August 2019 Archives by date
Starting: Thu Aug 1 02:25:08 UTC 2019
Ending: Sat Aug 31 23:42:08 UTC 2019
Messages: 1006
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58469: pdftk @2.02_0+gcc5 calls abort() with symbol __darwin10_Unwind_FindEnclosingFunction not found on 10.14 (since gcc9 @9.1.0?); pdftk build also broken because gcj-mp-5 (from gcc5 @5.5.0_4) abort()s in the same way; likely all else built with gcj also affected
MacPorts
- [MacPorts] #58777: ImageMagick @6.9.9-40_6 build failure
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58770: gpsd @3.19: fails to build in trace mode
MacPorts
- [MacPorts] #57364: fftw @2.1.5: error: unknown argument: '-syslibroot'
MacPorts
- [MacPorts] #58780: gunits @2.18.1: uses random python
MacPorts
- [MacPorts] #58780: gunits @2.18.1: uses random python
MacPorts
- [MacPorts] #58781: gunits @2.18.1: requires module python_requests to match python used
MacPorts
- [MacPorts] #58782: gunits @2.18.1: installs files to non-standard `/opt/local/com` preventing function of `gunits_cur`
MacPorts
- [MacPorts] #58782: gunits @2.18.1: installs files to non-standard /opt/local/com preventing function of `gunits_cur` (was: gunits @2.18.1: installs files to non-standard `/opt/local/com` preventing function of `gunits_cur`)
MacPorts
- [MacPorts] #58783: gunits @2.18.1: update is available to 2.19.0
MacPorts
- [MacPorts] #58782: gunits @2.18.1: installs files to non-standard /opt/local/com preventing function of `gunits_cur`
MacPorts
- [MacPorts] #58784: opencv 3.4.3_1 < 3.4.7_0 Failed to build opencv: command execution failed
MacPorts
- [MacPorts] #58784: opencv 3.4.3_1 < 3.4.7_0 Failed to build opencv: command execution failed
MacPorts
- [MacPorts] #58784: opencv 3.4.3_1 < 3.4.7_0 Failed to build opencv: command execution failed
MacPorts
- [MacPorts] #58784: opencv 3.4.3_1 < 3.4.7_0 Failed to build opencv: command execution failed
MacPorts
- [MacPorts] #58784: opencv 3.4.3_1 < 3.4.7_0 Failed to build opencv: command execution failed
MacPorts
- [MacPorts] #58770: gpsd @3.19: fails to build in trace mode
MacPorts
- [MacPorts] #58770: gpsd @3.19: fails to build in trace mode
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph' (was: opencv 3.4.3_1 < 3.4.7_0 Failed to build opencv: command execution failed)
MacPorts
- [MacPorts] #58783: gunits @2.18.1: update is available to 2.19.0
MacPorts
- [MacPorts] #58777: ImageMagick @6.9.9-40_6 build failure
MacPorts
- [MacPorts] #58785: If port select fails, it can leave an incomplete or inconsistent set of symlinks
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58786: libgpod 0.8.3_1+python27: failed to build: "error renaming "/opt/local/.../libgpod/work/destroot/opt/local/lib/python2.7": no such file or directory"
MacPorts
- [MacPorts] #58786: libgpod 0.8.3_1+python27: failed to build: "error renaming "/opt/local/.../libgpod/work/destroot/opt/local/lib/python2.7": no such file or directory"
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58786: libgpod 0.8.3_1+python27: failed to build: "error renaming "/opt/local/.../libgpod/work/destroot/opt/local/lib/python2.7": no such file or directory"
MacPorts
- [MacPorts] #58205: qt4-mac: preparing for openssl 1.1 migration
MacPorts
- [MacPorts] #58786: libgpod 0.8.3_1+python27: failed to build: "error renaming "/opt/local/.../libgpod/work/destroot/opt/local/lib/python2.7": no such file or directory"
MacPorts
- [MacPorts] #58786: libgpod 0.8.3_1+python27: failed to build: "error renaming "/opt/local/.../libgpod/work/destroot/opt/local/lib/python2.7": no such file or directory"
MacPorts
- [MacPorts] #52101: openssl @1.0.2h_1: update to 1.1.1b
MacPorts
- [MacPorts] #58607: mysql{4, 5, 51, 55, 56}: prepare for OpenSSL 1.1 migration
MacPorts
- [MacPorts] #58607: mysql{4, 5, 51, 55}: prepare for OpenSSL 1.1 migration (was: mysql{4, 5, 51, 55, 56}: prepare for OpenSSL 1.1 migration)
MacPorts
- [MacPorts] #58630: postgresql*: prepare for OpenSSL 1.1 migration
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58205: qt4-mac: preparing for openssl 1.1 migration
MacPorts
- [MacPorts] #58756: Submitting commons-lang3 @3.9
MacPorts
- [MacPorts] #38183: ccache @3.1.9 "c++" uses the wrong compiler
MacPorts
- [MacPorts] #27665: ccache cannot write manifest files
MacPorts
- [MacPorts] #58781: gunits @2.18.1: requires module python_requests to match python used
MacPorts
- [MacPorts] #58481: ccache[-devel]: update to 3.7.2 (was: ccache-devel: update to 3.7.1)
MacPorts
- [MacPorts] #58782: gunits @2.18.1: installs files to non-standard /opt/local/com preventing function of `gunits_cur`
MacPorts
- [MacPorts] #58787: apache-ant-1.9 +source fails to install
MacPorts
- [MacPorts] #58787: apache-ant-1.9 +source fails to install
MacPorts
- [MacPorts] #58787: apache-ant-1.9 +source fails to install
MacPorts
- [MacPorts] #58788: poppler @0.69.0_0: build fail
MacPorts
- [MacPorts] #58788: poppler @0.69.0_0: build fail
MacPorts
- [MacPorts] #58788: poppler @0.79.0_0: build fail (was: poppler @0.69.0_0: build fail)
MacPorts
- [MacPorts] #58788: poppler @0.79.0_0: build fail
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58788: poppler @0.79.0_0: build fail
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58789: Failed to configure qt5-qtdeclarative-render2d and -doc
MacPorts
- [MacPorts] #58790: gauche: update to 0.9.8
MacPorts
- [MacPorts] #58791: gauche-dbd-pg: build fails
MacPorts
- [MacPorts] #58791: gauche-dbd-pg: build fails
MacPorts
- [MacPorts] #58791: gauche-dbd-pg: build fails
MacPorts
- [MacPorts] #58521: Cannot successfully start MySQL 5.6 after upgrading to 5.6.44
MacPorts
- [MacPorts] #58789: Failed to configure qt5-qtdeclarative-render2d and -doc
MacPorts
- [MacPorts] #58789: Failed to configure qt5-qtdeclarative-render2d and -doc
MacPorts
- [MacPorts] #58789: Failed to configure qt5-qtdeclarative-render2d and -doc
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #43431: Ports with a mysql4 or mysql5 variants and/or dependencies should switch to using mysql56 or possibly mariadb.
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58215: borgbackup @1.1.9_0: incompatible msgpack
MacPorts
- [MacPorts] #58688: https://distfiles.macports.org requires SNI, but OS X <= 10.8 do not seem to support that
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58719: folly @2019.06.17.00: Undefined symbols
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #43431: Ports with mysql4 or mysql5 variants and/or dependencies should switch to using mysql57+ or mariadb. (was: Ports with a mysql4 or mysql5 variants and/or dependencies should switch to using mysql56 or possibly mariadb.)
