February 2018 Archives by author
Starting: Thu Feb 1 00:40:03 UTC 2018
Ending: Wed Feb 28 23:05:34 UTC 2018
Messages: 875
- [MacPorts] #55763: gpsd @3.17_1 fails to build on Mavericks
MacPorts
- [MacPorts] #55763: gpsd @3.17_1 fails to build on Mavericks
MacPorts
- [MacPorts] #55763: gpsd @3.17_1 fails to build on Mavericks
MacPorts
- [MacPorts] #55763: gpsd @3.17_1 fails to build on Mavericks
MacPorts
- [MacPorts] #55763: gpsd @3.17_1 fails to build on Mavericks
MacPorts
- [MacPorts] #55763: gpsd @3.17_1 fails to build on Mavericks
MacPorts
- [MacPorts] #55049: textmate2 @2.0-rc.4: build fails under highsierra (10.13) with error: no viable conversion from
MacPorts
- [MacPorts] #48024: charm-qt5 @1.8.0_20150312: cannot evaluate portfile
MacPorts
- [MacPorts] #55767: Please add gnurl to macports
MacPorts
- [MacPorts] #55493: inetutils @1.9.4: telnet exits with abort trap: 6
MacPorts
- [MacPorts] #55493: inetutils @1.9.4: telnet exits with abort trap: 6
MacPorts
- [MacPorts] #55770: checksum error for py27-dulwich
MacPorts
- [MacPorts] #55770: checksum error for py27-dulwich
MacPorts
- [MacPorts] #55766: pcb: Update to 4.1.0
MacPorts
- [MacPorts] #55766: pcb: Update to 4.1.0
MacPorts
- [MacPorts] #55766: pcb: Update to 4.1.0
MacPorts
- [MacPorts] #48024: charm-qt5 @1.8.0_20150312: cannot evaluate portfile
MacPorts
- [MacPorts] #55770: py27-dulwich @0.18.5: checksum error (was: checksum error for py27-dulwich)
MacPorts
- [MacPorts] #55770: py27-dulwich @0.18.5: checksum error
MacPorts
- [MacPorts] #37503: py-dulwich: universal variant is not universal
MacPorts
- [MacPorts] #55762: Homebank @5.1.7 updating a port to a newer upstream version
MacPorts
- [MacPorts] #55762: Homebank @5.1.7 updating a port to a newer upstream version
MacPorts
- [MacPorts] #48024: charm-qt5 @1.8.0_20150312: cannot evaluate portfile
MacPorts
- [MacPorts] #55771: textmate2 @2.0-rc.4: Build fails with SDK < 10.11
MacPorts
- [MacPorts] #55772: textmate2 @2.0-rc.4 links with openssl statically
MacPorts
- [MacPorts] #47197: cmake-based ports: add cmake.out_of_source yes/no
MacPorts
- [MacPorts] #48024: charm-qt5 @1.8.0_20150312: cannot evaluate portfile
MacPorts
- [MacPorts] #55773: textmate2 @2.0-rc.4 fails to build when sparsehash @2.0.3 was built with libstdc++
MacPorts
- [MacPorts] #55771: textmate2 @2.0-rc.4: Build fails with SDK < 10.11
MacPorts
- [MacPorts] #55493: inetutils @1.9.4: telnet exits with abort trap: 6
MacPorts
- [MacPorts] #48024: charm-qt5 @1.8.0_20150312: cannot evaluate portfile
MacPorts
- [MacPorts] #55774: Qt5.10 compilation failed
MacPorts
- [MacPorts] #55774: Qt5.10 compilation failed
MacPorts
- [MacPorts] #55774: Qt5.10 compilation failed
MacPorts
- [MacPorts] #48024: charm-qt5 @1.8.0_20150312: cannot evaluate portfile
MacPorts
- [MacPorts] #48024: charm-qt5 @1.8.0_20150312: cannot evaluate portfile
MacPorts
- [MacPorts] #37503: py-dulwich: universal variant is not universal
MacPorts
- [MacPorts] #55756: sixs 2.1: new port for 6SV2.1
MacPorts
- [MacPorts] #55756: sixs 2.1: new port for 6SV2.1
MacPorts
- [MacPorts] #51825: mitmproxy @0.17.1 -- New port
MacPorts
- [MacPorts] #55775: neovim @0.2.2: mouse broken with ncurses @6.1
MacPorts
- [MacPorts] #55775: neovim @0.2.2: mouse broken with ncurses @6.1
MacPorts
- [MacPorts] #55776: UnicodeDecodeError when Building GDL on macOS HighSierra
MacPorts
- [MacPorts] #55776: UnicodeDecodeError when Building GDL on macOS HighSierra
MacPorts
- [MacPorts] #55776: UnicodeDecodeError when Building GDL on macOS HighSierra
MacPorts
- [MacPorts] #55776: UnicodeDecodeError when Building GDL on macOS HighSierra
MacPorts
- [MacPorts] #55776: gdl @2.30.1: UnicodeDecodeError: 'ascii' codec can't decode byte 0xe1 in position 7: ordinal not in range(128) (was: UnicodeDecodeError when Building GDL on macOS HighSierra)
MacPorts
- [MacPorts] #55774: qt5-qtbase @5.10.0: error: 'LSCopyDefaultApplicationURLForURL' is only available on macOS 10.10 or newer (was: Qt5.10 compilation failed)
MacPorts
- [MacPorts] #55770: py27-dulwich @0.18.5: checksum error
MacPorts
- [MacPorts] #37503: py-dulwich: universal variant is not universal
MacPorts
- [MacPorts] #55575: port -vst install fails with "/usr/bin/tar: No such file or directory"
MacPorts
- [MacPorts] #55767: Please add gnurl to macports
MacPorts
- [MacPorts] #55777: gnuradio @3.7.11_6 configure failure : cannot find pygtk
MacPorts
- [MacPorts] #55777: gnuradio @3.7.11_6 configure failure : cannot find pygtk
MacPorts
- [MacPorts] #55777: gnuradio @3.7.11_6 configure failure : cannot find pygtk
MacPorts
- [MacPorts] #55777: gnuradio @3.7.11_6 configure failure : cannot find pygtk
MacPorts
- [MacPorts] #37503: py-dulwich: universal variant is not universal
MacPorts
- [MacPorts] #55410: gcc7 @7.2.0 does not build on Mac OS X 10.6.8, Snow Leopard, because of "Undefined symbols for architecture x86_64"
MacPorts
- [MacPorts] #55778: multimarkdown @6.2.3: breaking changes with previous version @4.5
MacPorts
- [MacPorts] #55778: multimarkdown @6.2.3: breaking changes with previous version @4.5
MacPorts
- [MacPorts] #55778: multimarkdown @6.2.3: breaking changes with previous version @4.5
MacPorts
- [MacPorts] #55410: gcc7 @7.2.0 does not build on Mac OS X 10.6.8, Snow Leopard, because of "Undefined symbols for architecture x86_64"
MacPorts
- [MacPorts] #55410: gcc7 @7.2.0 does not build on Mac OS X 10.6.8, Snow Leopard, because of "Undefined symbols for architecture x86_64"
MacPorts
- [MacPorts] #55771: textmate2 @2.0-rc.4: Build fails with SDK < 10.11
MacPorts
- [MacPorts] #55778: multimarkdown @6.2.3: breaking changes with previous version @4.5
MacPorts
- [MacPorts] #55771: textmate2 @2.0-rc.4: Build fails with SDK < 10.11
MacPorts
- [MacPorts] #55410: gcc7 @7.2.0 does not build on Mac OS X 10.6.8, Snow Leopard, because of "Undefined symbols for architecture x86_64"
MacPorts
- [MacPorts] #55774: qt5-qtbase @5.10.0: error: 'LSCopyDefaultApplicationURLForURL' is only available on macOS 10.10 or newer
MacPorts
- [MacPorts] #55779: yaml-cpp: 0.6.0 is out
MacPorts
- [MacPorts] #55777: gnuradio @3.7.11_6 configure failure : cannot find pygtk
MacPorts
- [MacPorts] #55780: ffmpeg @3.4.1_3 : Failed to configure ffmpeg: configure failure: command execution failed
MacPorts
- [MacPorts] #55780: ffmpeg @3.4.1_3 : Failed to configure ffmpeg: configure failure: command execution failed
MacPorts
- [MacPorts] #55675: qpdf @7.0.0: build fails if qpdf @6.0.0 is active
MacPorts
- [MacPorts] #54384: Erlang+wxwidgets doesn't need libGLU
MacPorts
- [MacPorts] #55778: multimarkdown @6.2.3: breaking changes with previous version @4.5
MacPorts
- [MacPorts] #54184: python36 - exit from console makes text invisible in bash
MacPorts
- [MacPorts] #55779: yaml-cpp: 0.6.0 is out
MacPorts
- [MacPorts] #55780: ffmpeg @3.4.1_3 : Failed to configure ffmpeg: configure failure: command execution failed
MacPorts
- [MacPorts] #55780: ffmpeg @3.4.1_3 : Failed to configure ffmpeg: configure failure: command execution failed
MacPorts
- [MacPorts] #55575: port -vst install fails with "/usr/bin/tar: No such file or directory"
MacPorts
- [MacPorts] #55575: port -vst install fails with "/usr/bin/tar: No such file or directory"
MacPorts
- [MacPorts] #53555: apache-ant @1.10.x: Ant 1.10 requires Java 8
MacPorts
- [MacPorts] #55781: kdevelop @4.7.4: "Failed to build kdevplatform: command execution failed"
MacPorts
- [MacPorts] #55781: kdevelop @4.7.4: "Failed to build kdevplatform: command execution failed"
MacPorts
- [MacPorts] #55780: ffmpeg @3.4.1_3: ERROR: libxvid not found (was: ffmpeg @3.4.1_3 : Failed to configure ffmpeg: configure failure: command execution failed)
MacPorts
- [MacPorts] #55781: kdevplatform @4.7.4: error: expected expression (was: kdevelop @4.7.4: "Failed to build kdevplatform: command execution failed")
MacPorts
- [MacPorts] #55782: rust @1.23.0 +universal: error: Option '--disable-dependency-tracking' is not recognized
