-randrproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:info:main .:info:main .:debug:main Searching for dependency:
xorg-renderproto
:debug:main Didn't find receipt, going to depspec regex for:
xorg-renderproto
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-renderproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:info:main .:info:main .:info:main .:msg:main
:msg:main --->  Dependencies to be installed: XviD autoconf help2man
gettext libiconv ncurses ncursesw p5.12-locale-gettext perl5.12 gdbm m4
perl5 perl5 perl5 automake libtool bzip2 dirac cppunit gmake lame libogg
libsdl xorg-libXext pkgconfig glib2 zlib xorg-libX11 xorg-bigreqsproto
xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp
xorg-libxcb python27 db46 openssl python_select readline sqlite3
python27 xorg-libpthread-stubs xorg-xcb-proto libxml2 xorg-util-macros
xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans
xorg-libXrandr xorg-randrproto xrender xorg-renderproto libtheora
libvorbis libvpx yasm schroedinger orc speex texi2html x264
:debug:main Starting logging for libiconv
:error:archivefetch The following dependencies were not installed: XviD
autoconf help2man gettext libiconv ncurses ncursesw p5.12-locale-gettext
perl5.12 gdbm m4 perl5 perl5 perl5 automake libtool bzip2 dirac cppunit
gmake lame libogg libsdl xorg-libXext pkgconfig glib2 zlib xorg-libX11
xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto
xorg-libXdmcp xorg-libxcb python27 db46 openssl python_select readline
sqlite3 python27 xorg-libpthread-stubs xorg-xcb-proto libxml2
xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto
xorg-xtrans xorg-libXrandr xorg-randrproto xrender xorg-renderproto
libtheora libvorbis libvpx yasm schroedinger orc speex texi2html x264
:error:archivefetch Status 1 encountered during processing.
:notice:archivefetch To report a bug, see
<http://guide.macports.org/#project.tickets>
---end quote (2)---

And output from log libiconv
---start quote (3)---
version:1
:debug:main Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_textproc_libiconv/libiconv/work
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv/work
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 503
:debug:main euid changed to: 502
:debug:main Executing org.macports.main (libiconv)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:archivefetch archivefetch phase started at Sun Sep 18 13:22:11
EDT 2011
:msg:archivefetch --->  Fetching archive for libiconv
:debug:archivefetch Executing org.macports.archivefetch (libiconv)
:debug:archivefetch Can't run archivefetch on this port without elevated
privileges. Escalating privileges back to root.
:debug:archivefetch euid changed to: 0. egid changed to: 0.
:debug:archivefetch changing euid/egid - current euid: 0 - current egid: 0
:debug:archivefetch egid changed to: 503
:debug:archivefetch euid changed to: 502
:info:archivefetch --->  libiconv-1.14_0.darwin_10.x86_64.tbz2 doesn't
seem to exist in /opt/local/var/macports/software/libiconv
:msg:archivefetch --->  Attempting to fetch
libiconv-1.14_0.darwin_10.x86_64.tbz2 from
http://packages.macports.org/libiconv
:msg:archivefetch --->  Attempting to fetch
libiconv-1.14_0.darwin_10.x86_64.tbz2.rmd160 from
http://packages.macports.org/libiconv
:debug:archivefetch failed verification with key
/opt/local/share/macports/macports-pubkey.pem
:debug:archivefetch openssl output: Verification Failure
child process exited abnormally
:error:archivefetch Target org.macports.archivefetch returned: Failed to
verify signature for archive!
:debug:archivefetch Backtrace: Failed to verify signature for archive!
    while executing
"portarchivefetch::fetchfiles"
    (procedure "portarchivefetch::archivefetch_main" line 5)
    invoked from within
"$procedure $targetname"
:info:archivefetch Warning: the following items did not execute (for
libiconv): org.macports.activate org.macports.archivefetch
org.macports.fetch org.macports.checksum org.macports.extract
org.macports.patch org.macports.configure org.macports.build
org.macports.destroot org.macports.install
:error:archivefetch Failed to install libiconv
:debug:archivefetch couldn't open
"/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex":
no such file or directory
    while executing
"open [file join $dir tclIndex]"
:notice:archivefetch Log for libiconv is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_textproc_libiconv/libiconv/main.log
---end quote (3)---

On 15.09.2011 21:02 , bunk3m wrote:
> The directory that contains the conf files is:
> 
> /opt/local/etc/macports/
> 
> B
> 
> On 15.09.2011 20:48 , Ryan Schmidt wrote:
>> On Sep 15, 2011, at 13:26, bunk3m wrote:
>>
>>>> If it continues to misbehave, inspect those downloaded files: see if they're HTML or something whacky. Also ensure you have the macports public key:
>>>> $prefix/share/macports/macports-pubkey.pem
>>>>
>>>> And that you're configured to use it:
>>>> $prefix/etc/macports/pubkeys.conf
>>> There are no files in the directory.
>> In what directory?
>>
>>


More information about the macports-users mailing list