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #42408: pdftocairo (part of poppler) gives Bus Error: 10
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58741: get clang 3.4 and 3.9 4.0 5.0"back"
MacPorts
- [MacPorts] #58741: get clang 3.4 and 3.9 4.0 5.0"back"
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58649: [Port Abandoned] py-asn1-modules
MacPorts
- [MacPorts] #58461: [Port Abandoned] launch4j
MacPorts
- [MacPorts] #58669: [port abandoned] apache-solr3
MacPorts
- [MacPorts] #54764: cgdb @0.6.7_2: update to 0.7.0
MacPorts
- [MacPorts] #58401: [Port abandoned] cgdb
MacPorts
- [MacPorts] #40999: cgdb appears to invoke gdb rather than ggdb
MacPorts
- [MacPorts] #40999: cgdb appears to invoke gdb rather than ggdb
MacPorts
- [MacPorts] #54764: cgdb @0.6.7_2: update to 0.7.0
MacPorts
- [MacPorts] #58741: get clang 3.4 and 3.9 4.0 5.0"back"
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58775: rdesktop @1.8.6: checksum mismatch due to stealth update
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #34325: Port Request: rb19-cloudapp
MacPorts
- [MacPorts] #45823: [NEW]: rb21-fontcustom with dependent rb21 ports
MacPorts
- [MacPorts] #34325: Port Request: rb19-cloudapp
MacPorts
- [MacPorts] #34325: Port Request: rb19-cloudapp
MacPorts
- [MacPorts] #58775: rdesktop @1.8.6: checksum mismatch due to stealth update
MacPorts
- [MacPorts] #58728: Problem upgrading py27-zope-proxy
MacPorts
- [MacPorts] #58792: py37-mitmproxy @4.0.4_3: error running mitmproxy and mitmweb
MacPorts
- [MacPorts] #58792: py37-mitmproxy @4.0.4_3: error running mitmproxy and mitmweb
MacPorts
- [MacPorts] #58792: py37-mitmproxy @4.0.4_3: error running mitmproxy and mitmweb
MacPorts
- [MacPorts] #58793: poppler @0.79.0 build failure
MacPorts
- [MacPorts] #58793: poppler @0.79.0 build failure
MacPorts
- [MacPorts] #58793: poppler @0.79.0 build failure
MacPorts
- [MacPorts] #58793: poppler @0.79.0 build failure
MacPorts
- [MacPorts] #58793: poppler @0.79.0 build failure
MacPorts
- Re: [MacPorts] #58793: cctools breaks when it’s selected llvm variant is deactivated (was: poppler @0.79.0 build failure)
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58755: Submitting bcprov @1.62 (will be useful for pdftk-java)
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #49644: mariadb-10.0 won't build with LibreSSL
MacPorts
- [MacPorts] #58792: py37-mitmproxy @4.0.4_3: error running mitmproxy and mitmweb
MacPorts
- [MacPorts] #58674: commons-validator: update to 1.6
MacPorts
- Re: [MacPorts] #58793: cctools breaks when it’s selected llvm variant is deactivated
MacPorts
- [MacPorts] #58794: Povray fails to run: libc++abi.dylib: terminating with uncaught exception of type NSException
MacPorts
- Re: [MacPorts] #58793: cctools breaks when it’s selected llvm variant is deactivated
MacPorts
- [MacPorts] #58795: gr-rds: next version
MacPorts
- [MacPorts] #58795: gr-rds: next version
MacPorts
- [MacPorts] #58794: Povray terminates due to uncaught exception: 'NSWindow drag regions should only be invalidated on the Main Thread!' (was: Povray fails to run: libc++abi.dylib: terminating with uncaught exception of type NSException)
MacPorts
- Re: [MacPorts] #58793: cctools breaks when it’s selected llvm variant is deactivated
MacPorts
- [MacPorts] #58735: poppler @0.79.0 fails to build with cctools +llvm39 installed
MacPorts
- Re: [MacPorts] #58793: cctools breaks when it’s selected llvm variant is deactivated
MacPorts
- [MacPorts] #58795: gr-rds: next version
MacPorts
- [MacPorts] #58794: Povray terminates due to uncaught exception: 'NSWindow drag regions should only be invalidated on the Main Thread!'
MacPorts
- Re: [MacPorts] #58793: cctools breaks when it’s selected llvm variant is deactivated
MacPorts
- [MacPorts] #43431: Ports with mysql4 or mysql5 variants and/or dependencies should switch to using mysql57+ or mariadb.
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #23279: Review licenses for all my GPL/LGPL ports
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #58797: mame install problem on OSX Sierra
MacPorts
- [MacPorts] #58784: opencv @3.4.7_0: error: use of undeclared identifier '_mm256_cvtps_ph'
MacPorts
- [MacPorts] #58798: npm6 6.10.2_0 fails to build (as non root)
MacPorts
- [MacPorts] #58798: npm6 6.10.2_0 fails to build (as non root)
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra (was: mame install problem on OSX Sierra)
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #58735: poppler @0.79.0 fails to build with cctools +llvm39 installed
MacPorts
- [MacPorts] #43431: Ports with mysql4 or mysql5 variants and/or dependencies should switch to using mysql57+ or mariadb.
MacPorts
- [MacPorts] #18266: lighttpd-devel: gthread_aio/posix_aio: mmap() fails
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58799: Processing of port py-scikit-image failed
MacPorts
- [MacPorts] #58799: Processing of port py-scikit-image failed
MacPorts
- [MacPorts] #58799: Processing of port py-scikit-image failed
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict (was: Processing of port py-scikit-image failed)
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict
MacPorts
- [MacPorts] #43431: Ports with mysql4 or mysql5 variants and/or dependencies should switch to using mysql57+ or mariadb.
MacPorts
- [MacPorts] #53458: Jakarta Retired
MacPorts
- [MacPorts] #58350: libxml2 @2.9.9: Incorrect ICU include search paths, related to #57990
MacPorts
- [MacPorts] #43431: Ports with mysql4 or mysql5 variants and/or dependencies should switch to using mysql57+ or mariadb.
MacPorts
- [MacPorts] #53458: Jakarta Retired
MacPorts
- [MacPorts] #58197: mysql57 @5.7.25: port select fails: target "/opt/local/share/man/mysql57/man1/mysql-stress-test.pl.1.gz" doesn't exist
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58801: mysql57 at 5.7.27 does not build under OS X 10.11.6
MacPorts
- [MacPorts] #56050: Add GitHub usernames to maintainer option in all ports
MacPorts
- [MacPorts] #23279: Review licenses for all my GPL/LGPL ports
MacPorts
- [MacPorts] #58801: mysql57 at 5.7.27 does not build under OS X 10.11.6
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict
MacPorts
- [MacPorts] #58801: mysql57 at 5.7.27 does not build under OS X 10.11.6
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58197: mysql57 @5.7.25: port select fails: target "/opt/local/share/man/mysql57/man1/mysql-stress-test.pl.1.gz" doesn't exist
MacPorts
- [MacPorts] #58802: "Pallet "crashing on 10.14.6 right after start of application
MacPorts
- [MacPorts] #58802: "Pallet "crashing on 10.14.6 right after start of application
MacPorts
- [MacPorts] #58802: "Pallet "crashing on 10.14.6 right after start of application
MacPorts
- [MacPorts] #58801: mysql57 at 5.7.27 does not build under OS X 10.11.6
MacPorts
- [MacPorts] #58389: What to do with dependencies of EOL Servlet API ports?
MacPorts
- [MacPorts] #58801: mysql57 at 5.7.27 does not build under OS X 10.11.6
MacPorts
- [MacPorts] #58695: nodejs12 can't build
MacPorts
- [MacPorts] #58076: mongodb: portindex error
MacPorts
- [MacPorts] #58797: mame @0.203 runtime problem on OSX Sierra
MacPorts
- [MacPorts] #58598: PHP 7.3.6 can throw a known bus error on freebsd flavored OS if using ifuncs, can fix in configure.ac
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58076: mongodb: portindex error
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58803: (mpv, youtube-dl at 10.6.8) [ytdl_hook] youtube-dl failed: not found or not enough permissions
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict
MacPorts
- [MacPorts] #58805: (smtube at 10.4.11) Terminal type `unknown' is not defined.
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58492: [Port Abandoned] yersinia
MacPorts
- [MacPorts] #45796: yersinia: make: *** No rule to make target `all'. Stop.
MacPorts
- [MacPorts] #58491: yersinia @0.7.3: Build fails
MacPorts
- [MacPorts] #58806: sysdig 0.26.2: revbump request
MacPorts
- [MacPorts] #55565: thrift, p5-thrift, py-thrift: update to version 0.12.0
MacPorts
- [MacPorts] #58726: libvirt @5.5.0: error: expected '; ' before 'virTemporaryReturnPointer'
MacPorts
- [MacPorts] #58806: sysdig 0.26.2: revbump request
MacPorts
- [MacPorts] #58806: sysdig 0.26.2: revbump request
MacPorts
- [MacPorts] #58726: libvirt @5.5.0: error: expected '; ' before 'virTemporaryReturnPointer'
MacPorts
- [MacPorts] #58726: libvirt @5.5.0: error: expected '; ' before 'virTemporaryReturnPointer'
MacPorts
- [MacPorts] #58799: py-Pillow and py-pil conflict
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58805: (smtube at 10.4.11) Terminal type `unknown' is not defined.