MacPorts
- [MacPorts] #55783: librsvg @2.42.2 +universal: dependency cargo does not build universal
MacPorts
- [MacPorts] #55783: librsvg @2.42.2 +universal: dependency cargo does not build universal
MacPorts
- [MacPorts] #55784: rust @1.23.0: Symbol not found: _CCDigestGetOutputSizeFromRef
MacPorts
- [MacPorts] #55785: qpdf @7.1.0 fails to build on Mavericks
MacPorts
- [MacPorts] #55785: qpdf @7.1.0 fails to build on Mavericks
MacPorts
- [MacPorts] #55786: libopenraw: Use cxx11 1.1 portgroup
MacPorts
- [MacPorts] #55786: libopenraw: Use cxx11 1.1 portgroup
MacPorts
- [MacPorts] #55787: gegl @0.2.0: Fix libopenraw usage
MacPorts
- [MacPorts] #55787: gegl @0.2.0: Fix libopenraw usage
MacPorts
- [MacPorts] #55787: gegl @0.2.0: Fix libopenraw usage
MacPorts
- [MacPorts] #55771: textmate2 @2.0-rc.4: Build fails with SDK < 10.11
MacPorts
- [MacPorts] #55785: qpdf @7.1.0: error: no member named 'abs' in namespace 'std' (was: qpdf @7.1.0 fails to build on Mavericks)
MacPorts
- [MacPorts] #55785: qpdf @7.1.0: error: no member named 'abs' in namespace 'std'
MacPorts
- [MacPorts] #55777: gnuradio @3.7.11_6 configure failure : cannot find pygtk
MacPorts
- [MacPorts] #55783: librsvg @2.42.2 +universal: dependency cargo does not build universal
MacPorts
- [MacPorts] #55783: librsvg @2.42.2 +universal: dependency cargo does not build universal
MacPorts
- [MacPorts] #55772: textmate2 @2.0-rc.4 links with openssl statically
MacPorts
- [MacPorts] #55773: textmate2 @2.0-rc.4 fails to build when sparsehash @2.0.3 was built with libstdc++
MacPorts
- [MacPorts] #55575: port -vst install fails with "/usr/bin/tar: No such file or directory"
MacPorts
- [MacPorts] #55783: librsvg @2.42.2 +universal: dependency cargo does not build universal
MacPorts
- [MacPorts] #55772: textmate2 @2.0-rc.4 links with openssl statically
MacPorts
- [MacPorts] #55773: textmate2 @2.0-rc.4 fails to build when sparsehash @2.0.3 was built with libstdc++
MacPorts
- [MacPorts] #55788: Please update nauty
MacPorts
- [MacPorts] #55493: inetutils @1.9.4: telnet exits with abort trap: 6
MacPorts
- [MacPorts] #55789: py27-wxpython-3.0 @3.0.2.0: Checksum mismatch
MacPorts
- [MacPorts] #55789: py27-wxpython-3.0 @3.0.2.0: Checksum mismatch
MacPorts
- [MacPorts] #55777: gnuradio @3.7.11_6 configure failure : cannot find pygtk
MacPorts
- [MacPorts] #55790: omniORB support Python variants
MacPorts
- [MacPorts] #55790: omniORB support Python variants
MacPorts
- [MacPorts] #55791: py-omniORBpy @4.2.2 add support for python 3.x
MacPorts
- [MacPorts] #55791: py-omniORBpy @4.2.2 add support for python 3.x
MacPorts
- [MacPorts] #55790: omniORB support Python variants
MacPorts
- [MacPorts] #55792: TexLive Missing newtxtext and newtxmath
MacPorts
- [MacPorts] #55493: inetutils @1.9.4: telnet exits with abort trap: 6
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #55794: librsvg @2.42.2 - can't build on <10.7 due to dependecy on rust
MacPorts
- [MacPorts] #54653: ndcctools @6.0.16: update to 6.2.4 (was: ndcctools @6.0.16: update to 6.1.3)
MacPorts
- [MacPorts] #55493: inetutils @1.9.4: telnet exits with abort trap: 6
MacPorts
- [MacPorts] #55204: mawk @1.3.4-20171017: Fails with 'Abort trap: 6' when using binary (source okay)
MacPorts
- [MacPorts] #55792: TexLive Missing newtxtext and newtxmath
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #55790: omniORB support Python variants
MacPorts
- [MacPorts] #55790: omniORB support Python variants
MacPorts
- [MacPorts] #55791: py-omniORBpy @4.2.2 add support for python 3.x
MacPorts
- [MacPorts] #55791: py-omniORBpy @4.2.2 add support for python 3.x
MacPorts
- [MacPorts] #55790: omniORB support Python variants
MacPorts
- [MacPorts] #55762: Homebank @5.1.7 updating a port to a newer upstream version
MacPorts
- [MacPorts] #55795: [Port Abandoned] ports maintained by the-huck.com:patrick
MacPorts
- [MacPorts] #55756: sixs 2.1: new port for 6SV2.1
MacPorts
- [MacPorts] #55796: py27-goocanvas @0.14.1_6: Failed to destroot py27-goocanvas: command execution failed
MacPorts
- [MacPorts] #55796: py27-goocanvas @0.14.1_6: Failed to destroot py27-goocanvas: command execution failed
MacPorts
- [MacPorts] #55796: py27-goocanvas @0.14.1_6: Failed to destroot py27-goocanvas: command execution failed
MacPorts
- [MacPorts] #55797: swi-prolog-devel @7.7.8: update to 7.7.9
MacPorts
- [MacPorts] #55797: swi-prolog-devel @7.7.8: update to 7.7.9
MacPorts
- [MacPorts] #55783: librsvg @2.42.2 +universal: dependency cargo does not build universal
MacPorts
- [MacPorts] #55783: librsvg @2.42.2 +universal: dependency cargo does not build universal
MacPorts
- [MacPorts] #55794: librsvg @2.42.2 - can't build on <10.7 due to dependecy on rust
MacPorts
- [MacPorts] #55794: librsvg @2.42.2 - can't build on <10.7 due to dependecy on rust
MacPorts
- [MacPorts] #55797: swi-prolog-devel @7.7.8: update to 7.7.9
MacPorts
- [MacPorts] #55128: boost @1.59.0_3+no_single+no_static+python27 Error: Failed to deactivate boost: error deleting "/opt/local/include/boost/fusion/sequence/comparison/enable_comparison.hpp": permission denied
MacPorts
- [MacPorts] #55128: boost @1.59.0_3+no_single+no_static+python27 Error: Failed to deactivate boost: error deleting "/opt/local/include/boost/fusion/sequence/comparison/enable_comparison.hpp": permission denied
MacPorts
- [MacPorts] #55128: boost @1.59.0_3+no_single+no_static+python27 Error: Failed to deactivate boost: error deleting "/opt/local/include/boost/fusion/sequence/comparison/enable_comparison.hpp": permission denied
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #55798: eccodes +python27 variant
MacPorts
- [MacPorts] #55738: py-josepy @1.0.1 conflicts with py-acme @0.20.0
MacPorts
- [MacPorts] #55302: libgcc fails to build on SnowLeopard: error: 'getsectiondata' was not declared in this scope
MacPorts
- [MacPorts] #55798: eccodes +python27 variant
MacPorts
- [MacPorts] #55798: eccodes +python27 variant
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #55641: zmq @4.2.3 fails to build on 10.7 and 10.8 due to C++11
MacPorts
- [MacPorts] #55641: zmq @4.2.3 fails to build on 10.7 and 10.8 due to C++11
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #55793: bladeRF @20180201 Fails to build on Mavericks
MacPorts
- [MacPorts] #54215: gcc7, libgcc: broken on powerpc
MacPorts
- [MacPorts] #53307: Update libvpx to v1.6.1
MacPorts
- [MacPorts] #50288: UPDATE: gpsd-3.16
MacPorts
- [MacPorts] #50288: UPDATE: gpsd-3.16
MacPorts
- [MacPorts] #55799: apple-gcc42 is not supported on OS X versions newer than El Capitan (Using HighSierra)
MacPorts
- [MacPorts] #55799: apple-gcc42 is not supported on OS X versions newer than El Capitan (Using HighSierra)
MacPorts
- [MacPorts] #41392: Virtualbox @4.2.14: failed to determine Darwin version
MacPorts
- [MacPorts] #41392: Virtualbox @4.2.14: failed to determine Darwin version
MacPorts
- [MacPorts] #55799: apple-gcc42 is not supported on OS X versions newer than El Capitan (Using HighSierra)
MacPorts
- [MacPorts] #55799: apple-gcc42 is not supported on OS X versions newer than El Capitan (Using HighSierra)
MacPorts
- [MacPorts] #55799: apple-gcc42 is not supported on OS X versions newer than El Capitan (Using HighSierra)
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: passing 'int' to parameter of incompatible type '__m256i' (vector of 4 'long long' values) (was: libvpx 1.7.0_0 build fails)
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: passing 'int' to parameter of incompatible type '__m256i' (vector of 4 'long long' values)
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int' (was: libvpx 1.7.0_0 build fails: error: passing 'int' to parameter of incompatible type '__m256i' (vector of 4 'long long' values))
MacPorts
- [MacPorts] #41392: Virtualbox @4.2.14: failed to determine Darwin version
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int'
