smartd automated scanning failing
Ubence Quevedo
thatrat at gmail.com
Thu Dec 4 17:08:42 PST 2014
> On Dec 4, 2014, at 3:46 PM, Bradley Giesbrecht <pixilla at macports.org> wrote:
>
>
> On Nov 27, 2014, at 7:04 AM, Ubence Quevedo <thatrat at gmail.com> wrote:
>
>> Hi All,
>
> Hi from Turlock:)
>
Greetings from Merced!
>> I'm not sure that this is the right place to post this, but it seems that smartmontools that I have installed through port isn't scanning drive when I have the appropriate configuration file at /opt/local/etc/smartd.conf configured.
>>
>> Here's the relevant line to run a short scan at 5AM every morning and then a long scan at 6AM:
>> /dev/disk0 -H -l error -l selftest -f -s (S/../.././05|L/../.././06) -m xxxxxxx at xxxxx.xxx
>>
>> I took a look at the console, and saw the following lines when the scanning was supposed to occur:
>> Nov 25 05:22:24 Ubences-Intel-iMac.local smartd[152]: Authorization, server not available
>> Nov 25 05:22:24 Ubences-Intel-iMac.local smartd[152]: Device: /dev/disk0, execute Short Self-Test failed.
>> Nov 25 06:22:25 Ubences-Intel-iMac.local smartd[152]: Device: /dev/disk0, execute Long Self-Test failed.
>>
>> What stands out to me is the first line "Authorization, server not available".
>>
>> I've tried looking for info on this particular output, but I can't find anything to trace back to how this is occurring?
>
> Can you run smartctl successfully?
> sudo smartctl -P show /dev/disk0
> sudo smartctl -t short /dev/disk0
> sudo smartctl -a /dev/disk0
>
I can run all of those, and I’ve never had to sudo them:
Ubences-Intel-iMac:~ uquevedo$ smartctl -P show /dev/disk0
smartctl 6.2 2013-07-26 r3841 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
Drive found in smartmontools Database. Drive identity strings:
MODEL: WDC WD1002FAEX-00Y9A0
FIRMWARE: 05.01D05
match smartmontools Drive Database entry:
MODEL REGEXP: WDC WD(5002AAL|(64|75)02AAE|((10|15|20)02|4001)FAE)X-.*
FIRMWARE REGEXP: .*
MODEL FAMILY: Western Digital Caviar Black
ATTRIBUTE OPTIONS: None preset; no -v options are required.
Ubences-Intel-iMac:~ uquevedo$ smartctl -t short /dev/disk0
smartctl 6.2 2013-07-26 r3841 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Thu Dec 4 17:00:29 2014
Use smartctl -X to abort test.
Ubences-Intel-iMac:~ uquevedo$ smartctl -a /dev/disk0
smartctl 6.2 2013-07-26 r3841 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Black
Device Model: WDC WD1002FAEX-00Y9A0
Serial Number: [Hiding this on purpose]
LU WWN Device Id: 5 0014ee 2064339e8
Firmware Version: 05.01D05
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Dec 4 17:03:58 2014 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (16860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 13
3 Spin_Up_Time 0x0027 171 170 021 Pre-fail Always - 4433
4 Start_Stop_Count 0x0032 076 076 000 Old_age Always - 24328
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5066
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 079 079 000 Old_age Always - 21823
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 21
193 Load_Cycle_Count 0x0032 192 192 000 Old_age Always - 24306
194 Temperature_Celsius 0x0022 107 081 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5066 -
# 2 Extended offline Completed without error 00% 4673 -
# 3 Extended offline Completed without error 00% 4080 -
# 4 Short offline Completed without error 00% 2987 -
# 5 Extended offline Aborted by host 80% 2985 -
# 6 Short offline Completed without error 00% 2982 -
# 7 Short offline Completed without error 00% 2975 -
# 8 Short offline Aborted by host 90% 2962 -
# 9 Short offline Completed without error 00% 2960 -
#10 Short offline Completed without error 00% 2957 -
#11 Short offline Completed without error 00% 2956 -
#12 Short offline Completed without error 00% 2950 -
#13 Short offline Completed without error 00% 2948 -
#14 Short offline Completed without error 00% 2946 -
#15 Short offline Completed without error 00% 2944 -
#16 Short offline Completed without error 00% 2941 -
#17 Short offline Completed without error 00% 2939 -
#18 Short offline Completed without error 00% 2934 -
#19 Short offline Completed without error 00% 2933 -
#20 Short offline Completed without error 00% 2929 -
#21 Short offline Completed without error 00% 2927 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
As you can see from the Self-test log, the configuration file was all working up to a point and then just stopped.
-Ubence
>
> Regards,
> Bradley Giesbrecht (pixilla)
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.macosforge.org/pipermail/macports-users/attachments/20141204/2ceb875d/attachment.html>
More information about the macports-users
mailing list