MacPorts
- [MacPorts] #58806: sysdig: update to 0.26.2 (was: sysdig 0.26.2: revbump request)
MacPorts
- [MacPorts] #58076: mongodb: portindex error
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #51691: py27-pymvpa: unable to execute 'swig': No such file or directory
MacPorts
- [MacPorts] #58807: xdmf: Error: Failed to activate xdmf: Image error: /opt/local/include/ProjectVersion.hpp is being used by the active vtk port
MacPorts
- [MacPorts] #58808: libfmt: error: C++ requires a type specifier for all declarations
MacPorts
- [MacPorts] #58808: libfmt: error: C++ requires a type specifier for all declarations
MacPorts
- [MacPorts] #58809: boost @1.66.0_4 no_single+no_static+python27: Fetch/verification fails
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58582: xorg-libxcb @1.13.1 +python37 on Mac OS X 10.4.11, PPC Tiger, seems to use Python 2.7
MacPorts
- [MacPorts] #58727: xorg-xcb-proto @1.13_1: should default to variant python37
MacPorts
- [MacPorts] #58810: amarok @2.6.0_4: build fails - linking failed with lots of undefined symbols such as Collections::Collection::updated()
MacPorts
- [MacPorts] #58810: amarok @2.6.0_4: build fails - linking failed with lots of undefined symbols such as Collections::Collection::updated()
MacPorts
- [MacPorts] #58809: boost @1.66.0_4 no_single+no_static+python27: Fetch/verification fails
MacPorts
- [MacPorts] #36581: Patched portfile that allows amarok 2.4.3 to build and install
MacPorts
- [MacPorts] #58811: opencv @3.4.7+universal: no matching function for call to 'max'; no viable conversion from 'NSRect' to 'CGRect'
MacPorts
- [MacPorts] #58811: opencv @3.4.7+universal: no matching function for call to 'max'; no viable conversion from 'NSRect' to 'CGRect'
MacPorts
- [MacPorts] #58812: clamav @0.101.3 does not build on PPC Tiger, Mac OS X 10.4.11, because GCC 4.2 does not seem to understand "-Wno-logical-op-parentheses" and "-Wno-dangling-else"
MacPorts
- [MacPorts] #58812: clamav @0.101.3 does not build on PPC Tiger, Mac OS X 10.4.11, because GCC 4.2 does not seem to understand "-Wno-logical-op-parentheses" and "-Wno-dangling-else"
MacPorts
- [MacPorts] #58812: clamav @0.101.3 does not build on PPC Tiger, Mac OS X 10.4.11, because GCC 4.2 does not seem to understand "-Wno-logical-op-parentheses" and "-Wno-dangling-else"
MacPorts
- [MacPorts] #58812: clamav @0.101.3 does not build on PPC Tiger, Mac OS X 10.4.11, because GCC 4.2 does not seem to understand "-Wno-logical-op-parentheses" and "-Wno-dangling-else"
MacPorts
- [MacPorts] #58811: opencv @3.4.7+universal: no matching function for call to 'max'; no viable conversion from 'NSRect' to 'CGRect'
MacPorts
- [MacPorts] #58813: clang-8.0 missing library
MacPorts
- [MacPorts] #58814: Security release for PostgreSQL 9.4 and above
MacPorts
- [MacPorts] #58815: unbound @1.9.2: fails to build in trace mode
MacPorts
- [MacPorts] #58815: unbound @1.9.2: fails to build in trace mode
MacPorts
- [MacPorts] #58813: clang-8.0 installs libclang_rt.asan_osx_dynamic.dylib with incorrect install_name (was: clang-8.0 missing library)
MacPorts
- [MacPorts] #58813: clang-8.0 installs libclang_rt.asan_osx_dynamic.dylib with incorrect install_name
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58812: clamav @0.101.3 does not build on PPC Tiger, Mac OS X 10.4.11, because GCC 4.2 does not seem to understand "-Wno-logical-op-parentheses" and "-Wno-dangling-else"
MacPorts
- [MacPorts] #58812: clamav @0.101.3 does not build on PPC Tiger, Mac OS X 10.4.11, because GCC 4.2 does not seem to understand "-Wno-logical-op-parentheses" and "-Wno-dangling-else"
MacPorts
- [MacPorts] #53467: Obsoleted ports hosted on Google Code
MacPorts
- [MacPorts] #56050: Add GitHub usernames to maintainer option in all ports
MacPorts
- [MacPorts] #51386: Remove JRuby dependency on Kaffe
MacPorts
- [MacPorts] #58502: [port abandoned] jruby
MacPorts
- [MacPorts] #49862: Jruby build fails due to "Interface incompatibility in BiVariableMap on Java 8"
MacPorts
- [MacPorts] #58816: VLC @3.0.7.1_2+quartz: missing dependency on realpath
MacPorts
- [MacPorts] #58816: VLC @3.0.7.1_2+quartz: missing dependency on realpath
MacPorts
- [MacPorts] #58816: VLC @3.0.7.1_2+quartz: missing dependency on realpath
MacPorts
- [MacPorts] #58817: appbundler: fails to build on 10.14.6
MacPorts
- [MacPorts] #58817: appbundler: fails to build on 10.14.6
MacPorts
- [MacPorts] #58636: gnutls fails to build on Catalina Public Beta 1
MacPorts
- [MacPorts] #58815: unbound @1.9.2: fails to build in trace mode
MacPorts
- [MacPorts] #58818: qt5-qtconnectivity @5.12.4: failed to build on macOS 10.15 public beta (19A526h)
MacPorts
- [MacPorts] #58818: qt5-qtconnectivity @5.12.4: failed to build on macOS 10.15 public beta (19A526h)
MacPorts
- [MacPorts] #58768: Now that py27-webkitgtk is deprecated, how can I import webkit into python.
MacPorts
- [MacPorts] #58817: appbundler: fails to build on 10.14.6
MacPorts
- [MacPorts] #58818: qt5-qtconnectivity @5.12.4: failed to build on macOS 10.15 public beta (19A526h)
MacPorts
- [MacPorts] #58818: qt5-qtconnectivity @5.12.4: failed to build on macOS 10.15 public beta (19A526h)
MacPorts
- [MacPorts] #58819: (bison, 10.4.11) failed to build - command execution failed
MacPorts
- [MacPorts] #58819: (bison, 10.4.11) failed to build - command execution failed
MacPorts
- [MacPorts] #58819: bison @3.4.1 build failure on 10.4: flex: unknown flag '-' (was: (bison, 10.4.11) failed to build - command execution failed)
MacPorts
- [MacPorts] #55287: ntl @5.4.2: update to 10.5.0
MacPorts
- [MacPorts] #55287: ntl @5.4.2: update to 10.5.0
MacPorts
- [MacPorts] #58820: stellarium @0.19.1: error: missing default argument on parameter
MacPorts
- [MacPorts] #58820: stellarium @0.19.1: error: missing default argument on parameter
MacPorts
- [MacPorts] #58820: stellarium @0.19.1: error: missing default argument on parameter
MacPorts
- [MacPorts] #56954: py-numpy: numpy.polyfit broken with +gfortran variant on High Sierra
MacPorts
- [MacPorts] #57758: gnudatalanguage @0.9.7: fatal error: '/usr/include/fnmatch.h' file not found
MacPorts
- [MacPorts] #58713: ispc: Use newer llvm
MacPorts
- [MacPorts] #58637: ispc: update to 1.11.0
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58819: bison @3.4.1 build failure on 10.4: flex: unknown flag '-'
MacPorts
- [MacPorts] #58821: cmake, clang-8.0: circular dependency on older systems
MacPorts
- [MacPorts] #58817: appbundler: fails to build on 10.14.6
MacPorts
- [MacPorts] #58817: appbundler: fails to build on 10.14.6
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58823: ffmpeg 4.2_0+gpl2+gpl3+nonfree fails to build if libbluray is not installed
MacPorts
- [MacPorts] #58823: ffmpeg 4.2_0+gpl2+gpl3+nonfree fails to build if libbluray is not installed
MacPorts
- [MacPorts] #33696: ffmpeg: Cannot build with XCode 4.3.1 for 64 bit
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58823: ffmpeg 4.2_0+gpl2+gpl3+nonfree fails to build if libbluray is not installed
MacPorts
- [MacPorts] #58823: ffmpeg 4.2_0+gpl2+gpl3+nonfree fails to build if libbluray is not installed
MacPorts
- [MacPorts] #56627: Upstream mtr package has wrong version
MacPorts
- [MacPorts] #58779: base: ports cannot use SDK inside of Developer dir unless using Xcode build type
MacPorts
- [MacPorts] #58815: unbound @1.9.2: fails to build in trace mode
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58823: ffmpeg 4.2_0+gpl2+gpl3+nonfree fails to build if libbluray is not installed
MacPorts
- [MacPorts] #58485: libLASi: update to 1.1.3
MacPorts
- [MacPorts] #47932: Missing components for Plplot 5.10.0
MacPorts
- [MacPorts] #58821: cmake, clang-8.0: circular dependency on older systems
MacPorts
- [MacPorts] #58821: cmake, clang-8.0: circular dependency on older systems
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58800: Buildbot should wait until the clock catches up to the Portfiles
MacPorts
- [MacPorts] #58823: ffmpeg 4.2_0+gpl2+gpl3+nonfree fails to build if libbluray is not installed
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58815: unbound @1.9.2: fails to build in trace mode
MacPorts
- [MacPorts] #58389: What to do with dependencies of EOL Servlet API ports?