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int'
MacPorts
- [MacPorts] #55801: ncurses @6.1 universal : Failed to build ncurses: command execution failed
MacPorts
- [MacPorts] #55801: ncurses @6.1 universal : Failed to build ncurses: command execution failed
MacPorts
- [MacPorts] #55801: ncurses @6.1 universal : Failed to build ncurses: command execution failed
MacPorts
- [MacPorts] #55801: ncurses @6.1 universal : Failed to build ncurses: command execution failed
MacPorts
- [MacPorts] #55801: ncurses @6.1 universal : Failed to build ncurses: command execution failed
MacPorts
- [MacPorts] #55801: ncurses @6.1 failing to build with non-default C++ stdlib (was: ncurses @6.1 universal : Failed to build ncurses: command execution failed)
MacPorts
- [MacPorts] #55801: ncurses @6.1 failing to build with non-default C++ stdlib
MacPorts
- [MacPorts] #55801: ncurses @6.1 failing to build with non-default C++ stdlib
MacPorts
- [MacPorts] #55801: ncurses @6.1 failing to build with non-default C++ stdlib
MacPorts
- [MacPorts] #55801: ncurses @6.1 failing to build with non-default C++ stdlib
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int'
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int'
MacPorts
- [MacPorts] #55801: ncurses @6.1 failing to build with non-default C++ stdlib
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int'
MacPorts
- [MacPorts] #55800: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int'
MacPorts
- [MacPorts] #29055: Python27 not compiling with universal variant (ppc, ppc64)
MacPorts
- [MacPorts] #55802: a dejavu font is not found during auto-multiple-choice building
MacPorts
- [MacPorts] #55802: a dejavu font is not found during auto-multiple-choice building
MacPorts
- [MacPorts] #49767: python27 @2.7.10_3 org.macports.destroot for port python27 returned: command execution failed
MacPorts
- [MacPorts] #39223: python27 @2.7.5_0: incorrect LINKFORSHARED from distutils.sysconfig
MacPorts
- [MacPorts] #55800: libvpx @1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int' (was: libvpx 1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int')
MacPorts
- [MacPorts] #55800: libvpx @1.7.0_0 build fails: error: assigning to '__m512i' (vector of 8 'long long' values) from incompatible type 'int'
MacPorts
- [MacPorts] #55788: Please update nauty
MacPorts
- [MacPorts] #55775: neovim @0.2.2: mouse broken with ncurses @6.1
MacPorts
- [MacPorts] #55775: neovim @0.2.2: mouse broken with ncurses @6.1
MacPorts
- [MacPorts] #55775: neovim @0.2.2: mouse broken with ncurses @6.1
MacPorts
- [MacPorts] #55775: neovim @0.2.2: mouse broken with ncurses @6.1
MacPorts
- [MacPorts] #55788: Please update nauty
MacPorts
- [MacPorts] #55803: netperf master_sites changed
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #55803: netperf master_sites changed
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #55803: netperf master_sites changed
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #55802: a dejavu font is not found during auto-multiple-choice building
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #55424: Failed to checksum py27-pync
MacPorts
- [MacPorts] #55424: Failed to checksum py27-pync
MacPorts
- [MacPorts] #54993: Processing of port openmpi-gcc7 failed
MacPorts
- [MacPorts] #55804: SDL cursor lacks transparency in High Sierra (macOS 10.13)
MacPorts
- [MacPorts] #55804: SDL cursor lacks transparency in High Sierra (macOS 10.13)
MacPorts
- [MacPorts] #55788: Please update nauty
MacPorts
- [MacPorts] #55804: libsdl: cursor lacks transparency in High Sierra (macOS 10.13) (was: SDL cursor lacks transparency in High Sierra (macOS 10.13))
MacPorts
- [MacPorts] #55804: libsdl: cursor lacks transparency in High Sierra (macOS 10.13)
MacPorts
- [MacPorts] #55804: libsdl: cursor lacks transparency in High Sierra (macOS 10.13)
MacPorts
- [MacPorts] #55804: libsdl: cursor lacks transparency in High Sierra (macOS 10.13)
MacPorts
- [MacPorts] #54348: sysutils/salt @2017.5 [enhancement] Create (if missing) salt master, minion, etc. configs with reasonable opinionated defaults for MacPorts
MacPorts
- [MacPorts] #55804: libsdl: cursor lacks transparency in High Sierra (macOS 10.13)
MacPorts
- [MacPorts] #55805: Wrong path in markdown script
MacPorts
- [MacPorts] #55805: Wrong path in markdown script
MacPorts
- [MacPorts] #55805: Wrong path in markdown script
MacPorts
- [MacPorts] #55267: qucs @0.0.18 fails to configure and build
MacPorts
- [MacPorts] #55267: qucs @0.0.18 fails to configure and build
MacPorts
- [MacPorts] #55267: qucs @0.0.18 fails to configure and build
MacPorts
- [MacPorts] #55689: [Port Abandoned] py-hpack py-mitmproxy py-netlib py-urwid
MacPorts
- [MacPorts] #55806: kotlin's `-version` argument causes error.
MacPorts
- [MacPorts] #55708: [Port Abandoned] ports maintained by afb
MacPorts
- [MacPorts] #55742: [Port Abandoned] tbb
MacPorts
- [MacPorts] #23944: tbb fails to build on PowerPC
MacPorts
- [MacPorts] #55744: [Port Abandoned] ports maintained by dreamind.de:dreamind
MacPorts
- [MacPorts] #55745: [Port Abandoned] ports maintained by m4x.org:db_macports
MacPorts
- [MacPorts] #55745: [Port Abandoned] ports maintained by m4x.org:db_macports
MacPorts
- [MacPorts] #55747: [Port Abandoned] atf
MacPorts
- [MacPorts] #37091: atf @0.16 need the tools to be built as well as the library
MacPorts
- [MacPorts] #47788: atf: Update to latest version
MacPorts
- [MacPorts] #55398: atf: use xmlcatalog portgroup?
MacPorts
- [MacPorts] #55732: Migration Problems
MacPorts
- [MacPorts] #55805: multimarkdown: Wrong path in markdown script (was: Wrong path in markdown script)
MacPorts
- [MacPorts] #55806: kotlin's `-version` argument causes error.
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55712: cmark: New port needed
MacPorts
- [MacPorts] #55806: kotlin's `-version` argument causes error.
MacPorts
- [MacPorts] #55806: kotlin's `-version` argument causes error.
MacPorts
- [MacPorts] #55808: Submission of new port aidadoc
MacPorts
- [MacPorts] #55808: Submission of new port aidadoc
MacPorts
- [MacPorts] #55732: Migration Problems
MacPorts
- [MacPorts] #55802: a dejavu font is not found during auto-multiple-choice building
MacPorts
- [MacPorts] #55809: Error: Failed to fetch libomp: Connection timed out ...
MacPorts
- [MacPorts] #55809: Error: Failed to fetch libomp: Connection timed out ...
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55810: Demeter: use perl 5.26 instead of 5.24
MacPorts
- [MacPorts] #55810: Demeter: use perl 5.26 instead of 5.24
MacPorts
- [MacPorts] #55811: fftw-3: update to 3.3.7; use more intrinsics flags when not universal
MacPorts
- [MacPorts] #55811: fftw-3: update to 3.3.7; use more intrinsics flags when not universal
MacPorts
- [MacPorts] #55811: fftw-3: update to 3.3.7; use more intrinsics flags when not universal
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55811: fftw-3: update to 3.3.7; use more intrinsics flags when not universal
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55499: mingw-w64: missing secure api support
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55809: Error: Failed to fetch libomp: Connection timed out ...
MacPorts
- [MacPorts] #55499: mingw-w64: missing secure api support
MacPorts
- [MacPorts] #55812: geant4.10.4: error during configuration on legacy systems
MacPorts
- [MacPorts] #55813: clhep: fails to build on legacy systems
MacPorts
- [MacPorts] #55812: geant4.10.4: error during configuration on legacy systems
MacPorts
- [MacPorts] #55814: py-isodate: restore py34 subport
MacPorts
- [MacPorts] #55803: netperf master_sites changed
MacPorts
- [MacPorts] #55815: hevea @2.25_1 missing dependency on port "ocaml-ocamlbuild"
MacPorts
- [MacPorts] #55814: py-isodate: restore py34 subport
MacPorts
- [MacPorts] #55812: geant4.10.4: error during configuration on legacy systems
MacPorts
- [MacPorts] #55806: kotlin's `-version` argument causes error.
