status of gcc42: Fixed!

[Ed Zaron]

Upgraded to the latest XCode tools from the Apple Developer Downloads  
(changed build number of gcc), and then gcc42 built just fine.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Edward D. Zaron
Research Associate
Hydrodynamic Process and Ecosystems Research Group
Department of Civil and Environmental Engineering
Portland State University
Portland, OR 97207-0751
Phone: (503)-725-2435
FAX: (503)-725-5950
zaron at cecs.pdx.edu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


On Feb 20, 2007, at 1:02 PM, Ed Zaron wrote:

>
> Hello All,
>
> I am running on a Intel Mac under 10.4.8 with Macports version  
> 1.320. Some time ago I successfully built and used gcc42. Today I  
> tried upgrading to the latest version and I received the following  
> error:
>
> /opt/local/var/db/dports/build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 
> dports_lang_gcc42/work/build/./gcc/xgcc -B/opt/local/var/db/dports/ 
> build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 
> dports_lang_gcc42/work/build/./gcc/ -B/opt/local/i386-apple- 
> darwin8.8.1/bin/ -B/opt/local/i386-apple-darwin8.8.1/lib/ -isystem / 
> opt/local/i386-apple-darwin8.8.1/include -isystem /opt/local/i386- 
> apple-darwin8.8.1/sys-include -O2 -g -O2  -DIN_GCC    -W -Wall - 
> Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style- 
> definition  -isystem ./include  -I. -Ix86_64 -I../../ 
> gcc-4.2-20070124/gcc -I../../gcc-4.2-20070124/gcc/x86_64 -I../../ 
> gcc-4.2-20070124/gcc/../include -I../../gcc-4.2-20070124/gcc/../ 
> libcpp/include -I/opt/local/include -I/opt/local/include -I../../ 
> gcc-4.2-20070124/gcc/../libdecnumber -I../libdecnumber -m64 \
>   -fno-tree-dominator-opts  \
>   -c ../../gcc-4.2-20070124/gcc/config/darwin-crt3.c -o x86_64/crt3.o
> /opt/local/var/db/dports/build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 
> dports_lang_gcc42/work/build/./gcc/xgcc -B/opt/local/var/db/dports/ 
> build/ 
> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ 
> dports_lang_gcc42/work/build/./gcc/ -B/opt/local/i386-apple- 
> darwin8.8.1/bin/ -B/opt/local/i386-apple-darwin8.8.1/lib/ -isystem / 
> opt/local/i386-apple-darwin8.8.1/include -isystem /opt/local/i386- 
> apple-darwin8.8.1/sys-include -O2  -O2 -g -O2  -DIN_GCC    -W -Wall  
> -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold- 
> style-definition  -isystem ./include  -fPIC -pipe -g - 
> DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  -I. -I. - 
> I../../gcc-4.2-20070124/gcc -I../../gcc-4.2-20070124/gcc/. -I../../ 
> gcc-4.2-20070124/gcc/../include -I../../gcc-4.2-20070124/gcc/../ 
> libcpp/include -I/opt/local/include -I/opt/local/include -I../../ 
> gcc-4.2-20070124/gcc/../libdecnumber -I../libdecnumber -m64 - 
> DL_muldi3 -fvisibility=hidden -DHIDE_EXPORTS -c ../../ 
> gcc-4.2-20070124/gcc/libgcc2.c -o libgcc/x86_64/_muldi3.o
> /opt/local/bin/odas: assembler (/opt/local/libexec/as/x86_64/as  
> or ) for architecture x86_64 not installed
> Installed assemblers are:
> /opt/local/libexec/as/ppc64/as for architecture ppc64
> /opt/local/libexec/as/ppc/as for architecture ppc
> /opt/local/libexec/as/i386/as for architecture i386
>
> Is there a special version of odcctools that contains the x86_64  
> assembler? I tried uninstalling and rebuilding odcctools and  
> received the same error.
>
> Is there a way to build just a 32 bit version of gcc42? by mistake  
> I did not write down the version number of my old gcc42 install  
> before I deactivated and uninstalled it. Is the old port file  
> somewhere in my port tree?
>
> -Ed
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Edward D. Zaron
> Research Associate
> Hydrodynamic Process and Ecosystems Research Group
> Department of Civil and Environmental Engineering
> Portland State University
> Portland, OR 97207-0751
> Phone: (503)-725-2435
> FAX: (503)-725-5950
> zaron at cecs.pdx.edu
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>