MacPorts
- [MacPorts] #58823: ffmpeg 4.2_0+gpl2+gpl3+nonfree fails to build if libbluray is not installed
MacPorts
- [MacPorts] #58815: unbound @1.9.2: fails to build in trace mode
MacPorts
- [MacPorts] #20292: unbound fails to build on 10.6
MacPorts
- [MacPorts] #58792: py37-mitmproxy @4.0.4_3: error running mitmproxy and mitmweb
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58821: cmake, clang-8.0: circular dependency on older systems
MacPorts
- [MacPorts] #58821: cmake, clang-8.0: circular dependency on older systems
MacPorts
- [MacPorts] #58821: cmake, clang-8.0: circular dependency on older systems
MacPorts
- [MacPorts] #58824: libLASi, graphviz: update from libLASi 1.1.1 to 1.1.3 adds hundreds of new dependencies
MacPorts
- [MacPorts] #58817: appbundler: fails to build on 10.14.6
MacPorts
- [MacPorts] #58825: PortIndex on mirrors has incorrect version for iTerm2
MacPorts
- [MacPorts] #58824: libLASi, graphviz: update from libLASi 1.1.1 to 1.1.3 adds hundreds of new dependencies
MacPorts
- [MacPorts] #58825: PortIndex on mirrors has incorrect version for iTerm2
MacPorts
- [MacPorts] #58825: PortIndex on mirrors has incorrect version for iTerm2
MacPorts
- [MacPorts] #58826: libLASi @1.1.3 circular dependency
MacPorts
- [MacPorts] #58826: libLASi @1.1.3 circular dependency
MacPorts
- [MacPorts] #58702: gmsh: update to 4.4.0
MacPorts
- [MacPorts] #58702: gmsh: update to 4.4.0
MacPorts
- [MacPorts] #58335: Update darktable to 2.6.2
MacPorts
- [MacPorts] #58825: PortIndex on mirrors has incorrect version for iTerm2
MacPorts
- [MacPorts] #58825: PortIndex on mirrors has incorrect version for iTerm2
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #56294: boost: update to 1.70.0
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58796: Problem installing py27-pymvpa
MacPorts
- [MacPorts] #51691: py27-pymvpa: unable to execute 'swig': No such file or directory
MacPorts
- [MacPorts] #51691: py27-pymvpa: unable to execute 'swig': No such file or directory
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58827: qgis @2.18.14+postgresql10 broken by install of wgrib2 @2.0.7_9+gfortran
MacPorts
- [MacPorts] #58827: qgis @2.18.14+postgresql10 broken by install of wgrib2 @2.0.7_9+gfortran
MacPorts
- [MacPorts] #58827: qgis @2.18.14+postgresql10 broken by install of wgrib2 @2.0.7_9+gfortran
MacPorts
- [MacPorts] #58335: Update darktable to 2.6.2
MacPorts
- [MacPorts] #58335: Update darktable to 2.6.2
MacPorts
- [MacPorts] #58826: libLASi @1.1.3 circular dependency
MacPorts
- [MacPorts] #58824: libLASi, graphviz: update from libLASi 1.1.1 to 1.1.3 adds hundreds of new dependencies
MacPorts
- [MacPorts] #58824: libLASi, graphviz: update from libLASi 1.1.1 to 1.1.3 adds hundreds of new dependencies
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58827: qgis @2.18.14+postgresql10 broken linking (was: qgis @2.18.14+postgresql10 broken by install of wgrib2 @2.0.7_9+gfortran)
MacPorts
- [MacPorts] #58828: (gnutls, 10.9.1) Failed to build gnutls: command execution failed
MacPorts
- [MacPorts] #58828: (gnutls, 10.9.1) Failed to build gnutls: command execution failed
MacPorts
- [MacPorts] #58828: (gnutls, 10.9.1) Failed to build gnutls: command execution failed
MacPorts
- [MacPorts] #58828: (gnutls, 10.9.1) Failed to build gnutls: command execution failed
MacPorts
- [MacPorts] #58829: mtr 9.3 is broken after the 9.3 update.
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58828: (gnutls, 10.9.1) Failed to build gnutls: command execution failed
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address (was: mtr 9.3 is broken after the 9.3 update.)
MacPorts
- [MacPorts] #58828: (gnutls, 10.9.1) Failed to build gnutls: command execution failed
MacPorts
- [MacPorts] #58481: ccache[-devel]: update to 3.7.2
MacPorts
- [MacPorts] #58830: freecad @0.17_3 fails to configure on mavericks
MacPorts
- [MacPorts] #58830: freecad @0.17_3 fails to configure on mavericks
MacPorts
- [MacPorts] #58830: freecad @0.17_3 fails to configure on mavericks
MacPorts
- [MacPorts] #58830: freecad @0.17_3 fails to configure on mavericks
MacPorts
- [MacPorts] #58818: qt5-qtconnectivity @5.12.4: failed to build on macOS 10.15 public beta (19A526h)
MacPorts
- [MacPorts] #58828: (gnutls, 10.9.1) Failed to build gnutls: command execution failed
MacPorts
- [MacPorts] #58818: qt5-qtconnectivity @5.12.4: failed to build on macOS 10.15 public beta (19A526h)
MacPorts
- [MacPorts] #58831: select.poll() not available in Python 3.x but present in Python 2.7
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58834: gimp nm issues on 10.5
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58835: gajim OpenSSL.rand.load_file(str(RNG_SEED)) AttributeError: 'module' object has no attribute 'load_file'
MacPorts
- [MacPorts] #58835: gajim 0.16.8_0 OpenSSL.rand.load_file(str(RNG_SEED)) AttributeError: 'module' object has no attribute 'load_file' (was: gajim OpenSSL.rand.load_file(str(RNG_SEED)) AttributeError: 'module' object has no attribute 'load_file')
MacPorts
- [MacPorts] #58835: gajim 0.16.8_0 OpenSSL.rand.load_file(str(RNG_SEED)) AttributeError: 'module' object has no attribute 'load_file'
MacPorts
- [MacPorts] #58831: select.poll() not available in Python 3.x but present in Python 2.7
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58834: gimp nm issues on 10.5
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58130: gtk3 @3.22.30: update to 3.24
MacPorts
- [MacPorts] #57903: ImageMagick @6.9.9-40_5: update to 6.9.10-40
MacPorts
- [MacPorts] #58130: gtk3 @3.22.30: update to 3.24
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58130: gtk3 @3.22.30: update to 3.24
MacPorts
- [MacPorts] #58835: gajim 0.16.8_0 OpenSSL.rand.load_file(str(RNG_SEED)) AttributeError: 'module' object has no attribute 'load_file'
MacPorts
- [MacPorts] #58831: select.poll() not available in Python 3.x but present in Python 2.7
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58834: gimp nm issues on 10.5
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #58031: harfbuzz @2.3.0 test errors
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58834: gimp nm issues on 10.5
MacPorts
- [MacPorts] #58031: harfbuzz @2.3.0 test errors
MacPorts
- [MacPorts] #58833: gnuradio 3.7.13.5 unable to build with macports on macbookpro
MacPorts
- [MacPorts] #57251: py36-numpy crash on Mojave (workaround on #56954)
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58827: qgis @2.18.14+postgresql10 broken linking
MacPorts
- [MacPorts] #57424: petsc: FCFLAGS and FFLAGS are both set, but with different values
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58831: select.poll() not available in Python 3.x but present in Python 2.7
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58831: select.poll() not available in Python 3.x but present in Python 2.7
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58839: p11-kit nm issues on leopard
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58804: (gnutls at 10.6.8) failed to build gnutls - command execution failed
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58817: appbundler: fails to build on 10.14.6
MacPorts
- [MacPorts] #58831: select.poll() not available in Python 3.x but present in Python 2.7
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58831: select.poll() not available in Python 3.x but present in Python 2.7
MacPorts
- [MacPorts] #58841: Update Qt5 ports to Qt 5.13
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58842: hdhomerun_gui fails to build.