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55816: lua52 @5.2.4_1 : cannot build with OS X 10.4.11
MacPorts
- [MacPorts] #55816: lua52 @5.2.4_1 : cannot build with OS X 10.4.11
MacPorts
- [MacPorts] #55816: lua52 @5.2.4_1 : cannot build with OS X 10.4.11
MacPorts
- [MacPorts] #55816: lua52 @5.2.4_1 : cannot build with OS X 10.4.11
MacPorts
- [MacPorts] #55814: py-isodate: restore py34 subport
MacPorts
- [MacPorts] #55817: osxfuse fails to install (High Sierra)
MacPorts
- [MacPorts] #55817: osxfuse fails to install (High Sierra)
MacPorts
- [MacPorts] #55817: osxfuse fails to install (High Sierra)
MacPorts
- [MacPorts] #54939: osxfuse @3.7.1: Library not loaded: @rpath/libclang.dylib (LoadError)
MacPorts
- [MacPorts] #55817: osxfuse fails to install (High Sierra)
MacPorts
- [MacPorts] #55817: osxfuse fails to install (High Sierra)
MacPorts
- [MacPorts] #55817: osxfuse fails to install (High Sierra)
MacPorts
- [MacPorts] #55812: geant4.10.4: error during configuration on legacy systems
MacPorts
- [MacPorts] #55818: linphone 3.5.2_1.darwin_15.x86_64 build fails with 'too many errors emmitted'
MacPorts
- [MacPorts] #55818: linphone 3.5.2_1.darwin_15.x86_64 build fails with 'too many errors emmitted'
MacPorts
- [MacPorts] #55813: clhep: fails to build on legacy systems
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55807: boost @1.65.1_3 depends on itself
MacPorts
- [MacPorts] #55817: osxfuse fails to install (High Sierra)
MacPorts
- [MacPorts] #55818: linphone 3.5.2_1.darwin_15.x86_64 build fails with 'too many errors emmitted'
MacPorts
- [MacPorts] #22471: Debugging options for startupitems (launchd / daemondo)
MacPorts
- [MacPorts] #55813: clhep: fails to build on legacy systems
MacPorts
- [MacPorts] #55819: swig-php @3.0.12: patch fails
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55821: jpeg @9c different checksum
MacPorts
- [MacPorts] #55822: Upgrade outdated fails building libtorrent
MacPorts
- [MacPorts] #55821: jpeg @9c different checksum
MacPorts
- [MacPorts] #55822: Upgrade outdated fails building libtorrent
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55806: kotlin's `-version` argument causes error.
MacPorts
- [MacPorts] #54986: swig-php: Add variants for php70, php71, make php71 the default
MacPorts
- [MacPorts] #55819: swig-php @3.0.12: patch fails
MacPorts
- [MacPorts] #55822: Upgrade outdated fails building libtorrent
MacPorts
- [MacPorts] #55822: Upgrade outdated fails building libtorrent
MacPorts
- [MacPorts] #55821: jpeg @9c different checksum
MacPorts
- [MacPorts] #55809: Error: Failed to fetch libomp: Connection timed out ...
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55823: avidemux @2.6.20: some libraries installed with incorrect permissions, causes Trace/BPT trap abort on launching
MacPorts
- [MacPorts] #55731: bazel @0.5.2: "Cannot find requested resource bundle for locale en_US"
MacPorts
- [MacPorts] #55736: bazel @0.5.2 prints a bunch of junk to the terminal window while building
MacPorts
- [MacPorts] #55407: Update Bazel to latest version
MacPorts
- [MacPorts] #55824: Request a port for library
MacPorts
- [MacPorts] #55824: Request a port for library
MacPorts
- [MacPorts] #55824: Request a port for libraqm (was: Request a port for library)
MacPorts
- [MacPorts] #55819: swig-php @3.0.12: patch fails
MacPorts
- [MacPorts] #55819: swig-php @3.0.12: patch fails
MacPorts
- [MacPorts] #55825: Port py-gdal does not download GDAL-2.2.3.tar.gz from all mirror server
MacPorts
- [MacPorts] #55824: Request a port for libraqm
MacPorts
- [MacPorts] #55825: Port py-gdal does not download GDAL-2.2.3.tar.gz from all mirror server
MacPorts
- [MacPorts] #55825: Port py-gdal does not download GDAL-2.2.3.tar.gz from all mirror server
MacPorts
- [MacPorts] #54986: swig-php: Add variants for php70, php71, make php71 the default
MacPorts
- [MacPorts] #55825: Port py-gdal does not download GDAL-2.2.3.tar.gz from all mirror server
MacPorts
- [MacPorts] #54986: swig-php: Add variants for php70, php71, make php71 the default
MacPorts
- [MacPorts] #54986: swig-php: Add variants for php70, php71, make php71 the default
MacPorts
- [MacPorts] #55826: py27-psycopg2 does not download psycopg2-2.7.4.tar.gz from mirror
MacPorts
- [MacPorts] #55826: py27-psycopg2 does not download psycopg2-2.7.4.tar.gz from mirror
MacPorts
- [MacPorts] #55821: jpeg @9c different checksum
MacPorts
- [MacPorts] #55821: jpeg @9c different checksum
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55827: Installing gnuplot, cvs, ghostscript, ..... each fails with the same error.
MacPorts
- [MacPorts] #55827: Installing gnuplot, cvs, ghostscript, ..... each fails with the same error.
MacPorts
- [MacPorts] #55826: py27-psycopg2 does not download psycopg2-2.7.4.tar.gz from mirror
MacPorts
- [MacPorts] #55827: Installing gnuplot, cvs, ghostscript, ..... each fails with the same error.
MacPorts
- [MacPorts] #55827: Installing gnuplot, cvs, ghostscript, ..... each fails with the same error.
MacPorts
- [MacPorts] #23677: Deactivating a port should automatically unload daemons (was: Uninstall of a port should automatically unload daemons)
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory (was: Installing gnuplot, cvs, ghostscript, ..... each fails with the same error.)
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #23677: Deactivating a port should automatically unload daemons
MacPorts
- [MacPorts] #22471: Debugging options for startupitems (launchd / daemondo)
MacPorts
- [MacPorts] #23677: Deactivating a port should automatically unload daemons
MacPorts
- [MacPorts] #55823: avidemux @2.6.20: some libraries installed with incorrect permissions, causes Trace/BPT trap abort on launching
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55789: py27-wxpython-3.0 @3.0.2.0: Checksum mismatch
MacPorts
- [MacPorts] #55823: avidemux @2.6.20: some libraries installed with incorrect permissions, causes Trace/BPT trap abort on launching
MacPorts
- [MacPorts] #55271: geant4.10.3 @4.10.03.p02 +clhep+gdml+opengl_x11+qt+raytracer_x11: Failed to checksum geant4.10.3
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55811: fftw-3: update to 3.3.7; use more intrinsics flags when not universal
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55820: libvpx @1.7.0: vpx_dsp/x86/sad4d_avx512.c fails build El Capitan
MacPorts
- [MacPorts] #55829: FreeRDP @1.1.0-beta1-20170727: update to 2.0.0-rc1
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #44395: glib2, glib2-devel: don't add -I${prefix}/include to glib-2.0.pc
MacPorts
- [MacPorts] #44395: glib2, glib2-devel: don't add -I${prefix}/include to glib-2.0.pc
MacPorts
- [MacPorts] #9937: glib2: glib-2.0.pc Cflags needs -I${includedir}
MacPorts
- [MacPorts] #55577: getting rid of unforeseen -I${prefix}/include option adding and its potential side-effects
MacPorts
- [MacPorts] #55829: FreeRDP @1.1.0-beta1-20170727: update to 2.0.0-rc1
MacPorts
- [MacPorts] #55830: Activating Thunar Fails When Installing Xfce
MacPorts
- [MacPorts] #55830: Activating Thunar Fails When Installing Xfce
MacPorts
- [MacPorts] #55830: Activating Thunar Fails When Installing Xfce
MacPorts
- [MacPorts] #55577: getting rid of unforeseen -I${prefix}/include option adding and its potential side-effects
MacPorts
- [MacPorts] #55577: getting rid of unforeseen -I${prefix}/include option adding and its potential side-effects
MacPorts
- [MacPorts] #55551: boost update to 1.66.0 release
MacPorts
- [MacPorts] #55831: postgis2 fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55831: postgis2 fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55831: postgis2 fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55832: py36-matplotlib fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55832: py36-matplotlib fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55832: py36-matplotlib fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55833: py27-pyqt4 fails to configure on Snow Leopard
MacPorts
- [MacPorts] #55833: py27-pyqt4 fails to configure on Snow Leopard
MacPorts
- [MacPorts] #55832: py-matplotlib fails to compile on Snow Leopard (was: py36-matplotlib fails to compile on Snow Leopard)
MacPorts
- [MacPorts] #55831: postgis2 fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55833: py27-pyqt4 fails to configure on Snow Leopard
MacPorts
- [MacPorts] #55831: postgis2 fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55834: LibreCAD: g++-mp-4.8: error: unrecognized command line option '-arch'
MacPorts
- [MacPorts] #55833: py27-pyqt4 fails to configure on Snow Leopard
MacPorts
- [MacPorts] #55835: mdnsd fails to build on macOS Sierra 10.12.6: make: *** [mhttp] Error 1
MacPorts
- [MacPorts] #55835: mdnsd fails to build on macOS Sierra 10.12.6: make: *** [mhttp] Error 1
MacPorts
- [MacPorts] #31798: Installation from binary package does not notify user of need to start launch item
MacPorts
- [MacPorts] #31798: Installation from binary package does not notify user of need to start launch item
MacPorts
- [MacPorts] #55836: boost-gil-numeric: fetch fails
MacPorts
- [MacPorts] #55837: boost-process installs files already provided by boost
MacPorts
- [MacPorts] #55838: arabica: error: use of undeclared identifier 'sputc'
MacPorts
- [MacPorts] #55832: py-matplotlib fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55740: startupitem / launchd plist / port load instructions are not printed when installing from a binary archive
MacPorts
- [MacPorts] #31798: Installation from binary package does not notify user of need to start launch item
MacPorts
- [MacPorts] #55740: startupitem / launchd plist / port load instructions are not printed when installing from a binary archive
MacPorts
- [MacPorts] #55740: startupitem / launchd plist / port load instructions are not printed when installing from a binary archive
MacPorts
- [MacPorts] #55831: postgis2 fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55833: py27-pyqt4 fails to configure on Snow Leopard
MacPorts
- [MacPorts] #55834: LibreCAD: g++-mp-4.8: error: unrecognized command line option '-arch'
MacPorts
- [MacPorts] #55839: py-pptx checksum mismatch reporteded
MacPorts
- [MacPorts] #55840: freecad @0.16_4 fails to build on Mavericks
MacPorts
- [MacPorts] #55840: freecad @0.16_4 fails to build on Mavericks
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #52585: libcxxabi -- attempts to add thread-local-storage (TLS) to <10.9
MacPorts
- [MacPorts] #53074: clhep @2.3.4.3: fails to build on 10.6 due to unsupported thread-local storage
MacPorts
- [MacPorts] #52585: libcxxabi -- attempts to add thread-local-storage (TLS) to <10.9
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55841: htcondor @8.6.8: epstopdf: command not found
MacPorts
- [MacPorts] #55842: gr-lora: error: variable length array of non-POD element type 'gr_complex'
MacPorts
- [MacPorts] #55843: glob2 is not using the right compiler nor -arch flags
MacPorts
- [MacPorts] #55844: glob2: Update to 0.9.4.4
MacPorts
- [MacPorts] #55845: glob2 @0.9.3: error: 'BuildProject' is a private member of 'Game'
MacPorts
- [MacPorts] #55846: gerbil @1.0b: Package "QT" not found!
