Processing of port gimp-help-en failed

[Jim Graham]

On Wed, Aug 01, 2012 at 01:31:37AM -0500, Ryan Schmidt wrote:

> MacPorts prints its location anytime an error occurs. Quoting from before:

Ahh, ok, I found it.

Here's what it says:

---------------------------  CUT HERE  ---------------------------
:debug:configure configure phase started at Wed Aug  1 01:18:11 CDT 2012
:notice:configure --->  Configuring gimp-help-en
:debug:configure Using compiler 'Mac OS X clang'
:debug:configure Executing org.macports.configure (gimp-help-en)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_gimp-help-en/gimp-help-en/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2' LDFLAGS='-L/opt/local/lib' FCFLAGS='-pipe -O2' OBJC='/usr/bin/clang' INSTALL='/usr/bin/install -c' ALL_LINGUAS='en' OBJCFLAGS='-pipe -O2' FFLAGS='-pipe -O2' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_gimp-help-en/gimp-help-en/work/gimp-help-2.8.0" && ./configure --prefix=/opt/local'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_gimp-help-en/gimp-help-en/work/gimp-help-2.8.0" && ./configure --prefix=/opt/local 
:info:configure checking build system type... x86_64-apple-darwin11.4.0
:info:configure checking for a BSD-compatible install... /usr/bin/install -c
:info:configure checking whether build environment is sane... yes
:info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
:info:configure checking for gawk... gawk
:info:configure checking whether make sets $(MAKE)... yes
:info:configure checking whether to enable maintainer-specific portions of Makefiles... no
:info:configure checking whether ln -s works... yes
:info:configure checking whether make sets $(MAKE)... (cached) yes
:info:configure checking for a sed that does not truncate output... /opt/local/bin/gsed
:info:configure checking whether make is GNU make... yes
:info:configure checking for xsltproc... /opt/local/bin/xsltproc
:info:configure checking for xmllint... /opt/local/bin/xmllint
:info:configure checking for dblatex... no
:info:configure configure: WARNING: cannot find dblatex(1), PDF generation disabled
:info:configure checking for docbook2odf... no
:info:configure configure: cannot find docbook2odf(1), ODF generation disabled
:info:configure checking for msgfmt... /opt/local/bin/msgfmt
:info:configure checking for msginit... /opt/local/bin/msginit
:info:configure checking for msgmerge... /opt/local/bin/msgmerge
:info:configure checking for msguniq... /opt/local/bin/msguniq
:info:configure checking for msgcat... /opt/local/bin/msgcat
:info:configure checking for dot... /opt/local/bin/dot
:info:configure checking for pngnq... no
:info:configure configure: WARNING: cannot find pngnq,
:info:configure images will not be optimized during distribution creation
:info:configure checking for pngcrush... /opt/local/bin/pngcrush
:info:configure checking for pkg-config... /opt/local/bin/pkg-config
:info:configure checking pkg-config is at least version 0.9.0... yes
:info:configure checking for GIMP... no
:info:configure configure: error: 
:info:configure ** Couldn't find a GIMP-2.0 installation. If you want to skip this check and
:info:configure ** install the help files to the configured prefix, use the --without-gimp
:info:configure ** configure option. Note that GIMP will then only find the help files if it
:info:configure ** is installed in the same prefix. See the file 'INSTALL' for more help.
:info:configure Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_gimp-help-en/gimp-help-en/work/gimp-help-2.8.0" && ./configure --prefix=/opt/local 
:info:configure Exit code: 1
:error:configure org.macports.configure for port gimp-help-en returned: configure failure: command execution failed
:debug:configure Error code: NONE
:debug:configure Backtrace: configure failure: command execution failed
    while executing
"$procedure $targetname"
:info:configure Warning: targets not executed for gimp-help-en: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
:error:configure Failed to install gimp-help-en
:debug:configure couldn't open "/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex": no such file or directory
    while executing
"open [file join $dir tclIndex]"
:notice:configure Please see the log file for port gimp-help-en for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_gimp-help-en/gimp-help-en/main.log
---------------------------  CUT HERE  ---------------------------

And with that, considering that I normally wake up (whether I want to or
not) at about 0400, and it's now just minutes away from 0200, I think it
might be time for me to get some sleep.  :-)

Thanks,
   --jim

-- 
THE SCORE:  ME:  2  CANCER:  0
73 DE N5IAL (/4)        MiSTie #49997  < Running Mac OS X Lion >
spooky130u at gmail.com ICBM/Hurricane: 30.44406N 86.59909W

        Do not look into waveguide with remaining eye.

Android Apps Listing at http://www.jstrack.org/barcodes.html