OpenModelica?

Mon Apr 16 20:54:57 UTC 2018

As your quoted text shows, +gfortran is not an existing variant for
qrupdate. Choose +gcc7 for example.

David

On Mon, Apr 16, 2018 at 1:50 PM, Murray Eisenberg <murrayeisenberg at gmail.com
> wrote:

> After uninstalling the +atlas variant of octave and its direct or indirect
> deps or dependent’s sundials, SuiteSparse. qrupdate, and arpack, I began
> reinstalling with the +accelerate variant.
>
> I used (with sudo):
>
>   port install octave +app+accelerate+docs+fltk+
> gfortran+graphicsmagick+qt5+sound
>
> but when the octave installation was running it tried to install qrupdate
> and hit error:
>
>   Error: Failed to fetch qrupdate: must set at least one Fortran variant
> (e.g. +gfortran, +gccX, +g95)
>
> So I quit that, cleaned everything, and directly tried...
>
>   port install qrupdate +accelerate +gfortran
>
> … and got same error message that I must set a Fortran variant.
>
> Now I’m puzzled: the qrupdate port says +gfortran is such a variant, then
> fails to accept it.  And in fact:
>
> port info qrupdate
> qrupdate @1.1.2_5 (math)
> Variants:             [+]accelerate, atlas, g95, gcc44, gcc45, gcc46,
> gcc47,
>                       gcc48, gcc49, gcc5, gcc6, [+]gcc7, openblas,
> universal
>
> (I see what Ken Cunningham said in separate message about blowing up
> MacPorts and starting over, but I have quite a number of config files,
> e.g., for apache, mysql, php, phpmyadmin, that I’d hate to set up again;
> that could take days. Unless I misunderstand what Ken said.)
>
> On 16 Apr2018, at 3:55 PM, Adam Dershowitz <dersh at alum.mit.edu> wrote:
>
> As an datapoint, but not completely answering your question.  I have the
> following installed and all working:
>
> sundials @3.1.0_1+accelerate+fortran_klu+gfortran+mpich (active)
> octave @4.2.2_1+accelerate+app+docs+fltk+gfortran+graphicsmagick+qt4+sound
> (active)
> SuiteSparse @4.2.1_4+accelerate (active)
> openmodelica-devel @1.13.0~dev-882-g45503fc_0+gfortran5+omnotebook+qt+sundials
> (active)
>
>
> I don’t recall the installation order, or if any of those are not the
> default variant.
>
> --Adam
>
>
>
> On Apr 16, 2018, at 3:39 PM, Murray Eisenberg <murrayeisenberg at gmail.com>
> wrote:
>
> From a post on the OpenModelica forum, I learned that the trouble was that
> I did not have the lapack port installed, and so the openmodelica-devel
> configure was attempting to use libatlas from atlas instead.
>
> Subsequently, after cleaning everything, I did install lapack
> @3.8.0_0+gfortran. However, the configure still fails. Undoubtedly this is
> due to the fact that the following both involve atlas:
>
>    octave @4.2.2_1+app+atlas+docs+fltk+gfortran+graphicsmagick+qt5+sound
>    SuiteSparse @4.2.1_4+atlas  [NB: octave depends on SuiteSparse]
>
> I wonder if the following ploy might work (this is the MacPorts part of
> the question):
>
>    (1) uninstalling the +atlas variants of SuiteSparse and octave;
>
>    (2) install openmodelica-devel (assuming that the presence of atlas and
> libatlas was the sole issue); then finally
>
>    (3) reinstalling the +atlas variants of octave and SuiteSparse.
>
> Note that openmodelica _seems_ to use SuiteSparse as well as lapack. And
> sundials has a library dependency on SuiteSparse.
>
> Further information:
>
> [me:~]$ sp dependent atlas
> SuiteSparse depends on atlas
> arpack depends on atlas
> octave depends on atlas
> qrupdate depends on atlas
>
> [me:~]$ sp deps octave
> Full Name: octave @4.2.2_1+accelerate+app+docs+
> fltk+gfortran+graphicsmagick+qt5+sound
> Build Dependencies:   gawk, icoutils, librsvg, grep, findutils, gsed,
> flex, bison, gperf, perl5, pkgconfig, gcc7, pkgconfig, librsvg, texinfo,
> texlive-basic, texlive-latex, texlive-fonts-recommended
> Library Dependencies: python27, ghostscript, gnuplot, less, ncurses,
> readline, pcre, SuiteSparse, qhull, zlib, hdf5, fftw-3, fftw-3-single,
> glpk, curl, qrupdate, arpack, fontconfig, freetype, gl2ps,
>                      vecLibFort, libgcc, qscintilla-qt5, fltk,
> libsndfile, portaudio, GraphicsMagick, qt5-qtbase, qt5-qttools
> Runtime Dependencies: epstool, ghostscript, fig2dev, pstoedit
>
> [me:~]$ sp deps openmodelica-devel
> Full Name: openmodelica-devel @1.13.0~dev-895-g0365526_0+
> gfortran5+omnotebook+qt+sundials
> Build Dependencies:   gtime, gsed, cmake, pkgconfig, autoconf, automake,
> libtool
> Library Dependencies: lp_solve, gettext, omniorb, readline, qjson, libgcc,
> gcc5, sundials, qt4-mac, qwt52
> Runtime Dependencies: omlib-modelica-3.2.1
>
> On 7 Apr2018, at 4:34 PM, Ken Cunningham <ken.cunningham.webuse at gmail.com>
> wrote:
>
>
>
> On Apr 7, 2018, at 1:13 PM, Murray Eisenberg <murrayeisenberg at gmail.com>
> wrote:
>
>
> With a small change in the openmodelica-devel Portfile that I did prior to
> starting the build (so it would use gcc7 for fortran), all of
> openmodelica-devel built through to completion for me on a current Xcode
> and 10.13 system, using no compiler variants, and only +libraries.
>
> set gfortran_versions {4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 6 7}
> set default_fortran_variant +gfortran7
>
>
> Ken
>
>
> ---
> Murray Eisenberg murrayeisenberg at gmail.com
> 503 King Farm Blvd #101
> <https://maps.google.com/?q=503+King+Farm+Blvd+%23101&entry=gmail&source=g> Home
> (240)-246-7240
> Rockville, MD 20850-6667 Mobile (413)-427-5334
>
>
>
>
> ---
> Murray Eisenberg murrayeisenberg at gmail.com
> 503 King Farm Blvd #101
> <https://maps.google.com/?q=503+King+Farm+Blvd+%23101&entry=gmail&source=g> Home
> (240)-246-7240
> Rockville, MD 20850-6667 Mobile (413)-427-5334
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macports.org/pipermail/macports-users/attachments/20180416/cce87b08/attachment.html>