MacPorts
- [MacPorts] #55839: py-pptx @0.6.2: checksum mismatch (was: py-pptx checksum mismatch reporteded)
MacPorts
- [MacPorts] #55847: freecad: Update to 0.16.6712
MacPorts
- [MacPorts] #55848: clojure: request update to 1.9
MacPorts
- [MacPorts] #55832: py-matplotlib fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55847: freecad: Update to 0.16.6712
MacPorts
- [MacPorts] #55847: freecad: Update to 0.16.6712
MacPorts
- [MacPorts] #55840: freecad @0.16_4 fails to build on Mavericks
MacPorts
- [MacPorts] #55847: freecad: Update to 0.16.6712
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55780: ffmpeg @3.4.1_3: ERROR: libxvid not found
MacPorts
- [MacPorts] #55828: Audacity can no longer find lame
MacPorts
- [MacPorts] #55849: gnome-internet-radio-locator 1.0.4
MacPorts
- [MacPorts] #55849: gnome-internet-radio-locator 1.0.4
MacPorts
- [MacPorts] #55780: ffmpeg @3.4.1_3: ERROR: libxvid not found
MacPorts
- [MacPorts] #55849: gnome-internet-radio-locator 1.0.4
MacPorts
- [MacPorts] #55847: freecad: Update to 0.16.6712
MacPorts
- [MacPorts] #55849: gnome-internet-radio-locator 1.0.4
MacPorts
- [MacPorts] #55849: gnome-internet-radio-locator 1.0.4
MacPorts
- [MacPorts] #36770: Need for a fix regarding mechanism for startupitem handling
MacPorts
- [MacPorts] #36770: Need for a fix regarding mechanism for startupitem handling
MacPorts
- [MacPorts] #55833: py27-pyqt4 fails to configure on Snow Leopard
MacPorts
- [MacPorts] #55850: seqan-apps @2.2.0: fatal error: 'cinttypes' file not found
MacPorts
- [MacPorts] #55851: seqan, seqan-apps: Update to 2.4.0
MacPorts
- [MacPorts] #54372: scidavis @1.22 isn't using the right compiler (was: scidavis @1.14 isn't using the right compiler)
MacPorts
- [MacPorts] #55829: FreeRDP @1.1.0-beta1-20170727: update to 2.0.0-rc1
MacPorts
- [MacPorts] #55786: libopenraw: Use cxx11 1.1 portgroup
MacPorts
- [MacPorts] #55389: gegl-devel fails to build against ffmpeg-devel
MacPorts
- [MacPorts] #55787: gegl @0.2.0: Fix libopenraw usage
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55798: eccodes +python27 variant
MacPorts
- [MacPorts] #55568: hdf5-18: Replaced by hdf5
MacPorts
- [MacPorts] #55734: dcw-gmt @1.1.2: update to 1.1.3
MacPorts
- [MacPorts] #55601: cdo @1.9.2: error: variable has incomplete type 'struct mach_task_basic_info'
MacPorts
- [MacPorts] #55798: eccodes +python27 variant
MacPorts
- [MacPorts] #55798: eccodes +python27 variant
MacPorts
- [MacPorts] #55798: eccodes +python27 variant
MacPorts
- [MacPorts] #55792: TexLive Missing newtxtext and newtxmath
MacPorts
- [MacPorts] #55692: xindy does not need supported_archs
MacPorts
- [MacPorts] #55692: xindy does not need supported_archs
MacPorts
- [MacPorts] #55691: xindy should depend on MacPorts texlive-latex and MacPorts Perl
MacPorts
- [MacPorts] #55691: xindy should depend on MacPorts texlive-latex and MacPorts Perl
MacPorts
- [MacPorts] #55690: xindy does not build with Perl 5.26
MacPorts
- [MacPorts] #55690: xindy does not build with Perl 5.26
MacPorts
- [MacPorts] #52715: aqbanking5-svn: needs to be replaced by aqbanking5-git
MacPorts
- [MacPorts] #55389: gegl-devel fails to build against ffmpeg-devel
MacPorts
- [MacPorts] #55853: netpbm @10.81.02: fetch fails with HTTP 429 'Too Many Requests'
MacPorts
- [MacPorts] #55853: netpbm @10.81.02: fetch fails with HTTP 429 'Too Many Requests'
MacPorts
- [MacPorts] #55854: Error: Processing of port GLC_lib failed
MacPorts
- [MacPorts] #55854: Error: Processing of port GLC_lib failed
MacPorts
- [MacPorts] #55855: Error: Processing of port glpng failed
MacPorts
- [MacPorts] #55855: Error: Processing of port glpng failed
MacPorts
- [MacPorts] #55856: Error: Processing of port gtkglextmm failed
MacPorts
- [MacPorts] #55856: Error: Processing of port gtkglextmm failed
MacPorts
- [MacPorts] #55854: Error: Processing of port GLC_lib failed
MacPorts
- [MacPorts] #55856: Error: Processing of port gtkglextmm failed
MacPorts
- [MacPorts] #55855: Error: Processing of port glpng failed
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55853: netpbm @10.81.02: fetch fails with HTTP 429 'Too Many Requests'
MacPorts
- [MacPorts] #55854: Error: Processing of port GLC_lib failed
MacPorts
- [MacPorts] #55855: Error: Processing of port glpng failed
MacPorts
- [MacPorts] #55858: swi-prolog-devel @7.7.9: update to 7.7.10
MacPorts
- [MacPorts] #55858: swi-prolog-devel @7.7.9: update to 7.7.10
MacPorts
- [MacPorts] #55859: pulseaudio fails to build without /opt/local/bin/gmkdir
MacPorts
- [MacPorts] #55859: pulseaudio fails to build without /opt/local/bin/gmkdir
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55860: ImageMagick: request update to version 7.0.7-22
MacPorts
- [MacPorts] #55860: ImageMagick: request update to version 7.0.7-22
MacPorts
- [MacPorts] #55860: ImageMagick: request update to version 7.0.7-22
MacPorts
- [MacPorts] #55860: ImageMagick: request update to version 7.0.7-22
MacPorts
- [MacPorts] #55860: ImageMagick: request update to version 7.0.7-22
MacPorts
- [MacPorts] #55659: bazel doesn't build with JDK 9.0.1
MacPorts
- [MacPorts] #40074: Add macports.conf setting controlling startupitem.autostart
MacPorts
- [MacPorts] #40074: Add macports.conf setting controlling startupitem.autostart
MacPorts
- [MacPorts] #55860: ImageMagick: request update to version 7.0.7-22
MacPorts
- [MacPorts] #55659: bazel doesn't build with JDK 9.0.1
MacPorts
- [MacPorts] #55860: ImageMagick: request update to version 7.0.7-22
MacPorts
- [MacPorts] #51310: ImageMagick: update to 7.0.1-1
MacPorts
- [MacPorts] #55859: pulseaudio fails to build without /opt/local/bin/gmkdir
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55853: netpbm @10.81.02: fetch fails with HTTP 429 'Too Many Requests'
MacPorts
- [MacPorts] #46833: glpng fails to build due to macro conflict with libpng
MacPorts
- [MacPorts] #55855: Error: Processing of port glpng failed
MacPorts
- [MacPorts] #46833: glpng @1.45: fails to build due to macro conflict with libpng (was: glpng fails to build due to macro conflict with libpng)
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #46833: glpng @1.45: fails to build due to macro conflict with libpng
MacPorts
- [MacPorts] #55856: gtkglextmm @1.2.0: error: expected '; ' at end of declaration list (was: Error: Processing of port gtkglextmm failed)
MacPorts
- [MacPorts] #29892: GLC_lib: update to version 3.0.1 (was: GLC_lib update to version 2.2.0.)