MacPorts
- [MacPorts] #58842: hdhomerun_gui fails to build.
MacPorts
- [MacPorts] #58843: Update hdhomerun to current version.
MacPorts
- [MacPorts] #58843: Update hdhomerun to current version.
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58844: Unbound does not start after reboot, but it does start when started by hand with port reload unbound
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #58829: mtr @0.93: Error decoding localhost address
MacPorts
- [MacPorts] #56196: fluxbox @1.3.7_1 does not compile on macOS High Sierra, Version 10.13.4, because it clock_gettime() and uses a pointer instead an int
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58838: Unable to install UHD drivers on Macbook pro Mojave
MacPorts
- [MacPorts] #58608: mariadb{, -10.0, -10.1}: prepare for OpenSSL 1.1 migration
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58678: xorg-server @1.20.5_0: upgrade fails with "mkfontdir not registered as installed & active"
MacPorts
- [MacPorts] #58844: Unbound does not start after reboot, but it does start when started by hand with port reload unbound
MacPorts
- [MacPorts] #58844: Unbound does not start after reboot, but it does start when started by hand with port reload unbound
MacPorts
- [MacPorts] #58842: hdhomerun_gui fails to build.
MacPorts
- [MacPorts] #58843: Update hdhomerun to current version.
MacPorts
- [MacPorts] #58814: Security release for PostgreSQL 9.4 and above
MacPorts
- [MacPorts] #56196: fluxbox @1.3.7_1 does not compile on macOS High Sierra, Version 10.13.4, because it clock_gettime() and uses a pointer instead an int
MacPorts
- [MacPorts] #56196: fluxbox @1.3.7_1 does not compile on macOS High Sierra, Version 10.13.4, because it clock_gettime() and uses a pointer instead an int
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58842: hdhomerun_gui fails to build.
MacPorts
- [MacPorts] #58845: Python support for OpenCV4
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58843: Update hdhomerun to current version.
MacPorts
- [MacPorts] #58845: Python support for OpenCV4
MacPorts
- [MacPorts] #58814: Security release for PostgreSQL 9.4 and above
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58840: libuv fails to build on 10.8.5
MacPorts
- [MacPorts] #58031: harfbuzz @2.3.0 build and test errors on some legacy systems (was: harfbuzz @2.3.0 test errors)
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58844: Unbound does not start after reboot, but it does start when started by hand with port reload unbound
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58849: asymptote @2.52_0: fails to build on 10.6.8
MacPorts
- [MacPorts] #58849: asymptote @2.52_0: fails to build on 10.6.8
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58844: Unbound does not start after reboot, but it does start when started by hand with port reload unbound
MacPorts
- [MacPorts] #58822: Update for port nsd
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58847: Error: Failed to checksum legacy-support: macports-legacy-support-0.11.1.tar.gz does not exist in /opt/local/var/macports/distfiles/legacy-support
MacPorts
- [MacPorts] #58747: Error: clang-4.0 has been replaced by clang-8.0; please install that instead.
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58816: VLC @3.0.7.1_2+quartz: missing dependency on realpath
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #126: dependencies need to allow inclusion of variant
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58469: pdftk @2.02_0+gcc5 calls abort() with symbol __darwin10_Unwind_FindEnclosingFunction not found on 10.14 (since gcc9 @9.1.0?); pdftk build also broken because gcj-mp-5 (from gcc5 @5.5.0_4) abort()s in the same way; likely all else built with gcj also affected
MacPorts
- [MacPorts] #58848: Error: Failed to build rust: command execution failed
MacPorts
- [MacPorts] #58832: OpenBLAS @0.3.7: ../kernel/x86/amax.S:64:2: error: ../kernel/x86/amax.S:instruction requires: Not 64-bit mode
MacPorts
- [MacPorts] #58850: VLC @3.0.7 fails due to "write error" -- fixed by disabling parallel building
MacPorts
- [MacPorts] #58850: VLC @3.0.7 fails due to "write error" -- fixed by disabling parallel building
MacPorts
- [MacPorts] #58726: libvirt @5.5.0: error: expected '; ' before 'virTemporaryReturnPointer'
MacPorts
- [MacPorts] #58850: VLC @3.0.7 fails due to "write error" -- fixed by disabling parallel building
MacPorts
- [MacPorts] #58851: Headings are unreadable on news page
MacPorts
- [MacPorts] #36325: Add link to relevant bugs to the ports pages
MacPorts
- [MacPorts] #58852: unison @2.51.2_2: problem with ocaml @4.08.1 - build failure
MacPorts
- [MacPorts] #58852: unison @2.51.2_2: problem with ocaml @4.08.1 - build failure
MacPorts
- [MacPorts] #58635: scalapack @2.02+gcc9+openmpi+openblas: Fails to build
MacPorts
- [MacPorts] #58853: gimp2 @2.10.12 fails to open eps files with Segmentation fault: 11
MacPorts
- [MacPorts] #54908: ghc @7.8.3_6: fails to build in trace mode on 10.11
MacPorts
- [MacPorts] #52550: ghc-bootstrap: bump to 7.6.3
MacPorts
- [MacPorts] #48899: ghc & haskell-platform update?
MacPorts
- [MacPorts] #48899: ghc & haskell-platform update?
