OpenModelica?

Adam Dershowitz dersh at alum.mit.edu
Mon Apr 16 21:17:35 UTC 2018


It looks like the default variant of qrupdate is +accelerate +gcc7 already.  So, you can try, simply:
sudo port install qrupdate



--Adam



> On Apr 16, 2018, at 4:50 PM, Murray Eisenberg <murrayeisenberg at gmail.com> wrote:
> 
> After uninstalling the +atlas variant of octave and its direct or indirect deps or dependent’s sundials, SuiteSparse. qrupdate, and arpack, I began reinstalling with the +accelerate variant.
> 
> I used (with sudo):
> 
>   port install octave +app+accelerate+docs+fltk+gfortran+graphicsmagick+qt5+sound 
> 
> but when the octave installation was running it tried to install qrupdate and hit error:
> 
>   Error: Failed to fetch qrupdate: must set at least one Fortran variant (e.g. +gfortran, +gccX, +g95)
> 
> So I quit that, cleaned everything, and directly tried...
> 
>   port install qrupdate +accelerate +gfortran
> 
> … and got same error message that I must set a Fortran variant.
> 
> Now I’m puzzled: the qrupdate port says +gfortran is such a variant, then fails to accept it.  And in fact:
> 
> port info qrupdate
> qrupdate @1.1.2_5 (math)
> Variants:             [+]accelerate, atlas, g95, gcc44, gcc45, gcc46, gcc47,
>                       gcc48, gcc49, gcc5, gcc6, [+]gcc7, openblas, universal
> 
> (I see what Ken Cunningham said in separate message about blowing up MacPorts and starting over, but I have quite a number of config files, e.g., for apache, mysql, php, phpmyadmin, that I’d hate to set up again; that could take days. Unless I misunderstand what Ken said.)
> 
>> On 16 Apr2018, at 3:55 PM, Adam Dershowitz <dersh at alum.mit.edu <mailto:dersh at alum.mit.edu>> wrote:
>> 
>> As an datapoint, but not completely answering your question.  I have the following installed and all working:
>> 
>> sundials @3.1.0_1+accelerate+fortran_klu+gfortran+mpich (active)
>> octave @4.2.2_1+accelerate+app+docs+fltk+gfortran+graphicsmagick+qt4+sound (active)
>> SuiteSparse @4.2.1_4+accelerate (active)
>> openmodelica-devel @1.13.0~dev-882-g45503fc_0+gfortran5+omnotebook+qt+sundials (active)
>> 
>> 
>> I don’t recall the installation order, or if any of those are not the default variant.  
>> 
>> --Adam
>> 
>> 
>> 
>>> On Apr 16, 2018, at 3:39 PM, Murray Eisenberg <murrayeisenberg at gmail.com <mailto:murrayeisenberg at gmail.com>> wrote:
>>> 
>>> From a post on the OpenModelica forum, I learned that the trouble was that I did not have the lapack port installed, and so the openmodelica-devel configure was attempting to use libatlas from atlas instead.
>>> 
>>> Subsequently, after cleaning everything, I did install lapack @3.8.0_0+gfortran. However, the configure still fails. Undoubtedly this is due to the fact that the following both involve atlas:
>>> 
>>>    octave @4.2.2_1+app+atlas+docs+fltk+gfortran+graphicsmagick+qt5+sound 
>>>    SuiteSparse @4.2.1_4+atlas  [NB: octave depends on SuiteSparse]
>>> 
>>> I wonder if the following ploy might work (this is the MacPorts part of the question):
>>> 
>>>    (1) uninstalling the +atlas variants of SuiteSparse and octave;
>>> 
>>>    (2) install openmodelica-devel (assuming that the presence of atlas and libatlas was the sole issue); then finally
>>> 
>>>    (3) reinstalling the +atlas variants of octave and SuiteSparse.
>>> 
>>> Note that openmodelica _seems_ to use SuiteSparse as well as lapack. And sundials has a library dependency on SuiteSparse.
>>> 
>>> Further information:
>>> 
>>> [me:~]$ sp dependent atlas
>>> SuiteSparse depends on atlas
>>> arpack depends on atlas
>>> octave depends on atlas
>>> qrupdate depends on atlas
>>> 
>>> [me:~]$ sp deps octave
>>> Full Name: octave @4.2.2_1+accelerate+app+docs+fltk+gfortran+graphicsmagick+qt5+sound
>>> Build Dependencies:   gawk, icoutils, librsvg, grep, findutils, gsed, flex, bison, gperf, perl5, pkgconfig, gcc7, pkgconfig, librsvg, texinfo, texlive-basic, texlive-latex, texlive-fonts-recommended
>>> Library Dependencies: python27, ghostscript, gnuplot, less, ncurses, readline, pcre, SuiteSparse, qhull, zlib, hdf5, fftw-3, fftw-3-single, glpk, curl, qrupdate, arpack, fontconfig, freetype, gl2ps,
>>>                      vecLibFort, libgcc, qscintilla-qt5, fltk, libsndfile, portaudio, GraphicsMagick, qt5-qtbase, qt5-qttools
>>> Runtime Dependencies: epstool, ghostscript, fig2dev, pstoedit
>>> 
>>> [me:~]$ sp deps openmodelica-devel 
>>> Full Name: openmodelica-devel @1.13.0~dev-895-g0365526_0+gfortran5+omnotebook+qt+sundials
>>> Build Dependencies:   gtime, gsed, cmake, pkgconfig, autoconf, automake, libtool
>>> Library Dependencies: lp_solve, gettext, omniorb, readline, qjson, libgcc, gcc5, sundials, qt4-mac, qwt52
>>> Runtime Dependencies: omlib-modelica-3.2.1
>>> 
>>>> On 7 Apr2018, at 4:34 PM, Ken Cunningham <ken.cunningham.webuse at gmail.com <mailto:ken.cunningham.webuse at gmail.com>> wrote:
>>>> 
>>>> 
>>>> 
>>>>> On Apr 7, 2018, at 1:13 PM, Murray Eisenberg <murrayeisenberg at gmail.com <mailto:murrayeisenberg at gmail.com>> wrote:
>>>> 
>>>> With a small change in the openmodelica-devel Portfile that I did prior to starting the build (so it would use gcc7 for fortran), all of openmodelica-devel built through to completion for me on a current Xcode and 10.13 system, using no compiler variants, and only +libraries.
>>>> 
>>>> set gfortran_versions {4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 6 7}
>>>> set default_fortran_variant +gfortran7
>>>> 
>>>> 
>>>> Ken
>>> 
>>> ---
>>> Murray Eisenberg			murrayeisenberg at gmail.com <mailto:murrayeisenberg at gmail.com>
>>> 503 King Farm Blvd #101	Home (240)-246-7240
>>> Rockville, MD 20850-6667	Mobile (413)-427-5334
>>> 
>>> 
>> 
> 
> ---
> Murray Eisenberg			murrayeisenberg at gmail.com <mailto:murrayeisenberg at gmail.com>
> 503 King Farm Blvd #101	Home (240)-246-7240
> Rockville, MD 20850-6667	Mobile (413)-427-5334
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macports.org/pipermail/macports-users/attachments/20180416/1e2426c6/attachment.html>


More information about the macports-users mailing list