MacPorts
- [MacPorts] #55854: GLC_lib @1.2.0: error: 'sqrt' is missing exception specification 'throw()' (was: Error: Processing of port GLC_lib failed)
MacPorts
- [MacPorts] #55682: I can't download macOS High Sierra v10.13
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #52585: libcxxabi -- attempts to add thread-local-storage (TLS) to <10.9
MacPorts
- [MacPorts] #52585: libcxxabi -- attempts to add thread-local-storage (TLS) to <10.7 (was: libcxxabi -- attempts to add thread-local-storage (TLS) to <10.9)
MacPorts
- [MacPorts] #55861: mas @1.3.1: update to 1.4.1
MacPorts
- [MacPorts] #55854: GLC_lib @1.2.0: error: 'sqrt' is missing exception specification 'throw()'
MacPorts
- [MacPorts] #55862: Portfile for smtpping
MacPorts
- [MacPorts] #55862: Portfile for smtpping
MacPorts
- [MacPorts] #54372: scidavis @1.22 isn't using the right compiler
MacPorts
- [MacPorts] #55852: py-ndg_httpsclient wrong version deployed
MacPorts
- [MacPorts] #55781: kdevplatform @4.7.4: error: expected expression
MacPorts
- [MacPorts] #55781: kdevplatform @4.7.4: error: expected expression
MacPorts
- [MacPorts] #55781: kdevplatform @4.7.4: error: expected expression
MacPorts
- [MacPorts] #55781: kdevplatform @4.7.4: error: expected expression
MacPorts
- [MacPorts] #52585: libcxxabi -- attempts to add thread-local-storage (TLS) to <10.7
MacPorts
- [MacPorts] #55862: Portfile for smtpping
MacPorts
- [MacPorts] #55862: Portfile for smtpping
MacPorts
- [MacPorts] #55862: Portfile for smtpping
MacPorts
- [MacPorts] #55862: Portfile for smtpping
MacPorts
- [MacPorts] #55862: Portfile for smtpping
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #54364: p5.24-io-socket-ssl: failed to build on Snow Leopard (with libc++)
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55846: gerbil @1.0b: Package "QT" not found!
MacPorts
- [MacPorts] #55846: gerbil @1.0b: Package "QT" not found!
MacPorts
- [MacPorts] #55863: Error when I install qgis
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55863: Error when I install qgis
MacPorts
- [MacPorts] #55863: Error when I install qgis
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55863: qgis @2.1i8.14: fatal error: 'initializer_list' file not found (was: Error when I install qgis)
MacPorts
- [MacPorts] #41417: libtorrent, libtorrent-devel: fatal error: 'tr1/functional' file not found
MacPorts
- [MacPorts] #55822: libtorrent: fatal error: 'tr1/functional' file not found (was: Upgrade outdated fails building libtorrent)
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55861: mas @1.3.1: update to 1.4.1
MacPorts
- [MacPorts] #55685: mas crash on signin
MacPorts
- [MacPorts] #41417: libtorrent, libtorrent-devel: fatal error: 'tr1/functional' file not found
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55864: Privoxy install fails on High Sierra
MacPorts
- [MacPorts] #55864: Privoxy install fails on High Sierra
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #45461: privoxy: error: The given value 'privoxy' does not match group entry
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55864: privoxy @3.0.26: error: The given value 'privoxy' does not match group entry (was: Privoxy install fails on High Sierra)
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55172: physfs: Update to 3.0.1 and fix livecheck
MacPorts
- [MacPorts] #29892: GLC_lib: update to version 3.0.1
MacPorts
- [MacPorts] #55288: QGIS Fails to Configure/Install - CMAKE cannot find FindQJSON
MacPorts
- [MacPorts] #55863: qgis @2.18.14: fatal error: 'initializer_list' file not found (was: qgis @2.1i8.14: fatal error: 'initializer_list' file not found)
MacPorts
- [MacPorts] #29892: GLC_lib: update to version 3.0.1
MacPorts
- [MacPorts] #55853: netpbm @10.81.02: fetch fails with HTTP 429 'Too Many Requests'
MacPorts
- [MacPorts] #55814: py-isodate: restore py34 subport
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55814: py-isodate: restore py34 subport
MacPorts
- [MacPorts] #55814: py-isodate: restore py34 subport
MacPorts
- [MacPorts] #52585: libcxxabi -- attempts to add thread-local-storage (TLS) to <10.7
MacPorts
- [MacPorts] #55865: multimarkdown @6.2.3: new release 6.3.0 fixes regression
MacPorts
- [MacPorts] #55866: Entities and includes not processed in mapnik XML stylesheets
MacPorts
- [MacPorts] #55866: Entities and includes not processed in mapnik XML stylesheets
MacPorts
- [MacPorts] #55865: multimarkdown @6.2.3: new release 6.3.0 fixes regression
MacPorts
- [MacPorts] #55832: py-matplotlib fails to compile on Snow Leopard
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55868: lazy symbol binding failed
MacPorts
- [MacPorts] #55866: Entities and includes not processed in mapnik XML stylesheets
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55868: lazy symbol binding failed
MacPorts
- [MacPorts] #55869: libftdi1: add_dependencies called with incorrect number of arguments
MacPorts
- [MacPorts] #55869: libftdi1: add_dependencies called with incorrect number of arguments
MacPorts
- [MacPorts] #55288: QGIS Fails to Configure/Install - CMAKE cannot find FindQJSON
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55870: gtk3 @3.22.28_0+quartz "Symbol not found"
MacPorts
- [MacPorts] #55866: Entities and includes not processed in mapnik XML stylesheets
MacPorts
- [MacPorts] #55870: gtk3 @3.22.28_0+quartz "Symbol not found"
MacPorts
- [MacPorts] #55829: FreeRDP @1.1.0-beta1-20170727: update to 2.0.0-rc1
MacPorts
- [MacPorts] #55288: QGIS Fails to Configure/Install - CMAKE cannot find FindQJSON
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55871: [Port Abandoned] arb
MacPorts
- [MacPorts] #55839: py-pptx @0.6.2: checksum mismatch
MacPorts
- [MacPorts] #55839: py-pptx @0.6.2: checksum mismatch
MacPorts
- [MacPorts] #55872: gcc7 @7.3.0: Selftests fail with "Illegal instruction: 4"
MacPorts
- [MacPorts] #55872: gcc7 @7.3.0: Selftests fail with "Illegal instruction: 4"
MacPorts
- [MacPorts] #55866: Entities and includes not processed in mapnik XML stylesheets
MacPorts
- [MacPorts] #55866: Entities and includes not processed in mapnik XML stylesheets
MacPorts
- [MacPorts] #55872: gcc7 @7.3.0: Selftests fail with "Illegal instruction: 4"
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55827: sandbox-exec: execvp() of 'sh' failed: No such file or directory
MacPorts
- [MacPorts] #55872: gcc7 @7.3.0: Selftests fail with "Illegal instruction: 4"
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55867: lyx 2.2.3 +qt5 fails to be configured
MacPorts
- [MacPorts] #55582: mariadb-10.1 @10.1.29: update to 10.1.31 (was: mariadb-10.1 @10.1.29: update to 10.1.30)
MacPorts
- [MacPorts] #55873: mariadb-10.2 @10.2.11: update to 10.2.13
MacPorts
- [MacPorts] #55582: mariadb-10.1 @10.1.29: update to 10.1.31
MacPorts
- [MacPorts] #55874: port request: 'fzf'
MacPorts
- [MacPorts] #55858: swi-prolog-devel @7.7.9: update to 7.7.10
MacPorts
- [MacPorts] #54743: Binary-only mode requested with no usable archive sites configured
MacPorts
- [MacPorts] #37093: port log gets written to different port's logfile
MacPorts
- [MacPorts] #55875: Build failure for octave-control
MacPorts
- [MacPorts] #55875: Build failure for octave-control
MacPorts
- [MacPorts] #55876: matplotlib-basemap port is out of date
MacPorts
- [MacPorts] #55877: petsc-devel 3.7.4_1 +devel +openmpi_devel..: missing PETSC.pc file
MacPorts
- [MacPorts] #55875: Build failure for octave-control
MacPorts
- [MacPorts] #55876: matplotlib-basemap port is out of date
MacPorts
- [MacPorts] #55877: petsc-devel 3.7.4_1 +devel +openmpi_devel..: missing PETSC.pc file
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55878: lowdown @0.3.1: Fix mandir; fix universal variant; fix build on Snow Leopard and earlier
MacPorts
- [MacPorts] #55878: lowdown @0.3.1: Fix mandir; fix universal variant; fix build on Snow Leopard and earlier
MacPorts
- [MacPorts] #55878: lowdown @0.3.1: Fix mandir; fix universal variant; fix build on Snow Leopard and earlier
MacPorts
- [MacPorts] #55878: lowdown @0.3.1: Fix mandir; fix universal variant; fix build on Snow Leopard and earlier
MacPorts
- [MacPorts] #55879: cargo: add universal variant
MacPorts
- [MacPorts] #55880: cargo: installs_libs no?
MacPorts
- [MacPorts] #55868: gtk3: lazy symbol binding failed (was: lazy symbol binding failed)
MacPorts
- [MacPorts] #55881: MacVim should have variant to override system vi, vim, vimdiff, view, ex
MacPorts
- [MacPorts] #55560: Failed to locate 'lbzip2' in path: '/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin' or at its MacPorts configuration time location, did you move it?