MacPorts
- [MacPorts] #52551: ghc: bump llvm dep
MacPorts
- [MacPorts] #51766: ghc build fails on OS X 10.6
MacPorts
- [MacPorts] #51766: ghc build fails on OS X 10.6
MacPorts
- [MacPorts] #42092: ghc-bootstrap does not build
MacPorts
- [MacPorts] #57236: Building ghc hang
MacPorts
- [MacPorts] #51766: ghc build fails on OS X 10.6
MacPorts
- [MacPorts] #58853: gimp2 @2.10.12 fails to open eps files with Segmentation fault: 11
MacPorts
- [MacPorts] #54908: ghc @7.8.3_6: fails to build in trace mode on 10.11
MacPorts
- [MacPorts] #58844: Unbound does not start after reboot, but it does start when started by hand with port reload unbound
MacPorts
- [MacPorts] #58841: Update Qt5 ports to Qt 5.13
MacPorts
- [MacPorts] #58854: cmake @3.15.2 fails to configure on 10.6/libc++
MacPorts
- [MacPorts] #58854: cmake @3.15.2 fails to configure on 10.6/libc++
MacPorts
- [MacPorts] #58854: cmake @3.15.2 fails to configure on 10.6/libc++
MacPorts
- [MacPorts] #58854: cmake @3.15.2 fails to configure on 10.6/libc++
MacPorts
- [MacPorts] #58841: Update Qt5 ports to Qt 5.13
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58854: cmake @3.15.2 fails to configure on 10.6/libc++
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58854: cmake @3.15.2 fails to configure on 10.6/libc++
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #58809: boost @1.66.0_4 no_single+no_static+python27: Fetch/verification fails
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58726: libvirt @5.5.0: error: expected '; ' before 'virTemporaryReturnPointer'
MacPorts
- [MacPorts] #58854: cmake @3.15.2 fails to configure on 10.6/libc++
MacPorts
- [MacPorts] #58726: libvirt @5.5.0: error: expected '; ' before 'virTemporaryReturnPointer'
MacPorts
- [MacPorts] #29654: add port for xapian/omega
MacPorts
- [MacPorts] #56956: julia @0.6.2_2: update to 1.0.0
MacPorts
- [MacPorts] #52424: Ports that depend on old llvm versions should be updated
MacPorts
- [MacPorts] #56233: Can't upgrade julia to 0.6.2
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #57452: julia @0.6.2_3: destroot stage of install fails "no more memory"
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58710: julia @0.6.2_3: llvm-4.0 has been replaced by llvm-8.0; please install that instead
MacPorts
- [MacPorts] #58851: Headings are unreadable on news page
MacPorts
- [MacPorts] #53995: nmap @7.40 fails to build with libc++
MacPorts
- [MacPorts] #58837: nmap compilation fails
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #57452: julia @0.6.2_3: destroot stage of install fails "no more memory"
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc) (was: mozjs52 @52.6.0 configure failure on PPC)
MacPorts
- [MacPorts] #58730: gnucash @3.5 +quartz fails to build
MacPorts
- [MacPorts] #58855: gnucash @3.5: Unknown CMake command "check_symbol_exists" (was: gnucash 3.5: config error -> build failure on Mohave)
MacPorts
- [MacPorts] #58309: NOP port upgrade outdated returns error status
MacPorts
- [MacPorts] #57003: port info order of fields is unexpected
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave (was: gnucash @3.5: Unknown CMake command "check_symbol_exists")
MacPorts
- [MacPorts] #57457: Travis CI: Sometimes declared dependencies aren't installed
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #57452: julia @0.6.2_3: destroot stage of install fails "no more memory"
MacPorts
- [MacPorts] #58836: opencv 3.4.7+contrib: Failed to fetch opencv
MacPorts
- [MacPorts] #56898: osxfuse @3.8.0: destroot fails: osxfuse.fs/Contents/Resources/load_osxfuse": no such file or directory
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58856: Boost: update to 1.71.0
MacPorts
- [MacPorts] #58856: Boost: update to 1.71.0
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58730: gnucash @3.5 +quartz fails to build
MacPorts
- [MacPorts] #46945: Olena Port fails build on Mac OS X Yosemite 10.10.2
MacPorts
- [MacPorts] #58730: gnucash @3.5 +quartz fails to build
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #58752: ocaml @4.07.1: update to 4.08.0
MacPorts
- [MacPorts] #58752: ocaml @4.07.1: update to 4.08.0
MacPorts
- [MacPorts] #58846: boost @ 1.70.0_0+no_single+no_static+python27+universal fails to build
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #54340: abinit @8.0.8b: update to 8.6.1
MacPorts
- [MacPorts] #50963: xymon-server 4.3.27 update
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #57452: julia @0.6.2_3: destroot stage of install fails "no more memory"
MacPorts
- [MacPorts] #58675: commons-logging: update to 1.2
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #58857: gnucash @3.5.0: ModuleNotFoundError: No module named 'gi' dyld: Symbol not found: _sqlite3_intarray_bind
MacPorts
- [MacPorts] #58858: [base]: default_variants could check variant conflicts
MacPorts
- [MacPorts] #58859: LyX @2.3.2_0+python37+qt5: fails to build with boost 1.70.0
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #56436: julia fails to build on snowleopard, the linker fails "ld: library not found for -lssp"
MacPorts
- [MacPorts] #58860: dbeaver-community: Checksum failure
MacPorts
- [MacPorts] #58859: LyX @2.3.2_0+python37+qt5: fails to build with boost 1.70.0
MacPorts
- [MacPorts] #58860: dbeaver-community: Checksum failure
MacPorts
- [MacPorts] #58860: dbeaver-community: Checksum failure
MacPorts
- [MacPorts] #58190: maven3 @3.6.0: change dependency from Kaffe to OpenJDK
MacPorts
- [MacPorts] #58190: maven3 @3.6.0: change dependency from Kaffe to OpenJDK
MacPorts
- [MacPorts] #58452: bash-completion: port(1) ui_warn output is displayed during tab completion
MacPorts
- [MacPorts] #58855: gnucash 3.5: config error -> build failure on Mohave
MacPorts
- [MacPorts] #58861: [port abandoned] ports maintained by kickstyle.net:gk5885
MacPorts
- [MacPorts] #58615: texlive-bin-extra @50853_1+doc: texdoc cannot find texlive.tlpdb
MacPorts
- [MacPorts] #56041: Update compiler selection for 10.6-10.8 with libc++
MacPorts
- [MacPorts] #58862: git @2.23.0: make Python optional
MacPorts
- [MacPorts] #58860: dbeaver-community: Checksum failure
MacPorts
- [MacPorts] #58856: Boost: update to 1.71.0
MacPorts
- [MacPorts] #58862: git @2.23.0: make Python optional
MacPorts
- [MacPorts] #58863: maven1 remove myself as maintainer
MacPorts
- [MacPorts] #58863: maven1 remove myself as maintainer
MacPorts
- [MacPorts] #58864: typesafe-activator remove myself as maintainer
MacPorts
- [MacPorts] #58865: appengine-java-sdk remove myself as maintainer
MacPorts
- [MacPorts] #58865: appengine-java-sdk remove myself as maintainer
MacPorts
- [MacPorts] #58864: typesafe-activator remove myself as maintainer
MacPorts
- [MacPorts] #49539: git-flow: fatal: unable to access 'https://github.com/nvie/gitflow.git/': SSL certificate problem: Couldn't understand the server certificate format
MacPorts
- [MacPorts] #51392: play @1.2.7.2: upgrade to 1.3.4
MacPorts
- [MacPorts] #58863: maven1 remove myself as maintainer
MacPorts
- [MacPorts] #58865: appengine-java-sdk remove myself as maintainer
MacPorts
- [MacPorts] #58864: typesafe-activator remove myself as maintainer
MacPorts
- [MacPorts] #58592: go @1.12.5: Undefined symbols _fstatat64 _openat _unlinkat
MacPorts
- [MacPorts] #58592: go @1.12.5: Undefined symbols _fstatat64 _openat _unlinkat
MacPorts
- [MacPorts] #57834: pdal @1.6.0: error: no viable conversion from 'void' to 'Json::Value'
MacPorts
- [MacPorts] #58866: PDAL @1.8.99 links with jsoncpp
MacPorts
- [MacPorts] #58867: bazel*: rename variant to bash_completion
MacPorts
- [MacPorts] #46291: msp430-gdb @7..2a-20111205_0 Fails to build on Yosemite
MacPorts
- [MacPorts] #46291: msp430-gdb @7.2a-20111205_0 Fails to build on Yosemite and later (was: msp430-gdb @7..2a-20111205_0 Fails to build on Yosemite)
MacPorts
- [MacPorts] #58592: go @1.12.5: Undefined symbols _fstatat64 _openat _unlinkat
MacPorts
- [MacPorts] #58868: ispc @1.11.0: Undefined symbols llvm::Value::dump() const llvm::Module::dump() const
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58870: ispc @1.11.0: Unknown architecture i386
MacPorts
- [MacPorts] #58870: ispc @1.11.0: Unknown architecture i386
MacPorts
- [MacPorts] #58870: ispc @1.11.0: Unknown architecture i386
MacPorts
- [MacPorts] #58870: ispc @1.11.0: Unknown architecture i386
MacPorts
- [MacPorts] #58871: On a clean macports install, I receive "can't read "prefix": no such variable"
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58871: On a clean macports install, I receive "can't read "prefix": no such variable"
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58872: port index screwed???
MacPorts
- [MacPorts] #58872: port index screwed???
MacPorts
- [MacPorts] #58872: port index screwed???
MacPorts
- [MacPorts] #58871: On a clean macports install, I receive "can't read "prefix": no such variable"
MacPorts
- [MacPorts] #58863: maven1 remove myself as maintainer
MacPorts
- [MacPorts] #58864: typesafe-activator remove myself as maintainer
MacPorts
- [MacPorts] #58865: appengine-java-sdk remove myself as maintainer
MacPorts
- [MacPorts] #58867: bazel*: rename variant to bash_completion
MacPorts
- [MacPorts] #58867: bazel*: rename variant to bash_completion
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58867: bazel*: rename variant to bash_completion
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58872: port index screwed???