MacPorts
- [MacPorts] #55875: octave-control @3.0.0: ld: library not found for -lgfortran (was: Build failure for octave-control)
MacPorts
- [MacPorts] #55853: netpbm @10.81.02: fetch fails with HTTP 429 'Too Many Requests'
MacPorts
- [MacPorts] #55881: MacVim should have variant to override system vi, vim, vimdiff, view, ex
MacPorts
- [MacPorts] #55853: netpbm @10.81.02: fetch fails with HTTP 429 'Too Many Requests'
MacPorts
- [MacPorts] #55882: Upgrade libmpc to mpc-1.1.0.tar.gz results in "Failed to checksum"
MacPorts
- [MacPorts] #54493: libnetpbm 10.79.02_1 fails to build (still!) with python-3.6 -- makeman
MacPorts
- [MacPorts] #54493: libnetpbm 10.79.02_1 fails to build (still!) with python-3.6 -- makeman
MacPorts
- [MacPorts] #55881: MacVim should have variant to override system vi, vim, vimdiff, view, ex
MacPorts
- [MacPorts] #55882: libmpc @1.1.0: Checksum mismatch (was: Upgrade libmpc to mpc-1.1.0.tar.gz results in "Failed to checksum")
MacPorts
- [MacPorts] #55877: petsc-devel 3.7.4_1 +devel +openmpi_devel..: missing PETSC.pc file
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55882: libmpc @1.1.0: Checksum mismatch
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55816: lua52 @5.2.4_1 : cannot build with OS X 10.4.11
MacPorts
- [MacPorts] #55816: lua52 @5.2.4_1 : cannot build with OS X 10.4.11
MacPorts
- [MacPorts] #55868: gtk3: lazy symbol binding failed
MacPorts
- [MacPorts] #55868: gtk3: lazy symbol binding failed
MacPorts
- [MacPorts] #55868: gtk3: lazy symbol binding failed
MacPorts
- [MacPorts] #55696: Problem with updated QGIS3 port
MacPorts
- [MacPorts] #55882: libmpc @1.1.0: Checksum mismatch
MacPorts
- [MacPorts] #55883: bazel @0.5.2 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #55883: bazel @0.5.2 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #55875: octave-control @3.0.0: ld: library not found for -lgfortran
MacPorts
- [MacPorts] #55883: bazel @0.5.2 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #55883: bazel @0.5.2 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #55883: bazel @0.9.0 failed: Worker process sent response with exit code: 1. (was: bazel @0.5.2 failed: Worker process sent response with exit code: 1.)
MacPorts
- [MacPorts] #55883: bazel @0.9.0 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #55884: mandoc @1.14.3 +universal: FATAL: no endian conversion functions found
MacPorts
- [MacPorts] #55884: mandoc @1.14.3 +universal: FATAL: no endian conversion functions found
MacPorts
- [MacPorts] #55884: mandoc @1.14.3 +universal: FATAL: no endian conversion functions found
MacPorts
- [MacPorts] #55884: mandoc @1.14.3: not using the right compiler (was: mandoc @1.14.3 +universal: FATAL: no endian conversion functions found)
MacPorts
- [MacPorts] #55880: cargo: installs_libs no?
MacPorts
- [MacPorts] #55879: cargo: add universal variant
MacPorts
- [MacPorts] #55880: cargo: installs_libs no?
MacPorts
- [MacPorts] #55883: bazel @0.9.0 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #54542: gtk3 @3.22.17: error: expected '>'
MacPorts
- [MacPorts] #55794: librsvg @2.42.2 - can't build on <10.7 due to dependecy on rust
MacPorts
- [MacPorts] #52451: libfaketime @0.9.5rc3: does not build on macOS 10.12 Sierra
MacPorts
- [MacPorts] #55420: unixODBC: Update to 2.3.4
MacPorts
- [MacPorts] #55885: libphonenumber-cpp @8.9.0: checksum mismatch
MacPorts
- [MacPorts] #55886: graphene @1.8.0 is not UsingTheRightCompiler
MacPorts
- [MacPorts] #55887: Processing of port hdf5 failed
MacPorts
- [MacPorts] #55888: go @1.10: Assertion failed on Mountain Lion
MacPorts
- [MacPorts] #55887: openmpi-gcc6 @3.0.0: build failed (was: Processing of port hdf5 failed)
MacPorts
- [MacPorts] #55889: petsc 3.7.4 +sundials: configure failure
MacPorts
- [MacPorts] #55877: petsc-devel 3.7.4_1 +devel +openmpi_devel..: missing PETSC.pc file
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55868: gtk3: lazy symbol binding failed
MacPorts
- [MacPorts] #55890: [Port Abandoned] libfaketime
MacPorts
- [MacPorts] #55889: petsc 3.7.4 +sundials: configure failure
MacPorts
- [MacPorts] #54119: petsc configure python bug
MacPorts
- [MacPorts] #55877: petsc-devel 3.7.4_1 +devel +openmpi_devel..: missing PETSC.pc file
MacPorts
- [MacPorts] #55871: [Port Abandoned] arb
MacPorts
- [MacPorts] #54341: arb @6.0.4: update to 6.0.6
MacPorts
- [MacPorts] #55887: openmpi-gcc6 @3.0.0: build failed
MacPorts
- [MacPorts] #55887: openmpi-gcc6 @3.0.0: build failed
MacPorts
- [MacPorts] #55891: py-hgwatchman: Portfile missing "version" variable
MacPorts
- [MacPorts] #55891: py-hgwatchman: Portfile missing "version" variable
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55889: petsc @3.7.4+sundials: configure failure (was: petsc 3.7.4 +sundials: configure failure)
MacPorts
- [MacPorts] #55835: mdnsd @0.7G: error: non-void function 'main' should return a value (was: mdnsd fails to build on macOS Sierra 10.12.6: make: *** [mhttp] Error 1)
MacPorts
- [MacPorts] #55835: mdnsd @0.7G: error: non-void function 'main' should return a value
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #55892: osxfuse @3.7.1 Failed to build osxfuse: command execution failed
MacPorts
- [MacPorts] #55892: osxfuse @3.7.1 Failed to build osxfuse: command execution failed
MacPorts
- [MacPorts] #54939: osxfuse @3.7.1: Library not loaded: @rpath/libclang.dylib (LoadError)
MacPorts
- [MacPorts] #55892: osxfuse @3.7.1: required dylib '@rpath/libclang.dylib' not found (was: osxfuse @3.7.1 Failed to build osxfuse: command execution failed)
MacPorts
- [MacPorts] #55721: netgen-lvs: New port (was: New netgen LVS tool Portfile)
MacPorts
- [MacPorts] #46495: netgen from open circuit design
MacPorts
- [MacPorts] #55884: mandoc @1.14.3: not using the right compiler
MacPorts
- [MacPorts] #55884: mandoc @1.14.3: not using the right compiler
MacPorts
- [MacPorts] #55889: petsc @3.7.4+sundials: configure failure
MacPorts
- [MacPorts] #55889: petsc @3.7.4+sundials: configure failure
MacPorts
- [MacPorts] #55893: neomutt @20171215_1: update to 20180223
MacPorts
- [MacPorts] #55870: gtk3 @3.22.28_0+quartz "Symbol not found"
MacPorts
- [MacPorts] #55721: netgen-lvs: New port
MacPorts
- [MacPorts] #55721: netgen-lvs: New port
MacPorts
- [MacPorts] #48614: boost 1.59 with -no_single failing to build
MacPorts
- [MacPorts] #48614: boost 1.59 with -no_single failing to build
MacPorts
- [MacPorts] #55870: gtk3 @3.22.28_0+quartz "Symbol not found"
MacPorts
- [MacPorts] #55870: gtk3 @3.22.28_0+quartz "Symbol not found"
MacPorts
- [MacPorts] #55870: gtk3 @3.22.28_0+quartz "Symbol not found"
MacPorts
- [MacPorts] #55875: octave-control @3.0.0: ld: library not found for -lgfortran
MacPorts
- [MacPorts] #55875: octave-control @3.0.0: ld: library not found for -lgfortran
MacPorts
- [MacPorts] #55875: octave-control @3.0.0: ld: library not found for -lgfortran
MacPorts
- [MacPorts] #55748: rsgislib @2.1.20140825_3: build failure, update problems with Boost
MacPorts
- [MacPorts] #55894: gegl: fails to build against ffmpeg-devel
MacPorts
- [MacPorts] #55894: gegl: fails to build against ffmpeg-devel
MacPorts
- [MacPorts] #52174: h3dapi @2.3.0_1 fails to build on Mac OS 10.11.6 and 10.8.5
MacPorts
- [MacPorts] #55895: xqilla: Update to 2.3.3
MacPorts
- [MacPorts] #55896: lz4-1.8.1.2_0: ar: liblz4.a: Resource temporarily unavailable
MacPorts
- [MacPorts] #55857: boost @1.66.0_0 +universal has no i386 symbols
MacPorts
- [MacPorts] #48614: boost 1.59 with -no_single failing to build
MacPorts
- [MacPorts] #48614: boost 1.59 with -no_single failing to build
MacPorts
- [MacPorts] #55896: lz4 @1.8.1.2_0: ar: liblz4.a: Resource temporarily unavailable (was: lz4-1.8.1.2_0: ar: liblz4.a: Resource temporarily unavailable)
MacPorts
- [MacPorts] #55032: py26-smisk: depends on nonexistent py26-mako
MacPorts
- [MacPorts] #55897: py34-alembic depends on nonexistent py34-mako
MacPorts
- [MacPorts] #55032: py26-smisk: depends on nonexistent py26-mako
MacPorts
- [MacPorts] #55897: py34-alembic depends on nonexistent py34-mako
MacPorts
- [MacPorts] #55884: mandoc @1.14.3: not using the right compiler
MacPorts
- [MacPorts] #55884: mandoc @1.14.3: not using the right compiler
MacPorts
- [MacPorts] #55878: lowdown @0.3.1: Fix mandir; fix universal variant; fix build on Snow Leopard and earlier
MacPorts
- [MacPorts] #55898: ocaml-gsl @0.6.0: error: use of undeclared identifier 'caml__frame'
MacPorts
- [MacPorts] #55896: lz4 @1.8.1.2_0: ar: liblz4.a: Resource temporarily unavailable
MacPorts
- [MacPorts] #55884: mandoc @1.14.3: not using the right compiler
MacPorts
- [MacPorts] #55309: ffmpeg @3.4: ERROR: audiotoolbox requested but not found
MacPorts
- [MacPorts] #55896: lz4 @1.8.1.2_0: ar: liblz4.a: Resource temporarily unavailable
MacPorts
- [MacPorts] #54947: gutenprint @5.2.10 is flagged as Incompatible Software by High Sierra (10.13)
MacPorts
- [MacPorts] #55899: ghostscript 9.22 autoreconf failed
MacPorts
- [MacPorts] #55892: osxfuse @3.7.1: required dylib '@rpath/libclang.dylib' not found
MacPorts
- [MacPorts] #55872: gcc7 @7.3.0: Selftests fail with "Illegal instruction: 4"
MacPorts
- [MacPorts] #55872: gcc7 @7.3.0: Selftests fail with "Illegal instruction: 4"
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #55900: ngspice @27_3 Update ngspice from 26 to 27 version
MacPorts
- [MacPorts] #54947: gutenprint @5.2.10 is flagged as Incompatible Software by High Sierra (10.13)
MacPorts
- [MacPorts] #55901: libcaca: should this be removed
MacPorts
- [MacPorts] #55899: ghostscript @9.22: autoreconf: /opt/local/bin/aclocal failed with exit status: 1 (was: ghostscript 9.22 autoreconf failed)
MacPorts
- [MacPorts] #55901: libcaca: should this be removed (was: libcaca: should this be removed)
MacPorts
- [MacPorts] #55901: libcaca: should this be removed
MacPorts
- [MacPorts] #55876: matplotlib-basemap port is out of date
MacPorts
- [MacPorts] #21745: gutenprint cups variant
MacPorts
- [MacPorts] #55902: Error: Failed to checksum py34-pyqt4
MacPorts
- [MacPorts] #55876: matplotlib-basemap port is out of date
MacPorts
- [MacPorts] #55899: ghostscript @9.22: autoreconf: /opt/local/bin/aclocal failed with exit status: 1
MacPorts
- [MacPorts] #55899: ghostscript @9.22: autoreconf: /opt/local/bin/aclocal failed with exit status: 1
MacPorts
- [MacPorts] #55902: Error: Failed to checksum py34-pyqt4
MacPorts
- [MacPorts] #55893: neomutt @20171215_1: update to 20180223
MacPorts
- [MacPorts] #40570: dict: universal variant fails
MacPorts
- [MacPorts] #55902: Error: Failed to checksum py34-pyqt4
MacPorts
- [MacPorts] #55903: Qgis file missing from mirrors
MacPorts
- [MacPorts] #55902: Error: Failed to checksum py34-pyqt4
MacPorts
- [MacPorts] #55903: Qgis file missing from mirrors
MacPorts
- [MacPorts] #55903: qgis @2.18.14: file missing from mirrors (was: Qgis file missing from mirrors)
MacPorts
- [MacPorts] #55876: matplotlib-basemap port is out of date
MacPorts
- [MacPorts] #55883: bazel @0.9.0 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #55883: bazel @0.9.0 failed: Worker process sent response with exit code: 1.
MacPorts
- [MacPorts] #55869: libftdi1: add_dependencies called with incorrect number of arguments
MacPorts
- [MacPorts] #55869: libftdi1: add_dependencies called with incorrect number of arguments
MacPorts
- [MacPorts] #55869: libftdi1: add_dependencies called with incorrect number of arguments
MacPorts
- [MacPorts] #55904: restund @0.4.11: update to 0.4.12
MacPorts
- [MacPorts] #52401: Update balsa to use webkit2-gtk
MacPorts
- [MacPorts] #55905: qgis: Update to 2.18.17
MacPorts
- [MacPorts] #55905: qgis: Update to 2.18.17
MacPorts
- [MacPorts] #55905: qgis: Update to 2.18.17
MacPorts
- [MacPorts] #47281: grass @6.4.3_5: cc: No such file or directory (was: grass @6.4.3_5: does not use the right compiler)
MacPorts
- [MacPorts] #55906: qgis3: Update to 3.0.0
MacPorts
- [MacPorts] #55906: qgis3: Update to 3.0.0
MacPorts
- [MacPorts] #55906: qgis3: Update to 3.0.0
MacPorts
- [MacPorts] #55906: qgis3: Update to 3.0.0
MacPorts
- [MacPorts] #55696: Problem with updated QGIS3 port
MacPorts
- [MacPorts] #55260: QGIS and Retina display
MacPorts
- [MacPorts] #55208: Ports should require perl5.26 instead of 5.24
MacPorts
- [MacPorts] #55208: Ports should require perl5.26 instead of 5.24
MacPorts
- [MacPorts] #55582: mariadb-10.1 @10.1.29: update to 10.1.31
MacPorts
- [MacPorts] #52410: Update py27-webkitgtk to use webkit2-gtk
MacPorts
- [MacPorts] #52410: Update py27-webkitgtk to use webkit2-gtk
MacPorts
- [MacPorts] #37377: rednotebook doesn't find webkit
MacPorts
- [MacPorts] #40506: rednotebook @1.2.0_1: cannot find symbol "_xcb_str_sizeof"
MacPorts
- [MacPorts] #40570: dict: universal variant fails
MacPorts
- [MacPorts] #52410: Update py27-webkitgtk to use webkit2-gtk
MacPorts
- [MacPorts] #52410: py27-webkitgtk: remove obsolete port, no dependents (was: Update py27-webkitgtk to use webkit2-gtk)
MacPorts
- [MacPorts] #52410: py27-webkitgtk: remove obsolete port, no dependents
MacPorts
- [MacPorts] #55907: x264, bad regex?
MacPorts
- [MacPorts] #55722: farstream install fails on High Sierra, g-ir-scanner reports an unexpected -W option
MacPorts
- [MacPorts] #55722: farstream: build fails with gobject introspection enabled, g-ir-scanner reports an unexpected -W option (was: farstream install fails on High Sierra, g-ir-scanner reports an unexpected -W option)
MacPorts
- [MacPorts] #55722: farstream: build fails with gobject introspection enabled, g-ir-scanner reports an unexpected -W option
MacPorts
- [MacPorts] #55586: itstool @2.0.2: error: Python module libxml2 is needed to run this package
MacPorts
- [MacPorts] #55907: x264 @20171225: reinplace s|-falign-loops=16||g didn't change anything (was: x264, bad regex?)
MacPorts
- [MacPorts] #53784: Add support for tapi-tbd-v2
MacPorts
- [MacPorts] #55878: lowdown @0.3.1: Fix mandir; fix universal variant; fix build on Snow Leopard and earlier
MacPorts
- [MacPorts] #53784: Add support for tapi-tbd-v2
MacPorts
- [MacPorts] #55208: Ports should require perl5.26 instead of 5.24
MacPorts
- [MacPorts] #55208: Ports should require perl5.26 instead of 5.24
MacPorts
- [MacPorts] #53669: ghostscript @9.19: Warning: reinplace s|#!/usr/bin/perl|#!/opt/local/bin/perl| didn't change anything in /opt/local/var/macports/build/
MacPorts
- [MacPorts] #55286: gr-lora: Don't change the version in a variant
MacPorts
- [MacPorts] #55208: Ports should require perl5.26 instead of 5.24
MacPorts
- [MacPorts] #55908: python27 @2.7.14: urlopen() with HTTPS fails with CERTIFICATE_VERIFY_FAILED
MacPorts
- [MacPorts] #55909: mariadb-10.2 @10.2.12: opportunistic use of numerous libraries and programs
MacPorts
- [MacPorts] #55884: mandoc @1.14.3: not using the right compiler
MacPorts
- [MacPorts] #55086: clang-4.0 w/ trace mode: Error running link command: Invalid argument (cmake bug?)
MacPorts
- [MacPorts] #55910: mariadb-10.0: Update to 10.0.34
MacPorts
- [MacPorts] #55911: mariadb: Update to 5.5.59
MacPorts
- [MacPorts] #55878: lowdown @0.3.1: Fix mandir; fix universal variant; fix build on Snow Leopard and earlier
MacPorts
- [MacPorts] #51141: Consider building Python with +ucs4 by default
MacPorts
- [MacPorts] #55912: percona: Update to 5.6.39-83.1
MacPorts
- [MacPorts] #55487: mysql57: Update to 5.7.21 (was: mysql57: Update to 5.7.20)
MacPorts
- [MacPorts] #55488: mysql56: Update to 5.6.39 (was: mysql56: Update to 5.6.38)
MacPorts
- [MacPorts] #55489: mysql55: Update to 5.5.59 (was: mysql55: Update to 5.5.58)
MacPorts
- [MacPorts] #55913: mariadb-10.2: fatal error: 'unordered_map' file not found
MacPorts
- [MacPorts] #55914: mariadb-10.1, mariadb-10.2: error: ‘strnlen’ was not declared in this scope
MacPorts
- [MacPorts] #55915: mariadb-10.2 @10.2.12: clang: error: unknown argument: '-fwhole-program'
MacPorts
- [MacPorts] #55916: mariadb-10.3 should be created
MacPorts
- [MacPorts] #55915: mariadb-10.2 @10.2.12: clang: error: unknown argument: '-fwhole-program'
MacPorts
- [MacPorts] #55198: ffmpeg @3.4: ld: cannot link directly with /System/Library/Frameworks//CoreImage.framework/CoreImage
MacPorts
- [MacPorts] #55908: python27 @2.7.14: urlopen() with HTTPS fails with CERTIFICATE_VERIFY_FAILED
MacPorts
- [MacPorts] #55908: python27 @2.7.14: urlopen() with HTTPS fails with CERTIFICATE_VERIFY_FAILED
MacPorts
- [MacPorts] #55198: ffmpeg @3.4: ld: cannot link directly with /System/Library/Frameworks//CoreImage.framework/CoreImage
MacPorts
Last message date:
Wed Feb 28 23:05:34 UTC 2018
Archived on: Wed Feb 28 23:05:36 UTC 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).