MacPorts
- [MacPorts] #58872: port index screwed???
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58874: bazel: +bash variant doesn't build
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58874: bazel: +bash variant doesn't build
MacPorts
- [MacPorts] #58867: bazel*: rename variant to bash_completion
MacPorts
- [MacPorts] #58875: mysqlsh for mysql8: Request for new port
MacPorts
- [MacPorts] #57937: gcc9 @9-20181007_1: Compiler fails for trivial program indicating that _stdio.h is missing (also fails for gcc7 and gcc8).
MacPorts
- [MacPorts] #58867: bazel*: rename variant to bash_completion
MacPorts
- [MacPorts] #58389: What to do with dependencies of EOL Servlet API ports?
MacPorts
- [MacPorts] #58867: bazel*: rename variant to bash_completion
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58875: mysqlsh for mysql8: Request for new port
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc)
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc)
MacPorts
- [MacPorts] #58871: On a clean macports install, I receive "can't read "prefix": no such variable"
MacPorts
- [MacPorts] #58871: On a clean macports install, I receive "can't read "prefix": no such variable"
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58389: What to do with dependencies of EOL Servlet API ports?
MacPorts
- [MacPorts] #41876: maven-ant-tasks: Error: JAVA_HOME is not defined correctly.
MacPorts
- [MacPorts] #50181: install maven-ant-tasks fails
MacPorts
- [MacPorts] #57234: Some ports are failing to build due to new build system in Xcode 10
MacPorts
- [MacPorts] #58859: LyX @2.3.2_0+python37+qt5: fails to build with boost 1.70.0
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58555: mysql8 @8.0.16 build failure: No rule to make target `/opt/local/lib/libsasl2.dylib'
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58877: Codesigning instructions are out of date/incorrect
MacPorts
- [MacPorts] #58877: Codesigning instructions are out of date/incorrect
MacPorts
- [MacPorts] #49876: giflib: update to 5.1.4
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58876: ncurses-bootstrap fails to build as dependency on system with working libcxx environment
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #58873: opencv 3.4.7 broken?
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc)
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc)
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc)
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc)
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58870: ispc @1.11.0: Unknown architecture i386
MacPorts
- [MacPorts] #58868: ispc @1.11.0: Undefined symbols llvm::Value::dump() const llvm::Module::dump() const
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58878: netpbm @10.87.01_0: Destroot failed, backslash in group name
MacPorts
- [MacPorts] #58878: netpbm @10.87.01_0: Destroot failed, backslash in group name
MacPorts
- [MacPorts] #58878: netpbm @10.87.01_0: Destroot failed, backslash in group name
MacPorts
- [MacPorts] #45198: kaffe update to 1.1.9 fails, need libtool 1.5?
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58270: netcdf @4.7.0 +dap +mpich +netcdf4 +universal: nc-config differs and cannot be merged
MacPorts
- [MacPorts] #58834: gimp nm issues on 10.5
MacPorts
- [MacPorts] #58555: mysql8 @8.0.16 build failure: No rule to make target `/opt/local/lib/libsasl2.dylib'
MacPorts
- [MacPorts] #58869: ispc @1.11.0: fatal error: 'type_traits' file not found
MacPorts
- [MacPorts] #58868: ispc @1.11.0: Undefined symbols llvm::Value::dump() const llvm::Module::dump() const
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #58677: legacy support issue while building cmake (Leopard)
MacPorts
- [MacPorts] #57032: mozjs52 @52.6.0, mozjs60 @60.1.0: Target C compiler target CPU (unknown) does not match --target CPU (powerpc)
MacPorts
- [MacPorts] #58879: py37-packaging depends on py37-attrs
MacPorts
- [MacPorts] #58879: py37-packaging depends on py37-attrs
MacPorts
- [MacPorts] #58879: py37-packaging depends on py37-attrs
MacPorts
- [MacPorts] #53963: jython @2.7.0: Unsupported major.minor version 51.0
MacPorts
- [MacPorts] #53963: jython @2.7.0: Unsupported major.minor version 51.0
MacPorts
- [MacPorts] #58880: Tauthon 2.8
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58868: ispc @1.11.0: Undefined symbols llvm::Value::dump() const llvm::Module::dump() const
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58809: boost @1.66.0_4 no_single+no_static+python27: Fetch/verification fails
MacPorts
- [MacPorts] #58881: libgcc 9 dependency cctools requires libunwind-headers with which libgcc9 cannot be build
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58881: libgcc 9 dependency cctools requires libunwind-headers with which libgcc9 cannot be build
MacPorts
- [MacPorts] #58809: boost @1.66.0_4 no_single+no_static+python27: Fetch/verification fails
MacPorts
- [MacPorts] #58856: Boost: update to 1.71.0
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58881: libgcc 9 dependency cctools requires libunwind-headers with which libgcc9 cannot be build
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58883: dsniff does not build on Mojave
MacPorts
- [MacPorts] #58883: dsniff does not build on Mojave
MacPorts
- [MacPorts] #58883: dsniff does not build on Mojave
MacPorts
- [MacPorts] #58555: mysql8 @8.0.16 build failure: No rule to make target `/opt/local/lib/libsasl2.dylib'
MacPorts
- [MacPorts] #58740: nettle @3.5.1: error: invalid instruction mnemonic 'sha1rnds4'
MacPorts
- [MacPorts] #53467: Obsoleted ports hosted on Google Code
MacPorts
- [MacPorts] #53458: Jakarta Retired
MacPorts
- [MacPorts] #58389: What to do with dependencies of EOL Servlet API ports?
MacPorts
- [MacPorts] #53458: Jakarta Retired
MacPorts
- [MacPorts] #50409: hs-aeson-pretty, required for pandoc-citeproc
MacPorts
- [MacPorts] #50410: hs-conduit-extra, required for pandoc-citeproc
MacPorts
- [MacPorts] #50411: hs-rfc5051, required for pandoc-citeproc
MacPorts
- [MacPorts] #50413: hs-streaming-commons, required for pandoc-citeproc
MacPorts
- [MacPorts] #50414: hs-xml-conduit, required for pandoc-citeproc
MacPorts
- [MacPorts] #50415: hs-xml-types, required for pandoc-citeproc
MacPorts
- [MacPorts] #53678: build pandoc against hs-http-conduit to support https
MacPorts
- [MacPorts] #50416: pandoc-citeproc
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #48324: pandoc @1.12.4.2_1: update to latest version
MacPorts
- [MacPorts] #48971: pandoc fails to convert Markdown to PDF due to missing dependencies
MacPorts
- [MacPorts] #58884: qhull @2019.1_0 failure with Python/Matplotlib/Scipy
MacPorts
- [MacPorts] #48971: pandoc fails to convert Markdown to PDF due to missing dependencies
MacPorts
- [MacPorts] #58884: qhull @2019.1_0 failure with Python/Matplotlib/Scipy
MacPorts
- [MacPorts] #58884: qhull @2019.1_0 failure with Python/Matplotlib/Scipy
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- Re: [MacPorts] #57985: ruby26 @2.6.0: error: ‘for’ loop initial declaration used outside C99 mode
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58885: poppler 0.80.0 upgrade build error
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58886: Unable to upgrade poppler
MacPorts
- [MacPorts] #58886: Unable to upgrade poppler
MacPorts
- [MacPorts] #58121: shellcheck @0.3.8: update to 0.6.0
MacPorts
- [MacPorts] #51568: shellcheck @0.3.8: update to 0.5.0
MacPorts
- [MacPorts] #58887: libpcl update to 1.9.1_1 fails
MacPorts
- [MacPorts] #58887: libpcl update to 1.9.1_1 fails
MacPorts
- [MacPorts] #58888: poppler 0.80.0 fails
MacPorts
- [MacPorts] #58888: poppler 0.80.0 fails
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58886: Unable to upgrade poppler
MacPorts
- [MacPorts] #58888: poppler 0.80.0 fails
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58889: clang-8.0 ID load commands refer to non-existent files
MacPorts
- [MacPorts] #58887: libpcl update to 1.9.1_1 fails
MacPorts
- [MacPorts] #56558: Dovecot & Pigeonhole due for updates
MacPorts
- [MacPorts] #58889: clang-8.0 ID load commands refer to non-existent files
MacPorts
- [MacPorts] #56558: Dovecot & Pigeonhole due for updates
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58890: Dovecot2 can't build for i386 due to dependencies.
MacPorts
- [MacPorts] #58890: Dovecot2 can't build for i386 due to dependencies.
MacPorts
- [MacPorts] #58891: Error: No such port: xz-bootstrap
MacPorts
- [MacPorts] #58892: errorInfo: fondu does not have a subport 'libcxx'
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58892: errorInfo: fondu does not have a subport 'libcxx'
MacPorts
- [MacPorts] #58695: nodejs12 @12.6.0: ld: library not found for -latomic (was: nodejs12 can't build)
MacPorts
- [MacPorts] #58893: nodejs12 @12.9.1: error: use of undeclared identifier 'strnlen'
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58884: qhull @2019.1_0 failure with Python/Matplotlib/Scipy
MacPorts
- [MacPorts] #58889: clang-8.0 ID load commands refer to non-existent files
MacPorts
- [MacPorts] #58893: nodejs12 @12.9.1: error: use of undeclared identifier 'strnlen'
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #58894: emscripten @1.38.42: new port
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58893: nodejs12 @12.9.1: error: use of undeclared identifier 'strnlen'
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58574: poppler @0.77.0: dyld: Symbol not found: _poppler_additional_action_type_get_type
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58893: nodejs12 @12.9.1: error: use of undeclared identifier 'strnlen'
MacPorts
- [MacPorts] #58893: nodejs12 @12.9.1: error: use of undeclared identifier 'strnlen'
MacPorts
- [MacPorts] #58889: clang-8.0 ID load commands refer to non-existent files
MacPorts
- [MacPorts] #58891: Error: No such port: xz-bootstrap
MacPorts
- [MacPorts] #53299: clang sanitizer libraries have incorrect dylib id
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58891: Error: No such port: xz-bootstrap
MacPorts
- [MacPorts] #58892: errorInfo: fondu does not have a subport 'libcxx'
MacPorts
- [MacPorts] #58892: errorInfo: fondu does not have a subport 'libcxx'
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58757: Submitting pdftk-java @20190702
MacPorts
- [MacPorts] #58757: Submitting pdftk-java @20190702
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58896: dovecot2 and dovecot2-sieve need update for CVE fix
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58881: libgcc 9 dependency cctools requires libunwind-headers with which libgcc9 cannot be built (was: libgcc 9 dependency cctools requires libunwind-headers with which libgcc9 cannot be build)
MacPorts
- [MacPorts] #58883: @2.4: error: Berkeley DB with 1.85 compatibility not found does not build on Mojave (was: dsniff does not build on Mojave)
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58897: [New Port Request] opentoonz - An open-source full-featured 2D animation creation software
MacPorts
- [MacPorts] #58897: [New Port Request] opentoonz - An open-source full-featured 2D animation creation software
MacPorts
- [MacPorts] #48508: gobject-introspection: Switch to python 3
MacPorts
- [MacPorts] #58611: llvm-3.7: libcompiler_rt.a: No such file or directory
MacPorts
- [MacPorts] #58389: What to do with dependencies of EOL Servlet API ports?
MacPorts
- [MacPorts] #12015: BUG: XDoclet-1.2.3 installation omits xjavadoc jar
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #53634: clang++-mp-4.0 -stdlib=macports-libstdc++ should be in C++11 mode by default
MacPorts
- [MacPorts] #50080: clang-3.8+universal fails to build
MacPorts
- [MacPorts] #49001: Add support to provide a clang-based as wrapper
MacPorts
- [MacPorts] #47191: clang-3.7: c++14: missing support for binary operator delete
MacPorts
- [MacPorts] #58882: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #41466: port request: 'git-annex'
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58898: libcxx bootstrapping needs a method to upgrade to the +emulatedtls variant on 10.6 and less
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #58895: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58899: py-gdal issues after updating GDAL to 2.3.2_6
MacPorts
- [MacPorts] #58899: py-gdal issues after updating GDAL to 2.3.2_6
MacPorts
- [MacPorts] #58900: [New Port Request] vcvrack - Open-source virtual modular synthesizer
MacPorts
- [MacPorts] #58900: [New Port Request] vcvrack - Open-source virtual modular synthesizer
MacPorts
- [MacPorts] #46291: msp430-gdb @7.2a-20111205_0 Fails to build on Yosemite and later
MacPorts
- [MacPorts] #58901: RFE: Ship hardlink
MacPorts
- [MacPorts] #58882: Python37 configure script segfaults in generate-posix-vars on macOS 10.15 (was: Python37 configure script requires an update of MACOSX_DEPLOYMENT_TARGET rules for upcoming macOS 10.15)
MacPorts
- [MacPorts] #58899: py-gdal issues after updating GDAL to 2.3.2_6
MacPorts
- [MacPorts] #58901: util-linux: RFE: Ship hardlink (was: RFE: Ship hardlink)
MacPorts
- [MacPorts] #19995: Apache2 error: SSL/TLS libraries were missing or unusable
MacPorts
- [MacPorts] #56381: It would be nice if shell mode saved command history immediately
MacPorts
- [MacPorts] #57143: Unable to determine location of a macOS SDK
MacPorts
- [MacPorts] #57245: Confusing message when attempting to use +universal with the macOS 10.14 SDK
MacPorts
- [MacPorts] #58016: Unnecessary warning about Xcode and xcodebuild when installing port
MacPorts
- [MacPorts] #57718: Unexpected behavior when archive_site_local contains more than 1 URL
MacPorts
- [MacPorts] #58771: build failure py36-numpy
MacPorts
- [MacPorts] #58901: util-linux: RFE: Ship hardlink
MacPorts
- [MacPorts] #58756: Submitting commons-lang3 @3.9
MacPorts
- [MacPorts] #58757: Submitting pdftk-java @20190702
MacPorts
- [MacPorts] #58902: New port: python/yamllint
MacPorts
- [MacPorts] #58902: New port: python/yamllint
MacPorts
- [MacPorts] #58902: New port: python/yamllint
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect (was: OpenBLAS @0.3.7 +native build failure: ld: library not found for -lSystem)
MacPorts
- [MacPorts] #58902: New port: python/yamllint
MacPorts
- [MacPorts] #58903: openmodelica build fails at OMCompiler
MacPorts
- [MacPorts] #58903: openmodelica build fails at OMCompiler
MacPorts
- [MacPorts] #58903: openmodelica build fails at OMCompiler
MacPorts
- [MacPorts] #58903: openmodelica build fails at OMCompiler
MacPorts
- [MacPorts] #58903: openmodelica build fails at OMCompiler
MacPorts
- [MacPorts] #58903: openmodelica build fails at OMCompiler
MacPorts
- [MacPorts] #58904: tensorboard-3.7 fails to launch
MacPorts
- [MacPorts] #58904: tensorboard-3.7 fails to launch
MacPorts
- [MacPorts] #56563: Failed to activate: Cannot restore xattr:com.apple.decmpfs
MacPorts
- [MacPorts] #56563: Failed to activate: Cannot restore xattr:com.apple.decmpfs
MacPorts
- [MacPorts] #56563: Failed to activate: Cannot restore xattr:com.apple.decmpfs
MacPorts
- [MacPorts] #56563: Failed to activate: Cannot restore xattr:com.apple.decmpfs
MacPorts
- [MacPorts] #57152: clang: asan does not work
MacPorts
- [MacPorts] #58889: clang-8.0 ID load commands refer to non-existent files
MacPorts
- [MacPorts] #53299: clang sanitizer libraries have incorrect dylib id
MacPorts
- [MacPorts] #58905: pdftk-java @3.0.6 Class Not found exception
MacPorts
- [MacPorts] #58792: py37-mitmproxy @4.0.4_3: error running mitmproxy and mitmweb
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58895: gcc9: search path for standard libraries is incomplete/incorrect
MacPorts
- [MacPorts] #58906: epubcheck: update to 4.2.2
MacPorts
- [MacPorts] #52408: Update claws-mail to use webkit2-gtk
MacPorts
Last message date:
Sat Aug 31 23:42:08 UTC 2019
Archived on: Sat Aug 31 23:42:11 UTC 2019
This archive was generated by
Pipermail 0.09 (Mailman edition).